Latest terminal box cover Tenders | Government terminal box cover Tenders

Central Government/Public Sector

CTN :45339300

08 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of micro controller based electronic speed indicator and recording with speed signal confirming to rdso spec. no ,mp -0-3700.07 rev -7 august -2017 range 0-120, voltage 24 v dc each set consisting of following items. 1) recording cum indicator unit 01 no(2).speed indicator -01 no.(3).pulse generator -01no(4).junction box -01 no.(5)connecting cable -01) set of 05 nos (recorder to indicator communication cable 25 mtrs. ) similar to laxven systems model no. lax-2000d8 for tower wagon. or similar make laxven systems, medha servo drive, autometers alliance ( rdso approved venders ) [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45326084

12 Jun, 2026 NA

Delhi - Delhi

Tender For auction sale of others - u/s scrap rubber, bellow, hose pipes, elastic ring, back plan, mcb only cover, terminal box cover, plastic canes, plastic bin, rubber gasket & fiber with & without any attachment etc.qty.-15.00mt. for stock holder sse/s/tkd. ss-11 no-sse/s/tkd/35/26-27/04 date 21.04.2026. ds-8 no. 015065 dt.21.04.2026. lot should be sold on as is where is basis. purchasers are requested to see the lot/site and approchable road before bidding. no claim will be entertained after sale of lot. the stock holder is responsible for any alteration, deletion & variation in the lot or in weighment or tempering with the lot will be solely responsibility of stock holder after joint inspection, if any found subsequently. bidders must submit the fixation of the delivery date through the ireps e-auction sale module at least 7 days prior to the delivery date. delivery will be given by actual weight on government approved dharam kanta only. material are lying in delhi (tkd) state.

Central Government/Public Sector

CTN :45339344

19 Jun, 2026 NA

Perambalur - Tamil Nadu

Tender For supply of terminal box cover for hitachi drg.no. 10s.813.539, alt-b [ warranty period: 30 months after the date of delivery ] ]

corporations/Associations/Others

CTN :45321766

15 Jun, 2026 45.73 Lacs

Paonta Sahib - Himachal Pradesh

Tender For procurement of electrical spares and consumables for 220 kv and 33kv switch yard at khodri power station - 245 kv lightening arrester, discharge current 10ka, frequency 50 hz,pressure relief class 40 ka(rms), long duration discharge class 3, m.c.o.v. 56 kv, make: oblum electrical industries pvt. ltd. /cg power and industrial solution ltd. or eq make as approved by engineer in charge., 145 kv lightening arrester outdoor type ,suitable for 145kv system voltage , discharge current 10ka, freq. 50 hz, high current impulse (4/10 s) 100 ka, rated lightning impulse withstand voltage 1.2/50 s - 650 kvp, polymer based (single phase) make-oblum electrical industries pvt. ltd. /cg power and industrial solution ltd,/ htachi / siemens india ltd or eq make as approved by engineer in charge., auxiliary switch (stack) 5no + 5nc, 220v, dc, make: crompton, hitachi or eq make as approved by engineer in charge for 220kv cgl make sf6 circuit breaker., surge monitor/surge counter with leakage current meter suitable for 220 kv lightening arrestor , make: cg power and industrial solution ltd./ oblum electrical industries pvt. ltd., 33kv ct indoor type , 3 core, 15va each, ratio 650-350/1 a + 1a , class 0.2s(2 core metering) & 5p10 (protection), str: 25ka for 3 sec. make siemens, crompton, hitachi or eq make as approved by engineer in charge., 33kv ct indoor type, 3 core, 15va each, ratio 300-150/1 a + 1a , class 0.2s( 2 core metering) & (5p10 protection, str: 25ka, for 3 sec. make siemens, crompton, hitachi or eq make as approved by engineer in charge, control motor, type c21, 2.6 a, 230v ac/dc, o/p 0.3kw, sr. no: 042-901, m/y 03/08, 750/ min. make: kpt shirol or eq make as approved by engineer in charge for 33kv cgl make indoor type sf6 circuit breaker., auxiliary switch 7no+6nc (stack), 250 volt dc, make: crompton, hitachi or eq make as approved by engineer in charge for 33kv cgl make indoor type sf6 circuit breaker., auxiliary switch 8no+ 8nc, 220v, dc, (motor drive ). make: abb/ hitachi or eq make as approved by engineer in charge for 245 kv, abb make isolator., 220 v, dc, close or trip-1 coil ( part no. exin - 400834 - r9)make: abb/hitachi or eq make as approved by engineer in charge for 145kv, abb make sf6 breaker., rectifier 15 a, 220 v, ac (part no. 1hyn-450040p1 ) make: abb/ hitachi or eq make as approved by engineer in chargefor 245kv, abb make isolator, mcb (2 pole,3a, 220v, dc ), over current earth fault relay, mc61a-nx, cat no : mc61anx2200, make: l&t electrical & automation, or eq make as approved by engineer in charge for 33kv sf6 braeker., 33kv busbar support insulator (epoxy) . make: universal engg. corporation,star electrical engg. works or eq make as approved by engineer in charge.(as per sample), epoxy bushing/ fixed contact of "r","y" &"b" phase bottom side for 33kv cgl make panel (as per sample), epoxy bushing/ fixed contact "r","y" &"b" phase top side for 33kv cgl make panel (as per sample), ratech wheel of 33kv sf6 breaker, cgl make, flexible contact of 33kv sf6 breaker finger, cgl make (as per sample), silica gel blue crystal in mesh size of 15 mm to 35 mm duly packed in poly lined moisture proof m s drums/carton, heat shrinkable cable terminal kit for 3- 400mm ,33 kv xlpe cable for outdoor application (make 3m/raychem/ densons)., heat shrinkable cable terminal kit for 3- 400mm ,33 kv xlpe cable for indoor application (make 3m/raychem/ densons)., heat shrinkable cable terminal kit for 3- 185 mm 33 kv xlpe cable for indoor application (make 3m/raychem/ densons)., heat shrinkable cable terminal kit for 3- , 185 mm 33 kv xlpe cable for outdoor application (make 3m/raychem/ densons)., p g clamp deer/panther for 220 kv conductor, p g tclamp deer/ zebra, for 220 kv conductor, p g clamp deer/ trantulla for 220 kv conductor, p g clamp tarantula/ trantulla for 220 kv conductor, p g clamp deer/deer for 220 kv conductor, p g clamp made of aluminum-alloy suitable for zebra to trantulla conductor with 4 nos bolt - n

Central Government/Public Sector

CTN :45332727

05 Jun, 2026 NA

Raigad - Maharashtra

Tender For tender for supply of power control card for 75kw danfoss make vfd, code no 13280306. 3 power card j7 for 75kw danfoss make vfd, code no 13280307 rfi auxiliary card j7 for 75kw danfoss make vfd, code no 13280308 3 igbt module with gate drive cable j7 for 75kw danfoss make vfd, code no 13280310 3 dc capacitor for 75kw danfoss make vfd, code no 13280312 fan 120 * 38 lp21 for frame size j7 for 75kw danfoss make vfd, code no 13280313 vlt control panel lcp 21 for 75kw danfoss make 3 vfd, code no 13280254 control cassette, profinet (new design) for 75kw danfoss make vfd, code no 13282183 3 danfoss 2.2kw vfd model: fc- 360h2k2t4e20h2bxcdxxsxxxxalbx, code no 134f3013 as per attached specification sheet. danfoss 4kw vfd model: fc- 360h4kot4e20h2bxcdxxsxxxxaxbx, code no 134f2977 as per attached specification sheet.

corporations/Associations/Others

CTN :45345968

06 Jun, 2026 NA

Sirmaur - Himachal Pradesh

Tender For supply of id fan vfd drive , raw mill circulating fan vfd drive , kiln main drive dc , coal mill circulating fan , raw mill ht motor 1600 hp cgl , vcb outdoor 33 kv , 4 mva transformer 33_11 kv , pulse jet bag house fan_ damper_compressor_bags selenide valve etc , all conveyer belts raw mill_ coal mill_packing plant and cement mill at rajban plant and crusher point at quarry , hot air fan vfd drive

CTN :44961942

03 Jun, 2026 65.76 Lacs

Jhalawar - Rajasthan

Tender For corrigendum : supply of spares for lnt make lt and ht switchgear, breakers and panel accessories of electrical circle and chp circle, csctpp, chhabra - racking handle for cn-cs 5000c, racking handle cn-cs 4000 h2, lockable trip push button type-aa, fixed arcing contact 800 s1, moving arcing contact 800s1, moving arcing contact, 5000c, hardware kit, spring charging, motor 220 v dc, spring charging limit, switch 220 v dc, closing coil 220 v dc, shunt release 220 v, dc, test position microswitch, service position microswitch, mdo to edo 800-, 2500c,3200h1(3p), mdo to edo 3200h1(4p), mdo to edo 5000c (4p), pole assembly 800c d/0, brekaer, door camlock-lhs, door camlock-rhs, racking handle, sic puller tq3 mat.-, delrin500, locking angle -tq3 m, tq3 earthing lip assembly, aux. busbar support, tq+tf2 v, aux.busbarterm assy, tf3,tq3-fr, aux.busbar support assy, tf3,tq3-fr, stainless steel door lock, td3,tf3-fr, bracket ,reset cord mn5 relay, ,tq3, xtension shaft, dropper support assembly, tq3 form iv, safety shutter tq3 d/o, safety shutter opener tq3, d/o, vcb spares 11 kv and 6.6, kv, big gear assembly, small gear -charging gear, assembly 12 kv vcb-25ka, subadha aux switch, (12no+12nc), tripping coil, closing coil, spring charging motor, vcb sds housing wo wire, pin locking channel, assembly, vaccum interrupter abb, vg6, drive rod assembly 800, a,1250a,2000a, vcb racking handle, spring charging handle, tripping rod, pin type channel racking, fixture 600 w, pin type channel racking, fixture 1000 w, breaker shutter assembly, 600 w, breaker shutter assembly, 1000 w, switron, switch,switron, 12no/12nc) aux., switch, rackin handel &, interlock, locking channel, assy 12kv 1250a 40ka, 1000w 3150a locking, channel assembly, limit switch, test/service,omron, make limit, switchmodel: x-, 10gm-b,contacts: 1, c/o, shutter roller, bracket 3150 a, roller for shutter, 3150a 40ka, pin for shutter, roller 3150a 40ka, 3150a breaker arm, contact - finger, contip finger f 2000a, vcb breaker, m4 flat washernylon(, 4.5 x 9, x 0.8mm), x 10-cozn pan head, m/c, screw, spring washer (zc), bottom conductor, arm, assy 12kv 3150a 40ka, top conductor arm, assembly 12kv 3150a, 40ka-abb, vi, 800a breaker arm, 800a vcb contact, finger assy new, flexible conductor, 12kv 800a, 40ka- abb vi, 2000a breaker arm, contip finger f 2000a, ø4 ss e-clips, ø6 ss e-clips, ø8 ss e-clips, ø10 ss e-clips 0.8mm, thk, circlip dia. 12mm, 1 mm, thick, 24 external type, circlip, wire circlip dia. 3.4+0/-, 0.4 ss, m3 x 25 spring pin, m3 x 30 spring pin, x 25 mm cotter pins, x 30 mm cotter pins, spring pin 6.5 dia x 40, long, split pin ø3x35, split pin ø1.8x20, connector type lug, for 800a,1250a,2000a &, 3150a), male connector - dnf, 14-250fim-m, female connector -, dnf 14-250fib-m, kv switchgear vcb, spares for type vk10l40h, rated voltage:12 kv, rated, normal current:800, a,rated s.c breaking, current : 40 ka & type, vk10q40h,rated, voltage:12 kv ,rated, normal current :3150, rated s.c. breaking, current : 40 ka, pds cable asm 12 kv, 800 a, short pds r phase asm 12, kv 800 a, short pds y phase asm 12, kv 800 a, short pds b phase asm 12, kv 800 a, breaker: type vk10l40h,, rated voltage:12kv, rated, normal current: 800a,, rated s.c. breaking, current: 40ka, line pt rack-in/out handle

CTN :45328819

09 Jun, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For equipment items - dual output regulated dc variable power supply-input voltage : 230v/50 hz ac.output voltage : (0-30)v dc.output current : (0-2)a.dcprotection circuit : over voltage, over current and short circuit protection.high efficiency : greater than 85 %.low ripple and noise less than 50 mv.digital display, digital ic trainer kit with breadboard:+5v dc, 1 a regulated power supply. 12v dc / 15v dc, 200 ma regulated power supply.solderless breadboard with minimum 840 tie- points, power distribution buses.zif(zero insertion force)ic sockets to accommodated 8 or 16 pin ics.logic input and output leds for output monitoring.16 buffered led outputs.16 debounced switch inputsvariable clock generator: 0.5 hz to 50 hz.single pulse output : 100 ms(buffered,positive and negative outputs).one seven-segment display with 4 bcd inputs.built-in logic switches.manual clock: debounced push-button(one pulse per press)., digital storage oscilloscope-bandwidth: 50-100 mhz. sampling rate: 1gs/sec.channels: 2 (minimum). power supply: 100v 240v ac, 50-60 hz automatic measurement: vpp, vavg,rms, frequency, period, vmax, vmin, rise time, fall time, + width, - width, +duty, - duty etc., horizontal scale: 5 ns/div 50 s/div or equivalent vertical resolution: 8 bits (2 channels simultaneously) vertical sensitivity: 1 mv/div 10 v/div (at input) waveform math: +, -, x , , invert, fft etc., waveform storage: 16 waveforms or equivalentcommunication interface: usb host, usb interface. c 7-inch color display or equivalent input impedance - 1 m 2%, // 20 pf accessories:2 xpassive probes (1x/10x), pcb prototype machine :manual software : copper cam & mach3 mill.resolution (x/y) : 3.125 micrometre.working area(x/y/z) : 200 x 300 x 120 mm.minimum width line and space : 0.1 mm (4 mil).maximum travel speed : 58 mm/sec(2.28 ).drilling range: 0.2 3.175 mm(8-125 mil).maximum drilling cycles : 50 cycles/minmain axle power rating : 300w.main axle rotating speed : 25000 rpm.maximum working speed : 3500 mm/min.feeding height: 120 mm.working drive : 0.02 0.05 mm.repositioning accuracy : 0.01 0.02 mm.supported formats : standard gerber, dxf, excellon.capability of processing various materials:fr4, copper clad, acrylic, metal, aluminium etc.power supply : 230v ac

CTN :45332966

11 Jun, 2026 NA

Rourkela - Odisha

Tender For supply of electrician screwdriver thin stem insulated handle , electrician screwdriver thin stem insulated handle , knife double bladed electrician , neon tester , blow lamp brass , crimping tool , wire cutter and stripper , copper bit soldering iron , de soldering gun , contactor and auxiliary contacts , limit switch , rotary switch , relay cut out relays reverse current relays over current relays under voltage relays , pin type shackle type egg type and suspension type insulators , hydrometer , portable electric drill machine , load bank lamp or heater type , laboratory type induction coil , out side micrometer , knife switch dpdt fitted with fuse terminals , knife switch tpdt fitted with fuse terminals , earth plate , earth electrode , mccb , elcb , rccb , fuses , rheostat sliding type , capacitors , various lamps , bus bar with brackets , rubber mat , electrician helmet , safety belt , ohm meter series type and shunt type portable box type , digital multi meter , a c voltmeter m i analog portable box type housed in bakelite case , milli voltmeter centre zero analog portable box type housed in bakelite case , ammeter mc analog, portable box type housed in bakelite case , ac ammeter mi analog portable box type housed in bakelite case , kilo wattmeter analog , digital wattmeter , a c energy meter , power factor meter digital , frequency meter , magnetic flux meter , lux meter , tachometer , tong tester or clamp meter , megger , 3 point d c starter , 4 point d c starter , wheat stone bridge with galvanometer and battery , single phase variable auto transformer , phase sequence indicator , growler , ac starters , oscilloscope dual trace , function generator , soldering iron , temperature controlled soldering iron , discrete component trainer , linear i c trainer , digital i c trainer , electric induction plate , electric kettle , electric iron , immersion heater , a c ceiling fan and ac table fan , geyser storage type , mixture and grinder , washing machine semi-automatic , motor pump set , inverter with battery , voltage stabilizer , dc power supply , battery charger , current transformer , potential transformer , solar panel with battery , ink jet or laser printer , dc compound motor with starter and switch , thyristor igbt controlled d.c. motor drive with tacho generator feedback arrangement , thyristor igbt controlled a.c. motor drive with , electrical machine trainer , used dc generators series shunt and compound type for overhauling practice , motorised bench grinder , manual motor coil winding machine , ceiling fan coil winding machine , primary current injection set , stepper motor with digital controller , shaded pole motor , smart meter , ev charger , ev charger home , portable double telescopic ladder , 3 ph variac , rotary hammer drill 1 ph , lcr meter

CTN :45348002

06 Jun, 2026 NA

Kanpur - Uttar Pradesh

Tender For supply of impulse generator ipg001 for efka make dc servo motor model no. dc 1550/ab 321 , efka make electronic motor model no. dc 1550/ab 321 complete with drive panel suitable for minerva m

Terminal Box Cover Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

corporations/Associations/Others