Latest thermal power station Tenders | Government thermal power station Tenders

Central Government/Public Sector

CTN :45341832

04 Jun, 2026 NA

Barh - Bihar

Tender For procurement of hrh hydraulic safety relief valve of st i boiler, barh super thermal power station

Central Government And Public Sector

CTN :45329147

20 Jun, 2026 NA

Palakkad - Kerala

Tender For collection and transportation of dry fly ash from neyveli lignite corporation india limited cuddalore district / ntpl thermal power station tuticorin, tamil nadu to malabar cements limited walayar / cgu, cherthala, kerala state

State Government

CTN :45345322

11 Jun, 2026 NA

Multi City - Telangana

Tender For tggenco-ytps- supply of toilet cleaning consumables for various locations of (5x800mw) yadadri thermal power station.

State Government

CTN :45328535

08 Jun, 2026 3.50 Crore

Hyderabad - Telangana

Tender For procurement of 1000 mt sulphuric acid (technical grade as per is: 266-2024) for various thermal power stations of tggenco.

CTN :45332914

05 Jun, 2026 NA

Darjeeling - West Bengal

Tender For supply of store for igloo - cement opc 43 grade , coarse sand river oblique m sand , graded stone aggregate 20mm , graded stone aggregate 40mm , pcc solid block of size 400 x 400 x 200mm 75 kg per cm2 , tmt steel 25mm grade fe 500 , tmt steel 16mm grade fe 500 , tmt steel 12mm grade fe 500 , binding wire 18 gauge , oil bound distemper , primer , polythene membrane sheet of grade 2504 thickness 150 micron , water proofing compound in 1 kg packing , blast door 3000 x 2800 as per elevation including all fitting and fixtures , ventilator 600mm dia with mesh , non sparking gritless flooring moc , explosion proof ip66 lighting and fittings , lightning protection system cu strip oblique finial , 16 sqmm 2 core lt ug xlpe cable 200rm and point wiring with 4 nos flame proof lights , transparent pipe 5mm dia bore for water leveling best quality , iron bar 600mmx16mm to bend 12mm and 10mm tmt bar , industrial safety helmet , hammer weight 500 gms with wooden handle , plaster trowel with wooden handle , fish line best quality , plumb bob iron best quality , galvanised iron pan mortar tasla 18 gauge 16 inch dia minimum weight of 1 kg , rammer earth with handle min wt 5 kg without handle , picks axes with chiesel and point ends kudali 14 cp nominal wt 3 kg overall length min 595mm with handle , showel square nose 14 gauge tata high carbon steel blade size 310 x 245mm shaft size 710mm fitted with strong steel crutched wooden handles , painting brush 100 mm best quality , synthetic tarpaulin 550 gsm of size 30ft x 30ft colour green , multipurpose non slip rubber reusable gloves for scrubbing cleaning brick work etc colour olive green oblique black , brick trowel steel 305 mm , heavy duty openable props oblique scaffolding made of ms pipe of 60 and 48mm dia outer pipe od 60mm and inner pipe od 48mm of 3mm all as per brief technical specification , ms centering plates of size 90cm x 60cm of thickness 14 guage with two stiffeners including all necessary jointing arrangement nut bolt and jointing cleats as per tech specs , portable ms body needle vibrator machine with power 3 hp to 5 hp weight 20 to 30 kg petrol engine with min frequency 50 hz voltage 200 to 300 for concrete vibrating as per tech specs

CTN :45326589

09 Jun, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of equipment items - dc motor:type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder: bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel supply: mounted on training base suitable for dismantling and inspection, hydraulic operated directional control valves (dcv):type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study, bearing with shaft assembly :type: dismantling and assembly teaching unit shaft diameter: 30 mm shaft material: en8 steel bearings: deep groove ball bearing (6205 / 6206) housing: cast iron locking arrangement: circlips lock nuts end covers mounting: bench-mounted / frame-mounted unit, coupling unit using driving and driven shafts using plummer block bearing unit :the plummer block housing material: cast iron (grade fg 200 or equivalent). type: sng or snl series (split-type housing). sealing: felt seals or v-ring seals (to demonstrate lubrication retention). lubrication: provided with a grease nipple at the top center for manual lubrication practice. the bearing type: self-aligning ball bearing (1200 series) or spherical roller bearing (22200 series). bore diameter: standard 25mm or 30 mm. shafting and coupling shaft material: ground carbon steel (en8 or en9) for high surface finish. coupling type: flexible coupling: to demonstrate the bearings ability to handle slight misalignment. rigid flange coupling: to demonstrate traditional direct connection. driving/driven setup: one shaft connected to a small electric motor (driving) and the other to a brake drum or load (driven).

CTN :45328819

09 Jun, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For equipment items - dual output regulated dc variable power supply-input voltage : 230v/50 hz ac.output voltage : (0-30)v dc.output current : (0-2)a.dcprotection circuit : over voltage, over current and short circuit protection.high efficiency : greater than 85 %.low ripple and noise less than 50 mv.digital display, digital ic trainer kit with breadboard:+5v dc, 1 a regulated power supply. 12v dc / 15v dc, 200 ma regulated power supply.solderless breadboard with minimum 840 tie- points, power distribution buses.zif(zero insertion force)ic sockets to accommodated 8 or 16 pin ics.logic input and output leds for output monitoring.16 buffered led outputs.16 debounced switch inputsvariable clock generator: 0.5 hz to 50 hz.single pulse output : 100 ms(buffered,positive and negative outputs).one seven-segment display with 4 bcd inputs.built-in logic switches.manual clock: debounced push-button(one pulse per press)., digital storage oscilloscope-bandwidth: 50-100 mhz. sampling rate: 1gs/sec.channels: 2 (minimum). power supply: 100v 240v ac, 50-60 hz automatic measurement: vpp, vavg,rms, frequency, period, vmax, vmin, rise time, fall time, + width, - width, +duty, - duty etc., horizontal scale: 5 ns/div 50 s/div or equivalent vertical resolution: 8 bits (2 channels simultaneously) vertical sensitivity: 1 mv/div 10 v/div (at input) waveform math: +, -, x , , invert, fft etc., waveform storage: 16 waveforms or equivalentcommunication interface: usb host, usb interface. c 7-inch color display or equivalent input impedance - 1 m 2%, // 20 pf accessories:2 xpassive probes (1x/10x), pcb prototype machine :manual software : copper cam & mach3 mill.resolution (x/y) : 3.125 micrometre.working area(x/y/z) : 200 x 300 x 120 mm.minimum width line and space : 0.1 mm (4 mil).maximum travel speed : 58 mm/sec(2.28 ).drilling range: 0.2 3.175 mm(8-125 mil).maximum drilling cycles : 50 cycles/minmain axle power rating : 300w.main axle rotating speed : 25000 rpm.maximum working speed : 3500 mm/min.feeding height: 120 mm.working drive : 0.02 0.05 mm.repositioning accuracy : 0.01 0.02 mm.supported formats : standard gerber, dxf, excellon.capability of processing various materials:fr4, copper clad, acrylic, metal, aluminium etc.power supply : 230v ac

CTN :45326580

09 Jun, 2026 NA

Madurai - Tamil Nadu

Tender For purchase of instrumentation and control engineering practices (equipment) - motorized control valve trainer kit signal input:4 20 ma or 0 5 v valve characteristic:equal percentage stem movement:maximum 10 mm or 12 mm body material:cast iron trim material:ss 316 trim size: cv value:2 or 5 actuator:servo motor supply voltage:230 v ac, 50 hz connection: flanged or screwed type. digital indicator provided potentiometer provided for varying the 4 20 ma input signal, saybolt viscometer apparatus glass type: high-quality borosilicate glass tube. control type: manual energy regulator control. shape: rectangular bath with cylindrical test chamber. temperature range: ambient to 240 c oil bath temperature. humidity: up to 80% rh (non-condensing). power supply: 230 v ac, 50 hz. measuring range: 32 to 1000 sus(saybolt universal seconds). accuracy: as per astm d-88( 0.2 seconds). mounting type:benchtop. capacity:one cup(approximately 60 ml). control mode:manual operation. port size:standard orifice sizeas per astm d-88. features:oil bath with heater,thermoregulator,insulated outer body,orifice,receiver flask, control valve trainer kit three pneumatic control valves provided with individual hand valves valve characteristics: i) quick opening ii) linear iii) equal percentage. valves connected in parallel configuration for comparative study. pneumatic operation with air supply connection. control valve assembly mounted on trainer panel. power supply: 230 v ac, 50 hz., water level measurement trainer kit using capacitive type transducer tabletop model with transparent acrylic tank of approximately 50 cm height. capacitive type level sensor for continuous level measurement. sensor output: (4 20)ma and/or (0 5)v with built-in signal conditioning. vertical pump for water circulation from sump to tank. flow control valve, overflow, and drainage arrangement. digital display for water level indication in cm. power supply: 230 v ac, 50 hz, single phase. in-built regulated dc power supply for sensor and control circuit. mounted on powder-coated ms frame for laboratory use. suitable for calibration and study of capacitive level measurement.

CTN :45326585

10 Jun, 2026 NA

Krishnagiri - Tamil Nadu

Tender For purchase of physics laboratory equipments - physics laboratory equipments, travelling microscope (item code: a002)specifications:travelling microscope (dollar)-1292 college grade, comprising 17cm & 15 cm stainless stell scales, vernier reading to 0.01 mm , provided with superb optical combination & superior fittings with heavy base, nicely finished in mettalic gray & black contrast housed in 12mm thick beautiful strong cabinet with sumnica door.with high glass ramsden eye piece with cross line graticule for better performane and durability, plancks constant apparatus (pico) [item code: a005]specifications:photo sensitive device: vacuum photo tube light source: halogen tungsten lamp 12v/35w colour filters: 635nm, 570nm, 540nm, 500nm & 460nm.accelerating voltage: regulated voltage power supply output: (+/ -)5v continuously variable through multi -turn pot display: 3 digit 7-segment led current detecting unit: high stability low current measuring instrument display: 3 1/2 digit 7-segment led power requirement: 220v (+-) 10%, 50hz optical bench. scale length is 400 mm., torsional pendulum setup [item code: a010]specifications:material - chrome plated brass disk diameter- 100-150mm wire material- phosphor bronze wire length - 500mm stand height - 500-700mm usage -demonstrates torsional oscillations and studies rotational inertia. weight - 1-2kg features- simple design, precise measurement, durable material, easy setup, educational tool fob port - ambala, compact disc laser setup[item code: a011]specifications:wavelength: 635nm - 680 nm (visible red), output power: 1mw - 5mw includes: diode laser source on a sturdy stand, optical bench, slits, diffraction grating, and power supply

CTN :45308681

15 Jun, 2026 NA

Srinagar - Jammu And Kashmir

Tender For stage/rate contract for supply of key material/equipments required for operation/maintenance of 33kv lines and 33/11-6.6 kv receiving stations valid for the financial year 2026-27 or till finalization of next stage contract - power transformers, supply of transformer oil as per is: 335-1993 with latest amendments thereof, supply of buchhloz relay for 33/11-6.6 -6.6 kv transformer protection (10mva / 6.3 mva/ 5mva) as per is 3637:1966, supply of winding temperature indicator (wti) for 33/11-6.6 kv power transformer (10 mva / 6.3/ 5 mva ) as per relevant is 5561 standard., supply of oil temperature indicator (oti) for 33/11-6.6 kv for power transformer (10 mva / 6.3/ 5 mva )as per relevant is 5561 standard., supply of cork sheet 6 mm as per relevant is 5561 standard., supply of old sarees/dhoti cloth, supply of gaskets suitable for power transfomers, 33kv ct&pt, supply of 33/11-6.6kv power transformer (10/6.3/5 mva)bush rods with copper washers as per relevant is 3347 standard., hv side, lv side, supply of 33/11-6.6kv power transformer (10/6.3/5 mva)bushes as per relevant is 3347 standard., hv side, lv side, supply of 11 kv spout bushes (indoor type) conforming to relevant standards ammended up to date, supply of mechanical plunger (conforming to relevant standards ammended up to date ) for, 11 kv breakers (both incoming & outgoing), 33 kv vcbs both indoor & outdoor type, supply of 11 kv partition insulators/ bushes with inbuilt studs of required size conforming to relevant standards ammended up to date as per directions of site engineer, supply of dc connector for 11 kv panels conforming to relevant standards ammended up to date, supply of breather conforming to latest is 3202 (ammended up to date) for 10mva/ 6.3mva/ 5/ 3.15 mva., supply of silica gel as per is :3202, supply of o-ring oil sealing of sizes for power transformer bushes (hv/lv) as per is 3202., supply of galvanised iron angle/channel/flat per is :2062 grade "a" of sorts and sizes, g i channel 100x50x50x6 mm, g i channel 75x40x40x6 mm, g.i angle iron 65x65x6 mm, g.i angle iron 50x50x6 mm, g.i flat iron 40x6/ 50x6 mm, supply of arching horns (set of three pieces) for power transformer, supply of g.i bolt full thread of sorts and sizes with washers and nuts of different sorts and sizes, supply of 33kv current transformer (3-core) of reputed make,outdoor oil cooled, single phase (comprising of 3 no.) (as per is 2705 -1992 having ratio of is (is 2165, is 2705(i-iv), is 2099, is 5621, is 2071, is 335, is 13947(part i), iec 185,iec 270, iec 44(4), iec 171, iec 60, iec 8263, iec 815, indian electricity rules 2010), 400-200/5-5-5 a, 300-150/5-5-5 a, 250-125/5-5-5 a, 200-100/5-5-5 a, supply of 11 kv c.t.(2-core/3-core) of reputed make suitable for 11kv vcb panels (comprising of 3 no.) as per is (is 2165, is 2705(i-iv), is 2099, is 5621, is 2071, is 335, is 13947(part i), iec 185,iec 270, iec 44(4), iec 171, iec 60, iec 8263, iec 815, indian electricity rules 2003) having ratio:-, 800-400-200/5-5a, 750-375-187.5/5-5a, 600-300-150/5-5a, 400-200-100/5-5a, 200-100/5-5a, 150-75/5-5a, 100-50/5-5a, 50-25/ 5-5a, 33kv and 11kv outdoor type potential transformer, supply of 33kv potential transformer (comprising of 3 no.) of ratio 33kv/ 3 / 110v / 3 ,single phase,outdoor oil cooled, dead tank type pt as per is:3156 -1992, supply of 11kv potential transformer 11kv/ 3 / 110v / 3 three phase box type (combo unit) as per is :3156-1992, supply of 11kv potential transformer (comprising of 3 no.) 11kv/ 3 / 110v / 3 single phase seperate type as per is :3156-1992, 11kv and 33kv vcbs, supply of master trip relay 24-50 v rel 615 abb ied suitable for 11kv vcb switch gear panels (compitable for electric feild, pascal, scheinder, abb, essan l&t or any other equilant make), supply of digital protection relay adr 141c, rel 615 /abb ied,model no. er113 2 o/c + 1 e/f with high trip (mit113), auxiliary voltage = 0-36 volt conforming to iso 9001:2008 standards (compitable for electric fe

Thermal Power Station Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government And Public Sector

State Government

State Government