Latest testing system Tenders | Government testing system Tenders

State Government

CTN :43563694

23 Jan, 2026 NA

Pune - Maharashtra

Tender For repair and overhauling service - sushobhikaran va sudharna tadmajla classroom; sushobhikaran va sudharna tadmajla classroom; yes; buyer premises-1 providing and fixing classroom table made of 19 mm thick plywood, finished with thick decorative laminate of approved shade and make on top surface and balancing laminate on bottom. sq.ft 700 table size shall be 14 feet (l) 2.5 feet (w) with suitable internal framing, stiffeners, and supports to ensure rigidity and durability. all exposed edges shall be finished with hardwood lipping. 2 providing and fixing step-up platform table made from 19 mm thick plywood, finished with decorative laminate on top and balancing laminate on underside. sq.ft 1408 structure shall be strong enough to withstand continuous foot traffic, with proper support framing and anti-warping construction. edges to be finished with hardwood lipping. complete in all respects including material, labour, fixing, and finishing as per site requirement. 3 providing and fixing professor table made of 19 mm thick plywood, finished with decorative laminate on top surface and balancing laminate below. sq.ft 40 table shall be ergonomically designed with appropriate height and working space suitable for faculty use. edges shall be properly finished with hardwood lipping. 4 providing and fixing lecture podium made of thick plywood, finished with thick decorative laminate on all exposed surfaces. sq.ft 32 design shall be suitable for classroom / lecture hall use with slanted top surface for documents. edges to be properly finished and rounded for safety. complete including all fittings, labour, and finishing. 5 providing, making and fixing 35 mm thick flush door shutter made from solid core , laminated with decorative laminate on both sides of approved make and shade. no 4 door shall include all necessary hardware fittings such as hinges, handles, tower bolt, door stopper, and locking arrangement of approved make. 6 providing and fixing wall-towall floor carpet of approved quality, colour, and thickness suitable for classroom use, laid over prepared floor surface. sq.ft 1664 carpet shall be fixed using approved adhesive, properly stretched, aligned, and finished to avoid wrinkles and gaps. chairs for class room 7 providing and fixing classroom chair made of heavy-duty ms tubular frame, properly welded, ground smooth and finished with powder coating of approved colour to ensure corrosion resistance and durability. nos 120 8 providing and fixing faculty chair made of heavy-duty nylon base , finished to resist corrosion and wear, suitable for continuous institutional use. the chair shall be nos 4 ergonomically designed, with medium back support, moulded pu foam cushioned seat and back, upholstered with fabric of approved make and shade. false ceiling for class room 9 providing and fixing 2 feet 2 feet grid false ceiling system consisting of approved quality pre-painted gi framework, including main runners, cross tees, wall angle, suspenders, dash fasteners, and all accessories, suspended from rods, complete in all respects. sq.ft 1664 electrical work for class room 10 supply and installation of electrical conduits, pipes, copper wiring, and cabling of approved make and size including junction boxes, accessories, testing, and commissioning. nos 1664 providing and fixing of switch and socket supply and installation of 2 2 led panel light fixtures of approved wattage suitable for false ceiling mounting. smart interactive panel and audio system 11 supply, installation, testing, and commissioning of smart interactive flat panel display (ifpd) suitable for classrooms. nos 4 having features follows:- led interactive flat panel multi-touch technology built-in operating system & hardware audio & connectivity 12 pa amplifier shall be solidstate type, with inbuilt tone control, microphone and auxiliary inputs, master volume control, and overload protection. nos 4 13 providing, supplying, installing, testing and commissioning podium m

CTN :43595931

02 Feb, 2026 53.72 Lacs

Multi City - Chhattisgarh

Tender For design, construction, testing, commissioning and setting up of material recovery facility (mrf) & compost plant in municipal areas of indouri, chhattisgarh 3rd call

CTN :43601912

29 Jan, 2026 NA

Multi City - Chhattisgarh

Tender For request for proposalfordesign, construction, testing, commissioning and setting up of material recovery facility (mrf) & compost plant in municipal areas of sarsiwa, chhattisgarh (2nd call)

CTN :43581318

05 Feb, 2026 5

Lucknow - Uttar Pradesh

Tender For supply of engine machine job of bolero safari sml bus and gypsy e e -shaft allignments and grinding , safari 04 connecting rod alignment , safari 04 connecting rod bush fitting and boring , safari cylinder head seat cutting , safari cylinder head valve guide fitting and remering , safari cylinder head steel seat fitting , safari cylinder head facing , safari cylinder block sleeve fitting and checking , safari cylinder block and head checking water and oil ways leakage , safari repair and service of turbocharger with material and labour , safari repair and service of self stater with material and labour , safari high pressure pump overhauling with material and labour , safari nozzles overhaulling 4 nos with material and labour , safari alternator repair and service with material and labour , safari diagnostic tool checking for tata safari storme , safari flywheel turning for tata safari storme , safari power strg repairing with material and labour , sml bus fuel injection pump repairing with material and labour , sml bus fuel injector testing 04 nos , sml bus strg gear box repairng with material and labour , sml bus cyl head valve seat cutting and new seat fitting , sml bus crank shaft allignments and grinding , sml bus 04 connecting rod alignment , sml bus 04 connecting rod bush fitting and boring , sml bus cylinder head seat cutting , sml bus cylinder head valve guide fitting and remering , sml bus cylinder head steel seat fitting , sml bus cylinder head facing and testing , sml bus cylinder block sleeve fitting and checking , sml bus cylinder block head checking for water ways oil ways leakage , sml bus repair and service of self stater with material and labour charge , sml bus flywheel turning for sml bus , sml bus repair and service of alternator with material and labour charge , sml bus radiator tank repair and cleaning bolero radiator tank repair and cleaning, bolero head facing & checking, bolero fuel injection pump repairing with material and labour, bolero fuel injector testing 04 nos, bolero power strg repairing with material and labour, bolero cyl head valve seat cutting & new seat fitting, bolero crank shaft allignments and grinding, bolero 04 connecting rod alignment, bolero 04 connecting rod bush fitting and boring, bolero cylinder head seat cutting, bolero cylinder head valve guide fitting and remering, bolero cylinder block sleeve fitting and checking, bolero cylinder block head checking for water ways oil ways leakage, bolero repair and service of self stater with material and labour charge, bolero flywheel turning, bolero repair and service of alternator with material and labour charge, m gypsy repair and service of alternator with material and labour charge, m gypsy head facing & checking, m gypsy fuel injector testing 04 nos, m gypsy cyl head valve seat cutting & new seat fitting, m gypsy crank shaft allignments and grinding, m gypsy 04 connecting rod alignment, m gypsy 04 connecting rod bush fitting and boring, m gypsy cylinder head valve guide fitting and remering, m gypsy cylinder block sleeve fitting and checking, m gypsy cylinder block head checking for water ways oil ways leakage, m gypsy repair and service of self stater with //bid details 2 / 49

CTN :43537562

19 Jan, 2026 2.26 Lacs

Chandigarh - Chandigarh

Tender For maintenance of electrical installation in non residential building at chandigarh (replacement of defective electrical accessories and led fittings in mental health institute, sector-32, chandigarh). - dsr item no. 1.17 supplying and drawing following sizes of frls/hffr pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required., 3 x 1.5 sq. mm, 3 x 2.5 sq. mm, 3 x 4 sq. mm, dsr item no. 1.21 supplying and fixing of following sizes of medium class pvc conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required., 25 mm, dsr item no. 1.24 supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required., 5/6 amps switch, 15/16 a switch, 3 pin 5/6 a socket outlet, 6 pin 15/16 a socket outlet, dsr item no. 1.25 supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required., dsr item no. 8.7 led panel light 2x2 ft.(system lumen efficacy 120 135 lm/watt) (recess/ surface type) (please refer dnit for complete specification of item no.5), 36 watt, dsr item no. 8.1 led down lighter (smd type) (system lumen efficacy 105 120 lm/watt ) (please refer dnit for complete specification of item no.6), 12 -15 watt, s/e of 18watt./20watt. 4 long led tube rod made of polycarbonate material should be installed in existing led fitting base only. the make of led tube rod should be same of existing led fitting i.e. philips/ wipro/bajaj/crompton/ havells/lighting technologies/ trilux/ panasonic/ surya/jaquar make only. the job includes the cost of testing and commissioning of led tube rod, other petty material and labour etc. as required to complete the job to the entire satisfaction of engineer in charge.(please refer dnit for complete specification of item no.7), supply, erection, testing and commissioning of the following accessories after dismantling the burnt out/ defective accessories with the help of ladder if required which shall be arranged by the firm at his own cost. the job includes cost of making connections with suitable rating copper wire and petty material required to complete the job to the entire satisfaction of engineer-in-charge., s/e of electronic driver suitable for existing 2 x2 /1 x4 led panel type fitting. the driver should be same make of existing fitting i.e. philips/ bajaj/ wipro/ crompton/ surya/ jaquar/ panasonic/ havells/ lighting technologies/ trilux only.

CTN :43599762

27 Jan, 2026 8.49 Lacs

Tarapur - Maharashtra

Tender For collection of free issue material, fabrication, welding, inspection, testing and delivery of ss 304l ilw-2 ix column (06nos.) at rwm tarapur

CTN :43582809

05 Feb, 2026 14.07 Lacs

Delhi - Delhi

Tender For supply of supply of 8.5 ton ductable ceiling mount air conditioning plants equipment , supply and installation of 28.60 mm copper pipes of 15 mtr length each with suitable insulating material from indoor unit of 8.5 ton ac plant to outdoor unit. , supply and installation of 15.88mm copper pipes of 15 mtr length each with suitable insulating material from indoor unit of 8.5 ton ac plant to outdoor unit. , supply of 10 sq. mm 4 core copper cables and wiring of equipment upto switch board. , supply of 1.5 sq.mm 8 core copper control cables and wiring of equipment upto switch board. , supply of 4 sqmm 4 core copper cables and wiring of equipment upto switch board. , supply of pvc conduit pipe and other required misc. hardware as per requirement , misc work for hanging the machine with 10mm full threaded g.i. rod incl. dismantling of old existing 5.5 ton indoor units, minor repair work and dismantling of false ceiling if required. , providing and fixing of ms stand of proper size suitable for the outdoor unit. the stand should be made up of mild steel of size 50mmx50mmx5mm. , supply of misc. items required for completion of installation such as nut bolts, rubber gasket, hard pvc drain pipe with insulation approx 30mtr, 6 swg gi earth wire, copper lugs and glands etc. , providing and fixing of canvas of reputed make in between the plenum and machines , providing and fixing of g.i. volume control dampers for 8.5 ton ductable ac unit , providing, fabrication and fixing of powder coated aluminum diffusers with aluminum volume control damper for supply air of size 595mmx595mm , providing, fabrication and fixing of powder coated aluminum diffusers without damper for return air of size 595mmx595mm , providing and fixing of 63 amp tpn with mcb box , installation, testing and commissioning of 4x8.5 ton ductable air conditioning plants and dismantling of 4 nos old existing 5.5 ton ac outdoor units. //bid details 2 / 25

CTN :43529438

19 Jan, 2026 29.5 Thousand

Mathura - Uttar Pradesh

Tender For bid to ras providing of selection of laboratories for testing of products/material - soil; soil investigation for provn of 04 x jcos single living accn for 106 med regt; soil investigation for provn of 04 x jcos single living accn for 106 med regt; soil investigation for pr..

CTN :41752308

28 Jan, 2026 3.10 Crore

Sanganer - Rajasthan

Tender For corrigendum : design, manufacture, testing at manufacturer works, supply, delivery and commissioning of 6 nos. tower material fabrication machines at fabrication store, sanganer, jaipur against tn-1153

CTN :43541507

02 Feb, 2026 1.45 Crore

Amritsar - Punjab

Tender For testing of all building material in irrigation and power research institute amritsar for the year 2025 26

Testing System Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government