Latest terminal lugs Tenders | Government terminal lugs Tenders

CTN :41323584

19 Aug, 2025 NA

Ranchi - Jharkhand

Tender For supply of outdoor type , plinth mounted, distribution transformer, minimum energy efficienc y level 3 of rating 500 kva, 3-phase, 11kv/415-240v,50hz, oil immersed, non-sealed type (transformer ta nk body and cover are bolted), copper wound, primary winding in delta and secondary winding in star (ve ctor symbol- dyn11), onan cooled transformer, conforming to is 1180 (part1):2014 with amendment nos. 1,2,3,4 or latest, and supplied with all standard fittings mentioned in clause 20.1 of is 1180 (part 1) latest with condition that drain-cum-sampling valve. oil temperature indicator & winding temperature indicators will be provided as per clause 20.2 f) of is 1180 (part 1). terminal arrangement: the transformers shall be fitted on high voltage and low voltage sides bushing appropriate voltage and current ratings., low voltage side cable end box required. the high voltage bushings (3 nos.) shall conform to is/iec 60137. the low volt age bushings (4 nos.) shall conform to is 7421. off-circuit tap changer (applicable for all ratings above 20 0 kva) for variation of hv voltage from +5% to -10% in steps of 2.5%. following has to be submitted by su pplier along with supply of material: (i) type test report of transformer having same rating, make (& mode l if any) and design from nabl accredited lab as per is: 1180 (part 1) latest. (ii) routine test certificates as per is: 1180 (part 1) latest. (iii) special test certificates as per clause 21.4 sl. no. (a), (c), (d) & (e) of is:11 80 (part 1) latest. supply of outdoor type , plinth mounted, distribution transformer, minimum energy effici ency level 3 of rating 500kva, 3-phase, 11kv/415-240v,50hz, oil immersed, non-sealed type (transformer tank body and cover are bolted), copper wound, primary winding in delta and secondary winding in star ( vector symbol- dyn11), onan cooled transformer, conforming to is 1180 (part1):2014 with amendment n os. 1,2,3,4 or latest, and supplied with all standard fittings mentioned in clause 20.1 of is 1180 (part 1) late st with condition that drain-cum-sampling valve. oil temperature indicator & winding temperature indicato rs will be provided as per clause 20.2 f) of is 1180 (part 1). terminal arrangement: the transformers shall be fitted on high voltage and low voltage sides bushing appropriate voltage and current ratings., low volta ge side cable end box required. the high voltage bushings (3 nos.) shall conform to is/iec 60137. the low voltage bushings (4 nos.) shall conform to is 7421. off-circuit tap changer (applicable for all ratings above 200 kva) for variation of hv voltagefrom +5% to -10% in steps of 2.5%. following has to be submitted by s upplier along with supply of material: (i) type test report of transformer having same rating, make (& mod el if any) and design from nablaccredited lab as per is: 1180 (part 1) latest. (ii) routine test certificates a s per is: 1180 (part 1) latest. (iii) special test certificates as per clause 21.4 sl. no. (a), (c), (d) & (e) of is:1 180 (part 1) latest. [ warranty period: 30 months after the date of delivery ]

CTN :41316974

13 Aug, 2025 1.98 Lacs

Jaisalmer - Rajasthan

Tender For supply of chh1112005 hose st , chh2201004 hose , chso103110 101 hp , 116fb02038 pad , cho103125 101 hp , 116ad51246 endbt rh , 116ad51254 euobhlh , 1251p81035 techo how ma , 110eg81356 hornswite , 116eg91235 cable taho , cfs0132045 sorew , cfb0122085 bollt , ef50131640 bolt , ebr3023222 biup , 70204001100 tarminal , 72501160000 cable hm , 130011120 staner , 14080500004 cable assy , 14200200310 bushing

CTN :41186105

06 Aug, 2025 NA

Parganas - West Bengal

Tender For bid to ras bid to ras tender for supply of nut , plug , retainer , bolt , flat-head screw , spring , valve , exhaust , screw plug , ojde spanner 12x14 mm , spring , elbow , o ring , o ring , seal bearing , ojde spanner 19x22 mm , o ring , o-ring , liner , lower , gasket(fig-1510 by 05) , bolt , key , ring seal , clamp , pin dowel , lock , element filter , gasket , bearing needle , spanner , valve , adaptor , gasket , cable techo hour meter(fig-1045a) , element filter (ctlg fig-61) , strainer , ojde spanner 13x17 mm , spanner 10x11 mm (ojde open end) , spill tube , nut , seat , intake valve , insert , tihckness gauge allen key , 13 mm socket(sl no-g15313) , seat , exhaust valve , insert , seal , rod , spnr ojde 32x36mm , sensor oil pressure switch (fig-2010) , gasket , flange , clamp , clamp , plug , seat , set screw adjusting , hose , wrench hook(sl no-g15313) , gasket(fig no-3105) , fuse box cover , mc piping service kit , regulator & bush box assy , 22 mm socket(sl no-g15313) , o-ring , plate (fig-30) , lock , o ring (ms sl-120) , gauge , level , bolt , 27 mm socket(sl no-g15313) , seal , t handle 290mm , cap , pad rubber( fig no-5005 , sl no-13) , o-ring , seal , rectangular ring , o-ring , seal oil , lever , shaft , pto , bushing , aux diode(ctlg fig-10b) , metal ball(fig-4010 by 11) , lining brake , bushing , retainer , switch bty relay , cover , cyl .head (bd80 eng fig. no. 1150) , cover , body , adapter , tube , tube , wire harness , fuel pump , race inner 8b-5 by 150 , piston ring assy (containing 03 items) , race inner , scraper rh , hose(n743) , regulator (make lucas tvs)(ms) , gasket cyl head , lever , rod , cover , tube , injection no 1 , tube , injection no 2 , tube , injection no 3 , tube , injection no 4 , bearing ball , tube , element assy(fig-1410) , bit end rh (ctlg fig-7006) , tube , race inner , muffler , wire harness , front , shaft (os sl no-80) , plate main clutch (covered 04 plants) , puller 30 ton (ctlg sl-07) , hose , loose spring assy(fig 1015 , sl no-69) , operator seat assy , bracket , speedo meter (fig-12) , pulley , seat operators(ctlg fig-40) , bushing , gear driven 1st(fig-2125) , shaft intermediate , drive tachometer , bushing , gear driven reverse , seal ring assy , bracket lh , shaft , bushing , core assy , bonnet , arm , rocker assy , shifter clutch dog(price list sl-836) , bracket , bearing roller , oil pump assy , pressure spindle , oil cooler assy , fly wheel and rmg gear , starter motor assy self starter , power take off assy , flywheel assy(fig-2210) , frame lh (p-255)

CTN :40855749

06 Aug, 2025 NA

Lucknow - Uttar Pradesh

Tender For bid to ras repair of transformer 400 kva outdoor type at af stn memaura : : - disconnecting of hv or lv cable from transformer 400 kva 11or 0point433 kv at site and loading and unloading of transformer at both side s or s a of age i af memaura and repair work premises hiring of crane and transportation charges to workshop from agei af memaura complete all as specified and directedpoint make vishal transformers switchgears pvt ltd sm nopoint 1843089tr04 01 each job , taking down and dismantlingopening up unserviceable transformer step down outdoor type 110point433 kv capacity 400 kva including lifting of core taking out unserviceable burnt winding after dismantling core stampings and draining of transformer oil and storing in a suitable container desludging and cleaning thoroughly rewinding and reinsulating of transformer as per the requirement maintaining existing specificationsize including reassembling core stampings lowering wound core within transformer outer cell and refilling transformer oil after sludge removal of dielectric strength 50 kv at least replacement of silica gel of breather reassembling testing for satisfactory performance and installation and commissioning in the existing position complete all as directedpoint note materials required for winding and insulation shall be measured and paid separately as supply only 01 each job , m l for changing of old burnt copper coil by new dpc copper coils with complete including insulation material of distribution transformer of capacity 400 kva complete all as specified and directedpoint 107 kg , dismantling of unserviceable lt bushing of transformer of capacity 400 kva and supply and fix new bushing including brass stud nuts washers and rubber bush complete all as directed by the engineerinchargepoint 02 each set , dismantling of unserviceable 11 kv ht bushing of transformer of capacity 400 kva and supply fix new bushing including brass stud nuts washers and rubber bush complete all as directed by the engineerinchargepoint 01 each set , supply and pour new transformer oil in replacement of approved quality dielectric strength not less than 50 kv isi marked for filling in transformer for topping up complete all as specified and directedpoint 370 ltrs , schedule of credit for old us items will be the property of contractor

State Government

CTN :41311024

22 Aug, 2025 36.59 Lacs

Giridh - Jharkhand

Tender For supply of electrical line materials under adp head for f.y. 2025-26 under esa, giridih. - electrical items :, gi wire no. 8 for earthing, gi wire no. 7/16, gi wire no. 10 for earthing, pg clamp for 150 mm2 conductor, aluminium end terminal lugs 400 sq. mm, aluminium end terminal lugs 300 sq. mm, connector pipe to panther, connector panther to panther, connector panther to ab switch, connector pipe to ab switch, connector dog to ab switch, connector wolf to wolf, connector wolf to ab switch, rod type earthing [25 mm dia ms rod 3 mtr. long]

CTN :41275503

11 Aug, 2025 10.00 Lacs

Tinsukia - Assam

Tender For supply of mt head e e 0 oil seal front hub , oil seal rear shaft axle , gear lever bushing kit , self starter , accelerator pedal with sensor , deleted clutch assy , assy fuel filter , air filter , ac belt , relay 40a , bearing assy front , kit pad assy front , sensor wheel speed rear , sensor wheel speed front , assy clutch m cyl , assy parking brake cable , combination switch , wiper blade rear , wiper blade front

CTN :41242569

08 Aug, 2025 NA

Darjeeling - West Bengal

Tender For supply of bearing , bushing , air filter complete comp , air filter complete engine , air filter element , hose clip , service indicator , elbow , hose , hose clip cps 325 400 , hose cps 325 400 , coupling ring , hex bolt , coupling element , coupling hub , lock plate , washer , reducer , drain cock , fuel tank cap , strainer , breather , level gauge , copper washer , pressure screw , flex tube tank to lift pump , adapter fuel stop solenoid , fuel stop solenoid , engine oil pressure gauge , air pressure gauge , comp temp gauge , hour meter , key switch , slotted screw , copper tube , straight coupling , stop cable , temp gauge water , cable , comp temp switch , staight coupling , tee connection , adapter , nylon tube , blow down valve , silencer

CTN :41242645

08 Aug, 2025 NA

Darjeeling - West Bengal

Tender For supply of filter , hose , hose assy , dip stick , hex bolt , pre cleaner turbo iii , bolt , air cleaner assy , element air filter safety , element air filter primary , pipe , silencer , u bolt , nut , gasket , washer plane , cap , hydraulic filter , pipe suction , needle valve , elbow , hose nylon , piping dozer pump , pipe return , pipe oc outlet , coupling , rubber hose , clamp hose , battery cable , spring washer , plane washer , horn 24v , handle , lock lh , cover lock , screw , rubber , washer spring , washer , bolt socket , bushing , pin , seal dust

CTN :41242731

07 Aug, 2025 NA

Leh - Jammu And Kashmir

Tender For supply of 8 ton hydraulic jack with handle , bushing , jet puller assy , flap , oil cooler assy , repair kit msp 362 hand control valve , priming pump hand , rubber hose , rubber hose water pump to t connector , centre bolt , de spanner 516 38 bsf , tube extension 1-14 od x 10 bg thick 1 , assy fog lamp frontyellow lens lh , assy fog lamp frontyellow lens rh , assembly door lock rh , tommy bar with square drive head for ope , pole screw , de spanner 1516x34 bsf , handle axes pick head 2 kg , bulb turn signal 12v21w , wrench for lifting spare wheel assy , assy wiper blade , bulb head lamp 208v 60x40 , assy rear view mirror outside lh luma , assy rear view mirror outside rh luma , grease gun , tin rectangular 5 ltrs , de spanner 19x22 , tyre inflating hose with nipple 5.70m lo , philips head screw driver 100 mm long ti , eng screw driver 1.2x8x150 , first aid kit , tool bag for wheel wrench , warning lamp 4 4 low , tool bag , elementprimary , bolt steel m-24x1.5x80mm long lh , ring spanner 10 11 metric , inserter remover tube valve die , chisel 2810-0199 , screw driver 12 300mm , de spanner 18 19 , bucket water canvas 6 , tyre inflator hose , bulb , funnel oil 152mm , funnel fuel garrage pattern , allen key 12mm af , insp lamp with 10m cable comp w single , black out head lamp , triangle kit ) /bid number : gem/2025/b/6484037 * /dated: 28-07-2025 & & / bid document 1 / 49

Central Government/Public Sector

CTN :41251038

12 Aug, 2025 NA

Mangalore - Karnataka

Tender For spares for liebherr make ltm1250 5.1 and ltm1500 8.1cranes - magnet valve,511308008,ltm1250- presure, transmiter,691182008,ltm1250-5.1, pressure, gauge,750002408,ltm1250-5.1, brake valve,502992908,ltm1250-5.1, handbrake, valve,502650008,ltm1250-5.1, direconl cntl, vlve,502926208,ltm1250-5.1, high presure hose, ,470901908,ltm1250-5.1, prsure gage, cncton,470900808,ltm1250-5.1, btt programmed 96033233, ltm1250-5.1, fastening device 10153374, ltm1250-5.1, guide pulley compl 10149360, ltm1250-5.1, v-ripped belt,11482436,ltm1250-5.1, compressor,12111959,ltm1250-5.1, v-ripped belt,4981185,ltm1250-5.1, fastening device,7382029,ltm1250-, 5.1, tail lamp,607150608,ltm1250-5.1, tail lamp,607150708,ltm1250-5.1, hex nut din 985, m4,10875611,ltm1250-5.1, washer 4 200hv,10875645,ltm1250-, 5.1, pan-head screw,12216966,ltm1250-, 5.1, side marking, lamp,12103448,ltm1250-5.1, contact, support,12103450,ltm1250-5.1, modification, kit,96052477,ltm1250-5.1, blinking light,607149408,ltm1250-, 5.1, blinking light,607149508,ltm1250-, 5.1, light bulb, p21w,607021708,ltm1250-5.1, horn,614003108,ltm1250-5.1, wiring harness, w916,96002754,ltm1250-5.1, lead w912a,96005191,ltm1250-5.1, angle, transmitter,10802057,ltm1250-5.1, input/output, module,11213704,ltm1250-5.1, rotatnl spd sensr, cpl,12544505,liebherr, lead w942a,96039421,ltm1250-5.1, lead w942b,96037217,ltm1250-5.1, lead w943,96004366,ltm1250-5.1, lead w940,96004368,ltm1250-5.1, lead w944,96004373,ltm1250-5.1, lead w945,96004374,ltm1250-5.1, limit switch,spf,10678395,liebherr, lead w941v1,96004929,ltm1250-5.1, lead w941v1,966629908,ltm1250-, 5.1, coupling disc ,10873946,ltm1250-, 5.1, pressure sheet,10873945,ltm1250-, 5.1, hex screw,11652294,ltm1250-5.1, hex screw,10876580,ltm1250-5.1, distance, washer,970261408,ltm1250-5.1, cltch operting, mech,12100375,ltm1250-5.1, sealing ring,12103944,ltm1250-5.1, repair set lid,10877961,ltm1250-5.1, igniti start switch 10335557, ltm1250-5.1, lock cylinder,11007406,ltm1250-, 5.1, key ns 8901 ,11007434,ltm1250-5.1, electric pump,10327065,liebherr, support, railing,929562608,ltm1250-5.1, round steel,937456308,ltm1250-5.1, spring plug preas,, 963182408,ltm1250-5.1, keyboard unit,10296691,ltm1250-, 5.1, regulaton repar, kit,10872672,ltm1250-5.1, wiring harness, w31b,96010090,ltm1250-5.1, pressure, sensor,10813739,ltm1250-5.1, plate,97106670,ltm1250-5.1, clamp-half,602007408,ltm1250-5.1, socket head, screw,11820284,ltm1250-5.1, cage nut,413002708,ltm1250-5.1, socket head, screw,12219830,ltm1250-5.1, time realy 6301021608 ltm1500-8.1, relay 630105108 ltm1500-8.1, resistance module 10024857, ltm1500-8.1, time realy 12075176 ltm1500-8.1, time realy 630100708 ltm1500-8.1, central unit c2 10870677 ltm1500-, 8.1, power supply 10885768 ltm1500-, 8.1, plug-in card g0 921620399, ltm1500-8.1, lead 921211208 ltm1500-8.1, lead 921211308 ltm1500-8.1, lead 921211408 ltm1500-8.1, bus pcb 928431108 ltm1500-8.1, cable 10875778 ltm1500-8.1, radio communi 12110008 ltm1500-, 8.1, mech aux lighting 967126708, ltm1500-8.1, work light 10872003 ltm1500-8.1, lead 96002067 ltm1500-8.1, lead 966950408 ltm1500-8.1, lead 966950508 ltm1500-8.1, ammonia sensor 10144038, ltm1500-8.1, temp sensor 11349182 ltm1500-8.1, gas sensor 12984315 ltm1500-8.1, a/c compressor 12922849 ltm1500-, 8.1, level sensor 11088130 ltm1500-8.1, retaining spring 433105008, ltm1500-8.1, return strip 11001556 ltm1500-8.1, pipe clamp 10440952 ltm1500-8.1, fitting 774381508 ltm1500-8.1, fitting 774374208 ltm1500-8.1, hex nut 10875620 ltm1500-8.1, socket head screw 12207210, ltm1500-8.1, appliance socket 691809208, ltm1500-8.1, build-in socket 691810908 ltm1500-, 8.1, cable gland 602423208 ltm1500-8.1, cable lug 602217908 ltm1500-8.1, cable sleeve 10473048 ltm1500-8.1, cover 10286353 ltm1500-8.1, electr. cable 10870542 ltm1500-8.1, electr. cable 10870540 ltm1500-8.1, end angle 602794608 ltm1500-8.1, bushing support 604526508, ltm1500-8.1, sleeve contact 604519308 ltm1500-, 8.1, pin contact 604519208 ltm1500-8.1, stopper plug 60

Terminal Lugs Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector