Latest test lamp Tenders | Government test lamp Tenders

Corporations And Associations And Others

CTN :45523190

19 Jun, 2026 4.76 Lacs

Delhi - Delhi

Tender For provision of new led street lights with allied accessories on existing poles at various dark spots in saidulajab ward no 160 under south zone - led street light fixture, powder coated pressure die cast aluminium body (system lumen efficacy >135 lm/watt). supplying, installation, testing & commissioning of street light led fixture, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with driver efficiency >85%, input voltage: 140-270 volt ac, frequency 50/60 hz, operating temp range -5 0c to 50 0c, internal surge protection of 5 kv l,n,e as per iec 61000-4-5, driver efficiency >85%,thd 10% as per iec 61000-3-2, p. f. 0.95, ip-66,ik-10, cri >70, under voltage and over voltage protection, emi-emc as per cispr-15, lenses for beam angle as per iesna type i/ii/iii as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (led,driver & electrical circuitary) of minimum 50000 burning hours with 70% of initial lumen maintained till life ends as per lm80 extrapolation ies tm-21-11 report, cct 3000 k / 4000 k / 5700 k /6500 k (as per ansi bin), sdcm(standard deviation color matching)5, maximum power consumption should not more than the specified rating and fixture shallbe of relevant bis standard complete in all respect i/c external connections with 1.5 sq mm frls/hffr, pvc insulated copper conductorsingle core cable and earthing etc. as required withminimum 5 year oem warranty. system lumen efficacy >135 lm/watt output . lm79 & lm80 testreport and all testing required for led fixturesas per bis shall be submitted.. shape size and cct shall be as approved by engineer-in-charge asper requirement. (thermal management: heat sink of aluminium housing such that led junction temperature shall not rise above 90 c). 45 watt , supply and fixing of 32mm dia x 1 meter long g.i. pipe (medium class) bracket for mounting of fluorescent/hpmv/hpsv street light fitting on pole including bending the pipe to the required shape , 2 nos 25mm x 6mm flat iron clamps with nuts, bolts and washer , painting the flat iron with primer and finish paint etc. as reqd, supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required. 3 x 1.5 sq. mm, supply of xlpe insulated pvc sheathed al. conductor un-armoured cable 1.1kv grade conforming to is-7098 of following size:-2c*4 sqmm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required. upto 35 sq. mm

Corporations And Associations And Others

CTN :45523194

19 Jun, 2026 4.67 Lacs

Delhi - Delhi

Tender For provision of led light fittings with accessories at various locations in ward no. 167 khanpur, under south zone. - supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required. 3 x 1.5 sq. mm, supply and fixing of 32mm dia x 1 meter long g.i. pipe (medium class) bracket for mounting of fluorescent/hpmv/hpsv street light fitting on pole including bending the pipe to the required shape , 2 nos 25mm x 6mm flat iron clamps with nuts, bolts and washer , painting the flat iron with primer and finish paint etc. as reqd., supply of xlpe insulated pvc sheathed al. conductor un-armoured cable 1.1kv grade conforming to is-7098 of following size:-2c*4 sqmm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required. upto 35 sq. mm, led street light fixture, powder coated pressure die cast aluminum body (system lumen efficacy 135 lm/watt) supplying, installation, testing & commissioning of street light led fixture, powder coated pressure die cast aluminum body with built in or separate driver as per the requirement with driver efficiency >85%, input voltage: 140-270 volt ac, freq 50/60 hz, operating temp range -5 deg centigrade to 50 deg centigrade, internal surge protection of 5 kv l,n,e as per iec 61000-45, driver efficiency >85%,thd 10% as per iec 61000-3-2 , p. f. 0.95, ip66,ik-10, cri 70 , under voltage and over voltage protection,emi-emc as per cispr-15, lenses for beam angle as per iesna type i/ii/iii as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (led,driver & electrical circuitry) of minimum 50000 burning hours with 70% of initial lumen maintained till life ends as per lm80 extrapolation ies tm-21-11 report , cct 3000 k / 4000 k / 5700 k /6500 k (as per ansi bin) , sdcm(standard deviation color matching) 5, maximum power consumption should not more than the specified rating and fixture shall be of relevant bis standard complete in all respect i/c external connections with 1.5 sq mm frls/hffr, pvc insulated copper conductor single core cable and earthing etc. as required with minimum 5 year oem warranty. system lumen efficacy 135 lm/watt output . lm79 & lm80 test report and all testing required for led fixtures as per bis shall be submitted. shape size and cct shall be as approved by engineer-in-charge as per requirement. (thermal management: heat sink of aluminum housing such that led junction temperature shall not rise above 90 c). 45 watt

CTN :45501064

02 Jul, 2026 20.00 Lacs

Bikaner - Rajasthan

Tender For notice inviting limited tendernotice no: 01/elect./2026/ 706 date:- 10.06.2026tools & equipments of –electrician trade- heavy duty screwdriver insulated , electrician screwdriver thin stem insulated handle, , knife double bladed electrician, , chisel firmer with wooden handle, , grease gun, , (a) crimping tool, , wire cutter and stripper, , hacksaw frame, , tweezers, , drill hand brace, , plane cutters, , smoothing cutters, , file flat rough, , file flat bastard, , file rasp, half round, , the soldering gun, , contactor & auxiliary contacts (rm), , contactor & auxiliary contacts. (rm), , pin type, shackle type, egg type & suspension type insulators including hardware fitting, , portable electric drill machine, , load bank (lamp/heater type), , brake test arrangement with two spring balance rating, , laboratory type induction coil, , series test lamp (rm), , knife switch dpdt fitted with fuse terminals (rm), , knife switch tpdt fitted with fuse terminals (rm), , miniature circuit breaker (rm), , earth plate (rm), , earth electrode (rm), , elcb and rccb (rm), , fuses (rm), , rheostat (sliding type), , capacitors (rm), , various electronic components (rm), , various lamps (rm), , plug socket piano switch lamp, , holder (rm), , cables:, , twisted pair, , non-metallic sheathed cable, , underground feeder cable, , ribbon cable, , metallic sheathed cable multi-, , conductor cable coaxial cable, , direct-buried cable (rm), , rubber mat (rm), , electrician helmet, , rcc pole with accessories (ms angle iron, 'c' clamp, stay insulator etc.) and materials, , quipment, , ohm meter; series type & shunt type, portable box type, , digital multi meter, , a.c. voltmeter m.i. analog, portable box type housed in bakelite case, , milli voltmeter centre zero analog, portable box type housed in bakelite case, , ammeter mc analog, portable box type housed in bakelite case, , ac ammeter mi, analog, portable box type housed in bakelite case, , weight wattmeter analog, , (b) frequency meter (digital), , magnetic flux meter, , tachometer, , tong tester / clamp meter, , megger, , single phase variable auto transformer, , growler, , ac starters: :- -, , f. star delta starter soft starter, , g. auto transformer type, , oscilloscope dual trace, , function generator, , discrete component trainer, , linear i.c. trainer, , digital i.c. trainer, , domestic appliances -, , g. mixture & grinder, , h. washing machine semi-automatic, , i. motor pump set, , oil testing kit, , battery charger, , current transformer, , potential transformer, , 1 5 or 17 computer or latest version, , d.c. shunt generator with control panel, , motor-generator (ac to dc) with control panel, , d.c. compound generator with control panel including fitted rheostat, voltmeter, ammeter and breaker, , dc series motor coupled with spring balance load with control pannel, , dc shunt motor with control pannel, , dc shunt motor with control pannel, , dc compound motor with starter and switch with control pannel, , motor generator(dc to ac) set consisting of - shunt motor with starting compensator and switch directly coupled to ac generator with exciter and switch board mounted with regulator, breaker, ammeter, voltmeter frequency meter, knife blade switch and fuses etc. set complete with cast iron bed, , plate, fixing bolts, foundation bolts and flexible coupling., , ac squirrel cage motor with star delta starter and triple pole iron clad switch fuse with mechanical load., , ac phase-wound slip ring motor with starter switch, , universal motor with starter/switch, , synchronous motor with accessories like starter, excitation arrangements., , thyristor /igbt controlled d.c., , motor drive with tacho-generator feedback arrangement, , thyristor/igbt controlled a.c. motor drive with, , single phase transformer, core type, air cooled, , three phase transformer, shell type oil cooled with delta/ star, , electrical machine trainer -, , diesel generator set with changeover switch, ov

CTN :45449705

15 Jun, 2026 NA

Bathinda - Punjab

Tender For supply of boroscope camera with hod , torque wrench ratchet type light duty , pneumatic gun with socket set light duty , injector tester diesel vehicle , heavy duty screw driver set , impact screw driver set , filter clamp heavy duty , hydraulic fork stacker , glass cutter tool , magnet remover puller hero honda , magnet remover puller royal enfield , nose plier internal external , dc test lamp , socket set 4mm to 14 mm , 2 in 1 long screw driver , vernier caliper 300 mm , electronics grinding machine 150w

CTN :44799777

25 Jun, 2026 NA

Delhi - Delhi

Tender For corrigendum : procurement of spares for mi-17v5 helicopter - hydraulic tank, coarse filter, contrifugal fuel pump, electrick magnatic valve, wiinch "v", winch control panel pul300, counter meter, outer holder, nozzle guide vanes 3 with supports housing, nozzle guide vane i stage, 5053 gm co2 used in aerazur 610 life raft, check valve assembly, drain valve, bell crank set, punch r15mm, h/c mooring device, vibration supressor, external pod with two locks vtdg6, distressed beacon "v", megaohm meter, fire fighting system, optical quadrant, computation and generation module, communication unit, assembly frame, code device, protractors, transducer, speed inductive, free turbine, exhaust pipe, anti torque rotor, connection with filter, bearing, needle roller bearing, air cleaner, air filter, bevel gear support, gear box driven internal, adapter,gs, temperature control device cover, rotor shaft, rod, device, rod control, bomb rack store, solonoid valve, test lamp for upk-23-250, electric drive centrifugal pump, axle, piston, casing, rod, pressure relief valve, winch control panel, piston, testing cosole set

CTN :45159066

11 Jun, 2026 33.89 Lacs

Guna - Madhya Pradesh

Tender For supply of electrical materials for the repair and maintenance of street light as per the boq - details, t-5 power/energy saver 2x24w choke, t-5 power/energy saver 24w ftl tuberod, 2x24 t5-holder, t5 power saver 2x24 fixture acrylic transparent cover, t5 power saver 4x24 fixture acrylic transparent cover, 150w hpsv choke, 150w hpsv lamp, capacitor 33mfd 250vac 50 hz, electronic ignitor suitable for 150w hpsv lamps, 150w holder (porcelain), led driver 50w bis certified, led mcpcb plate 60w, led mcpcb plate 50w, led mcpcb plate 150w, supplyingof isi marked and approved make of moulded case circuit breaker(mccb) suitable for 3phase,3pole,50hz,415 volts, ac supply with respective interrupting capacity(ka) at 415 volts cited against their range standard conforming to is - 8828: 8.1mccb with breaking capacity 25 ka at 415 v: current rating -125 amps & 70% -100% adjustable, supply of sovp device should have single high capacity varistor in the l-n plug and encapsulated spark gap for n-pe, l-n sovp should have a rated voltage of minimum 320v ac to handle indian power supply conditions. sovp should have visual indication on replaceable varistor and spark gap modules as well as a potential free contact on the socket for remote indication. sovp device should be wired up as per tt configuration of wiring in accordance with en 61643-11 standards. both the l-n and n-pe, spds should be rated for handling 30ka of nominal 8/20 s surge current.: sovp for pole light sub feeder panels - type 2 pluggable spd 3+1, rating l-n/n-pe uc 255/320 v in 30/60ka ka, lmax 30ka/60 ka, up 1.5kv, supplying of isi marked and accepted standard of miniature circuit breaker(mcb)ofcseries suitable for 240/415volts,50cycle,10ka value ac supply confirming to is:8828:1996,iec:60898 :2002 but without enclosures: single pole 63 amp., astronomical timer with dst feature, contactor 3 pole 90 amp 50hz 415volts with no-nc contacts, tpn connector 150a, supply of approved make powder coated sheet steel encloser spn mcb db inclusive of busbar,neutral bar,earth bar & two earth terminals etc. complete as per is:13032 (exclusive of mcb & isolator): 8 way double door, supply of sovp device should have single high capacity varistor in the l-n plug and encapsulated spark gap for n-pe, l-n sovp should have a rated voltage of minimum 320v ac to handle indian power supply conditions. sovp should have visual indication on replaceable varistor and spark gap modules as well as a potential free contact on the socket for remote indication. sovp device should be wired up as per tt configuration of wiring in accordance with en 61643-11 standards. both the l-n and n-pe, spds should be rated for handling 30ka of nominal 8/20 s surge current.: sovp for pole light - type 2 pluggable spd 1+1, rating l-n/n- pe uc 230/400 v in 5 ka, imax 10 ka, up 1.2kv, led batten tubelight 20w, supplying of approved make tpn mcbdb metal double door with provision for fpmcb/isolator/rccb/rcbo as incomer and sp mcbs as outgoing inclusive of busbar,neutral bar,earth bar & two earth terminals etc. complete as per is:13032 (exclusive of mcb & isolator ): 8 way (8+24), 8 sq.mm multistrand pvc insulated copper wire bundle 90mtr, 1.sq.mm aluminium single core wire bundle of 100mtr. isi marked, xlpe insulated power cable( conforming is-7098 part-1) 1100 volt grade 2-core isi marked with alu. stranded/solid conductor: 16 sq.mm unarmoured, xlpe insulated power cable( conforming is-7098 part-1) 1100 volt grade 4-core isi marked with alu. stranded/solid conductor: 16 sq.mm unarmoured, xlpe insulated power cable( conforming is-7098 part-1) 1100 volt grade 1-core isi marked with alu. stranded/solid conductor: 25sq.mm unarmoured, wooden ladder 21ft, toolkit set consisting of different sizes l-keys, screw drivers, testers and plier set., taperoll box consisting of 30pcs (conforms to is: 7809 (part 3, sec 1),self extinguishing,protects from electrolytic corrosion,excellent water resistance,suitable for primary ins

corporations/Associations/Others

CTN :45246695

02 Jun, 2026 NA

Panaji - Goa

Tender For ghrssidc/e-t/2026-27/646 - electrical fabrication - a, la cross arm clamp for 7.5 mt rcc pole (gal v) - cee/e/523, sa cross arm clamp for 7.5 mt rcc pole (gal v) - gec/e/523, la cross arm clamp for 9 mt rcc pole (gal v) - gec/e/524, sa cross arm clamp for 9 mt rcc pole (gal v) - gec/e/524, la cross arm clamp for 105 lbs/yd rail pole (gal) - gec/e/723, sa cross arm clamp for 105 lbs/yd rail pole (gal) - gec/e/723, la cross arm clamp for 60 lbs/yd rail pole (gal) - cee/e/486, sa cross arm clamp for 60 lbs/yd rail pole (gal) - cee/e/486, la cross arm clamp for 90 lbs/yd rail pole (gal) - cee/e/515, sa cross arm clamp for 90 lbs/yd rail pole (gal) - cee/e/515, la stay clamp for 60 lbs/yd rail pole (gal) - cee/e/469, sa stay clamp for 60 lbs/yd rail pole (gal) - cee e 469, la stay clamp for 90 lbs/yd rail pole (gal) - cee/e/508, sa stay clamp for 90 lbs/yd rail pole (gal) - cee/e/508, la stay clamp for 7.5 mtrs rcc pole galvanised - cee e 523, sa stay clamp for 7.5 mtrs rcc pole galvanised - cee e 523, la stay clamp for 105 lbs/yd rail pole (gal) - cee e 723, sa stay clamp for 105 lbs/yd rail pole (gal) - cee e 723, la stay clamp for 9 mtrs rcc pole (gal v) - cee e 524, sa stay clamp for 9 mtrs rcc pole (gal v) - cee e 524, 11 kv v shaped cross arm (gal v) - cee e 408, 33 kv v shaped cross arm (gal v) - cee e 408, b type modified distribution box - cee e 386, a type street light meter box with clamps - cee e 386, stay set for 11 kv lt line - cee e 500, stay set for 33 kv line - cee e 500, turn buckle& eye bolt for 33 kv line - cee e 513, turn buckle& eye bolt for 11 kv line -cee e 466, cast iron packing piece 90 lb for rail pole - cee e 514, top insulators fitting for rcc pole - cee e 506, 4 pin angle type cross arm - cee e 702, 4 pin channel type cross arm - cee e703, 2 pin angle type cross arm - cee e704, 2 pin channel type cross arm - cee e 705, earthing pipe - cee e 467, sa cross arm clamp for ht/lt line on 11 mt rcc pole made of 50 x 10 flat (g) - cee e 711, la cross arm clamp for ht/lt line on 11 mt rcc pole made of 50 x 10 flat (g) - cee e 711, sa stay clamp for ht/lt line on 11 mt rcc pole made of 50 x 10 flat (g) - cee e 711, la stay clamp for ht/lt line on 11 mt rcc pole made of 50 x 10 flat (g) - cee e 711, sa bottom clamps for fixing street light fixtures for 7.5/9mtrs rcc pole galvanised 25 mm pipe - cee e 12, sa top bottom clamps for fixing street light fixtures for 7.5 mts rcc pole galvanised 25 mm pipe - cee e 12, la top clamps for fixing street light fixtures for 7.5/9 mts rcc pole (gal v) 40 mm pipe - cee e 612a, sa top clamps for fixing street light fixtures for 7.5 rcc pole - cee e 612a, gi nut and bolts in various sizes electro galvanised, gi pins for lt pin insulator, gi pins for 11kv pin insulator, gi pins for 33kv pin insulator, gi bent pipe of nominal base 25 mm, 1 mts long for tube light fixture - cee/e 618, gi bent pipe of nominal base 25 mm, 1.5 mts long for hpsv lamps - cee/e 593a, b type modified distribution box with mccb and kit kat fuses as per cees specifications / drawings, metal parts for shackle insulators as per cees specifications, gi bent pipe of nominal base bar 40mm x 3 mts long (medium class) the pipe shaft should conform to is : 1239 (part i) 1973 as amended upto date - ee/ii/21/2009, hot dip galvanised earthing strips of size 30x160x5mm, hot dip galvanised earthing strips of size 100 x 360 x 3mm, g.i bent pipe nominal bore 40 mm ce/e xi for hpsv lamps - cee/e 593a, metal parts for disc insulator as per department 4 bolted. as per department specification & drawing - 60/4/va/cee/tech/2019-20/1282, metal parts for disc insulator 3 bolted - 60/4/va/cee/tech/2019-20/1282, kit kat fuse 100 amps, kit kat fuse 200 amps, kit kat fuses 300 amps, kit kat fuse 400 amps, tinned copper fuse wire of various sizes, aluminium crimping lugs 25 sq.mm, aluminium crimping lugs 35 sq.mm, aluminium crimping lugs 50 sq.mm, aluminium crimping lugs 70 sq.mm, aluminium crimping lugs 95 sq.mm, aluminiu

Central Government And Public Sector

CTN :45034299

27 May, 2026 NA

Kaiga - Karnataka

Tender For corrigendum : supply of sfsb sfib under water fixtures d d - 1. under water lighting fixture -400w, 240v, 50 hz hpsv flood light , 2. lamp holder - spares for model no. sk 59 lighting fixture , 3. glass cover - spares for model no. sk 59 lighting fixture , 4. o ring - spares for model no. sk 59 lighting fixture , 5. protection cover - spares for model no. sk 59 lighting fixture , 6. cable leading tube - spares for model no. sk 59 lighting fixture , 7. gaskets - spares for model no. sk 59 lighting fixture , 8. ignitor super imposed for 1000w mh lamp. spares for superkino model no. sk 52-3 lighting fixture , 9. p.f. improvement capacitor - spares for model no. sk 52-3 lighting fixture , 10. under water lighting fixture, 1000w 240v, 50 hz hpmh all round circular flood light , 11. o ring - spares for model no. sk 52-3 , 12. protection cover- spares for model no. sk 52-3 , 13. ballast spare for model no. sk 52-3 mh lighting fixture , 14. 1000 watt metal halide lamp suitable for model no. sk 52-3 lighting fixture , 15. cable leading tube spare suitable for model no. sk 52-3 lighting fixture , 16. 400 watt ballast suitable for sk 59 lighting fixture , 17. ignitor suitable for sk 59 lighting fixture , 18. 400 watt hpmh lamp suitable for model no. sk 59 lighting fixture , 19. lamp holder - spares for model no. sk 52-3 lighting fixture

CTN :45099179

27 May, 2026 NA

Shahapura - Rajasthan

Tender For supply of thermometer digree , series test lamp , knife switch dpdt fuse terminals , knife switch tpdt fuse terminals , miniature circuit breaker mcb , earth plate copper , earth plate , earth electrode copper , mccb , elcb , rccb , fuse hrc type , fuse glass type , fuse rewire type , rheostat sliding type 0 to 25 2a , rheostat sliding type 0 to 300 2a , rheostat sliding type 0 to 1 10a , rheostat sliding type 0 to 10 5a , capacitor electrolytic type , capacitor ceramic type , capacitor polyester film type , capacitor variable type , capacitor dual run type , lamp halogen incandescent type , lamp fluorescent tube type , hp lamp mercury vapour , hp lamp sodium vapour , lp lamp sodium vapour , lamp led , plug socket piano switch lamp holder , cables , bus bar brackets , rubber mat thick , electrician helmet , rcc pole accessories lt line , safety belt , ohm meter series type , ohm meter shunt type , digital multimeter , voltmeter multirange , milli voltmeter centre zero , ammeter mc ma portable lab type , ammeter mc portable lab type 0 to 5 a , ammeter mc portable lab type 0 to 25 a , ammeter mi portable lab type 0 to 1 a , ammeter mi portable lab type 0 to 5 a , ammeter mi portable lab type 0 to 25 a , kw meter analog , digital wattmeter , energy meter single phase , energy meter three phase , three phase power factor meter digital , frequency meter , magnetic flux meter , lux meter , tachometer analog , digital tachometer photo sensor , tong tester clamp meter digital , megger , 3 point starter , 4 point starter , wheatstone bridge galvanometer battery , single phase variable auto transformer , phase sequence indicator , growler , resistance type starter , direct on line dol starter , star delta starter manual , star delta starter semi automatic , star delta starter fully automatic , soft starter 3 phase , auto transformer type starter , oscilloscope dual trace , function generator , soldering iron 25w , soldering iron 65w , soldering iron 120w , temperature controlled soldering iron , discrete component trainer , linear ic trainer , digital ic trainer , electric hot plate induction type , electric kettle , electric iron , immersion heater , ceiling and table fan , geyser storage type , mixer and grinder , washing machine , motor pump set 1 hp , oil testing kit , inverter input output battery , voltage stabilizer input output , power supply , battery charger , current transformer , potential transformer , solar panel battery , computer system , laser printer , manual motor coil winding machine step arbor , ceiling fan coil winding machine , primary current injection set , smart meter single phase , smart meter three phase , ev charger 3 phase , ev charger home single phase , working bench , wiring board projection , instructors table , instructors chair , metal rack , lockers drawers , almirah , black board white board , fire extinguisher , fire buckets , turnkey execution of electrician lab setup measuring steel tape- specification not available, combination plier insulated 200 mm- specification not available, screw driver 4150 mm diamond head- specification not available, screw driver insulated 6150 mm- specification not available, electrician screw driver - specification not available, heavy duty screw driver insulated- specification not available, electrician screw driver- specification not available, punch centre- specification not available, knife double bladed electrician - specification not available, neon tester 500 volt- specification not available, steel rule 300 mm (metric & english)- specification not available, hammer cross peen 250 gm- specification not available, hammer ball peen 500 //bid details 2 / 130 gm- specification not available, pincer 150 mm- specification not available, clamp 'c' 100 mm- specification not available, clamp 'c' 200 mm- specification not available, spanner 150 mm adjustable drop forged ss- specification not available, spanner 300 mm adjustable drop forged ss- specification not avail

CTN :45018875

15 May, 2026 107

Bengaluru - Karnataka

Tender For beedi deepa nirvahane - alugcable4cx35, aluminium cable 25 sq mm, fuse carrier 200a, high must 12.5 mtr, top 100mm and bottom 310 mm dia galavnized in single hotdip as per bsen iso 1461/astm a123, the mast shall be created on existing rcc footing,with 6nos 150w led flood light, high mast lighting 8meter tower with ladder and led flood lighting system, labour charges for highmast service including labour,crane ,transportation and other expenses, highmast timer, highmast light 9 meter full set with 150w flood light 6 nos, highmast light 9 meter full set with 150w flood light 4nos, highmast lights 9meter full set with 200w led flood light 4nos, high mast 12/12.5 mtrs, light fixing charge/gptpzp6, pipe clamp set/gptpzp6, meter box/gptpzp6, high mast light 10m height, alluminium 20sq cabel, led bulb 40w, led street light 50w, led street light 150w, led street light 100 wattage, led flood light 300w, led flood light 250w, led flood light 200w, led flood light 150w, copper cabel 10 sq mm, copper cabel 6 sq mm, copper cabel 1 sq mm, copper wire 16 sq mm, labour charges, tpn-63a, led serial lights, cable tie 12inch, cable tie 10inch, ceiling fan normal, electrical porcelain fuse-32a, led street light 120watt , led 60watt bulbs, led 50watt bulbs, led 30watt bulbs, led 20watt bulbs , cable tie 8inch, contractor with no protection 40a, aluminium cable 16sqmm, waterproof tape, single phase meter box, sodium light 100watt choke, flood light 150/200/250watt, led street light 200w, dp switch 63amp, dp switch 32amp, aluminium cable 6sqmm, aluminium cable 4sqmm, aluminium cable 2.5sqmm, aluminium cable 10sqmm, aluminium cable 2c6sqmm flat , bulb doom 50watt, three phase meter box, test lamp kit, ms fittings with clamps 1p5 inch, screwdriver set big size, enclosure box-mcb , mcb 2pole 32a, mcb single pole 32a, led street l 50w, led street l 150w, led street l 100w, led electronic open choke-150w, insulation tape w, auto on and off timer, change over 20amps, bed switch-b, high mast led bulb 200 watt (street light items), high mast led bulb 150 watt (street light items), high mast led bulb 100 watt (street light items), led bulb 50 watt (street light items), led bulb 32 watt (street light items), led bulb 25 watt (street light items), led bulb 23 watt (street light items), led bulb 20 watt (street light items), street light shade (street light items), led street light set 50 watt (street light items), led street light set 40 watt (street light items), led street light set 25 watt (street light items), street light bend pipe and clamp (street light items), tester (street light items), screw driver (street light items), cutting player (street light items), gang box 3 way (street light items), gang box 2 way (street light items), gang box 1 way (street light items), tp switch (street light items), dp switch (street light items), switch 16 amps (street light items), switch 6 amps (street light items), mcb 4 pole 63 amps (street light items), mcb 4 pole 32 amps (street light items), mcb 3 pole 63 amps (street light items), mcb 3 pole 32 amps (street light items), mcb 32 amps (street light items), mcb 25 amps (street light items), mcb 10 amps (street light items), mcb 6 amps (street light items), copper wire 4.0 sq mm (street light items), copper wire 2.5 sq mm (street light items), copper wire 2.0 sq mm (street light items), copper wire 1.5 sq mm (street light items), cg holder (street light items)

Test Lamp Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Corporations And Associations And Others

Corporations And Associations And Others

corporations/Associations/Others

Central Government And Public Sector