Latest testing item scrap Tenders | Government testing item scrap Tenders

Central Government/Public Sector

CTN :45306043

13 Jun, 2026 40.00 Lacs

Jammu - Jammu And Kashmir

Tender For maintenance of day to day complaints of water supply including connected items at various loc under ge nagrota - m&l for repair/rectification of leakage to water supply distribution lines 15 mm dia to 25 mm dia gi tubing by necessary excavation, returning/filling as required, tightening of loose joints of union, elbow, socket etc, threading if required including replacement of gi union/socket/nipple as required complete all as specified and directed., all as per srl item no.1 above but for gi tubing of 40 mm dia to 50 mm dia complete all as specified and directed., all as per srl item no.1 above but for gi tubing of 80 mm to 150 mm dia complete all as specified and directed., all as per srl item no.1 above but for gi tubing /di /ci /ms of 150 mm dia to 300 mm dia complete all as specified and directed. note : (i) the complaints for the above works shall be registered by contractor at the water supply complaint cell of age e/m (ii) stationary required such as complaint book, job cards etc shall be arranged by the contractor and proper record shall be maintained by the contractor.(iii) tools ,plumber with helper and transport with driver for attending of above complaints shall be arranged by contractor. (iv) the rate quoted by the contractor for above jobs under item no 1 to 4 shall be inclusive of cost of works under note (i) to (iii) above. (v) the said complaints shall be rectified within 12 hrs of the registration of the complaints failing which recovery of rs.500/commplaint shall be made for contractors due payment (vi) the stores/item required for the works under item no 1to 4 shall be measured separately under relevant item as supply only. (vii) excavation, returning/ filling shall be measured and paid for separately and material required for the works above shall be included to quoted rates., excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep including getting out in hard/dense soil complete all as specified and directed., returning /filling including watering , leveling , spreading and well ramming in layers not exceeding 25cm thick complete all as specified and directed., removing excavated material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 50 metre above the starting point complete all as specified and directed., refixing/relaying of old retrieved steel tubing in new or old position with and including new gi fittings (connections) and as per site requiremen laid in trenches, above ground level or in any position of following sizes as under complete all as specified and directed : -, 15 mm dia, 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, taking down unserviceable gi tubing / upvc tubing from any position complete with all fittings & connections from any position of following sizes as under complete all as specified and directed :-, 15 mm dia, 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, supply and fixing/laying & testing of galvanised steel water tubing, medium grade, isi marked complete with all new galvanized fittings of following sizes laid in trenches/ above ground level or in any position complete all as specified and directed :, 15 mm dia, 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, supply and laying upvc pipe tubings medium grade pressure rating 10 kgf/cm2 isi mark with all fittings such as elbow, bends, sockets, nipples and union etc and fixed complete laid in trenches or in any other position of following sizes as under complete all as specified and directed , 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, supply only gi fittings, medium grade, isi marked of following sizes as under complete all as specified and directed :-, union 15 mm dia, union 20mm dia, union 25mm dia, union 32mm dia, union 40mm dia, union 50mm dia, socket 15 mm dia, socket 20 mm dia, socket 25 mm dia, socket 40 mm dia, socket 50 mm dia, reducer socket 40mmx50mm, reducer socket 15mmx20mm, reducer socket 20mmx25mm, elbow 15mm dia, elbow 20mm dia, elbow 25mm

State Government

CTN :45289932

29 May, 2026 NA

Balurghat - West Bengal

Tender For supply of item rate for construction materials for all types of construction works under mgnrega - hire charges of coaltar boiler 900 to 1400 litres, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, production cost of concrete by batch mix plant, hire charges of diesel truck-9 tonne, hire charges of sparaying machine including electric charges, hire charges of coaltar sprayer, hire charges of barber green, drying,mixing and asphalt plant, with accessories, capacity 30/45 tonne, pumping charges of concrete including hire charges of pump, piping work & accessories etc., hire charges of derrick monkey rope, hire charges of pump set of capacity 4000 litres/hour, vibrator (needle type 40 mm), machine for rubbing of floors, front end loader capacity 1.00 cum, hire and running charges of tripod and mechanical winch machine complete with power unit and accessories, mastic cooker, hire and running charges of tipper, hire and running charges of loader, hand grinder for mirror polish, hydraulic excavator (3d) with driver and fuel, pin vibrator, surface vibrator, hot bitumen mixer 0.5cum i/c hand cart, hire and running charges of hydraulic piling with power unit etc. including complete accessories and shifting at site, hire and running charges of light crane, hire and running charges of bentonite pump, hire and running charges of vibrating pile driving hammer complete with power unit and accessories, hire and running charges of crane 20 tonne capacity, carriage of concrete by transit mixer, generator 250 kva, paint applicator, mobile crane, tractor with ripper attachment, tractor with trolley, air compressor 250 cm with two leads for pneumatic cutters/hammers, joint cutting machine with 2-3 blades, c.c.batch mix plant, road sweeper, slip form paver with sensor, water tanker 5000 ltr. capacity, concrete joint cutting machine, texturing machine, dozer d-80-a12, motor grade 3.35 meter blade, hydraulic excavator of 1 cum bucker, front end loader 1 cum bucket capacity (incl pol), tipper -5 cum, vibratory roller 8 to 10 tonne, smooth wheeled roller 8 to 10 tonne, tandem road roller, water tanker 5 to 6 kl capacity, air compressor, wet mix plant 60 tph, mechanical broom hydraulic, emulsion pressure distributor @1750 sqm per hour, hot mix plant - 120 tph capacity, hot mix plant 100 tph capacity, paver finisher hydrostatic with sensor control 100 tph, paver finisher mechanical 100 tph, batching and mixing plant @75 cum per hour, concrete paver finisher with 40 hp motor and sensor, generator 250 kva, generator 100 kva/125, truck 5.5 cum/ 10 tonnes, road sweeper (mechamical broom) @ 1250 sqm per hour, drum type hmp of 60-90 tph capacity @ 75 tonne per hour actual output, hire and running charges of drill machine up to 400 mm dia (including cost of mobile oil, disesel consumption in ordinary soil operator), pile integrity testing equipment, excavation of diaphragm wall by mechanical grab, hire charges of tata 407 or equivalent for local shifting, hire charges of diesel truck - 9 tonne (without pol), using cost of ultra voilet radiation tube, compressor, gun, rubber pipes & other accessories - hire charge of plant & machinery i/c necessary fuel, hire charges of suction jeting machine 2200 psi machine i/c pol and operator, hire charges of drill machine upto 30 mm dia, hire charges of sand blasting equipment, hire charges of compressor, welding charges of shear key to existing reinforcement, hire charges of plant and machinery that can inject 350 kg/day, seam bolts and nuts 6 mm dia and 25 mm long, fibre (high impact poly propelene reinforced) cement corrugated sheet 6 mm thick, fibre (high impact poly propelene reinforced) cement close fitting adjustable ridge, fibre (high impact poly propelene reinforced) cement corrugate serrated adjustable ridge, fibre (high impact poly propelene reinforced) cement plain wing adjustable ridge, fibre (high impact poly propelene reinforced) cem

Central Government/Public Sector

CTN :45319730

04 Jun, 2026 NA

Golaghat - Assam

Tender For providing of operation and maintenance of other machines and plants - online diagnostic testing of ht motors for two years at nrl site item 10 motor current signature analysis,operation and maintenance of other machines and plants - item 20 vibration measurement of motors,operation and maintenance of other machines and plants - item 30 acoustic emission analysis of motors,operation and maintenance of other machines and plants - item 40 emi testing of motors

CTN :45303437

26 May, 2026 43.5 Thousand

Delhi - Delhi

Tender For provision of electrical item at the residence office of shri gaurav goyal, joint secretary, new delhi.subwork/packages:provision of electrical item at the residence office of shri gaurav goyal joint secretary, new delhi. - supplying , installation, testing and commissioning of air cooled hi wall split type air conditioners complete with indoor unit(idu), out door unit (odu), surface / concealed copper refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 mtr (idu to odu), copper power cable upto 3.5 mtr (idu to odu) i/c drain pipe r-32/r-410/ r-407 green refrigerant, wireless remote control, suitable for working between 180- 260v with low & high voltage cutoff and 50 hz ,1 phase ac supply capable of performing cooling, dehumidification, air circulation of following capacity with scroll / rotary compressor. the system shall be able to deliver 100% of the rated capacity upto 42 0c. min 5 year original equipment manufacturer (oem) warranty both compressor and printed circuit board (pcb). must comply : electrical cable is 694 or is 9968 temperature sensing control is/international electrotechnical commission (iec) 60730, hermetic compressor is 10617, heat exchanger is 11329, capacitor is 2993 and motor is 12615. complete as per cpwd specification and is : 1391 part ii 2023. the system shall be able to operate up to 50 0c (out door ambient temperature). inverter type - cooling only

CTN :45203461

04 Jun, 2026 10.00 Lacs

Bhopal - Madhya Pradesh

Tender For supply of elctric item coolar repair and others items - supply of electric item, supply coolar, and plumbering item, repairing work and other item, desert cooler (iron body) complete 90 100 liters, desert cooler (fiber body) complete 90 100 liters, desert cooler (iron body) complete, 70 80 liters, desert cooler (fiber body) complete, 70 80 liters, room cooler (iron body) complete, 40 50 liters, room cooler (fiber body) complete, 40 50 liters, cooler motor (copper winding), all capacity, cooler pump, all capacity, cooling pad (wood wool / honeycomb), fan blade / cooler fan, air deflector / front grill (jali), motor stand / clamp, bearing (motor/fan), capacitor, belt (if applicable), water tank repair / replacement, float valve, drain plug, overflow pipe, water distribution pipe system, switch board with regulator, electric wiring work, mcb / fuse protection, earthing wire, 3 pin plug top, wheel / stand, iron body repair (welding, painting), fiber body repair (crack fixing), installation charges (new cooler), transportation charges, complete servicing (cleaning, repair, testing & commissioning), old cooler repair (complete overhauling) per unit, disposal of scrap / old parts, warranty on parts & service minimum 1 year, new cooler technical specification (air delivery, power, copper motor), rate inclusive of all taxes, ceiling fan new, 48 inch / 1200 mm, wall fan new, 16 inch / 400 mm, ceiling fan motor, wall fan motor, fan blade (ceiling/wall), capacitor (fan), fan regulator, oscillation mechanism (wall fan), fan guard / grill (wall fan), down rod (ceiling fan), shackle / clamp kit (ceiling fan), fan wiring & installation, fan repairing / servicing (complete), bearing replacement (fan), fan cleaning & overhauling, pvc pipe 1 inch, pvc pipe 1.5 inch, pvc pipe 2 inch, pvc pipe 3 inch, pvc pipe 4 inch, pvc elbow 1 inch, pvc elbow 1.5 inch, pvc elbow 2 inch, pvc elbow 3 inch, pvc elbow 4 inch, pvc tee 1 inch, pvc tee 1.5 inch, pvc tee 2 inch, pvc tee 3 inch, pvc tee 4 inch, pvc socket 1 inch, pvc socket 1.5 inch, pvc socket 2 inch, pvc socket 3 inch, pvc socket 4 inch, pvc reducer 1x inch, pvc reducer 2x1.5 inch, pvc bend 2 inch, pvc bend 3 inch, pvc bend 4 inch, pvc door tee 2 inch, pvc door tee 3 inch, pvc door tee 4 inch, pvc p trap 1.5 inch, pvc p trap 2 inch, pvc floor trap 4x4 inch, pvc floor trap 5x5 inch, pvc nahani trap standard size, pvc end cap 1 inch, pvc end cap 2 inch, pvc end cap 3 inch, pvc end cap 4 inch, pvc pipe clamp all sizes, pvc solvent cement 100ml, pvc solvent cement 250ml, cpvc pipe inch, cpvc pipe inch, cpvc pipe 1 inch, cpvc elbow inch, cpvc elbow inch, cpvc elbow 1 inch, cpvc tee inch, cpvc tee inch, cpvc tee 1 inch, cpvc socket inch, cpvc socket inch, cpvc socket 1 inch, cpvc union inch, cpvc union inch, cpvc union 1 inch, cpvc female adapter inch, cpvc female adapter inch, cpvc male adapter inch, cpvc male adapter inch, cpvc brass elbow inch, cpvc brass tee inch, cpvc ball valve inch, cpvc ball valve inch, cpvc ball valve 1 inch, cpvc tank nipple inch, cpvc tank nipple inch, cpvc tank nipple 1 inch, cpvc pipe clamp all sizes, cpvc solvent cement standard, bib cock tap inch, pillar cock tap inch, angle valve inch, concealed stop cock inch, sink cock standard size, swan neck tap standard size, ptmt tap inch, brass tap inch, shower set standard size, health faucet standard size, jet spray set standard size, connection pipe 18 inch, connection pipe 24 inch, connection pipe 36 inch, waste coupling standard size, bottle trap 1.25 inch, flush valve standard size, western commode standard size, indian toilet seat standard size, wash basin standard size, urinal standard size, cistern tank 5 liter, cistern tank 10 liter, pvc flush pipe standard size, seat cover standard size, basin waste pipe 1.25 inch, mirror standard size, soap dish standard size, towel rod standard size, water tank 500 liter, water tank 1000 liter, water tank 2000 liter, ball valve inch, ball valve inch, ball valve 1 inch, tan

Central Government/Public Sector

CTN :45249380

10 Jun, 2026 NA

Sealdah - West Bengal

Tender For e-tender for procurement of essential drug items under table-a, for one year from the date of aoc. - amitriptyline hcl tab.i.p. 10mg., aripiprazole tab 5 mg, cefpodoxime oral suspension 50mg/5ml, cefpodoxime proxetil 200 mg tab i.p, ciprofloxacin hcl tab. i.p. 500mg (scored ), clindamycin inj. 600mg./ 4 ml amp/vial., doxycyclin capsules 100mg, glimipride 2 mg tab, ibuprofen i.p. 400 mg tab., isoniazid tab.i.p. 300mg, levetiracetam ip tab 500 mg, levetiracetam syrup 100 mg/ ml in 100 ml bottle, lignocaine hcl gel i.p 2% w/w, meropenem inj 500mg/vial, metformin tab 500 mg (sr/pr/er), o.r.s i.p. as powder for reconstitution,cont.:sod. chloride 2.6gm.,dextrose (anhydrous13.5gms ,pot.cl 1.5 & sod.citrate 2.9gms (total 20.5per packet)., omeprazole caps.i.p. 20mg., oseltamivir syrup ip (oseltamivir phosphate) 12 mg/ml, 75 ml phial, pantoprazole 40 mg. tab. (enteric coated), paracetamol 1000 mg tab., paracetamol i.p. 125 mg. tab., paracetamol i.p. 500 mg. tab., paracetamol i.p. 650 mg. tab. (scored), pramipexole tab 0.25mg, prednisolone tab 10 mg, propranolol hcl tablet i.p. 10mg, propranolol hcl tablet i.p. 40mg, salbutamol syrup i.p. 2mg./5ml., telmisartan tab 80 mg, tramadol hcl 50 mg tab., important note: 1. all prospective bidders are requested to quote the rate in boq as per accounting unit & item specification as mentioned in the table-a. wrong quoting of the rate in boq will be dealt with as per penal provisions of the t&c of the tender.2. tendered quantity is just a tentative quantity and should not be treated as final. it may increase or decrease, as per need of the state. keeping this in mind, the supplier is not allowed to seek termination of the rate contract after finishing supply of tendered quantity.3. quality of the product supplied, may be ascertained by testing / physical examination by the experts at any stage of the tender period.4. the prospective bidders of the said tender are requested to make a declaration in affidavit under annexure vi(b) in case of sole manufacturer/importer (i.e. proprietary in nature).5. if the item(s) under sole manufacturer / importer is (are) proprietary in nature, quarterly intimation is solicited from the approved bidders positively regarding the status of their item(s) proprietary in nature, otherwise their item(s) will be blocked in the smis.6. in case of tie bid, decision will be taken by the tia as per g.o. no. 2320-f(y), dated 07.06.2022 issued from finance department audit branch (group t).

Central Government And Public Sector

CTN :44846089

25 May, 2026 94.44 Lacs

Chandigarh - Chandigarh

Tender For bid to ras corrigendum : supply of supplying of 1.5 tr nominal capacity invertor type metal body , installation, testing and commissioning of of 1.5 tr inverter type ductable air cooled split ac unit as per item no.1 above in equipment room , providing and fixing heavt duty powder coated m s stand of suitable size made out of suitable guage ms shee , supply and fixing of 3 core 2.5 sq mm control cum transmission wiring and ac power supply cable of shielded copper conductor for looping between indoor and outdoor , supply and fixing of 4 core 1.5 sq mm control cum transmission wiring and ac power supply cable of shielded copper conductor for looping between indoor and outdoor , supply installation testing and commissioning including vaccumiazation and nitrogen testing of , supply installation testing and commissioning including vaccumiazation and nitrogen , supplying and fixing of 25 mm sizes of rigid upvc piping from outlet socket of ac unit complete with elbow , supplying and fixing dp sheet steel enclosure on surface or recess along with 25 or 32 a 230 v c curve dp mcb , supplying and fixing 5 amps to 32 amps rating, 240 or 415 volts c curve miniature circuit breaker suitable for inductive load of single pole and neutral , providing and fixing supply air grills of powder coated aluminum construction having a free area of not less than 70 percent without volume control dampers , supplying and installing of 150 mm width 50 mm depth 1.6 mm thickness nominal size of perforated hot dipped galvanised iron cable tray

Central Government/Public Sector

CTN :45284644

12 Jun, 2026 NA

Jodhpur - Rajasthan

Tender For supply of permanent magnetic yoke (rope type) to carryout magnetic particle testing (wet and dry method) as per. is: 3703/2004.the technical specification is given below; 1) lifting power : 20kg or more with pole spacing 100mm.2)magnetic field: constant level.3)poles adjustment : 0-300mm. 4)tangential field strength :minimum value of 30g.5)equipment weighs not more than 400grams.. note: item to be supplied along with calibration, test certificate and warranty certificate and equipment manual. as per specification is: 3703/2004(copy enclosed) or latest make: orion/ferflux/ecci/magnaflux/pic /sims or equivalent [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45209964

15 Jun, 2026 NA

Multi City - Multi State

Tender For supply installation, testing & commissioning of gps based ohe monitoring & current collection system oliver-g. as per rdso spec no is/rdso-ti/0001:2023 or latest along with all accessories/authentic software as per mentioned specification necessary for mapping with additional power back up. (1) whileproviding complete set of oliver g plus, data loading with one round of testing with consignee person in included with the above item. (2) as per rdso specification supply of laptop with core i 7 with minimum 8 gb ram, 512 ssd hdd, gps for location tracing, and magnet based mounting system. (3) for route mapping provision of the equipment and man power, the location report will be shared to consignee in csv format also loading the new rout data to oliver g system. (4) additional license data logging software will also be provided with above item(5) with magnetic mounting of camera. (6) above the all these specifications the system should capable to detect spark in day time (sun light). [ warranty period: 30 months after the dateof delivery ] ]

Central Government/Public Sector

CTN :45283132

29 May, 2026 NA

Kanpur - Uttar Pradesh

Tender For supply, installation, testing and commissioning of set of spares for 300t press machine as per annexure- a attached. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Testing Item Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors