Latest terminal lugs Tenders | Government terminal lugs Tenders

Central Government/Public Sector

CTN :41323479

19 Aug, 2025 NA

Lucknow - Uttar Pradesh

Tender For supply of copper cable terminal for 3 mm sq. hole dia 6.2mm type 17a as per drg. clw/ es/ sk - 5/s-25/i confirming to spec.clw/es/s-25 alt. i [ warranty period: 30 months after the d ate of delivery ]

Central Government/Public Sector

CTN :41339370

19 Aug, 2025 NA

Bhavnagar - Gujarat

Tender For supply of high conductivity ring type copper crimping terminal ends, slim neck type pvc insulated. size-:6sq.mm ,6mm hole dia, od-12 mm. make- jaiso n, dowells, kamlesh, chetna, jaico, swastik, multi, and kmw make only. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :41323047

14 Aug, 2025 NA

Chennai - Tamil Nadu

Tender For supply of copper crimping socket for 35 sqmm copper tubular terminal to spec edts-200, rev-nil, am-2, corr-1,2,3 item no: 12 [ warranty period: 30 months after the date of delivery ]

State Government

CTN :41179812

11 Aug, 2025 7.60 Lacs

Raichur - Karnataka

Tender For corrigendum : procurement of cable jointing materials - cable gland dc 3cx95sqmm, cable gland 3cx95sqmm, cable gland 3cx240sqmm, terminal block-120mm2, terminal block-70mm2, terminal block-50mm2, terminal block-35mm2, end joint kit 11kv 3c 300sqmm, st joint kit 11kv 3c 300sqmm, end term kit 1cx120 sqmm, end term kit 4cx50 sqmm, copper ring cable lug 95 sqmm, lugs-6 mm2, 3d ring type, ring termin-non insula 300sq.mm, m20, al ring type lug 300sq.mm, m16, al ring type lug 240sq.mm,, m16, al ring type lug 25 sqmm, al lugs ring type 25 sqmm, al lugs ring type 10 sqmm, cu ring type lug rl-25-6, tubular lugs-95mm2(3d2712), snap on terminal lug (1.5-2.5), m10 al ring type lug 95sq mm, m12 al ring type lug 50sq mm , m10 al ring type lug 35sq mm, copper lug ring type 16sq mm, copper feruls 120sqmm(cb-53), copper lugs ring type 70sqmm, copper lug ring type 2.5 sq mm, end t kit 33kv 3c 120 sqmm, strght joint 33kv 3c 120 sqmm, cable gland 3cx300sqmm, end t kit 11kv 3c 400 sqmm, strgt joint 11kv 3c 400 sqmm , bimetal strip, mounting rail (c channel), kbtm5-15 stud type tb 65a 600v, st joint kit 3cx300 sqmm 3.3kv, st joint kit 1cx630 sqmm 11kv, end term kit 3cx300 sqmm 3.3kv, strght jnt 1.1kv 3.5c 95 sqmm, cu strght joint 3.5c 16 sqmm

CTN :41332875

16 Aug, 2025 4.00 Lacs

Kangra - Himachal Pradesh

Tender For supply of alternator genr 15 kva , bush bar genr 15 kva , starting relay 12 volt dc genr 15 kva , oil filter genr 15 kva , air filter complete assy genr 15 kva , fuel filter cloth and paper genr 15 kva , fuel pump single body double element type 02f20027 genr 15 kva , injector assy genr set 15 kva , fuel pipe genr 15 kva , hose pipe air cleaner genr set 15 kva , stopper solenoid genr set 15 kva , self starter genr set 15 kva , feed pump genr set 15 kva , bty lead positive and negative genr set 15 kva , fan belt genr set 15 kva , air filter genr set 15 kva , auto changer genr set 20 kva , evr genr set 20 kva , sleeve assy genr set 20 kva , oil filter genr set 20 kva , fuel filter genr set 20 kva , air cleaner element genr set 20 kva , injector assy genr set 20 kva , piston assy with ring genr set 20 kva , bty lead positive and negative genr set 20 kva , head gaskit genr set 20 kva , gaskit set genr set 20 kva , self starter genr set 20 kva , coupling plate genr set 20 kva , starting relay 12 volt dc genr set 20 kva , mounting pad genr set 20 kva , benzo bolt and washer genr set 15 kva , distilled water genr set 15 kva , armature for self starter 12v genr set 15 kva , pipe oil tank to pump genr set 15 kva , automatic voltage regulator genr set 15 kva , fuel filter genr set 15 kva , oil filter genr set 15 kva , fuel pipe line genr set 15 kva , bty connecting lead with terminal genr set 15 kva , benjo nut genr set 15 kva , silencer genr set 15 kva , head gasket genr set 15 kva , push rod genr set 15 kva , change over 63 amp 4 pole genr set 15 kva , flexible wire 40by76 90 mtr genr set 15 kva , mcb 10 amp genr set 15 kva , change over 63 amp genr set 15 kva , flood light 100w genr set 15 kva , radiator cooling fan genr set 15 kva , fan pully genr set 15 kva , water pump genr set 15 kva , fuel filter primary and secondary genr set 40 kva , fan belt genr set 40 kva , fuel pipe line genr set 40 kva , oil pressure pipe genr set 40 kva , oil filter genr set 40 kva , air cleaner assy complete with rubber joint genr set 40 kva , over flow pipe 17into13 genr set 40 kva , bty to bty connector lead with terminal genr set 40 kva , bty 12 volt 99by100 ah genr set 40 kva , change over switch 63 amp genr set 40 kva , engine oil genr set 40 kva , fuel filter genr set 40 kva , air cleaner genr set 40 kva , fuel pipe genr set 40 kva , fuel over flow pipe genr set 40 kva , oil pipe genr set 40 kva , copper washer 10 13 17 19 22 genr set 40 kva , inlet and exhaust manifold gm kit genr set 40 kva , self starter genr set 40 kva , clinder head assy genr set 40 kva , push tube upper and lower seal genr set 40 kva , push tube iron genr set 40 kva

CTN :41317627

12 Aug, 2025 NA

Imphal - Manipur

Tender For supply of y 15 amp 240v isi marked , switch piano 5 amp 240v isi marked , glazed ceramic coloured tiles of size 300mm x 300mm x 7-8mm thick , vitreous china pedestal pattern water closet european type ewc including pvc seat and cover , white cement , welding rod pkt of 100 electrodes , fuel filter 15 kva genr set kirlosker , oil filter 15 kva genr set kirlosker , air filter assembly 15 kva genr set kirlosker , fuel pipe 15 kva genr set kirlosker , oil pipe 15 kva genr set kirlosker , avr 15 kva genr set kirlosker , door lock key 15 kva genr set kirlosker , door glass for 15 kva genr set kirlosker , fuel filter 5 kva genr set kirlosker , oil filter 5 kva genr set kirlosker , air filter assembly 5 kva genr set kirlosker , fuel pipe 5 kva genr set kirlosker , oil pipe 5 kva genr set kirlosker , avr 5 kva genr set kirlosker , pedestal fan 400mm sweep , tripple layer hdpe water storage tank cylindrical vertical with closed top 1000ltrs capacity conforming to is specification , pvc sheathed unarmoured stranded copper conductor cable of size 1.5sqmm conforming to isi marked 90m roll , plywood commercial 18 y 19mm bwr 8 ft x 4 ft , hdpe jar 20 ltr , app water proofing membrane 3 mm thick 1m wide 10 m long , pvc insulated sheathed unarmoured cable 10sqmm twin core aluminium conductor isi marked with working voltage upto 1100 volt roll of 90 mtrs , battery terminal , mcb 63 amp dp 240 volts , starting and stoper relay , mcb 3 phase 63 amp 20 kva genr , self starter for genr set , led bulb 9w, 220-240 volt , synthetic enamel paint high gloss superiour quality og colour , synthetic enamel paint high gloss superiour quality red oxide paint , synthetic enamel paint high gloss superiour quality black colour , synthetic enamel paint high gloss superiour quality white colour , synthetic enamel paint high gloss superiour quality red colour , painting brush 75mm standard quality , switch piano 15 amp 240v isi marked , ceiling rose surface bakelite 65 x 50mm 2 to 3 terminals , plywood commercial bwr grade isi marked of size 8 ft x 4 ft x12mm thick , acrylic sheet 3mm thick for window panes 8 ft x 4 ft , cp stop cock 15mm bore , cp cast copper alloy pillar cock 15mm bore , m seal 100 gm , wall mounted fan 300mm sweep conforming to is , exhaust fan 300mm sweep conforming to is , mcb 10 amp sp with enclosure box mild steel , synthetic enamel paint high gloss superiour quality green colour , painting brush 100mm standard quality , pvc solid panel plain colour door and frame made of 5mm thick preformed pvc panel reinforced with mild steel square tube including aluminium mongery size 3 ft x 6 ft , hand drill machine , vitreous china wash hand basin of size 550mm x 400mm , mcb 20 amp sp 240 volts , bib cock fancy type 15 mm long nozzle cp brass , pvc flexible pipe 25mm dia , hand grinder machine , standard wooden ballies 3m long dia not less than 100mm on either end , pixel bulk head fitting in deep drawn anodized aluminium body epoxy powder coated and heat resistant prismatic glass cover with specially designed gasket with led lamp 1 x 5 watt , tullu pump 0.5 hp , mcb 32 amp dp 240 volts , mild steel door wire mesh weight not less than 2.20 kg per sqm , mild steel corrugated galvanised cgi sheet 6 ft x 3 ft 0.63 mm thick isi marked , batten holder bakelite angle type isi marked , synthetic enamel paint high gloss superiour quality white colour , synthetic enamel paint high gloss superiour quality black colour , synthetic enamel paint high gloss superiour quality greencolour , bricks sub class b old size best locally available minimum compressive strength 75 kg sqcm water absorption not more than 20 percentage , pendent holder //bid details 2 / 66 bakelite isi marked , mild steel corrugated galvanised cgi sheet 12 ft x 3 ft 0.63 mm thick isi marked , pvc flushing cistern of 10ltr capacity with flushing pipe and fittings complete , cp shower rose 75 mm dia with swivel arm 15mm bore square round shape , pvc swr tee 75 mm bore isi marked , pvc swr bend 75m

CTN :41042526

13 Aug, 2025 14.03 Lacs

Chhabra - Rajasthan

Tender For corrigendum : supply of lt miscellaneous items for lt switchgear lt system for the year 2024-25 unit 5 and 6 csctpp chhabra - air flow sensor sl0101, control supply -230v ac, with 1 no +1nc contact, make-ifm or equivalent, dynamic braking resistor 13 ohms/ 9600w, 10% ed, 10 sec. max, ambient 50 degree,make-iresco/equi or equivalent, fan: axial, dia: 250, 230vac, 50hz, 115w, air flow:1610 m3/h (specification attached at annexure-i), fan: axial, dia: 450, 415 vac, 50hz,480 w, air flow:4530 m3/h,speed-1360 rpm,(specification attached at annexure-ii), fan axial 08" ball bring 230v ac 1p-50hz (as per annexure-iii ), relay assly : 4 relay, 2 c/o, 5a/24v dc, with led indication, iron core reactor 3 phase, 0.359mh/45a, 3 ph iron core, 117 uh/240a, make: rishab/ transformer/epi/equi or equivalent, 3 ph iron core, 67 uh/240a, make:rishab/ transformer/epi/equi or equivalent, 3 phase line choke ,in-21 amp,inductance-4.2mh,class-f,freq-50hz,voltage-415v, 3 phase line choke ,in-21 amp,impedance-3%,class-f,freq-50hz,voltage-415v, ct: metering 250/5a, 15va, class 1, ct dim.: 180{w}, 100{d}, 70{h}, window size:20x35mm, front terminals, resin, cast, insulation class:e, type 2, colour:yellow, resin cast insulaed c.t 400/5a,class-1,va-10, resin cast insulaed c.t 400/1a,class-1,va-10, thermal overload relay range 95-120 a, 125hp three phase submersible pump star delta starter with 3-position selector switch (with auto switch), single phase preventer, current overload protection with short circuit protection., aluminium ring type terminal lugs conforming to is-8337/is-5082 ,iec-61238,for voltage rating 1.1 kv, 6 sq.mm, 10 sq.mm, 16 sq.mm, 25 sq.mm, 35 sq.mm, 50 sq.mm, 70 sq.mm, 95 sq.mm, 120 sq.mm, 150 sq.mm, 185 sq.mm, aluminium pin type terminal lugs conforming to is-8337/is-5082 ,iec-61238,for voltage rating 1.1 kv, 10 sq.mm, 16 sq.mm, 35 sq.mm, copper ring type terminal lugs conforming to is-8337/is-5082 ,iec-61238,for voltage rating 1.1 kv, 1.5 sq.mm, 2.5 sq.mm, 6 sq.mm, 10 sq.mm, 16 sq.mm, 25 sq.mm, power terminals mounting on din conforming iec 60947-7-1,voltage rating-1 kv,safe for fingers., current rating-140 a, 35 sq.mm,3 nm, current rating-192 a, 70 sq.mm,6 nm, current rating-232 a, 95 sq.mm,6 nm, copper pin type terminal lugs conforming to is-8337/is-5082 ,iec-61238,for voltage rating 1.1 kv, 1.5 sq.mm, 1.5 sq.mm(hollow type), 2.5 sq.mm, 2.5 sq.mm(hollow type), 6 sq.mm, 10 sq.mm, 16 sq.mm, 25 sq.mm, copper u type terminal lugs conforming to is-8337/is-5082 ,iec-61238,for voltage rating 1.1 kv, 1.5 sq.mm, 2.5 sq.mm, 6 sq.mm, terminals blocks (melamine housing) khaki color, 4 sq. mm, 32 amp., 600v, 10-20awg, screw type, din mounting, 6 sq. mm, 41 amp., 800v, 08-20awg, screw type, din mounting, 6-35 sq. mm, 125 amp., 750v, screw type, din mounting, 1.5-4sq. mm, 32 amp., 800v, 08-20awg, stud type, bolt connection, clip on din mounting, 35-50sq. mm, 125 amp., 1000v, clip on din mounting, wago make grey colour screwless , spring clamp, polyamide terminals for interpanel wiring , terminal:769-251, female plug:769-102 with add-on, modular timing relay,5a,2co,0.1s 100h,on-delay,230v ac, voltage-transducer, suitable for 24v dc power supply,i/p:0-500v ac,dual o/p(4-20ma), din rail mounted,, shunt resistor, 750a/60mv,0-60mv, shunt resistor, 175a/60mv,0-60mv, shunt resistor, 200a/60mv , 0-60mv, thermal overload relay,1.6a-2.5a, 3 pole, bi - metallic, 1 no + nc,, thermal overload relay,16a-25a, 3 pole, bi - metallic, 1 no + nc,, ac axial fan230 vac,50/60 hz 6"172x150x51 mm(model no rec-21725b2w) rexnord make or equivalent for 1:1 replacement, ac axial fan230 vac,50/60 hz 4"120x120x38 mm(model no rec-22038 a2t) rexnord make or equivalent for 1:1 replacement, transformer protection relay,i/p-4 nos of rtd sensors(pt-100),3 no of set points,0-300 temperature indication range,o/p-four relay contacts(01 c/o contacts),one analog 4-20 ma output contacts ,aux supply -90-270 v ac/dc,pecon make ,model no-tr-7570 or equivalent for 1:1 replacement, add-on auxilia

CTN :41338895

26 Aug, 2025 NA

Jamalpur - Bihar

Tender For supply of lead acid starter battery 450ah, (lm), 24v capacity suitable for starting diesel engine conforming to rdso specn. no. mp.0.24.00.65(rev.00) dec.2009. for 8 wheeler tower ca r . the cells shall be supplied in dry and uncharged condition. the overall dimension of eac h battery shall not exceed the dimensions mentioned in above rdso spec. each battery unit shall be supplied with flexible single core copper cable for inter unit connections with its associated lead coated terminal bolts, nuts and washers. the battery unit shall be supplie d with lead coated end cell connectors suitable for termination of 70 sq.mm e-beam copper cable at the rate of 2 nos. each for positive and negative terminals. note:1.item of type/mod el/make/brand from the manufacturer/supplier as approved by rdso shall only be considered. 2.the itemshall meet the requirement furnished by rdso in regard to vent plug and intercell/unit connectors in the letter no. el/6-7-2 dt: 24.01.2000 copied to all rdso app roved sources. 3.the loose items viz. floats,vent plug, intercell and endcell connectors s hall have manufacturers name. note- qty per set 01 set comprising of 03 nos of 08 volts 450 ah batt ery. [ warranty period: 30 months after the date of delivery ]

CTN :41323584

19 Aug, 2025 NA

Ranchi - Jharkhand

Tender For supply of outdoor type , plinth mounted, distribution transformer, minimum energy efficienc y level 3 of rating 500 kva, 3-phase, 11kv/415-240v,50hz, oil immersed, non-sealed type (transformer ta nk body and cover are bolted), copper wound, primary winding in delta and secondary winding in star (ve ctor symbol- dyn11), onan cooled transformer, conforming to is 1180 (part1):2014 with amendment nos. 1,2,3,4 or latest, and supplied with all standard fittings mentioned in clause 20.1 of is 1180 (part 1) latest with condition that drain-cum-sampling valve. oil temperature indicator & winding temperature indicators will be provided as per clause 20.2 f) of is 1180 (part 1). terminal arrangement: the transformers shall be fitted on high voltage and low voltage sides bushing appropriate voltage and current ratings., low voltage side cable end box required. the high voltage bushings (3 nos.) shall conform to is/iec 60137. the low volt age bushings (4 nos.) shall conform to is 7421. off-circuit tap changer (applicable for all ratings above 20 0 kva) for variation of hv voltage from +5% to -10% in steps of 2.5%. following has to be submitted by su pplier along with supply of material: (i) type test report of transformer having same rating, make (& mode l if any) and design from nabl accredited lab as per is: 1180 (part 1) latest. (ii) routine test certificates as per is: 1180 (part 1) latest. (iii) special test certificates as per clause 21.4 sl. no. (a), (c), (d) & (e) of is:11 80 (part 1) latest. supply of outdoor type , plinth mounted, distribution transformer, minimum energy effici ency level 3 of rating 500kva, 3-phase, 11kv/415-240v,50hz, oil immersed, non-sealed type (transformer tank body and cover are bolted), copper wound, primary winding in delta and secondary winding in star ( vector symbol- dyn11), onan cooled transformer, conforming to is 1180 (part1):2014 with amendment n os. 1,2,3,4 or latest, and supplied with all standard fittings mentioned in clause 20.1 of is 1180 (part 1) late st with condition that drain-cum-sampling valve. oil temperature indicator & winding temperature indicato rs will be provided as per clause 20.2 f) of is 1180 (part 1). terminal arrangement: the transformers shall be fitted on high voltage and low voltage sides bushing appropriate voltage and current ratings., low volta ge side cable end box required. the high voltage bushings (3 nos.) shall conform to is/iec 60137. the low voltage bushings (4 nos.) shall conform to is 7421. off-circuit tap changer (applicable for all ratings above 200 kva) for variation of hv voltagefrom +5% to -10% in steps of 2.5%. following has to be submitted by s upplier along with supply of material: (i) type test report of transformer having same rating, make (& mod el if any) and design from nablaccredited lab as per is: 1180 (part 1) latest. (ii) routine test certificates a s per is: 1180 (part 1) latest. (iii) special test certificates as per clause 21.4 sl. no. (a), (c), (d) & (e) of is:1 180 (part 1) latest. [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :41323101

22 Aug, 2025 NA

Bangalore - Karnataka

Tender For supply of 15amp switch cum socket combination with box of following specification.:-1)type:15 amp switch cum socket with junction box.(2)current carrying ca pacity:15/16/20 amps.(3)operating supply: single phase,230/240 volts,ac 50hz.(4)make:ssk,a nchor,cona,lisha,gm,havells,or equivalent.(5)current carrying material:copper brass.( 6)type of terminal:screw type terminal.(7)item consist of:15/16/20 switch,6/10amp socket & 15/16/20 amp socket(5 pin),indicator,wire/glass fuse.(8)warranty:minimum 1 year from t he date of supply.(9)supplier should submit authorized dealercertificate & bis license c ertificate along with offer &type test report from nabl accredited or equivalent lab a long with material.(10)is standard:is 3854 or 1293 or latest.(11)colour-white/off white/ (12)markings:shall have bis marking/isi marking [ warranty period: 12 months after the date of delivery ]

Terminal Lugs Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government And Public Sector