Latest temperature meter Tenders | Government temperature meter Tenders

CTN :45559939

30 Jun, 2026 22.40 Lacs

Sonipat - Haryana

Tender For supply of deflection of curved member apparatus , shear centre apparatus , portal frame apparatus , two hinged arch apparatus , cable geometry and statics apparatus , unsymmetrical bending apparatus , bending moment and shear force apparatus , maxwell reciprocal theorem apparatus , deflection of continuous beam apparatus , slope and deflection apparatus , behaviour of column and beams apparatus , elastic properties of deflection beam apparatus , two hinged arch apparatus , analysis of elastically coupled beam apparatus , pin joint truss apparatus , analysis of redundant joint apparatus , discharge over notches apparatus , pitot tube setup , impact of jet on vanes apparatus , digital handheld water velocity meters , tilting open bed flow channel flume , automatic traffic classification and counting counter , length gauge with isi certification mark is 2386 part i , speed gun speedster iii , gopro hero camera with tripod stand , thickness gauge with isi certification mark is 2386 part i , 75 mm sieve , 63 mm sieve , 50 mm sieve , 37 point 5 mm sieve , 25 mm sieve , 12 point 5 mm sieve , 9 point 5 mm sieve , 4 point 75 mm sieve , 2 point 36 mm sieve , gi pan and lid , 1 point 18 mm sieve , 600 micron sieve , 300 micron sieve , 150 micron sieve , 75 micron sieve , brass pan and lid , aggregate impact tester is 2386 part iv , crushing value apparatus is 2386 part iv , bitumen penetration kit is 1203 , flash point open and fire point cleveland is 1448 part 69 , ring and ball apparatus semi automatic is 1205 * /bid number : gem/2026/b/7615986 + /dated: 15-06-2026 ' ' / bid document 1 / 30

Central Government / Public Sector

CTN :45469503

20 Jun, 2026 NA

Jagatsinghapur - Odisha

Tender For supply of laser shaft alignment machine , laser belt alignment machine , vibration pen cmvp50 , noncontact temperature meter, max 1000 c

CTN :45408307

11 Jun, 2026 NA

Jamnagar - Gujarat

Tender For supply of pneumatic frl 1 oblique 2 inch , socket 12mm , adaptor , gi pipe 1 oblique 2 inch , socket 1 oblique 2 inch , valve on off , portable electric welding machine , humidity temperature meter , drill bit size no 05, 06 and 08

State Government

CTN :45368001

05 Jun, 2026 NA

Bhopal - Madhya Pradesh

Tender For quotations for calibration of various equipments of regional meter testing laboratory -reference standard meters ,1nos. of make zera class-0.02s, bench id 10907 with msvt ,1 nos. of make zera class- 0.02s, bench id 0043736 with ict, msvt and scanner ,1 no. of make zera class-0.01s, bench id 12856 with msvt ,1nos. of make zera class- 0.02s(semi-automatic) bench id, mpbp001 ,1 no. of make -rts class- 0.04s, bench id 300554 ,1 no. of make -kigg class-0.05s, bench id hc2018113002 ,digital frequency meter ,digital temperature meter ,digital stop watch ,three phase portable reference standard meter ,distortion factor (of test bench output) ,flux density measurement (at the test bench position) ,high voltage testing kit ,burden measurement unit ,lux meter

CTN :45361596

19 Jun, 2026 NA

Mumbai - Maharashtra

Tender For tender for supply of cover gear case , gasket cooler case , gasket bend , gasket bonnet , gasket manifold , joint rubber 32 38 , gasket head t 1 4 , joint rubber 38 , hose air duct , gasket intercooler , pipe turbine outlet , hose mixing inlet , hose fresh water , hose manifold out , hose sea water , hose turbine inlet , hose gear inlet , hose gear outlet , joint pipe , harness wire , hose oil pump sub , pipe turbine inlet , hose thrmo inlet , hose fuel l 475 , camshaft assy , relay starter , fuel pump assembly , gasket turbine out , o ring , sensor , sensor oil pressure , seal oil , filter breather , gear crankshaft , o ring bearing , switch temperature , gasket silencer , filter assembly fuel strainer , harness wire 6m , meter temperature , meter , harness panel , o ring 1ap36 0 , o ring 1as135 0 , cotter 9 , block assy cylinder , gasket set , head assy cylinder

CTN :45360624

10 Jun, 2026 12.29 Lacs

Ranchi - Jharkhand

Tender For repairing of 02 nos. 11kv, 10a ngr and one no. 3.3 kv, 10a, ngr with replacement of winding and temperature meter and buchhloz relay of 03 no. transformer installed at 22.5 mva, 33kv/11kv-3.3kv old substation under kdh ocp, nk area

CTN :45316034

06 Jun, 2026 10.53 Lacs

Giridh - Jharkhand

Tender For so(enm)/grd/e-nit/26-27/13 dtd- 25.05.2026 - minor repairing & maintenance work of 2 nos.3mva, 33 kv/11 kv transformer installed at main central substation beniadih andestimate for leak proof, oil filtration denting & painting of 01 no. 3 mva, 33kv/11 kvtransformer installed at kabribad mines substation giridih area., supply of auxiliary relay 110v, supply of oil temperature meter with cable, supply of winding temperature meter with cable, supply of electronic buzzer hooter, supply of breather, replacement of silica gel, 2.5 sq.mm 4c frls cable, 1.5 sq mm 7c frls cable, replacement of top cover gasket/crok sheet, denting and painting of 33kv/11kv transformer for material and labour changes., filtaration of transformer oil and conservator tank, dismantling, transportation and erection of power transformer with other accessories, supply of leak proof material with labour charges, total impact of gst for the purpose of ctc

State Government

CTN :45178645

28 May, 2026 4.00 Lacs

Vidisha - Madhya Pradesh

Tender For corrigendum : oti meter, round shap oil temperature meter 0 to 120 with 5 mtr capulary make ecko/and other equavalent., wti meter, round shap winding temperature meter 0 to 120 with 5 mtr capulary make ecko/and other equavalent., power clamp, for power bi- metelic clamp of brass flat (50*50*10mm)., ac voltage meter, ac volt meter rang 0 to 300 volt hz. 50-60 , dc voltage meter, ac volt meter rang 0 to 50 volt. , dc amp meter, dc amp meter for battery charger 30v/0-20 amp., bridge rectifier, kbpc 3510, 1 kv 35a single phase bridge rectifier diode., on-off handel, for control pannel. baimetallic clamp for ct., kit-kit unit fuse, 16 amp for ac dc volt. , mcb, 16 amp for panel.

State Government

CTN :45245312

05 Jun, 2026 NA

Sagar - Madhya Pradesh

Tender For name of work: e-tender for the procurement of materials for use in nurseries under the units of the sagar social forestry circle - 1” braided water hose pipe (length: 30 meters) , monoblock motor: 1 hp, 2-phase , monoblock motor: 2 hp, 2-phase , monoblock motor: 3 hp, 3-phase , monoblock motor: 5 hp, 3-phase , monoblock motor: 7.5 hp, 3-phase , submersible motor: 1 hp, 2-phase , submersible motor: 2 hp, 2-phase , submersible motor: 3 hp, 3-phase , submersible motor: 5 hp, 3-phase , submersible motor: 7.5 hp, 3-phase , submersible motor: 10 hp, 3-phase , submersible pump: 2 hp, 2-phase , submersible pump: 3 hp, 3-phase , submersible pump: 5 hp, 3-phase , submersible pump: 7.5 hp, 3-phase , submersible pump: 10 hp, 3-phase , c-clamp type hdpe pipe (length: 20 feet), diameter: 1.5” , c-clamp type hdpe pipe (length: 20 feet), diameter: 2” , c-clamp type hdpe pipe (length 20 ft), dia 2.5" , c-clamp type hdpe pipe (length 20 ft), dia 3" , t-bend 2.5" , l-bend 2.5" , t-bend 3" , l-bend 3" , end cap 2.5" , washer 2.5" , washer 3" , diesel engine pump 5 hp , diesel engine pump 7.5 hp , hdpe rolled pipe, dia 1.5" , hdpe rolled pipe, dia 2" , hdpe rolled pipe, dia 2.5" , hdpe rolled pipe, dia 3" , plastic nozzle for sprinkler 3/4" , brass nozzle for sprinkler 3/4" , g.i. riser pipe for sprinkler 3/4" , g.i. socket for sprinkler 3/4" , g.i. foot button for sprinkler , g.i. socket 3/4" , covering/cladding material: structure covered with uv-stabilized hdpe / polycarbonate multilayer sheet , screen filter for fogger system , booster pump , temperature meter , 16 mm lateral line , 4-way fogger , exhaust fan (30" dia) , honeycomb pad for cooling system , g.i. round pipe 1" , g.i. round pipe 1.5" , g.i. round pipe 2" , g.i. round pipe 2.5" , iron sieve (for sand) 3x6 ft (with wooden frame) , dhanzyme fertilizer , d.a.p. , n.p.k. , chlorpyrifos 20% ec , fungicide (bavistin powder) , petrol-operated spray pump (20 liters) skid steer loader , gi pan (tagari) – 15-inch , plastic pan (tagari) – 20-inch , shovel (with ms handle) , hand trowel (khurpi) , watering can , pickaxe , crowbar – 25 mm x 5 ft , double-wheel barrow trolley (ms) – size: 600 x 480 x 600 mm , nylon rope – 12 mm dia. (for borewells) , nylon rope – 10 mm dia. (for borewells) , gi pipe – 2.0 inch (for borewell use) , earthworms (species: *eisenia fetida*) , pvc casing pipe – 6-inch , pvc casing pipe – 8-inch , ro water filter (with cooler; capacity: 40 liters) , gi profile strip – length: 4 meters , gi (galvanized iron) zigzag spring , 2-way fogger , polysheet 200 micron, 800 gauge , 40 mm perforated rainpipe (length 100 m) , 40 mm jointer pipe (pvc) , mta 32 mm x 40 mm (pvc) , end cap 40 mm (pvc) , mta cock 32 mm x 40 mm , 45 mm perforated rainpipe (length 100 m) , 2.5" adapter, c-clamp type (hdpe) , 2.5" sprinkler pipe head (hdpe) , 2.5" sprinkler pipe tail (hdpe) , black polythene bag (size 15x25, 250 gauge) , white polythene bag (size 15x25, 400 gauge) , black polythene bag (size 15x25, 400 gauge) , white polythene bag (size 20x30, 400 gauge) , black polythene bag (size 20x30, 400 gauge) , black ldpe sheet , vermicompost bag, 100g, printed (size 22x36 inches; capacity 50 kg) , neem bag, 100g, printed (size 22x36 inches; capacity 50 kg) , green net (shade net) — 50% shade , green net (shade net) — 75% shade , green net (shade net) — 95% shade , chain-link fencing — 1.5 m , chain-link fencing — 2 m , chain-link fencing — 2.5 m , barbed wire , angle iron 50x50x5 mm — 2 m , angle iron 50x50x5 mm — 2.5 m angle iron 50x50x5 mm, 3 mtr , iron rebar (reinforcement bar) 6 mm , iron rebar 8 mm , iron rebar 10 mm , iron rebar 12 mm , m.s. pipe 1"x1" , m.s. pipe 1.5"x1.5" , m.s. pipe 2"x2" , m.s. pipe 2.5"x2.5" , m.s. pipe 3"x3" , cement (bag weight: 50 kg) , sand (for construction) , crushed stone aggregate (40 mm) , crushed stone aggregate (20 mm) , crushed stone aggregate (6 mm) , bricks (kiln-fired) , g.i. profile sheet , vitrified tiles (4"x2") (glossy double charge) thickness 9-10 mm,

State Government

CTN :45216240

20 May, 2026 NA

Vidisha - Madhya Pradesh

Tender For supply of oti meetr, round shap oil temperature meter 0 to 120 with 5 mtr round shap winding capulary make ecko and other equavalent, wti meter, temperature meter 0 to 120" with 5 mtr capulary make ecko and other equavalent.. power clamp, for power bi-metelic clamp of brass flat (50*50*10mm), ac voltage meter, ac volt meter rang o to 300 volt hz.50-60, dc voltage meter, dc volt meter rang o to 50 volt, dc amp meter dc amp meter for battery charger 30v /0-20amp, bridge rectifier, kbpc 3510, 1 kv 35a single phase bridge rectifier diode electronic components, on-off handel, for control panel, baimetallic clamp for ct, kit-kit unit puse, 16 amp, for ac dc volt, mcb, 16 amp for panel.

Temperature Meter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

State Government

State Government

State Government

State Government