Latest thermal shock chamber Tenders | Government thermal shock chamber Tenders

CTN :45688413

07 Jul, 2026 NA

Ambala - Haryana

Tender For dynamic balancing of c/f machine basket, distributor at your workshop., vibration measurement, analysis and dynamic balancing at site.

CTN :45666967

04 Jul, 2026 NA

Krishnagiri - Tamil Nadu

Tender For purchase of civil lab equipments - equipments for lab, direct shear machine:standard compliance:the equipment shall conform to bureau of indian standards is 2720 (part 13) and equivalent astm international astm d3080.technical specifications:shear box size:60 mm 60 mm 25 mm specimen size (complete with grid plates, porous stones, and specimen cutter).normal load capacity:minimum 5 kn with loading yoke and calibrated loading hanger set.shear load capacity:minimum 2.5 kn or 5 kn with calibrated proving ring (with calibration certificate).rate of strain (shear displacement):variable speed drive with controlled displacement ranging from 0.01 mm/min to 1.25 mm/min (motorised model preferred for uniform rate control).displacement measurement:horizontal displacement dial gauge: 0.01 mm least countvertical displacement dial gauge: 0.002 mm or 0.01 mm least countloading frame:rigid, heavy-duty loading frame with corrosion-resistant finish.drive system:motorised with single phase 220 230 v, 50 hz power supply.accessories (to be supplied complete):shear box assemblyproving ring with calibration charttwo dial gaugesloading weights and hangerporous stones (2 nos.)specimen cuttertool kit, auger boring (or) any boring -soil sampling apparatus: engine type: 4-stroke, air-cooled, single-cylinder petrol engine displacement: 196 cc power output: minimum 6.5 7 hp ( 3.5 kw) maximum engine speed: ~3600 4000 rpm starting system: recoil (manual) start fuel type: pure petrol fuel tank capacity: minimum 1.5 1.6 l supported auger bit sizes: 4 , 6 , 8 , 10 , 12 , 14 (100 350 mm) bit material: heavy-duty mild steel with powder coating typical drilling depth: minimum 3.5 4 ft per bit (800 mm 1.2 m) bit coupling: quick-coupling system for easy bit replacements frame: robust tubular steel frame with ergonomic handles and vibration absorbers weight: minimum 20 22 kg (without auger bit), flow table test apparatus: dimensions and specifications as per is 9103, table top made from flat metal plate ,minimum thickness 1.5 mm, table top size:700 mm*700 mm ,with flatness tolerance of 1.5 mm.table top marked with: scribed cross at centre,lines parallel to table edges and central circle of 200 mm diameter underside of table top reinforced to prevent distortion. total mass of table top:16+_ 1kg table top base frame front and upper stops provided as per is 9103. lower front edge fitted with two rigid stops to transfer load directly to base frame. base frame designed to transfer impact load directly to supporting surface. minimizing bounce stop watch-digital -2 nos scale 1 mtr-2 nos mounting wooden platform 300 mm height amc for 3 years inclusive., drying oven:temperature range: ambient (room) up to 250 temperature control: digital pid controller / thermostat for accurate heating. prestogroupaccuracy: typically 1 2 c. chamber material: stainless steel inner chamber for durability and easy cleaning. air circulation: forced convection fan for uniform temperature. shelves: usually 2 3 adjustable shelves. power supply: single phase 220 230 v ac, 50 hz.

CTN :45545867

05 Aug, 2026 NA

Kharagpur - West Bengal

Tender For supply of machine condition analyzer for detecting condition of rotating machines & bearings through measurement of vibration as per annexure. it shall be portable and hand held. make shall be m/s. skf model no. cmas-100 sl with charger manual or m/s. uni-t model ut-312 or item to be procured from oem or its authorized dealer alongwith authorization certificate. firm to submit dealership certificate. make: skf / uni-t / any reputed make (firm those who have credential for the same or equivalent item). [ warranty period: 30 months after the date of delivery ] ]

Corporations And Associations And Others

CTN :45328794

11 Jun, 2026 19.95 Lacs

Delhi - Delhi

Tender For corrigendum : providing t and p items and garden tools for ward no. 171 (cr park) south zone - providing t & p items and garden tools for ward no. 171 (cr park) south zone., supply of telescopic pole pruner:-specification:-pole length including blade: 6.5mblade material: hardened & tempered high carbon steel. the head of the blade shall have a hooked tip useful for cutting twigssaw blade shape: hooked type curved sawblade type & no of cutting teeth: tripple grounded 86 teeth blade length: 15"-16"pole type: light weight telescopic tubular aluminum alloy extendable poleno of positions for pole heightadjustment: 10 positionslocking mechanism: ergonomicvally designed two way locking mechanismtotal working length: max 219"(6623 mm), mln 103" (3103mm) branch cuttingcapacity: 200mm max, petrol operated brush cutterengine: single cylinder, 2 stroke, aircooled onlyengine displacement: 40.2ccpower output: 2kw/2.7hpmax output shaft speed at cuttingattachment: should be minimum 9000 rpmcarburetor: diaphragm with compensator technology.fuel tank capacity: minimum 600 ml.weight(dry, without cutting attachment & deflector): should not be more than 7.5 kgclutch: centrifugal type, clutch shoe support base & lining metal only.multi function handle: should have acceleration, on/off switch at right handle.brushcutter harness: should be double shoulder harness only.anti vibration system: must have 4- point aniti vibration system.vibration level in m/s2 at right handle: should not be more than 2.5 m/s2sound pressure level db(a): should not be more than 105 db(a)drive shaft design: must have drive shaft ends square design type only.certification: must have valid en certification, telescopic petrol operatedpole prunerengine: single cylinder, 2 stroke, air cooled onlydisplacement: should be between 25-30 ccpower output: should be minimum 1.2 hpweight (dry without cutting attachment & fuel): should not be more than 7.5 kgfuel tank capacity (ml): should be minimum 400mlchain oil capacity (ml): must have minimum 200 ml.clutch: clutch shoe linining should be metal only.guide bar length: minimum 30cmguide bar and chain: should have same manufacture onlychain type: every drive link need groove & small oil holes for better lubrication. saw chain pitch should be 1/4" or 3/8picco only and drive link thickness must have 1.1 mm or 1,3 mm.max. output shaft speed (rpm): should be minimum 8000 rpm at chain sprocket.equipment total length with guide bar and chain (cm): should be minimum 220 cm - compressed & total length of equipment -minimum 350 cm - extended.sound pressure level (db/a): should not be more than 95 db(a)vibration measurement m/s2 at control handle extended position: should not be more than 5.5 m/s2certification: must have tuv certification with test standard en iso 11680, supply of lawn mower:-specification:- type of machine walk behind lawn mowers power sourcepetrol engine engine displacement 224ccstart type recoil / pull startspeed control variable speeddrive type all wheel driveblade style rotary typeblade engagement electromagneticcut width (mm) 525 to 549minimum cut height 20 millimetermaximum cut height 80 millimeterblades hardened steelnumber of blades 1number of positions for cut height adjustment 6number of levers for cut heightadjustment: single levernumber of wheels 4front wheel size 203 millimeterrear wheel size 250 millimeterwheel tyres pneumaticif yes, grass catcher / collector / bag volume 70 liter"engine power rating (watt)" 4000 to 4999engine fuel tank capacity 1.4 ltr., supply of synthetic enamel paint in all shades as per required and direction of officer-in-charge., petrol operated chain sawengine : single cylinder, 2stroke, aircooled onlydisplacement: 45.4cc poweroutput: 2.3kw. 3.0 hpmax. engine speed (with guide bar & chain): at least 12500 rpmcarburetor: diaphragm type compensator technology.fuel tank capacity: should be minimum 450 ml.dry weight(without cutting attachment):should not be mor

CTN :45207453

23 Jun, 2026 NA

Multi City - Multi State

Tender For corrigendum : non-comprehensive amsc for temperature test chambers, humidity chambers and thermal shock chambers

CTN :45233524

03 Jun, 2026 NA

Bangalore - Karnataka

Tender For non-comprehensive amsc for temperature test chambers, humidity chambers and thermal shock chambers

Central Government/Public Sector

CTN :45238466

08 Jun, 2026 NA

Sultanpur - Uttar Pradesh

Tender For supply of thermal shock chamber

CTN :44925020

07 May, 2026 NA

Agra - Uttar Pradesh

Tender For corrigendum : providing of custom bid for services - upgradation of thermal shock chamber and temperature, humidity & altitude chamber

CTN :45011051

08 May, 2026 NA

Hyderabad - Telangana

Tender For providing of customized amc/cmc for pre-owned products - comprehensive annual maintenance contract of zetatek make chambers for mobile thermal chamber and thermal shock chamber; zetatek; annual maintenance contract (amc); quarterly; no

CTN :44992623

15 May, 2026 NA

Pune - Maharashtra

Tender For providing of customized amc/cmc for pre-owned products - camc of thermal enviroment test chamber and thermal shock chamber; biotechnologies inc; comprehensive maintenance contract (cmc); quarterly; yes

Thermal Shock Chamber Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Corporations And Associations And Others

Central Government/Public Sector