Latest terminal block Tenders | Government terminal block Tenders

Central Government/Public Sector

CTN :45616924

05 Aug, 2026 NA

Chittaranjan - West Bengal

Tender For corrigendum : supply of set of cable disconnection tm-1 to tm-6 (terminal block, tm-cables) specn: clw/es/3/0128/e [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

State Government

CTN :45720594

18 Jul, 2026 3.00 Lacs

Umaria - Madhya Pradesh

Tender For rate contract for electric item use for buildings for fy 2026-27 - pvc pipe 2 mm - isi mark, pvc pipe 1.50 mm - isi mark, junction box - isi mark, concealed box 1-inch - isi mark, pvc pipe 1-inch - isi mark, metal box 12-way - isi mark, metal box 8-way - isi mark, metal box 6-way - isi mark, metal box 3-way - isi mark, metal box 2-way - isi mark, mcb box (double door) 12-way - isi mark, wire 2.5 mm - isi mark, wire 1.5 mm - isi mark, wire 4 mm - isi mark, copper earth wire - isi mark, switch 6a - isi mark, socket 6a - isi mark, switch 16a - isi mark, socket 16a - isi mark, angle holder - isi mark, ceiling rose - isi mark, mcb 10a - isi mark, mcb 16a - isi mark, mcb 25a - isi mark, isolator 63a - isi mark, round plate - isi mark, canopy plate - isi mark, regulator (double step) - isi mark, bell switch - isi mark, bell - isi mark, plate 12-way - isi mark, plate 8-way - isi mark, plate 6-way - isi mark, plate 2-way - isi mark, plate 3-way - isi mark, nail 3-inch - isi mark, saddle 25 mm - isi mark, fan - isi mark, pvc tape (isi mark), earth plate 1 x 1 - isi mark, gi pipe 2 inches - isi mark, ac 1.50 ton - isi mark, coal, salt pellets, battery 12 volts 150 ah - isi mark (lead acid), battery 12 volts 120 ah - isi mark (lead acid), inverter 1 kva (isi mark), , inverter 2 kva (isi mark)

Central Government/Public Sector

CTN :45736160

09 Jul, 2026 NA

Prayagraj - Uttar Pradesh

Tender For supply of motor protection circuit breaker (mpcb) for water pump with auxiliary contact (1 no + 1nc)and terminal block db, current rating: 1-1.6 amp,thermal release range :1.0 to 1.6 a, voltage rating 690 v, class 10, breaking capacity: 50 ka, 3 pole as per rdso spec no: rdso/pe/spec/0192-2018 (rev.1) or latest. suitable for use in switch board cabinet of lhb type ac coaches. make: abb/schneider/siemens/l&t. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45715772

20 Jul, 2026 NA

Thane - Maharashtra

Tender For supply of discrete components for assembly of 15 mv linac boards - thick film resistors - sdm 1/4 watt 1 kohms 1% commercial use, analog comparators dual comparator, common mode chokes/ filters 3a 4.5mh 80m ohm horizontal choke, high-performance 30-watt, isolated dc/dc converter, multilayer ceramic capacitors mlcc-smd/smt 50v 1000pf 0603 c0g 5%, diodes- general purpose, power, switching switching diode bvr & it := 100 v, multilayer ceramic capacitors mlcc- smd/smt 1.0uf 50volts x7r 5%, thick film resistors - smd 1/4watt 510ohms 5% high power aec-q200, trimmer resistors -smd 100k 10% 1/4"squ smt multiturn, power management specialised - pmic rms-dc converter ic low cost-pwr, rectifiers diode, do-41 , 1000v, 1a, standard leds - through hole green diffused 12 volt, fmcd 1,5/12-st-3,5 24 position terminal block plug, female sockets 0.138" (3.50mm) 180° free hanging (in-line), pluggable terminal blocks 12 pos 2.5mm pitch plug 26-20awg spring, pluggable terminal blocks ifmc1,5/10-st-3,5-rf, pluggable terminal blocks imcv 1,5/10-g-3 5 rn p20 thr, pluggable terminal blocks 4 pos 2.5mm pitch plug 26-20awg spring, mcdn 1,5/12-g1-3,5 p14thr 24 position terminal block header, male pins, shrouded (4 side) 0.138" (3.50mm) vertical through hole, 24 position terminal block header, male pins, shrouded (4 side) 0.138" (3.50mm) vertical through hole, pluggable terminal blocks imcv 1,5/10-g-3 5 p20 thr, 12 position terminal block header, male pins, shrouded (4 side) 0.098" (2.50mm) vertical through hole, 4 position terminal block header, male pins, shrouded (4 side) 0.098" (2.50mm) vertical through hole, 9 pin d type connector, 15 pin d type connector, esd protection diodes / tvs diodes 3kw 24v 5% bi-directional, 10mh pulse transformer 1:1 through hole, 1000pf, tol 1%, 500v, 2 pin jst-ph-2.0 male-female connector set of 2 (2mm pitch) , metal film resistors - through hole 2watts 2.2kohms 5%, headers & wire housings minifit rtc hdr 12p dr v tin .062, centralab rv4 series potentiometer 5000000.0 ohms. 2 watts. 500 volts.rv4laysa505b panel mount, solder lugs terminals, ca509/k5wht – 5 mm wide marker blank (1 pkt = 100 tags), diodes - general purpose, power, switching 100v io/200ma bulk, omron 4pdt non-latching relay plug in, 24v dc coil, 5 a, allied connector, plc unit ethernet connectorrj45 female socket ethernet connector with plastic shell ip67, 3-phase power connector (4 pin), radiall tnc(insulated) square flange jack receptacle with solder pot contact

Central Government/Public Sector

CTN :45709067

18 Jul, 2026 45.00 Lacs

Roorkee - Uttarakhand

Tender For repair replacement of internal wiring incl sub main wiring, mcb dbs, bldgs security lights and connected items in pocket 1 to 8 under ge roorkee - taking down old unserviceable point wiring of any description including all fittings and fixtures like switches, sockets, ceiling rose, fan regulator, tubelight,, mirror light,, ceiling light etc complete all as specified and directed., m&l for point wiring with 1.5 sqmm frls-h insulated, unsheathed, multistranded, 1100 volts grade copper conductor cable single core conforming to is:694 along with one run of 1.5 sqmm frls-h insulated copper conductor cable green in colour for continuous earthing drawn through and including medium grade rigid pvc conduit conforming to is:9537 (pt-iii) and its all accessories / junction boxes / inspection covers etc of suitable size but not less than 20mm(od), concealed in wall/ floor etc including provision of earth dolly of suitable size concealed in wall and covered with 3 mm thick phenolic laminated hylam sheet fixed with brass gi screws/ modular cover plate as required for mounting switches, sockets, fan regulator, etc. / modular metal flush box covered with modular frame plate with cover of any size as per site requirement for mounting modular switches, modular sockets, modular fan regulator etc complete all as specified and directed for one light / ceiling fan / exhaust fan / call bell point controlled by one switch, all as per item no 2 here-in-before but one 6a socket point controlled by one switch on independent board, all as per item no 2 here-in-before but one 6a socket point controlled by one switch on same board, all as per item no 2 here-in-before but one 16a socket point controlled by one 16a switch on independent board with 2.5 sqmm wires., all as per item no 2 here-in-before but one wiring in existing conduit for one light / ceiling fan / exhaust fan / call bell point controlled by one switch., all as per item no 2 here-in-before but one one 6a socket point controlled by one switch on independent board, all as per item no 2 here-in-before but one one 6a socket point controlled by one switch on same board, all as per item no 2 here-in-before but one one light point controlled by two no. two way switch complete all as specified and directed, all as per item no. 2 here-in-before but one 16a socket point controlled by one 16a switch on independent board with 2.5 sqmm wires., m&l for sub main wiring along with earth wire with frls-h insulated copper conductor, single core cable drawn through and including medium grade rigid pvc conduit conforming to is:9537 (pt-iii) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 25mm concealed in wall/ floor etc including taking down existing unserviceable sub main wiring of any description complete all as specified and directed for 2runs x 4 sqmm(ph & n) + 1run x 4 sqmm(earth wire):- (note: three runs of copper cable and one run of pvc conduit shall be measured as one unit length), all as per item no 11 here-in-before but 2runs x 6 sqmm(ph & n) + 1run x 6 sqmm(earth wire), all as per item no 11 here-in-before but 2runs x 10 sqmm(ph & n) + 1run x 10 sqmm(earth wire), all as per item no 11 here-in-before but 4runs x 6 sqmm(ph & n) + 1run x 6 sqmm(earth wire), notes for item no. 2.00 to 14.00(i) quoted rate shall deemed to include the cost of cutting chases on wall/floor for concealed conduit wiring and making good with cement plaster, putty and paint to match with the existing surface.(ii) if any beam / column / rock wall is encountered while cutting chases, that particular portion may be provided with pvc casing & capping or surface conduit for drawing cables and surface pvc gang box fully enclosed type for mounting switches, sockets & regulators etc to avoid any damage to the structure. (iii) no cutting shall be done on ceiling for laying pvc conduit for ceiling fan point wiring. surface conduit or pvc casing capping may be

Central Government/Public Sector

CTN :45617135

02 Jul, 2026 NA

Haridwar - Uttarakhand

Tender For corrigendum : terminal block 32 amp, spec: tg60576 rev: 01, mate. code-hw7433499113

Central Government/Public Sector

CTN :45738157

10 Jul, 2026 NA

Vellore - Tamil Nadu

Tender For supply of de brg for nd160mb3r2 cg motor drive end and non-drive end bearings of each type , nde brg for nd160mb3r2 cg motor , cooling fan for nd160mb3r2 cg motor , motor terminal blocks assy nd160mb3r2 cg , de brg for ns132sb3r2 cg motor , nde brg for ns132sb3r2 cg motor , cooling fan for ns132sb3r2 cg motor , motor terminal blocks assy ns132sb3r2 cg , de brg for nd250mxb3r2 cg motor , nde brg for nd250mxb3r2 cg motor , cooling fan for nd250mxb3r2 cg motor , motor terminal blocks assy nd250mxb3r2 , de brg for ns112mb3r2 cg motor , nde brg for ns112mb3r2 cg motor , cooling fan for ns112mb3r2 cg motor , motor terminal blocks assy ns112mb3r2 cg , de brg for nd225m cg motor , nde brg for nd225m cg motor , cooling fan nd225m cg motor , motor terminal blocks assy nd225m

Central Government/Public Sector

CTN :45705805

09 Jul, 2026 NA

Multi City - Chhattisgarh

Tender For scope of work (sow) as mentioned in tender and schedule of work( 46 )items as given below ,[1] remvg 1hp,400v,3ph,50hz,1500rpm motor 4.000 ea,[2] remvg 3hp,400v,3ph,50hz,1500rpm motor 2.000 ea,[3] remvg 5hp,400v,3ph,50hz,1500rpm motor 4.000 ea,[4] remvg 7.5hp,400v,3ph,50hz,1500rpm motor 4.000 ea,[5] remvg 10hp,400v,3ph,50hz,1500rpm motor 2.000 ea,[6] remvg 15hp,400v,3ph,50hz,1500rpm motor 2.000 ea,[7] remvg 20hp,400v,3ph,50hz,1500rpm motor 2.000 ea,[8] remvg 30hp,400v,3ph,50hz,1500rpm motor 1.000 ea,[9] remvg 40hp,400v,3ph,50hz,1500rpm motor 2.000 ea,[10] remvg 60hp,400v,3ph,50hz,1500rpm motor 1.000 ea,[11] remvg 70hp,400v,3ph,50hz,1500rpm motor 1.000 ea,[12] remvg 1hp,400v motor,party to dispose 6.000 ea,[13] remvg 3hp,400v motor,party to dispose 2.000 ea,[14] remvg 5hp,400v motor,party to dispose 4.000 ea,[15] remvg 7.5hp,400v motor,party to dispose 4.000 ea,[16] remvg 10hp,400v motor,party to dispose 2.000 ea,[17] remvg 15hp,400v motor,party to dispose 3.000 ea,[18] remvg 20hp,400v motor,party to dispose 3.000 ea,[19] remvg 30hp,400v motor,party to dispose 1.000 ea,[20] remvg 40hp,400v motor,party to dispose 2.000 ea,[21] remvg 60hp,400v motor,party to dispose 2.000 ea,[22] remvg 70hp,400v motor,party to dispose 1.000 ea,[23] supply of motor bearing,1 hp motor 8.000 ea,[24] supply of motor bearing,3 hp motor 2.000 ea,[25] supply of motor bearing,5 hp motor 8.000 ea,[26] supply of motor bearing,7.5 hp motor 5.000 ea,[27] supply of motor bearing,10 hp motor 2.000 ea,[28] supply of motor bearing,15 hp motor 2.000 ea,[29] supply of motor bearing,20 hp motor 2.000 ea,[30] supply of motor bearing,30 hp motor 2.000 ea,[31] supply of motor bearing,40 hp motor 2.000 ea,[32] supply of motor bearing,60 hp motor 2.000 ea,[33] supply motor bearing,70hp/15hp vertical 3.000 ea,[34] supply&replcg of motor terminal block 15.000 ea,[35] testg nonwrking motor,various capacity 15.000 ea,[36] disconnect&remvg defective motor starter 15.000 ea,[37] reprg burnt/damaged motor stator lead 25.000 ea,[38] remvg faulty portion of motor main cable 16.000 ea,[39] layg of cable on wall/surface as per eic 95.000 m,[40] layg cable thr'rcc/hume/gi/open trench 45.000 m,[41] layg cable thr'excav underground trench 45.000 m,[42] disconnection of cable 6mm2 to 16mm2 10.000 set,[43] disconnection of cable 25mm2 to 70mm2 10.000 set,[44] cleang & paintg of motor 1hp5hp 16.000 ea,[45] cleang & paintg of motor 7.5hp20hp 10.000 ea,[46] cleang & paintg of motor 30hp70hp 6.000 ea

CTN :45716127

09 Jul, 2026 NA

Alwar - Rajasthan

Tender For tender for supply of outdoor full hd day and night ptz ip camera , camera mounting bracket heavy duty gi , camera junction box weatherproof , spike buster 4 port , camera pole gi 6 mtr with stair provision , pvc pipe heavy duty , pvc box 3x3 , led light 50w ip66 , solar panel , gi pole for light 6 mtr , pole foundation rcc , outdoor jb for light termination , ofc 6 fiber cable , ofc joint closure , ofc liu 12 port loaded , ofc patch cord lc-sc , network switch 8 port poe with sfp slot , sfp module pair , outdoor utp cable , power cable 2 core x 10 sqmm , nvr 32 channel ip , nvr 16 channel ip , nvr 08 channel ip , hdmi cable 10 mtr , surveillance hdd 10 tb , led tv 75 inch , wireless mouse , network rack 27 u , 24 port network switch sfp modules , installation system testing transportation

CTN :45732506

08 Jul, 2026 NA

Ambala - Haryana

Tender For supply of vacuum filter spares & service-spare parts of & work for 10 x 20 vacuum filter ,brass zig-zag 2 long ,s.s binding strip ,s.s. perforated screen ss 304 13 x 10 salem ss 304 (weight 1.72 kg.) ,heavy duty railway hose pipe size: 2 bore x 18 long ,s.s. bolt x ,scrapper belt 5 width 8 ply ,lead wire 3/8 ,s.s. decking plate 1 x 10 (ss 304) ,s.s. capillary pipe with s.s. junction box six way & main connecting pipe junction box to vacuum distribution valve (complete set) ,s.s. divisional strip ,copper rivet size below:- ,size: 4mm x 12 mm ,size: 5mm x 15 mm ,pvc spray nozzle ,m.s. connector (hexagonal) both & thread ,reconditioning work ,repairing charges of dismantling, refitting of damaged capillary, nipple, junction box 6 way along with column pipe upto vacuum distribution valve all work should complete in all respect both portion of 10 x 20 rotary vacuum filter, damaged decking plates replacement & fitting work to be completed, all ss perforated screen dismantling & refitting after cleaning of decking plates & damaged decking plate replacement. hydraulic testing to be done capillary section inside drum as well as drum to made leak proof, insure the trouble free working throughout the season 2026-27 damaged ss perforated screen replacement work in 2 nos. other filters (approx = 20 nos.)

Terminal Block Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors