Latest tester sale Tenders | Government tester sale Tenders

Central Government/Public Sector

CTN :41055247

23 Jul, 2025 35.48 Lacs

Faizabad - Uttar Pradesh

Tender For tender for supply of street light at mvi airport ayodhya dham - supply of bakelite sheet with 1nos of 6a dp mcb and stud type connector suitable for 4cx 6sq mm cable complete as required. , supply of 25w led street light luminiare with pre die cast aluminium housing and ip 66 protection , pf greater than equal to 0.95 , thd less than 10 percent , cri greater than equal to 70 as per technical specification complete as required. , supply of lt power cable of 1.1 kv grade of following sizes aluminium conductor xlpe insulated pvc sheathed armoured cable confirming to is 7098 part-i-1988 with upto date ammendment as required. a) 3.5 c x 95 sq. mm , supply of lt power cable of 1.1 kv grade of following sizes copper conductor xlpe insulated pvc sheathed armoured cable confirming to is 7098 part-i-1988 with upto date ammendment as required. 4c x 6sq.mm(copper conductor) , supplying and laying of following size dwc hdpe pipe isi marked along with all accessories like socket , bend , couplers etc. conforming to is 14930 , part ii complete with fitting and cutting , jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. , complete as required. a) 63 mm dia (od-63 mm & id-50 mm nominal) , laying of one number pvc insulated and pvc sheathed/xlpe power cable of 1.1kv grade of following size in the existing rcc/gi/hume/metal/hdpe pipe etc. as required. a) above 35sq.mm and up to 95 sq mm , laying of one number pvc insulated and pvc sheathed/xlpe power cable of 1.1kv grade of following size in the existing rcc/gi/hume/metal/hdpe pipe etc. as required. b) up to 35 sq mm , supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required. a) 3.5c x 95 sq.mm , supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required. b) 4c x 6sq.mm(copper conductor) , itc of gi octagonal pole of following length in reinforced cement concrete 1 ratio 2 ratio 4 (1 cement 2 coarse sand 4 stone aggregate 40mm nominal size) foundation i/c excavation and refilling etc. complete as required a) 5 mtr. height , itc of 30w led street light luminiare on existing pole bracket i/c connection with 1.5sq.mm frls copper wire complete as required. , earthing with g.i. earth plate 600 mm x 600 mm x 6 mm thick including accessories , and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. , providing and fixing 25 mm x 5 mm g.i. strip in 40 mm dia g.i. pipe from earth electrode including connection with g.i. nut , bolt , spring , washer excavation and re-filling etc. as required. , earthing with g.i. earth pipe 4.5 metre long , 40 mm dia including accessories , and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. , providing and laying earth connections , from earth electrode with 6 swg dia , g.i wire in 15mm dia , g.i pipe from earth electrode including connection with g.i. thimble excavation and re-filling as required. , providing and fixing 6 swg g.i. wire on surface or in recess for loop earthing alongwith the existing cable as required. , design , fabrication , supply , installation , testing & commissioning of outdoor feeder pillar , cubicle type , made out of 2 mm thick crca sheet , totally enclosed , ip 55 , free standing , floor mounting , dust and vermin proof , indoor , compartmentalised , suitable for operation on 3 phase and neutral , 415 v , 50 hz ac system , including internal wiring with suitable size wires/cable , interconnection , duly powder coated painting etc. , including supply & insta

Central Government And Public Sector

CTN :41026707

30 Jul, 2025 NA

Imphal - Manipur

Tender For supply of supply of sitc of 2nos 30 kva and 2nos 20 kva rtu dg sets in manipur d d - 30kva 3phase 415v dg set with standard control panel and acoustic enclosure as per cpcb iv , itc of 30kva dg set with acceptance testing , supply of 20kva 3phase 415v dg set with standard control panel and acoustic enclosure as per cpcb iv , itc of 20kva dg set with acceptance testing , earthing with gi earth plate 600 mm x 600 mm x 6 mm thick , providing and fixing 25 mm x 5 mm gi strip in 40 mm dia gi pipe , providing and fixing 25 mm x 5 mm gi strip on surface or in recess , providing and laying in position reinforced cement concrete plinth for dg set , supplying of 3.5x25sqmm of pvc insulated and pvc sheathed xlpe steel armoured aluminum conductor ug power cable of 1.1kv grade , laying of one number pvc insulated and pvc sheathed xlpe power cable of 1.1 kv grade of size upto 35 sq. mm direct in ground , laying of one number pvc insulated and pvc sheathed xlpe power cable of 1.1 kv grade of size upto 35 sq. mm in the existing pipe , laying and fixing of one number pvc insulated and pvc sheathed xlpe power cable of 1.1 kv grade of size upto 35 sq mm clamped with 1mm thick saddle on wall surface , supplying and making end termination with brass compression gland and aluminium lugs for size 3.5x25 sq mm

CTN :41002970

29 Jul, 2025 NA

Nagpur - Maharashtra

Tender For procurement of geo technical equipments of rock testing - core drilling machine for rock sample preparation , installation, commissioning and training charges for core drilling machine for rock sample preparation , core cutting and grinding machine for rock sample preparation , installation, commissioning and training charges for core cutting and grinding machine for rock sample preparation , polishing and lapping machine for rock sample preparation , installation, commissioning and training charges for polishing and lapping machine for rock sample preparation , uniaxial compressive strength test - rock or concrete , installation, commissioning and training charges for uniaxial compressive strength test - rock or concrete , triaxial compressive strength - triaxial testing , installation, commissioning and training charges for triaxial compressive strength - triaxial testing , tensile strength - brazillian method semi-automatic , installation, commissioning and training charges for tensile strength - brazillian method semi-automatic , shear strength test machine - rock direct shear testing , installation, commissioning and training charges for shear strength test machine - rock direct shear testing , point load strength index tester - point load index , installation, commissioning and training charges for point load strength index tester - point load index , slake durability test apparatus - slake durability abrasion resistance-weathering test , installation, commissioning and training charges for slake durability test apparatus - slake durability abrasion resistance-weathering test , unconfined compression apparatus - compression testing , installation, commissioning and training charges for unconfined compression apparatus - compression testing , instruments for measuring specific gravity of rock sample - electric oven, electronic balance, desicator vacuum , installation, commissioning and training charges for instruments for measuring specific gravity of rock sample - electric oven, electronic balance, desicator vacuum

Central Government And Public Sector

CTN :40902932

18 Jul, 2025 NA

Kalpakkam - Tamil Nadu

Tender For corrigendum : supply of item no.1 erection,installation, commissioning and testing of 200kva air cooled dgs as per attached specification , item no.2 mobilization and demobilization of team and setting office set up at site , item no.3 grouting 75kg each , item no.4 supply and installation of 3200 x 400 x 40 ep , item no.5 supply and installation of 3200 x 325 x 40 ep , item no.6 supply and installation of 400 x 150 x 40 ep , item no.7 supply and installation of 250 x 150 x 40 ep , item no.8 supply and installation of anchor fastners hilti product no 339265 anchor hda-p m20x250 by 50, for concrete only hda-p m20x250 by 50

corporations/Associations/Others

CTN :41010610

30 Jul, 2025 30.77 Lacs

Delhi - Delhi

Tender For tender for supply of generator diesel with associated equipment : : - supply of dg set -100kva , 100kva dg set unloading from vehicle , supply of materials for provision of concrete foundation to support the weight of the 100kva dg set as per technical specification given in annexure-i , installation of concrete foundation to support the weight of the 100kva dg set as per technical specification given in annexure-i , installation of 100kva dg set on the foundation. , supply and termination of power cable on amf panel , 100kva dg sets and ac main distribution panel as per specifications in annexure-i , final testing & commissioning of 100kva dg set along with required mcb pannel , supplying and installing earthing material for three pits for 100kva dg set as per rdso specifications. , supply of dg set -250kva , 250kva dg set unloading from vehicle , supply of materials for provision of concrete foundation to support the weight of the 250kva dg set as per technical specification given in annexure-i , installation of concrete foundation to support the weight of the 250kva dg set as per technical specification given in annexure-i , installation of 250kva dg set on the foundation. , supply and termination of power cable on amf panel , 250kva dg sets and ac main distribution panel as per specifications in annexure-i , final testing & commissioning of 250kva dg set along with required mcb pannel , supplying and installing earthing material for three pits for 250kva dg set as per rdso specifications. , buyback cost of existing 200kva dg set kirloskar make at new delhi

CTN :41000055

15 Jul, 2025 46.41 Lacs

Chandrapur - Maharashtra

Tender For supplying and installation required machines and equipment for regional laboratory, nagpur and district laboratory chandrapur iind call - providing supplying. installation & commissioning at required site of compression testing machine with automatic pace rate controller, capacity 2000kn with flexure attachment 100 kn capacity (top loading type) with calibration certificate as per is : 14858 including running software as specified in specification as directed by engineer in-charge.(one year warranty including calibration, after complete warranty, amc will automatically start. for 4 year with yearly calibration certificate along with amc for required, two regular amc visit, (yearly) one emergency amc visit (yearly), a) supplying. installation & commissioning at regional laboratory, nagpur., b) supplying. installation & commissioning at district laboratory, chandrapur, providing supplying. installation & commissioning at required site of cement cube vibration machine with calibration certificate. as directed by engineer incharge .(one year warranty including calibration, after complete warranty, amc will automatically start. for 4 year with yearly calibration certificate along with amc for required, , two regular amc visit, (yearly) one emergency amc visit (yearly), a) supplying. installation & commissioning at regional laboratory, nagpur., providing supplying, installation & commissioning at required site of vibrating table for concrete cubes 1000mm x 1000mm. with calibration certificate. as directed by engineer incharge .(one year warranty including calibration, after complete warranty, amc will automatically start. for 4 year with yearly calibration certificate along with amc for required, , two regular amc visit, (yearly) one emergency amc visit (yearly), a) supplying. installation & commissioning at regional laboratory, nagpur., providing supplying, installation & commissioning at required site of concrete cutting machine as directed by engineer incharge .(one year warranty including calibration, after complete warranty, amc will automatically start. for 4 year with yearly calibration certificate along with amc for required, , two regular amc visit, (yearly) one emergency amc visit (yearly), a) supplying. installation & commissioning at regional laboratory, nagpur., providing supplying, installation & commissioning at required site of electromagnetic digital sieve shaker for 20cm, diameter as directed by engineer incharge .(one year warranty including calibration, after complete warranty, amc will automatically start. for 4 year with yearly calibration certificate along with amc for required, , two regular amc visit, (yearly) one emergency amc visit (yearly), a) supplying. installation & commissioning at regional laboratory, nagpur., providing supplying, installation & commissioning at required site of adopter for 300mm dia which can use in digital sieve shaker for 20cm, diameter (equipment number 5) as directed by engineer incharge .(one year warranty including calibration, after completewarranty, amc will automatically start. for 4 year with yearly calibration certificate along with amc for required, , two regular amc visit, (yearly) one emergency amc visit (yearly), a) supplying. installation & commissioning at regional laboratory, nagpur., providing supplying. installation & commissioning at required site of analog silver schmidt concrete test hammer. with calibration certificate. as directed by engineer incharge .(one year warranty including calibration, after complete warranty, amc will automatically start. for 4 year with yearly calibration certificate along with amc for required, two regular amc visit, (yearly) one emergency amc visit (yearly), a) supplying. installation & commissioning at regional laboratory, nagpur., providing supplying. installation & commissioning at required site of ring andball test apparatus (softening point electrically heated s

Central Government/Public Sector

CTN :40693663

19 Jul, 2025 NA

Noida - Uttar Pradesh

Tender For corrigendum : design, construction, supply installation, testing and commissioning of 8 nos floating concrete jetties in various national waterways schedulea

Central Government/Public Sector

CTN :40693678

19 Jul, 2025 NA

Noida - Uttar Pradesh

Tender For corrigendum : design, construction, supply installation, testing and commissioning of 8 nos floating concrete jetties in various national waterways schedule c

Central Government/Public Sector

CTN :40693681

19 Jul, 2025 NA

Noida - Uttar Pradesh

Tender For corrigendum : design, construction, supply installation, testing and commissioning of 8 nos floating concrete jetties in various national waterways schedule b

CTN :40936332

14 Jul, 2025 53.72 Lacs

Berhampur - Odisha

Tender For supplying all labour, material and t&p for laying of pipe lines, supplying & fiting of sluice valves, construction of valve chamber, providing fhtc in connection with pws to tumbagada, andanda & sapuakhata under patrapur block. - annexure - a, laying of pipe lines, fiting of sluice valves construction of valve chamber providing fhtc in connection with pws to tumbagada, supplying all labour and t&p for earth work in all kinds of soil within 50 m initial lead and 1.5 m initial lift including rough dressing and leveling etc., in foundation and plinth as per direction of engineer in-charge., supplying all material, labour , t&p for laying of following od hdpepipes conforming to is 4984-2016 and specials of the following outside diameter and class-4 to class-5 and jointing by fusion welding method including testing etc. all complete as per direction of engineer-in-charge, 160mm dia o.d. hdpe. pipe (including pipe cost) pe100, pn-06, 110mm dia o.d. hdpe. pipe (including pipe cost) pe100, pn-06, 90mm dia o.d. hdpe. pipe (including pipe cost) pe100, pn-06, supplying all labour, t&p for filling in pipe line trenches with excavated materials including watering etc., all complete including proper care to the laid pipe lines to prevent damages of pipes and specials as per the direction of engineer-in-charge., supplying all labour, materials, and t&p for drilling perfectly horizontal bore of required dia so as to accommodate following size hdpe. pipe line into the hole including inserting the pipe with out disrupting the traffic or cutting road including jointing with water main pipe lines etc, (excluding cost of pvc pipe) and as per the direction of engineer-in-charge, 160 mm dia hdpe pipe, supplying all labour and t&p for cutting cement concrete road for taking pipe line etc., complete and as per direction of engineer-in-charge., supplying all materials, labour t&p for making good to the damages of cutting of cement concrete road for taking pipe line and with 40 mm size crusher broken metal concrete etc., cc (1:4:8) of thickness 0.10 mtr and top 12 mm size crusher broken chip;s concrete cc(1:2:4) of thickness 0.075 mtrs including all cost, conveyance, royality of materials including watering, curing and ramming etc., all complete and as per specification and direction of engineer-in-charge, supplying all materials, labour and t&p for fixing of following sizes of c.i. sluice / non return valves with double flanged ends for water works purpose for following nominal diameter including cost of nuts and bolts, rubber insertion as per specification etc., complete., 150 mm dia c.i s.v, 150 mm dia c.i n.r.v, 100 mm dia c.i s.v, 80 mm dia c.i s.v, supplying all materials, labour and t&p for fixing of 15mm to 25 mm dia single air valve including fitting of required pvc service saddle for water works purpose for following diameter, including drilling the water main as per specification etc., complete., supplying all materials, labour, t&p for construction of brick masonry sluice valve and non return valve chambers of internal size 90x90x120cm with all lead royalty etc. such as earth work excavation, bed concrete with c.c. (1:4:8), kb brick in c.m. (1:6), 12mm cement plaster with c.m. (1:4), rcc cover slab with cc 1:2:4 etc., and as per approved p.h. drawing and design etc., complete and direction of engineer-in-charge., supplying all materials, labour and t&p for fabricating, fitting and fixing with specials at the required site using hot dip galvanized pipes of medium class and standard weight of reputed make (tata / zindal make) confirming to is 1239(p.1)2004/is:1161 of the following dia including cutting the pipes and flanges drilling the bolt holes matching the pipes flanges and jointing with proper gradient and alignment, welding with using electrodes, fitting, fixing using mobile diesel generator set etc., complete as per direction of engineer-in-charge to be used to cross drainage work incl

Tester Sale Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government And Public Sector

Central Government And Public Sector

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector