Latest temperature monitor Tenders | Government temperature monitor Tenders

CTN :45711096

03 Jul, 2026 NA

Parganas - West Bengal

Tender For spare parts of scania - hose part no 283136, dust cover part no 190335, seal ring part no 214309, seal ring part no 164900, hose part no 811195, hose part no 188283, control part no 1104198, dash board lock part no nk, head light assy part no 389483, cover part no 310518, plate scania part no 352140, rear toe lock part no nk, lmg bracket part no nk, screw m8x16 part no 808293, oil dipstick (eng ) part no 271225, intermediate part part no 219516, filler tube part no 257754, drain cock (tap) part no 228491, hollow screw part no 17146, hollow screw part no 17384, fuel tank part no 292781, hollow union part no 377424, lock ring part no 804787, piston ring part no 244186, plug part no 244465, plug part no 129386, drive part no 389606/389672, piston part no 367124, disk, outer part no 194428, disc, inner part no 194429, lock ring part no 804793, switch part no 328655, cover part no 317203, intermediate piece part no 254757, regul. valve, front part no 390485, regul. valve, rear part no 390487, elbow connection part no 161901, temperature monitor part no 334383, shim 0, 5 mm part no 274416, drain tube part no 224266, solenoid valve part no 1115802(350127), elbow connector part no 208405, reducing nipple part no 244439, sensor(speed) part no 284154, oil cooler part no 391173, connector part no 275052, journal part no 264043, lubricator part no 806311, three-way nipple part no 248351

CTN :45714938

13 Jul, 2026 1.40 Lacs

Rampur-Up - Uttar Pradesh

Tender For tender for supply of repairing overhauling , calibration recommising of multichannel temperature indications , rewiring commissining of digital display system , repairing , calibration & commissining of high/low alarm system on boilers , repairing calibration commissining of steam measurement system , repairing rewiring calibration of super heated steam temp monitoring , reparing calibration of differential pressure transmitter , reparing calibration of flow indicator cum totalizer , repairing calibration commissining of steam measurement system , repairing calibration of old pid controller , amc of various wiring commissioning of temp monitoring point , air filter , onoff control valve , wheel valve , brass adapter , onoff digital controller , solonoid valve , temp compensating cable , temp sensors , needle valve size , installation commissioning , air filter , onoff pneumatic control valve , wheel valve , instrument cable , pid controller level indicator , solonoid valve , temperature gauge , high pressure pipe , oil pocket thermowells , digital temp indicator , pressure gauge , pressure gauge , pressure gauge , vacuum gauge , temperature gauge , socket

CTN :45640501

29 Jun, 2026 NA

Darjeeling - West Bengal

Tender For bid to ras supply of live remote temperature and humidity monitoring and alert system (q3)

State Government

CTN :45669079

08 Jul, 2026 7.24 Lacs

Amreli - Gujarat

Tender For installation of various instruments and monitoring system at vadi irrigation scheme - supplying, installing, testing, and commissioning of a v-notch weir mechanical flow measuring device) for measuring low flow seepage in dams. the device shall have a notch angle of 22.5°, 45°, 60°, or 90° depending on discharge range, a stainless steel ss-304 / ss-316 plate with thickness of 3–5 mm, and be suitable for measurement ranges of approximately 0–50 l/s depending on notch angle. the weir shall have ±1% full-scale reading accuracy, operate under 5–100% humidity, temperature −20°c to +60°c, and provide corrosion protection through anti-corrosion finish. complete in all respects as directed by the engineer-in-charge.with different sizes mentioned below: (1) 90° vnotch- 20 x 40 secticin 15 lit/sec, providing, installing and commissioning permanent ground control point (gcp) settlemnt marker comprising ms base plate (250×250×5 mm conforming to is 2062), gi riser pipe 25 mm dia (medium class as per is 1239), sand filling (clean river sand, loose), optional pvc/gi outer casing (min 100 mm dia), precast concrete cover (m20, 500×500×50 mm with central hole), ms/gi reference cap, and painting in black & white checkerboard pattern using weather-resistant enamel paint, complete with excavation, installation, alignment, and all materials, labour, tools, and accessories, suitable for survey works using total station / drone survey, complete as per specifications and direction of engineer-in-charge., providing & laying in position 'nominal mix' cement concrete using cement sand and crushed aggregate by machine mix incl. necessary formworks ,centering ,scaffolding compaction by mechanical vibrator curing as directed with all lead & lift etc (c) concrete grade 1:2:4 and msa-40mm(graded))

State Government

CTN :45669080

08 Jul, 2026 5.38 Lacs

Amreli - Gujarat

Tender For installation of various instruments and monitoring system at thebi irrigation scheme - supplying, installing, testing, and commissioning of a v-notch weir (mechanical flow measuring device) for measuring low flow seepage in dams. the device shall have a notch angle of 22.5°, 45°, 60°, or 90° depending on discharge range, a stainless steel ss-304 / ss-316 plate with thickness of 3–5 mm, and be suitable for measurement ranges of approximately 0–50 l/s depending on notch angle. the weir shall have ±1% full-scale reading accuracy, operate under 5–100% humidity, temperature −20°c to +60°c, and provide corrosion protection through anti-corrosion finish. complete in all respects as directed by the engineer-in-charge.with different sizes mentioned below: (1) 90° vnotch- 20 x 40 secticin 15 lit/sec, providing, installing and commissioning permanent ground control point (gcp) settlemnt marker comprising ms base plate (250×250×5 mm conforming to is 2062), gi riser pipe 25 mm dia (medium class as per is 1239), sand filling (clean river sand, loose), optional pvc/gi outer casing (min 100 mm dia), precast concrete cover (m20, 500×500×50 mm with central hole), ms/gi reference cap, and painting in black & white checkerboard pattern using weather-resistant enamel paint, complete with excavation, installation, alignment, and all materials, labour, tools, and accessories, suitable for survey works using total station / drone survey, complete as per specifications and direction of engineer-in-charge., providing & laying in position 'nominal mix' cement concrete using cement sand and crushed aggregate by machine mix incl. necessary formworks ,centering ,scaffolding compaction by mechanical vibrator curing as directed with all lead & lift etc (c) concrete grade 1:2:4 and msa-40mm(graded))

State Government

CTN :45680270

16 Jul, 2026 NA

Kheda - Gujarat

Tender For supply of various instruments for chp & bop area of wtps unit 8. - over travel limit switch (otls), make: electromag methods, model:- elotc/2no2nc, amps: 40 / 10, voltage: 500 vac, c/s: 50, ag make heavy duty limit switch type : hls/ii. contacts : 2 no + 2 nc rating : 25 amps @ 415 v.ac enclosure : die casting aluminum (lm-6) gasket : nitrile rubber gasket reset : auto reset type, digital pressure gauge: range: 0 to 100 kg/cm2, zero speed switch, make: protocontrol instruments pvt. ltd, model: esm b2, sensing range: 15-17mm, supply: 220vac , range: 10 -100 rpm, wire: 2 wire, ppr: 4, cable length: 2 meter (mininum), sr no: 15j252., inductive proximity switch, sensing distance: 25mm, supply: 230v ac, dimension: 50mm x 110mm., zss controller with sensor probe set, make: jayashree, speed setting: 100 to 1000 rpm, 4 imp rev,2no + 2nc,5a @ 240v ac, supply voltage:90-250v ac, sensor probe model: sp 12 b 30*65 10 m, termination: 3 wires dc., chlorine leak detector - single sensor for model no. 5002, range : 0 to 5 ppm of chlorine,make: perfect chloro system, magnesium anode rod, length: 30 cm, diameter:- 1/2 (half) inch., pressure gauge, 0-16 kg/cm2, bourdon with tantalum/monel or better diaphragm seal, chlorine service, body : ss316lor suitable, dial :150mm+/-10 percent, accuracy:class 1, process connection 1/2 in. npt(m) direct bottom entry, ip65, pressure gauge, 0-21 kg/cm2, bourdon with tantalum/monel or better diaphragm seal, chlorine service, body:ss316l or suitable, dial:150mm+/-10 percent, accuracy:class 1, process connection 1/2 in. npt(m) direct bottom entry, ip65, pressure gauge dial size 150mm with range 0-10 kg./cm2, temperature gauge, 0 to 160 deg c, bi -metal strip coiled, dial 150mm, +/- 1 percent fsd accuracy, 12mm stem dia, 100mm stem length, ss304 case, neoprene gasket, 1/2 inch npt(m) process connection, 1/2 inch npt (m) adjustable to thermowell, rtd pt 100, duplex, sheath dia. 6 mm, sheath length 150 mm, ag make proximity switch, model: ps 2000d, input power : 24 vdc, proximity dia : m50, sensing dist : 16 mm-25mm, 4 wire type, wire length : 5 mtrs, contact: 1no+ 1nc., pointer puller for pressure gauges, electronic speed switch monitoring unit with indictive sensor probe, 10-100 rpm, 4 digit speed indication, 90-250v ac supply, accuracy : +/-5 percent, calibration 4 imp / rev, 1-20s itd & ntd, ip65, pressure switch ,range 0.6 to 6 kg/sqcm, pressure switch range : 1 to 10 bar, pressure switch, range 1.6 to 16 bar, type : bellow, connection : 1/2" npt, bottom entry, vacuum switch low, (-760 to 0)mmhg, diapragm seal tantalum/monel or better for chlorine service, body-ss316l or suitable, die cast aluminium or better enclosure, accuracy : +/-0.5 percent, process connection:1/2 in. npt(m), 2spdt, ip66, pressure switch, 0.3-1.6 kg/cm2, tantalum/monel or better diaphragm seal, chlorine service, body-ss316lor suitable,die cast aluminium or better enclosure, repeatability : +/-1 percent , process connection : 1/2 in. npt(m), 2spdt, ip66, vacuum gauge, (-760 to 0) mm hg, bourdon with tantalum/monel or better diaphragm seal, chlorine service, body:ss316l or suitable, dial:150mm+/-10 percent, accuracy:class 1, process connection 1/2 in. npt(m), ip65, pressure gauge 0-6 kg/cmsq, pressure gauge 0-10 kg/cm2, pressure gauge range 0-16 kg/cm2 size 100 mm, over travel limit switch (otls), make: electromag methods, model:- elotc/2no2nc, amps: 40 / 10, voltage: 500 vac, c/s: 50, ag make heavy duty limit switch type : hls/ii. contacts : 2 no + 2 nc rating : 25 amps @ 415 v.ac enclosure : die casting aluminum (lm-6) gasket : nitrile rubber gasket reset : auto reset type, digital pressure gauge: range: 0 to 100 kg/cm2, zero speed switch, make: protocontrol instruments pvt. ltd, model: esm b2, sensing range: 15-17mm, supply: 220vac , range: 10 -100 rpm, wire: 2 wire, ppr: 4, cable length: 2 meter (mininum), sr no: 15j252., inductive proximity switch, sensing distance: 25mm, supply: 230v ac, dimension: 50mm x 110mm., zss controller

CTN :45695048

06 Jul, 2026 NA

Budgam - Jammu And Kashmir

Tender For supply of automatic temperature/humidity monitoring system

CTN :45647961

02 Jul, 2026 NA

Leh - Jammu And Kashmir

Tender For supply of dry storage cabinet for equipments , adopter for hyd rig , gauge stand for temperature monitoring , hammer hf , hand rotary self dispense fuel pump

CTN :45638087

03 Jul, 2026 NA

Howrah - West Bengal

Tender For supply of probe (sensor) temperature monitoring with magnet and cable as per specification: temperature sensor: rtd pt100, accuracy: 0.1 degree centigrade, operating limit of sensor probe: 0 to 150 degree centigrade, magnetic arrangement for sensor holding teflon cable: 06m. make/brand: silcore or micro tech or similar. [ warranty period: 30 months after the date of delivery ] ]

CTN :45640235

29 Jun, 2026 5.63 Lacs

Delhi - Delhi

Tender For maintenance of electrical installation & fans in nscs at sardar patel bhawan, new delhi. (sh : providing wireless busbar temperature monitoring system for lt panels at sub station.)

Temperature Monitor Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government