Latest testing equipment scrap Tenders | Government testing equipment scrap Tenders

CTN :44348080

20 Apr, 2026 NA

Rupnagar - Punjab

Tender For corrigendum : all works related to manufacturing, stacking, curing and testing of 21076 nos reinforced cement concrete 500 mm dia 75mm thick anchor blocks as per pspcl specification at pilot workshop sas nagar (mohali). - manufacturing, stacking, curing & testing of 21,076 nos reinforced cement concrete 500 mm dia 75mm thick anchor blocks as per pspcl specification at pilot workshop, sas nagar (mohali) (te no- 04/pwm/2025-26)

State Government

CTN :44739914

06 Apr, 2026 NA

Fatehabad - Haryana

Tender For corrigendum : quotations for f plan and reinforced concrete pipes `jointing plain and reinforced concrete pipes and specials of all classes in trenches using collar joints jointed with 1:1 cement sand mortar nearly dry heavily caulked into joints and with end dowels filled with 1:1 cement sand mortar including facing trowelling and finishing the joints at an angle of 45 degrees with faces of collars keeping joints wet till curved testing the drain lines for leakage and making good all leakage and defects as laid down in the contract specifications complete with two spigot ends jointed to collar and internal diameter of sewer pipe or special being.

corporations/Associations/Others

CTN :44721081

22 Apr, 2026 55.84 Lacs

Ernakulam - Kerala

Tender For supply of supply, installation, testing, and commissioning of 125 kva diesel generator set as per the technical specification attached. duly dismantling the existing 50kva dg set for ers , supply and laying of 3.5 x 150 sqmm aluminium armoured cable with glands and termination for ers territory. , supply and laying of 3.5 x 95 sqmm aluminium armoured cable with glands and termination for ers territory. , earth pit with earth chamber, 2x2 copper plate with 1.5 inch dia with 2mtr long gi pipe b class and suitable size of trench, compound, termination, for ers territory. , supply and laying of 1.5 x 4 core ug cable for using ats function, for ers territory. , 25x3 swg copper strip for using earth conductor, for ers territory. , gsb generator switch board with 200 a mccb as incomer and 2nos 125a mccb as out going with suitable size of busbar and enclosure, for ers territory. , double compression gland for ers territory. , 16 sq.mm copper wire for ers territory. , 16 mm, 4 inch exhaust pipe extension with ms pipe for ers territory. , removal of existing amf panel and fixing of 2nos ats panel for ers territory. , supply of 100 amps ats panel for ers territory , existing dg foundation extension workfor ers territory. , electrical inspectorate scheme preparation, site inspection fee, testing, etc for ers territory. , supply of 15kva diesel generator 3 phase i o, including trasportation, loading and unloading for sbc , supply of 25kva diesel generator 3 phase i o, including trasportation, loading and unloading for sbc , supply of 50 kva diesel generator 3 phase i o, including trasportation, loading and unloading for sbc , supply of materials for provision of concrete foundation for dg set as per site requirement for sbc , installation of concrete foundation for dg set as per site requirement for sbc , installation of dg set on the foundation for dg set for sbc , supply and termination of power cable on amf panel, dg sets and ac main distribution panel for dg set including trenching and laying as per site requirement for sbc , supplying and installation of earthing material for three pits for dg set for sbc

CTN :44721037

11 Apr, 2026 NA

Barmer - Rajasthan

Tender For supply of providing and laying rcc m20 concrete , waterproof cement painting works , supply and installation of acp vinyl sign boards , slogan artwork and hpcl logo painting , vinyl replacement work on existing acp boards , supply and installation of backlit flex boards , granular sub base work , wet mix macadam road work , thermoplastic road marking work , providing and laying 80mm paver block flooring , supply of 4 inch 150 gate valve , supply of double hydrant post is 5290 , supply of frp hose box cabinet , supply of 63mm fire hoses 15m length , supply of jet nozzles with branch pipe , supply of landing valves for hydrant system , supply of 4 sqmm copper earthing cable , stenciling work below 2 inch , stenciling work 2 inch to 4 inch , supply of 12mm ss bolts with nuts and washers , supply of 10mm ss bolts with nuts and washers , supply of 25mm rubber mats for cylinder handling , supply and fixing of precast kerb stones , supply of pressure gauge testing kit , supply of hydrant hose testing kit , supply of lpg hose testing kit , relay testing and thermography of electrical panels , porta cabin flooring repair work cement sheet and pvc carpet , porta cabin interior repair work plywood with lamination , painting work for porta cabin , supply and fixing of zebra blinds , supply and installation of 1.5 tr split air conditioners , supply and installation of 2.0 tr split air conditioners , fabrication and installation of sliding gate parking shed structure , servicing and maintenance of industrial valves , supply and plantation of 4 to 6 ft plants , grass lawn development work , supply of high back revolving chairs , supply of visitor chairs cantilever type , supply of safety belts , supply of industrial l3 managed network switch , supply of 40g sfp modules , supply of 10g sfp modules , supply of 1g sfp to rj45 converter , supply of flow meter , micro grading of ground surface , supply and installation of 150 lph water cooler , supply and installation of ro water purifier , hiring of hydra crane 10 to 14 ton capacity , hiring of tractor with operator , hiring of jcb machine with operator , supply and installation of mitsubishi plc analogue output card

CTN :44726681

08 Apr, 2026 2.29 Lacs

Ajmer - Rajasthan

Tender For supply of equipment and other materials to the lab operated at ganj godown municipal corporation, ajmer. - supply of core cutting machine (diesel/petrol) having specifications max core diameter 200 mm, power source diesel engine, drilling depth 600 mm, motor power 7.5 kw, suitable material concrete, asphalt, rcc, brick, operation mode semi automatic, having arrangement of water supply for test and fitted on wheels. , supply of compression testing machine, 2000kn digital, usage/application cube testing least count in kn 1, frequency 50 hz, automation grade automatic, weight up to 200 kg, motor voltage 240 to 440 v. , supply of core cutting instrument for soil density testing cutter: steel cylinder, 100mm internal diameter, 127.3mm long. accessories: steel dolly (25mm high), rammer. , supply and installation of bitumen testing machine bitumen content determination in bituminous mix having specification capacity 1500 gm, phase 1 phase, frequency 50-60 hz, voltage 220-240v, power source electric. , supply of steel trays having diamention 450 x 350 x 75 mm and heavy-gauge metal (often 18-22 gauge) with reinforced, polished or smooth surface. , supply of rapid moisture meter as per is 12175 specification. including all accessaries. , supply of rebound hammer it should consist of a spring controlled mass which slides on a plunger within a tabular housing, impact energy = 2.25 nm. , supply of scoop ss stainless steel with capacity 500 gm. and 1kg. , supply of digital laser distance meter , supply of vicat apparatus

Central Government/Public Sector

CTN :44687368

13 Apr, 2026 2.75 Crore

Cuddapah - Andhra Pradesh

Tender For tender for supply of earth work in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth , 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m , as directed by engineer-in-charge. all kinds of soil , filling available excavated earth (excluding rock) in trenches , plinth , sides of foundations etc. in layers not exceeding 20cm in depth , consolidating each deposited layer by ramming and watering , lead up to 50 m and lift upto 1.5 m , complete as per directions of engineer-in-charge. , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level 1-3-6 (1 cement - 3 coarse sand (zone-iii) -6 graded stone aggregate 20 mm nominal size) , complete as per directions of engineer-in-charge. , providing and laying in position specified grade of reinforced cement concrete , excluding the cost of centering , shuttering , finishing and reinforcement - all work up to plinth level 1-1.5-3 (1 cement - 1.5 coarse sand (zone-iii)- 3 graded stone aggregate 20 mm nominal size) , complete as per directions of engineer-in-charge. , steel reinforcement for r.c.c. work including straightening , cutting , bending , placing in position and binding all complete above plinth level and below plinth level.thermo-mechanically treated bars of grade fe-500d or 550d , complete as per directions of engineer-in-charge. , centering and shuttering including strutting , propping etc. and removal of form as per directions of engineer-in-charge at all leads and lifta) in foundations , footings , bases of columns , etc.complete as per directions of engineer-in-charge. , centering and shuttering including strutting , propping etc. and removal of form as per directions of engineer-in-charge at all leads and liftb) in superstructure columns , lintels , beams , plinth beams , roofs etc. , complete as per directions of engineer-in-charge. , dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete , complete as per directions of engineer-in-charge. , supplying and filling in plinth with sand under floors , including watering , ramming , consolidating and dressing complete , complete as per directions of engineer-in-charge. , demolishing r.c.c. work manually or by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of engineer - in- charge. , neat cement punning , providing and grouting of pockets with cementitious grout non shrink of approved make by suitable means free flowing pump curing etc complete as per directions of engineer in charge the payment shall be made on the basis of actual weight of approved grout used as per directions of engineer in charge , structural steel work riveted , bolted or welded in built up sections , and framed work like purlins , frames , trusses etc. including cutting , hoisting , fixing in position and applying two coats of synthetic enamel paint over a coat of approved steel primer , complete as per directions of engineer-in-charge.. , providing , laying and jointing glazed stoneware pipes of 150mm dia pipe of class sp1with stiff mixture of cement mortar in the proportion of 1ratio1 1 cement 1 fine sand including testing of joints etc complete as per directions of engineer in charge , constructing masonry chamber 120x120x100 cm inside , in brick work in cement mortar 1-4 (1 cement - 4 coarse sand) for sluice valve , with c.i. surface box 100 mm top diameter , 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and rcc top slab 1-2-4 mix (1 cement - 2 coarse sand - 4 graded stone aggregate 20 mm nominal size) , ic necessary excavation , foundation concrete 1-5-10 (1 cement -5 fine sand - 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1-3 (1 cement - 3 coarse sand) 12 mm

CTN :41503639

30 Mar, 2026 NA

Pune - Maharashtra

Tender For bid to ras supply of upgradation of training lab - servo shake table , digital cbr appratus , electronicdata acquisition unit for single gang bench type for consolidometer appratus , ultrasonic pulse velocity tester , digital rebound hammer , automatic compression testing machine , concrete and transportation eqpt

CTN :44430703

30 Mar, 2026 NA

Jalgaon - Maharashtra

Tender For corrigendum : supply of flexural testing apparatus of concrete - is 9399 (q3)

CTN :44584232

29 Mar, 2026 2.29 Lacs

Ajmer - Rajasthan

Tender For corrigendum : गंज गोदाम नगर निगम, अजमेर में संचालित लैब में उपकरण व अन्य सामग्री सप्लाई का कार्य। - corrigendum: work of supply of equipment and other materials in the lab operated in ganj godown municipal corporation, ajmer - supply of core cutting machine (diesel/petrol) having specifications max core diameter 200 mm, power source diesel engine, drilling depth 600 mm, motor power 7.5 kw, suitable material concrete, asphalt, rcc, brick, operation mode semi automatic, having arrangement of water supply for test and fitted on wheels., supply of compression testing machine, 2000kn digital, usage/application cube testing least count in kn 1, frequency 50 hz, automation grade automatic, weight up to 200 kg, motor voltage 240 to 440 v., supply of core cutting instrument for soil density testing cutter steel cylinder, 100mm internal diameter, 127.3mm long. accessories : steel dolly (25mm high), rammer., supply and installation of bitumen testing machine bitumen content determination in bituminous mix having specification capacity 1500 gm, phase 1 phase, frequency 50-60 hz, voltage 220-240v, power source electric., supply of steel trays having diamention 450 x 350 x 75 mm and heavy-gauge metal (often 18-22 gauge) with reinforced, polished or smooth surface., supply of rapid moisture meter as per is 12175 specification. including all accessaries., supply of rebound hammer it should consist of a spring controlled mass which slides on a plunger within a tabular housing, impact energy = 2.25 nm., supply of scoop ss stainless steel with capacity 500 gm. and 1kg., supply of digital laser distance meter, supply of vicat apparatus

State Government

CTN :44560347

04 Apr, 2026 NA

Jharsuguda - Odisha

Tender For supply of quality lab items - digital compression testing machine, slump test apparatus, standard is sieves set (gi 450mm dia), standard is sieves set (brass 200mm dia), hot air oven, electronic weighing balance -100kg, electronic weighing balance -30kg, electronic weighing balance -600g, aggregate impact testing machine, aggregate crushing value apparatus, elongation gauge 350mm x 40mm, flakiness gauge 310mm x135 mm, electrical sieve shaker, water bath, concrete baby mixture machine, concrete vibrating table, cement mortar cube vibrating, machine, cement mortar cube vibrating, table, bulk density, container(30kg,15kg,3 kg), density basket, concrete test hammer, pocket concrete penetrometer, cube mould (150x150x150mm), cube mould, (70.6x70.6x70.6mm), vicat apparatus, sp. gravity test bottle, pycnometer bottle, le chartlier apparatus, hot plate, wheel barrow 1 cft capacity, los angeles abrasion testing, machine, flow table apparatus for scc, v- funnel apparatus, u shape box apparatus, l box apparatus, proctor compaction mould, (light), proctor compaction mould, (heavy), proctor rammer - 4.9 kg., heavy, proctor rammer - 2.6 kg light, 100mm dia sand pouring, cylinder, 200mm dia sand pouring, cylinder, 100mm dia core cutter, apparatus, liquid limit device, plastic limit sets, soil cone penetrometer, rapid moisture metter, soil riffler divider/splitter, soil hydrometer, pycnometer bottle, bitumen extractor, moisture can, universal automatic compactor, digital vernier caliper, digital thermometer, digital hygrometer, digital ph meter, measuring cylinder - glass -, 100 ml, measuring cylinder - plastic -, 500 ml., measuring cylinder - plastic -, 250 ml., jug measuring cylinder -, plastic-1000ml, measuring tape steel - 5 mtr., sprit level 300mm, gauging trowel 200mm, gauging trowel 150mm, mason trowel (big size), finishing trowel / gurumala, scoops - 2000gms, gi tray (1m x1m), gi tray, enamel trays, enamel trays, chisels 300mm long, 0.5 kg hammer, spatula 300mm long, straight edge 300mm long x, 5mm thick, nylon brush, wash bottle 500ml ldpe, plastic, asbestas hand gloves sets, bitumen cleaning agent, benzine, standard sand (grade 1,2,3) -, 25 kg each

Testing Equipment Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

Central Government/Public Sector

State Government