Latest tester scrap Tenders | Government tester scrap Tenders

Central Government/Public Sector

CTN :45298301

01 Jun, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For automatic star delta starter control panel for 10 hp submersible pump, fully automatic with digital ammeter and voltmeter, power supply suitability is three phase/415 v/ 50hz, thermal bimetallic relay for protection against overload or single phasing and severe unbalanced load, non compensate type capacity is 20 a, overload relay range 13.2 - 20 a, contactor rating current (a) is 20 a, overall dimension (lxwxh) is 175mm x 150mm x 90mm, material and thickness of ms sheet used is m.s sheet 1.6mm thick, color of paint finish is grey, auto manual switch position selection switch type is 3 position(auto-manual), availability of test report from central govt/nabl/ilac accredited lab to prove conformity to specification. similar to bch 10 hp starters control panel forsubmersible pump model: cpsdeynbl2. preferrable make: l&t, havells, subtech, siemens, bch and crompton. ]

Central Government/Public Sector

CTN :45292423

06 Jun, 2026 NA

Khorda - Odisha

Tender For tender for supply of supplying , installing , testing and commissioning approved make microprocessor based single (01) loop , networkable addressable fire alarm control panel , supplying , installing , testing and commissioning approved make digital audio amplifier. , supplying , installing , testing and commissioning approved make remote paging station for zone selection , supplying , installing , testing and commissioning approved make modbus interface gateway , the mimic annunciator for the fire alarm control panels (facp). , supplying , installing , testing and commissioning approved make addressable multi-criteria photo-thermal detector , supply , installation , testing and commissioning addressable self-test multi-criteria photo-thermal detector , supplying , installing , testing and commissioning approved make addressable manual call point , supplying , installing , testing and commissioning approved make addressable control module for sounders , supplying , installing , testing and commissioning approved make addressable relay module for ahu , access control , lifts , staircase pressurization , fire suppression & other third party outputs , supplying , installing , testing and commissioning approved make isolator module for isolating short / dewired / loose circuits with automatic resetting arrangement , supplying , installing , testing and commissioning approved make response indicator , supplying , installing , testing and commissioning of hooter cum strobe with in-built lithiumion battery , supplying , installing , testing and commissioning approved make 2w multi-tap wall mount speakers , supplying , installing , testing and commissioning of approved make auto dialer which supports gsm and pstn both , supply and laying of 2 c x 1.5 sq.mm. armoured cu multi-stranded twisted shielded frls copper cable , red in colour. , camc for 4 years after expiry of one year warranty of addressable fire detection system

State Government

CTN :45285975

28 May, 2026 1.21 Crore

Daman - Gujarat

Tender For providing and supplying modular furniture for newly constructed government school building at kachigam, nani daman. - civil works, providing supply and installation of corner sink table -size :-1100mm l x 1100mm d x 900mm hconstruction : floor based welded cabinet system having storage body should be flush face construction with intersection of vertical and horizontal members like lh and rh side panel along with front horizontal channel, back panel and bottom panel. it should be relocated anywhere easily as it is an independent unit. cabinet should of square non-sharp edge construction. doors should be assembled with ss-304 hinge assembly. removable back panel should be provided to easily access the service lines running behind the cabinet benches. intermediate horizontal channels should be provided between door and drawer. toe-space of 90mm x 90mm is provided at front-bottom side of cabinet. levelers are provided for easy leveling of welded cabinet. shelf should be eight-bend panel with 20mm height. drawer tray should be of single piece construction. drawer should be well supported on lh and rh ball slide suspension system. steel door and drawer front should be of double wall construction with sound dampening material filled inside. doors should be easily removable and hinges should be easily replaceable. knee space panel should be in 22 gauge , cabinets are tested as per sefa 8m standard from a sefa approved lab and also tested as per en 14727 from a third party testing agency having nabl accreditation. dimensions : w= 900 mm, d = 900 mm, h = 875 mm configurations: 1 shutter - 1 nos moc: mscrca: is 513 (1994) thickness: lh/rh side panels, shutter front, bottom panel, top front, drawer separator, shelf, alignment channel is of 1.2mm thk. removable back panel, shutter cover, fr. rack strip, top cover panel is of 0.8mmthk. finish: powder coating pure epoxy, thickness 40-50 microns , followed with 9 tank pre treatment process the thickness of powder coat should be 45-50 microns, which passes the test of salt spray for 1000 hours. it should have a high temperature withstanding capacity with excellent electrical insulation properties.the rear portion of above accessories which is in contact with live metal should be made from thermo set material which will not melt on heating.handle : anodized aluminum recessed-type, ctc: 160.0mm lock: units have a locking facility with 180 and 10 lever cam lock mechanism (except for sink and corner unit) hinge: ss hinge screw: ss 304.shutter : should be of twin-type construction with sound dampening effect using profill.shutter cover should be equipped with bump on for sound dampening. base moulding should be made of pvc with corner clips. ball slide: 500mm length shutter should have provision of roller catch.pp sink,polypropylene molded sinks: made up of 5 mm thick high density and elastic poly propylene with good resistance to organic solvents. sink - bowl size to be a minimum of (l x w x d) 560 x 355 x 300 mm.faucet - 3-way type faucet as per approved makeworktop : jet black granite: it should be 19mm (+/- 2mm) thick jet black granite worktop. the exposed edges of the worktop should be chamfered and smoothened. the bottom of the worktop should be polished and there should be a v-groove throughout the length of the exposed edges to protect the cabinets from coming in contact with the spillages. the overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. the backing material used is a neoprene mat of 6 mm thickness. (make as per selection of architect or selection of higher authority), providing supply and installation of corner table - size 1100mm l x 1100mm d x 900mm hconstruction: floor based welded cabinet system having storage body should be flush face construction with intersection of vertical and horizontal members like lh and rh side panel along with front horizontal channel, back panel and bottom panel. it should be relocated anywhere easily as it is an indepe

CTN :45303951

04 Jun, 2026 9.00 Lacs

Cuddalore - Tamil Nadu

Tender For supply of equipments - equipments, dc series motor with electrical workbench, dc distribution panel, dc shunt motor coupled with three phase alternator with electrical workbench with 3point starter, single phase induction motor with electrical workbench, three phase synchronous motor with electrical workbench, open cup apparatus, closed cup apparatus, four stroke petrol engine cut section model, two stoke petrol engine cut section model, diesel engine test rig, multi cylinder petrol engine, air compressor test rig, exhaust gas analyzer

CTN :45112405

29 May, 2026 23

Multi City - Karnataka

Tender For corrigendum : supply of variuos equipments - agpclamp set cup, agpgi collar 2 inches, agpgi pipes 2 inches, pump set 25 hp 50 stage, pump set 20 hp 40 stage, pump set 17.5 hp 30 stage, pump set 15 hp 30 stage, splaung, agp auto switch, agp 300 v fuse, agp preventer, pump set 7.5 hp 45 stage, test bearing set 17.5 hp, agp test bearing set 20 hp, agp test bearing set 25 hp, agp 25 hp motor panel bord, agp 20 hp motor panel bord, agp 17.5 hp motor panel bord, agp 6 sq mm cable, agp 4 sq mm cable, agp7.5 hp motor panel bord, agpbends with mrv 2 inches, pump set v4 2 hp 20 stage

CTN :44995734

25 May, 2026 NA

Bareli - Madhya Pradesh

Tender For supply and apply of epoxy based elastified top coat (2 components) shaderal-7012 for painting of underframe of coaches as per drg.no. mdts-094 revision 01 with amendment slip no.1 of nov'2008. test panel for accelerated test be prepared by applying two coats of this paint, packing instruction pi042 [ warranty period: 30 months after the date of delivery ]

CTN :45278859

29 May, 2026 25.00 Lacs

Jodhpur - Rajasthan

Tender For single source procurement for consumable for gel tech - id-titration rack , id-titration solution , anti-d reference reagent , id-diacell abo a1, a2, b, o , id-diascreen i-ii-iii-iv-vp-vip , id-diacell abo a1, b , id-diacell i-|| , id-dia panel , id-diapanel-p , id-diacell -- , id-diacell ip-iip-iiip , id-diascreen i-ii-iii-iv , id-diacell i-ii-iii asia , id-internal quality control , id-diacell abo a1, b, o , id-antigen profile iii (id-testsera anti-m, -n,-s,-s,-fya, -fyb (6x5,0ml)) , diacidel , id-diascreen prophylax , id-diapanel plus 6 , id-partial rhd typing set , diaclon abo/rh for patients , diaclon abd-confirmation for patients , diaclon abo/rh for newborns dvi- , diaclon abo/d + reverse grouping , diaclon rh-subgroups + k , anti-a1 absorbed , diaclon anti-h , diaclon anti-k , diaclon anti-m , diaclon anti-n , diacion anti-lea , diacion anti-leb , anti-k , diaclon anti- jka , diaclon anti-jkb , anti-father , anti-kp b , anti-lua , anti-lub , id-card s , id-card s , id-card fya , id-card fyb , id-antigen profile i , id-antigen profile ii , id-antigen profile iii , diaclon abo/d , diaclon abo/d + dat , nacl, enzyme test and cold agglutinins , liss/coombs , coombs anti-igg , dc-screening ii , diaclon complete crossmatch , dc-screening i , dat igg-dilution , dat igg1/igg3 , diacion abo/rh for newborns dvi+ , diaclone abo/rh for donors , diaclon abd-confirmation for donors , diaclon abo/d + reverse grouping for donors , diaclon anti-p , id-cellwash-p , id-cellstab , id-diluent 1 , id-diluent 2 , wash solution a concentrate , wash solution b concentrate , wash solution a , wash solution b , id-dia (diego) positive , id-diacell abo a2 , id-diacell abo o , id-diacell pool , id-i negative cell , id-papain , ih-qc1 , ih-qc2 , ih-qc3 , ih-qc4 , ih-qc5 , ih-qc6 , ih-qc7 , ih-qc8 , id-anti-s , id-anti-s , id-anti-fya , id-anti-fyb , id-diaclon anti-d , id-centrifuge l , head 24 id-cards , head 28 tubes , head 12 tubes , head 2 racks , id-incubator l , ih-com kit full version , ih-com kit for reader , id-pipetor fp-6 , ih1000 , ih-500 , swing twinsampler ii , saxo id-reader ii , diacent-cw (12 mm) , banjo id-reader , id-working table kit , id-dispenser green , ih-abid fullversion , id-microtips , id-microtips refill racks , id-microtips box , microcide sq , with 90 , id liss coombs , id diluent - 2 , forward & reverse grouping card , new born abo/rh+ dat , id diacell i-1- , id dia panel (set of 11)

CTN :45201075

30 May, 2026 NA

Dindori - Madhya Pradesh

Tender For supply of jalpraday samagri item - pvc pipe 3-inch, pvc socket 3-inch, pvc elbow 3-inch, pvc tee 3-inch, pvc solvent, pvc socket 6-inch, pvc elbow 6-inch, pvc tee 6-inch, rubber 6-inch, leather sheet, gi pipe 2-inch, gi long socket 2-inch, gi nipple 2-inch (0.5 ft), gi nipple 2-inch (1 ft), gi nipple 2-inch (1.5 ft), gi nipple 2-inch (2 ft), gi nipple 2-inch (2.5 ft), gi nipple 2-inch (3 ft), large hacksaw frame, saw blade, ci reflux valve 2-inch, ci valve 3-inch, plastic tank valve 3-inch, tailpiece 3-inch, flange 2-inch, tailpiece 4-inch, tailpiece 6-inch, flange 3-inch, flange 6-inch, hose 3-inch, hose 4-inch, hose 6-inch, nylon rope (12/8), spindle rod 3-inch, spindle rod 4-inch, spindle rod 6-inch, union 3-inch, flange washer 2-inch, flange washer 3-inch, flange washer 4-inch, raw rubber, tape, gi elbow 2-inch, starter (spt) 5 hp, starter (spt) 12.5 hp, panel (spt) 2 hp, 5 hp. 3-core submersible cable (6mm), hdpe coupler, 7.5 hp submersible motor, 7.5 hp submersible motor, 7.5 hp auto-switch, 7.5 hp auto-switch, grips (63, 100, 200, 500 amperes), fuse wire, reducer (2" to 3"), reducer (3" to 4"), union (2-inch), union (3-inch), union (4-inch), drilling machine, grinding machine, pvc pipe (1/2-inch), pvc pipe (3/4-inch), socket (1/2-inch), elbow (1/2-inch), tee (1/2-inch), brass elbow (1/2-inch), brass tee (1/2-inch), cap (1/2-inch), socket (3/4-inch), elbow (3/4-inch), tee (3/4-inch), brass elbow (3/4-inch), brass tee (3/4-inch), cap (3/4-inch), tap (3/4-inch), chain wrench (no. 18), chain wrench (no. 12), chain wrench (no. 24), ring spanner (21-23), ring spanner (18-19), ring spanner (16-17), open-end spanner (21-23), open-end spanner (18-19), open-end spanner (16-17), taparia pliers, large screwdriver, small screwdriver, ammeter, voltmeter, shovel, mortar pan, pickaxe, crowbar, beso, breaker, grinder blade, raincoat, nut & bolt (no. 21, 6-inch), nut & bolt (no. 18, 2-inch), nut & bolt (no. 17). 1/2-inch flange, 2-inch flange, 2.5-inch flange, 3-inch flange, 3-to-2-inch reducer, 3-to-2.5-inch reducer, 14-15mm ring spanner, 12-13mm ring spanner, 14-15mm open-end spanner, 12-13mm open-end spanner, voltage tester, 11 kv gloves, alum, bleaching powder, liquid chlorine, water test kit, 2-inch union, rubber gasket/packing, 2.5-inch flange, 2.5-inch socket, 1.5-inch nipple (1 ft), 6-inch nipple (1 ft), large hammer, 1.25-inch hand pump pipe, hand pump chain, hand pump bearing, hand pump cylinder, brass hand pump upper valve (with rubber), brass hand pump lower valve (with rubber), hand pump axle, water storage tanks (500 l and 1000 l).

Central Government/Public Sector

CTN :44801645

25 May, 2026 NA

Kanpur - Uttar Pradesh

Tender For bid to ras corrigendum : supply of deliverables as per table-5 for fire alarm and control panel system as per edt-2875or etb , supply of deliverables as per table-6 for fire extinguishing system as per edt-2875 for etb at afs k , installation, testing and commissioning of fire alarm and control panel system for etb as per clause , installation, testing and commissioning of co2 based fire extinguishing system for test cell, fuel r