Latest temporary structure Tenders | Government temporary structure Tenders

State Government

CTN :40784440

27 Jun, 2025 5.62 Lacs

Sundernagar - Himachal Pradesh

Tender For tender for demolishing rcc work repair to plaster providing double scaffolding system in ebiv qtrs block no1 to 4 ebiii qtrs block no 1 to 3 plinth protection in ebiv block no 4 in hpsebl colony at sundernagar

State Government

CTN :39879071

03 Jul, 2025 8.65 Lacs

Kheda - Gujarat

Tender For corrigendum : work contract for bah and seal through puncture repairing, refractory applying, boiler outside/inside scaffolding, valve overhauling/servicing and other miscellaneous works on as and when required basis of unit-4, 5, 6 and 7 at wanakbori tps.

CTN :40614510

24 Jun, 2025 2.31 Crore

Panipat - Haryana

Tender For corrigendum : erecting maintaining and dismantling scaffolding system as per safety standards and eil spec at various elevations by providing all materials for composite work for avu units part a for panipat refinery expansion project of iocl at panipat haryana

Central Government/Public Sector

CTN :40753822

25 Jun, 2025 NA

Katipala - Karnataka

Tender For providing of repair and overhauling service - blinding / spading of connected piping flanges, opening of manways, cleaning, testing,boxup and deblinding of columns, vessels, seal pots and filters of phase-3 sru includingsupply & supervision of manpower with all necessary tools, tackles, equipment,consumables, scaffolding materials and transportation, during the shutdown as per thedetailed scope of work and scope of supply.

CTN :40534248

23 Jun, 2025 3.97 Crore

Kolkata - West Bengal

Tender For corrigendum : supply and application of insulation materials on pipe, equipment for part a and part b as per standard specification by providing all required materials in connection with the composite work for setting upof hpg-2, butene-1 and psa units atlepetkata - legends / notes for insulation workstypes of insulation : ih = insulation for heat conservation it = insulation for steam traced lines is = insulation for personal safety ic = cold insulation for anti-condensation ie = insulation for electrically traced lines ij = insulation for jacketed lines ik = insulation for dual insulated lines basic line surface materials : cs = carbon steel (including lt carbon steel), as = alloy steel, ss = stainless steelnotes :1. for insulation type it,tracer size and tracer numbers shall be as per specification.2. insulation thickness for ic where insulation material is poly urethane foam (puf) / poly isocyanurate (pic) + cellular glass includes outer layer of 50mm of cellular glass and inner layer of balance thickness of puf/pic.3. insulation for ie consists of inner layer of rockwool and outer layer of puf / pic. the thicknesses have been specified as thk(i) and thk(o) for inner and outer layers respectively., part a, hot insulation (units)providing thermal insulation including supply of all insulating and ancillary materials, vapour barrier, weather protective coverings, consumables and other necessary materials , testing of materials as required, including transportation of materials to work site, duly inspected by 3rd party inspector(llyods/bv/dnv or any other client approved party) at manufacturers shop & sample check/inspection at site by eil construction inspector, applying insulation on surfaces as specified including all preparatory work there on, binding, tying, lacing, stitching and/or otherwise securing , finishing with sheet cladding as per spec. , providing bolts, rivets, and self tapping screws wherever specified , providing inspection windows, end seals for flanges etc., colour coding and identification. providing steel scaffolding, all tools , tackles , equipments etc. , labour, supervision and completing the work in all respect, at all heights as per drawings , specifications and instructions of engineer-in-charge. (refer legend for applicable eil specification), insulation type : ih ; surface material : cs & as ; operating temp. range : upto 125 (deg c) ; insulation material : rockwool, pipes, nb 00.75 inches; thickness 25 mm, nb 01.00 inches; thickness 25 mm, nb 01.50 inches; thickness 25 mm, nb 02.00 inches; thickness 25 mm, nb 03.00 inches; thickness 25 mm, nb 04.00 inches; thickness 25 mm, nb 06.00 inches; thickness 25 mm, blind flange assemblies, nb 00.75 inches; thickness 25 mm, nb 02.00 inches; thickness 25 mm, valve assemblies, nb 00.75 inches; thickness 25 mm, insulation type : ih ; surface material : cs & as ; operating temp. range : 126 (deg c) to 350 (deg c) ; insulation material : rockwool, pipes, nb 00.50 inches; thickness 25 mm, nb 00.50 inches; thickness 40 mm, nb 00.75 inches; thickness 25 mm, nb 00.75 inches; thickness 40 mm, nb 00.75 inches; thickness 50 mm, nb 01.00 inches; thickness 25 mm, nb 01.00 inches; thickness 40 mm, nb 01.00 inches; thickness 50 mm, nb 01.50 inches; thickness 25 mm, nb 01.50 inches; thickness 40 mm, nb 01.50 inches; thickness 50 mm, nb 02.00 inches; thickness 25 mm, nb 02.00 inches; thickness 40 mm, nb 02.00 inches; thickness 50 mm, nb 02.00 inches; thickness 65 mm, nb 03.00 inches; thickness 25 mm, nb 03.00 inches; thickness 40 mm, nb 03.00 inches; thickness 50 mm, nb 03.00 inches; thickness 65 mm, nb 04.00 inches; thickness 25 mm, nb 04.00 inches; thickness 40 mm, nb 04.00 inches; thickness 65 mm, nb 06.00 inches; thickness 40 mm, nb 06.00 inches; thickness 65 mm, flange assemblies, nb 01.50 inches; thickness 25 mm, nb 01.50 inches; thickness 50 mm, nb 02.00 inches; thickness 25 mm, nb 02.00 inches; thickness 40 mm, nb 02.00 inches; thickness 50 mm, nb 03.00

Central Government/Public Sector

CTN :40746664

08 Jul, 2025 49.00 Lacs

Jammu - Jammu And Kashmir

Tender For periodical services(internal) including repairs to flooring,sanitary and plumbing items works in otm and md accn at ridge, raulki area under age b/r-i of ge satwari - notes : (1) work will be carried out upto 4th storey of bldgs and quoted rates of items shall be deemed to include the cost of necessary formwok and scaffolding required as per site conditions., taking down shutters of any description exc 1.00 sqm and not exc 2.00 sqm each and removing from the site complete all as specified & directed., taking down chowkats or frames with shutter (without taking off shutter from the frame) n. exc 1.5 sqm each including cutting holes for taking out hold fast or dismantling brick work and removing from site complete all as specified and directed., taking down chowkats or frames with shutter (without taking off shutter from the frame) exc 1.5 sqm & n. exc 4 sqm each including cutting holes for taking out hold fast or dismantling brick work and removing from site complete all as specified and directed., demolition of cement concrete (un-reinforced) in ground floor to 4th floor and pavings n exc 15 cm thickness (below or above ground level ) and removing the rubbish from the work site to out side defence premises complete all as specified and directed., demolition of concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed., taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubing down with water etc and removing unserviceable material outside defence land complete all as specified and directed., dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed, s&f pressed steel frames of size 125mm x 60 mm made out of size 1.25 mm thick ms sheet for doors with one or more rebates including mild steel hinges, 100 mm long , medium weright and 25 mm x 3 mm flat iron as in hold fast , tie bar including necessary fixing lugs, lock strike plate and fixing arrangement and making good the disturbed surfaces in cement mortar 1:3 or cement concete 1:2:4 type b-1 including pcc 1:3:6 type c1 as in back fill to chowkats complete all as specified and directed., s&f pressed steel frames of size 105mm x 60 mm made out of size 1.25 mm thick ms sheet for doors with one or more rebates including mild steel hinges, 100 mm long , medium weright and 25 mm x 3 mm flat iron as in hold fast , tie bar including necessary fixing lugs, lock strike plate and fixing arrangement and making good the disturbed surfaces in cement mortar 1:3 or cement concete 1:2:4 type b-1 including pcc 1:3:6 type c1 as in back fill to chowkats complete all as specified and directed., s&f 35 mm thick factory made 2nd class hard wood, plain, framed, panelled shutters (two panels) with lock rail and panel of 9mm thick bwp commercial plywood .the size of rail and stiles as per is: 1003(part-1), kiln seasoned and chemically pressure treated, fitted to chowkats complete all as specified and directed., s&f factory made 35 mm thick 2nd class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in ssr part i, section 8, clause 8.24 (a); fitted to chowkats complete all as specified and directed, m&l for 30mm thick factory made flush shutters, solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed., s&f in repair solid pvc door frame of size 50mm x47mm made out of 5mm plain colour pvc sheet reinforced with mild steel square tube, supplying and fixing in opening as per specifi

Central Government/Public Sector

CTN :40710402

20 Jun, 2025 NA

Coochbehar - West Bengal

Tender For repair and maintenance of govt buildings sh temporary structure used as mandir 120 men barrack at campus azadnagaar under shq bsf cbr

CTN :40710921

26 Jun, 2025 95.09 Lacs

Vadodara - Gujarat

Tender For carry out staging work by supplying steel scaffolding pipe clamps plunk base plate etc and for iocl gujarat refinery vadodara

CTN :40739611

24 Jun, 2025 10.34 Lacs

Yelandur - Karnataka

Tender For yelandur taluk kesthur gp kesthur village swm sheed construction work supply of meterials - portland cement,,.,,.yk, enamel paint,,.,,.yk, coarse sand (zone iii),,.,,.yk, display board ,,.,,.yk, plasticizer super plasticizer,,.,,.yk, binding wire,,.,,.yk, formwork, centering & scaffolding for columns piers - 10,.,,.yk, bond stone 20 x 20 x 45 cm,,.,,.yk, boulders,,.,,.yk, broken granite metal 10 mm,,.,,.yk, broken granite metal 12.5 mm,,.,,.yk, broken stone aggregate 12 mm to 10 mm size,,.,,.yk, broken stone aggregate 20 mm size,,.,,.yk, broken stone aggregate 40 mm size,,.,,.yk, burnt bricks class 35 (non modular),,.,,.yk, casurina poles 100 - 150 mm,,.,,.yk, corbon electrodes,,.,,.yk, enamel metal paint,,.,,.yk, handles,,.,,.yk, jungle wood runners and planks,,.,,.yk, mathinandi wood planks for panels 25 mm thick,,.,,.yk, mathinandi wood scantling,,.,,.yk, mullion section,,.,,.yk, ready mix primer paint (ready mix red lead paint),,.,,.yk, reeded glass 2 mm thick,,.,,.yk, silver oak or equivalent planks 38 mm thick,,.,,.yk, size stone 20 x 20 x 25 cms,,.,,.yk, tmt bars fe 500,,.,,.yk, welder grade i,,.,,.yk, unit cost as per the specification,,.,,.yk, painter class i,,.,,.yk, stone chistler class ii,,.,,.yk, weld mesh 75 x 25 mm of 6g to 10g,,.,,.yk, rcc cap 1000 mm dia, 100 mm thick,,.,,.yk, anchor bolts 750mm,,.,,.yk, base platebase plate,,.,,.yk, gusset plates 6 mm thick,,.,,.yk, pvc pipe of cum140 mm,,.,,.yk