Get complete information related to latest Tether Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Tether Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Tether Tenders.
Tender For corrigendum : supply of remotely operated vehicremotely operated vehicle : : - vehicle frame , thrusters , control system , tooling and sensors , tether for communications
Tender For supplying of materials for day to day electrical maintenance work for qtrs at sarojini nagar, sewanagar, delhi cantt.a.g.road kali bari p t colony under pesd-iii, ndgpo, new delhi.. -pvc insulated copper conductor, single core cable as required., g modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required., supplying call bell/ buzzer suitable for single phase, 230 volts, complete as required, supplying following rating, 240/415 v, 10 ka, “c” curve, miniature circuit breaker/isolators suitable for inductive load of following poles etc. as required., suplying of 4 feet(approx) 20watt led poly carbonate tubular lamp with driver suitable for 230v, 50hz ac supply etc as reqd.(m/s havells/philips/wipro or ss make), supply, installation, testing and commissioning of ceiling fan with brush less direct current (bldc) motor, class of insulation: b, 3 nos. metal (aluminum alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/al body power factor not less than 0.9, service value (cm/m/w) minimum as below, 350 rpm (tolerance as per is : 374-2019), thd (total harmonic distortion) less than 10%, remote (preferably mobile app based) for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree c (max.), insulation resistance more than 2 mega ohm, suitable for 230 v, 50 hz, single phase ac ceiling fan compliant to is 374:2019 fan supply, earthing etc. complete as req
Tender For supplying of materials for day to day electrical maintenance work for po bldgs under sspo south south-west division under pesd-iii, ndgpo, new delhi. - pvc insulated copper conductor, single core cable as required., g modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required., supplying call bell/ buzzer suitable for single phase, 230 volts, complete as required, supplying following rating, 240/415 v, 10 ka, “c” curve, miniature circuit breaker/isolators suitable for inductive load of following poles etc. as required., suplying of 4 feet(approx) 20watt led poly carbonate tubular lamp with driver suitable for 230v, 50hz ac supply etc as reqd.(m/s havells/philips/wipro or ss make), supply, installation, testing and commissioning of ceiling fan with brush less direct current (bldc) motor, class of insulation: b, 3 nos. metal (aluminum alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/al body power factor not less than 0.9, service value (cm/m/w) minimum as below, 350 rpm (tolerance as per is : 374-2019), thd (total harmonic distortion) less than 10%, remote (preferably mobile app based) for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree c (max.), insulation resistance more than 2 mega ohm, suitable for 230 v, 50 hz, single phase ac ceiling fan compliant to is 374:2019 fan supply, earthing etc. complete as req
Tender For e-quotation for seeking firm rates of plant and machinery and materials category items for preparation/amendment of schedule of rate for the year 2026. - m 1055 - pumps supplying submersible pump sets confirming to is 8034 and motor confirming to is 9283. pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/ noryl impeller. motor suitable for working on 415v+10%, 3ph, 50 hz, a.c. supply with cable guard, thrust carbon/ fiber bearing to withstand entire hydraulic thrust, water proof winding shall be provided. the pump set shall be suitable for direct coupling. pump shall have suitable outlet as per manufacturers design. anti thrust stream lined non return valve shall be provided with pump. 3 meter submersible copper conductor cable in single/ double run shall be provided with each pump., submersible pump set 100 mm dia (with polypropylene/ noryl impeller) up to 20 stages 1 h.p. , 1.5 hp, 2 hp, 2.5 hp, 3.0 hp, 4.0 hp, 5.0 hp, submersible pump 150 mm dia (with bronze/ss impeller) up to 8 stages, 1.5 hp, 2.0 hp, 3.0 hp, 4.0 hp, 5.0 hp, 6.0 hp, 7.5 hp, m 1056 - pressure guage providing fabricating, testing and commisioning pressure vessel fabricating in m.s plate on providing foundation including epoxy paint, pressure gauge (100 mm dia), pressure gauge (150 mm dia), vacuum / combination gauge, m 1057 - lifting equipment chain pulley block supplying triple spur gear type chain pulley block suitable for capacity as below with 3 m lift complete with load chain and hand chain suitable for above lift, tested to 50% over load as per is 3832 carrying isi mark., 1 tonne capacity, 2 tonne capacity, 3 tonne capacity, electric operated circular or rectangular travelling crane (single girder) supplying single girder electrically operated rectangular over head travelling crane with 6 m lift complete with wire rope hoist, class ii duty, all three motions electrically operated by suitable rating motor ip 54, control panel and down pendant control block., 5 tonne capacity, above 6 m up to 8 m span, above 8 m up to 10 m span, 7.5 tonne capacity, above 6 m upto 8 m span, above 8 m up to 10 m span, 10 tonne capacity, above 6 m up to 8 m span, above 8 m up to 10 m span, m 1058 - lightening arrester, ab switch, insulators, lightening arrestor supplying, erecting approved make thyrite type lightening arrestor suitable for h.t. supply with necessary ancillary material complete on provided cross arm and connected to overhead line., suitable for 11 kv supply, distribution class, suitable for 22 kv supply, distribution class, suitable for 33 kv supply, station class, disc insulator. supplying, erecting porcelain disc type insulators with hardware fittings suitable for h.t. overhead line complete erected with nuts and bolts on provided cross arm, suitable for 11kv line, suitable for 33kv line, pin insulator supplying, erecting porcelain pin type insulators with hardware fittings suitable for h.t. overhead line complete erected with nuts and bolts on provided cross arm, suitable for 11kv line, suitable for 33kv line, air break switch without earth switch supplying, erecting approved make h.t. outdoor type gang operated air break triple pole switch of required capacity with 3 post / pin type insulator per phase , mounted in horizontal or vertical position on provided cross arm with adequate length of g.i. pipe for operating handle erected on extended square shaft. the operating handle provided with lock and key at suitable height from ground with necessary clamps, suitable for 11kv line, rocking / tilting type, rotating type, suitable for 33kv line, rocking / tilting type, rotating type, air break switch with earth switch supplying, erecting approved make h.t. outdoor type gang operated air break triple pole switch with earth switch of required capacity with 3 post / pin type insulator per phase , mounted in horizontal or vertical position on provided cross arm with adequate length of g.i. pipe for op
Tender For supply of fire equipments for mc buldana - items, selectable flow nozzle, foam branch fb5x type:, short branch pipe gm 63 mm male inlet, rrl delivery hoses, type b,(isi-636) 63 mm dia x 15 m with copper winding gun metal/ss couplings of 63 mm couplings, rrl delivery hoses, type b,(isi-636) 38 mm dia x 15 m with copper winding gun metal/ss couplings of 63 mm couplings, b.a. sets, breathing air compressor, fire proximity suit jacket & trouser, ceiling fire hook, fireman axe, bolt cutter extra large, bolt cutter large, hook ladder for fire fighting purpose, crow bar, pick axe wooden handle, sledge hammer 6.5 kg, ropes terylene nylon 1" (30 meters each), metal hooks for water search use, drag hook heavy duty, circular saw metal cutter machine electrical base, chain saw wooden cutter machine patrol base, diamond chain saw concrete cutter machine petrol base, uniforms for firefighter, officers uniform, afff 6% concentration 20 kg jerry can, rain coat best quality, fire extinguisher 6 kg abc type is 2190:2010, co2 fire extinguisher 4 kg is2190:2010, life jacket irs approved, life buoy irs approved with 30m rope, portable pump with 275 lpm, portable folding aluminum telescopic ladder 14 ft extended height, hydraulic combi tool, hydraulic power pack, hydraulic hand pump, hydraulic jack, blower and exhauster
Tender For providing and laying 24mm dia wire rope 6x36 fiber core including applying of cardium compound winding on drums to lift 40t spillway gate no 1 3 5 of opa barrage at opa khandepar in ponda taluka.
Tender For supply of electric samagri for f.y. 2026-27 -multi-wire copper 1 mm (actual size) | multi-wire copper 1.5 mm (actual size) | multi-wire copper 2 mm (actual size) | multi-wire copper 2.5 mm (actual size) | aluminum single-core wire 10 mm actual size aluminum cable (2-core, 10 sq. mm), aluminum cable (4-core, 10 sq. mm), armored aluminum cable (4-core, 10 sq. mm), standard incandescent bulb (40 watt), standard bulb holder, bulb holder (24 watt), led bulb (11 watt), led bulb (15 watt), led bulb (40 watt), led bulb (50 watt), led street light set (60 watt), led street light repair kit (driver & plate - 60 watt), led street light set (72 watt), led street light repair kit (driver & plate - 72 watt), led street light set (90 watt), led street light repair kit (driver & plate - 90 watt), led street light set (120 watt), led street light repair kit (driver & plate - 120 watt), led street light set (135 watt), led street light repair kit (driver & plate - 135 watt), led street light set (150 watt), led street light repair kit (driver & plate - 150 watt), led field light set (120 watt), led field light set (150 watt), led field light set (250 watt), led field light set (400 watt), cfl tube light rod (24 watt), cfl tube light rod (36 watt, 4-pin), tube light bracket (1-unit, including nuts & bolts), sodium lamp bracket (1-unit, including nuts & bolts), acrylic cover (2x36 watt), acrylic cover (96 watt), fixture set. 4-pin holder (24w/36w, heavy-duty), porcelain holder (85w, heavy-duty), electronic choke (24w), electronic choke (36w), pvc tape, taparia pliers, taparia screwdriver, taparia voltage tester, branded safety gloves, allen key set (sizes 1 to 25), t-handle wrench set (sizes 1 to 50), tricolor rope light (15m), waterfall string lights (10ft), led street light (30w), led street light (45w), led bulb (9w), led bulb (6w), led bulb (20w), led street light repair components (30w/45w), mcb (6a, 12a, 20a, 25a, 32a), mcb box (6-way), mcb box (8-way), mcb box (10-way), mcb box (12-way), led tube light (24w), single-core copper wire (12mm), single-core copper wire (14mm), multi-core copper wire (4mm), multi-core aluminum wire (6mm), multi-core aluminum wire (8mm), ceiling fan (copper winding - bajaj/havells), ceiling fan (aluminum winding), multi-core aluminum wire (1.5mm - actual size), multi-core aluminum wire (2mm - actual size), multi-core aluminum wire (2.5mm - actual size), open-end spanner set (sizes 1 to 50), rechargeable led bulb (9w), rechargeable led bulb (6w), rechargeable led bulb (20w).