Latest thermal cutter Tenders | Government thermal cutter Tenders

CTN :45054074

08 May, 2026 NA

Bhavnagar - Gujarat

Tender For tender for rcc pipe , paver block , solar street light , pvc and gi pipes , cc and rcc material , cement , tree cutting , murrum , bore cable starter , submersible motor pump , labor work

corporations/Associations/Others

CTN :45033657

20 May, 2026 35.17 Lacs

Jhansi - Uttar Pradesh

Tender For providing of m & r of 2x110 mw and 2x210 mw ash dykes at ptpp, parichha. - carriage of cmr/ash by mechanical transport including loading, unloading and stacking upto 5 km distance from power house area to ash ponds at ptpp parichha. payment to be made after deducting voids as per cpwd specfication or as decided by engineer in charge. , earth/ash work in excavation in earth over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m; disposed earth to be levelled and neatly dressed , placing of precast rcc planks in decantation well including its carrige and putting it into slott including all labour t&p etc. required for proper completion of work. , providing and laying empty cement plastic bags filling the same with ash having capacity of 50kg and stiching the same with sutali, laying with ash pond area as per instruction of engineer incharge. , engaging jcb/hydra machine on hire bases including hire fuel driver helper etc. complete. , dry stone pitching 22.5/30 cm thick including supply of stones and preparing surface filling from fly ash with watering & compection complete including carriage from coal handling area.(boulder free of cost from chd area in plant) , spreading of cmr/ash/earth by opening of stack including dressing watering compaction/ramming etc. complete for proper completion of work as per direction of engineer in charge of the work. payment to be made on compacted quantity. , clearing jungle including uprooting of rank vegetation, grass, brush wood,trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared , brick work with fly ash bricks f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in: cement mortar 1:6 (1 cement : 6 coarse sand) , cement plaster (in fine sand) 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , formation of dyke/ roads using approved materials including the preparation of borrow area,stripping, watering of borrow area, excavation of approved quality of material from borrow area,using poclains or any other mechanical means,loading, unloading, transporting by dumpers,trucks etc., surface watering / dewatering,lowering of water level to at least 0.5 m belowthe bottom of the working level, includingconstruction of cofferdams wherever required,depositing the fill material on the dyke,spreading by dozers or grader in layers notexceeding 30 cm in compacted thickness forforming the embankment with all leads, lifts,breaking clods, watering, compaction with min. 10tone capacity vibratory rollers or pneumatictyred rollers to achieve a dry density not lessthan 95% of maximum dry density (standardproctor) forming extra width on edges, trimmingof slopes and slope compaction with dozers orslope compactors to obtain the section as perconstruction drawings, with all incidental charges, cost of labour, equipment, materialsetc. complete as per specifications, drawings and as directed by the engineer. with ash available from inside ash dyke area , structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. , same as above item but steel shall be issued by department free of cost ( steel issued by department) , steel reinforcement for r.c.c. work including straightening, cutting, bendin g, placing in position and binding all complete for thermo-mechanically treated bars

corporations/Associations/Others

CTN :45034145

20 May, 2026 43.16 Lacs

Jhansi - Uttar Pradesh

Tender For providing of construction of drain for 2x210 mw ash water recirculation system at ptpp, parichha. - engaging jcb on hire bases including hire fuel driver helper etc. complete. , clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. , demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of material within 50 metres lead as per direction of engineer-in-charge in lime mortar , earth work in excavation by mechanical means (hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming ofbottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. , filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. , providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering - all work up to plinth level : 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level :1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) , "centering and shuttering including strutting, propping etc. and removal of form for : suspended floors, roofs, landings, balconies and access platform" , steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.thermo-mechanically treated bars , random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : cement mortar 1:6 (1 cement : 6 coarse sand) , brick work with fly ash (non modular) bricks of class designation 7.5 in foundation and plinth incement mortar 1:6 (1 cement : 6 coarse sand) , 12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) , supplying and filling in plinth with jamuna sand under floors, including watering, ramming, consolidating and dressing complete. , "hire charges of pump set of capacity 4000 litres/hour for dewatering which include cost of services of operating staff, cost of lubricating oil, diesel / petrol/ kerosene oil , other consumables for running the plant and machinery. the hire charges of plant machinery on per day basis are for single shift of eight working hours." , providing and laying non pressure np-4 class (heavy duty) r.c.c. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete 900 mm dia rcc pipes.

corporations/Associations/Others

CTN :45021663

05 May, 2026 NA

Valsad - Gujarat

Tender For annual rate tender for purchase of materials of construction / road resurfacing for year 2026-27 - brick, sand, kapchi 25 to 40 mm, grit 6 to 10 mm, handmade metal 40 to 63 mm, rubble 9 inch, cement (53 grade) 50kg, tor steel, 60 mm rubber rise, m40 paver block, 80 mm rubber rise, m40 paver block, g.s.b., dust (powder), brick masonry (1:6), stone masonry (1:6), plaster (1:4), r.c.c. slab filling 1:2:4, (to give the price of steel separately in kg), r.c.c. slab filling 1:1/2:3 (to give the price of steel separately in kg), p.c.c. (1:3:6), p.c.c. (1:4:8), pointing (1:2), yellow soil, hard murrum, handmade metal, np3 pipe 300mm, np3 pipe 450mm, np3 pipe 600mm, np3 pipe 900mm, np3 pipe 1200mm, j.c.b machine (including diesel driver), roller (including diesel driver), truck (including diesel driver), hydraulic center trailer (including diesel driver), semi dense carpet patch work on various roads in pardi municipal area, building materials and soil lifting work from pardi municipal area, compounding of tarkhuta in pardi municipal area (excavation including five wire, cross wire, cement pole), waterproofing, two coat putty or two coat of primer (including brushing), wall painting (three coat) with plastic emulsion paint, ceiling painting (three coat) with plastic emulsion paint, outer wall painting (three coat) with weather proof acrylic emulsion paint including priming coat, box cutting the road surface to proper slope and camber for making a base for the road work including removing the excavated stuff and depositing on the road side slope as directed upto 50 mt lead., scarifying gravelled macadam or bitumen macadam surface 6 cm to 10 cm depth including stacking useful materials on road side and disposing off remaining stuff, construction of granular sub-base by providing well-graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix-in place method with rotavator at omc and compacting smooth wheel roller to achieve the desired density, complete in two layers as per technical specification clause 401., providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density in two layer. by mechanical means with 1 km lead, providing and laying bituminous base course 75 mm thick compacted in two layers with tack coat of asphalt (vg-30) 80/100 at the rate of 2.5 kg/10 sqmt and using b.t. stone aggregates of required gradation and asphalt 80/100 grade for mixing @ 1.99% by weight of total mix including heating the aggregate and asphalt by drum mix plant and spreading the same by paver finisher and consolidation with vibratory roller including providing all materials, equipment’s, tools and plants, oil, kerosene, fire wood, labour charges etc. complete., providing and laying 50mm thick compacted b.m. with b.t. aggregate as per mort&h specification and asphalt grade (vg-30) 80/100 for tack coat at 2.5 kg/10 sqmt with mechanical sprayer and bitumen grade 80/100 for mixing at the rate 34.0 kg/m.t. i.e. 3.4% of total mix including heating the aggregate and asphalt by drum mix plant and spreading the same by paver censor finisher and consolidation with vibratory roller including providing all materials, equipments, tools and plants, oil, kerosene, fire wood, labour charges etc. complete., providing and laying 25 mm thick compacted semi dense bituminuous concrete using stone chips as per mort&h gradation and asphalt grade (vg-30) 80/100 for tack coat at 2.5 kg/10 sqmt with mechanical sprayer and 80/100 grade asphalt for mixing @ 5.0% by weight of total mix for binder including heating the aggregate and asphalt by drum mix plant and spreading the same by paver finisher and consolidation with vibra

Central Government/Public Sector

CTN :45031536

07 May, 2026 NA

Multi City - Maharashtra

Tender For auction sale of others - scrap rcc water tank¿02 nos consisting of ¿structural steel(ms angle, channel, i beam, rolling shutter, plate, tie plate, gi pipe, tie bar patti, toothed gear wheel, window grill, pipe of hand rail, purlin, truss, gi ladder, plate, window sheet, pgi sheet, down take pipes, valley gutter,m20 hex nuts, )structural rails, reinforcement bar, wooden, gi sheets/pipes, mangalore tiles, , flooring(pcc), brick masonary, stone masonary, rcc/pre cast slab/reinforcement ,etc. remarks : - 1. the delivery will be made on as is where is basis and by lot basis. the items mentioned in the description only will be delivered. 2. lot is approachable by kutcha/pucca road. 3. lot number is exhibited/painted on the structure. 4. the quantity is worked out on approximate basis. 5. the delivery will be made on lot basis and no part delivery will be allowed. 6. materials like electric wires, fittings & cables and other such kind of materials. available in side the building/structure which is not within the scope of lot description, shall be handed over by the purchaser to custodian. 7. the items used in fencing around the structure such as rail, tie bar, jali, stone, bricks, wooden pillar or any other items and similar type of material lying nearby the structure/lot will not be delivered. 8. dismantling& cutting is allowed for easy loading purpose at the risk & cost of the purchaser. dismantling is permitted upto ground level only 9. the purchaser should ensure that during dismantling & cutting operation no nearby structure/building should be affected and take necessary care/safety precautions to avoid any mishap as well as damage to railway property. 10. the purchaser will be fully responsible for his labors if any accident/unusual incident occurs at worksite/place during dismantling. extra precaution to be taken if there are trees near the structure or its branches are spread over the same. 11. after complete removal of rcc/bricks/rubble masonry and rubbish from the site, delivery of other items will be permitted and the land should be cleared of all debris before completion of delivery. 12. purchaser should personally visit the site and the see the lot in regard to loading/lifting. no claim will be entertained after saleof lot. 13. only structural rails will be delivered. other type of rails will not be delivered. 14. lot is ok for sale with above observations. stock holder :- sse( works) igp qty :-1.0 by lot.

Central Government/Public Sector

CTN :45031537

07 May, 2026 NA

Multi City - Maharashtra

Tender For auction sale of others - scrap condemned/abandoned railway quarter- 1. ksra (east)- h2/f1/d2 d 146/147 2. ksra (west)- ma/ 148-150 a& b rb-1/159/1-2,3-4 k туре к/89 k type k/89 rb-1/152/1-8 grand total 38 nos consisting of structural steel(ms angle, channel, i beam, rolling shutter, plate, tie plate, gi pipe, tie bar patti, toothed gear wheel, window grill, pipe of hand rail, purlin, truss, gi ladder, plate, window sheet, pgi sheet, down take pipes, valley gutter, m20 hex nuts,) structural rails, reinforcement bar, wooden, gi sheets/pipes,mangalore tiles,, flooring(pcc), brick masonary, stone masonary, rcc/pre cast slab/reinforcement,etc. remark :-1. the delivery will be made on as is where is basis and by lot basis. the items mentioned in the description only will be delivered. 2. lot is approachable by kutcha/pucca road.3. lot number is exhibited/painted on the structure.4. the quantity is worked out on approximate basis.5. the delivery will be made on lot basis and no part delivery will be allowed.6. materials like electric wires, fittings & cables and other such kind of materials. available inside the building/structure which is not within the scope of lot description, shall be handed over by the purchaser to custodian. 7. the items used in fencing around the structure such as rail, tie bar, jali, stone, bricks, wooden pillar or any other items and similar type of material lying nearby the structure/lot will not be delivered.8. dismantling& cutting is allowed for easy loading purpose at the risk & cost of the purchaser. dismantling is permitted upto ground level only 9. the purchaser should ensure that during dismantling & cutting operation no nearby structure/building should be affected and take necessary care/safety precautions to avoid any mishap as well as damage to railway property. 10. the purchaser will be fully responsible for his labours if any accident/unusual incident occurs at worksite/place during dismantling. extra precaution to be taken if there are trees near the structure or its branches are spread over the same. 11. after complete removal of rcc/bricks/rubble masonry and rubbish from the site, delivery of other items will be permitted and the land should be cleared of all debris before completion of delivery. 12. purchaser should personally visit the site and the see the lot in regard to loading/lifting. no claim will be entertained after sale of lot. 13. only structural rails will be delivered. other type of rails will not be delivered. 14. lot is ok for sale with above observations. stock holder :- sse( work)igp ,qty:- 1.0 by lot

CTN :45000818

07 May, 2026 NA

Bhimtal - Uttarakhand

Tender For repair supply installation and related strengthening work of electrical mechanical equipment - supply and fixing of beta make blower 1618 rpm capacity 403cum, supply and fixing of fine screen manual at inlet section (ms), supply and fixing of dg set 60kva, kirloskar make, supply and fixing of chlorine dosing pump mattito make, supply and fixing of star delta panel l&t make 10hp, supply and fixing of dg change over switch l&t make 400amp 25kva, supply and fixing of panel mcb l&t make 63 amp, supply and fixing of street light havells make 50w, supply and fixing of panels make l&t make 4x6 ft, supply and fixing of pump connection box l&t make 25amp, "supply of tool, grinder, spaner, hammer, wrench, screwdriver, pliers, ladder, hacksaw, mallet, adjustable wrench, showel, pickaxe etx, "supply of safety equipments gloves, mask, helmet, dungarees dress, dettol, soap, sanitizer, phenyl etc, decanting arrangement for both tanks of treated water 200mm ss pipes with pneumatic valves 200mm ms pipes laying, cutting, shifting and welding, pneumatic valve 200mm with automation, 200mm dia hole in both sbr tanks by mechanical means, 200mm dia flange cutting & welding work(with 8 hole with all consumable items), transportation charges, jcb rent for misc work, point blank hand held search light, type- led 30 watt , earthing in stp , installation of aeration grid in rcc tank 6.5m x 6.5m x 6m, wiring in stp room, cleaning of rcc tank & grass cutting etc, supply and fixing of kishor make centrifugal mono block pump set in bronze head 11mtr, discharge 2250 lpm with 10 hp motor 2900 rpm with frame, nut bolts etc., supply and fixing of dg set 25kva, kirloskar make, supply and fixing of star delta panel l&t make 10 hp, "supply and fixing of dg change over switch l&t make 400amp, 25 kva, supply and fixing of panel mcb l&t make 63 amp, supply and fixing of sluice valve jindal make size 100mm dia, supply and fixing of kirpo make chain pulley 01 tonne capacity and 4.5m long chain, supply and fixing of guard pipe jindal make, "supply of tool, grinder, spaner, hammer, wrench, screwdriver, pliers, ladder, hacksaw, mallet, adjustable wrench, showel, pickaxe etc, supply and fixing of street lights havells make 50w, supply and fixing of panels make l&t make size 4x6 ft, "supply of safety equipments gloves, mask, helmet, dungarees dress, dettol, soap, sanitizer, phenyl etc, supply and fixing of kishor make centrifugal mono block pump set in bronze head 11mtr, discharge 2250 lpm with 10 hp motor 2900 rpm with frame, nut bolts etc., supply and fixing of star delta panel l&t make 10 hp, supply and fixing of dg set 25kva, kirloskar make, "supply and fixing of dg change over switch l&t make 400amp, 25 kva, supply and fixing of panel mcb l&t make 63 amp, supply and fixing of kirpo make chain pulley 02 tonne capacity and 4.5m long chain, supply and fixing of guard pipe jindal make, supply and fixing of street lights havells make 50w, supply and fixing of panels make l&t make size 4x6 ft, supply and fixing of pump connection box l&t make 25 amp, "supply of tool, grinder, spaner, hammer, wrench, screwdriver, pliers, ladder, hacksaw, mallet, adjustable wrench, showel, pickaxe etc, "supply of safety equipments gloves, mask, helmet, dungarees dress, dettol, soap, sanitizer, phenyl etc for smooth operation of 1.25 mld stp sps1 and sps2 under bhimtal sewerage scheme

Central Government/Public Sector

CTN :45017789

18 May, 2026 32.15 Lacs

Ernakulam - Kerala

Tender For the work involves upkeeping of existing drains along the side of roads or shops by cleaning of deposits, soil, wastes etc. and disposal, minor repair works, pcc, rcc other civil works, cutting of trees / branches etc. for up-keeping in csl .

corporations/Associations/Others

CTN :44992830

15 May, 2026 6.51 Lacs

Sonbhadra - Uttar Pradesh

Tender For supply of deluge valve of ict and laying of fire hydrant lin c c - laying of ms pipe 100 mm of hydrant system including cutting, and welding etc. and commissioning the line at 6 to 8 kg per cm2 , laying of ms pipe 200 mm of hydrant system including cutting, and welding etc. and commissioning the line at 6 to 8 kg per cm2 , making of ms bend, tee, and reducer including cutting welding work of following size pipes 100 mm dia. , making of ms bend, tee, and reducer including cutting welding work of following size pipes 200 mm dia. , fixing of ms bend, tee, and reducer of following sizes pipe. 100 mm dia. , fixing of ms bend, tee, and reducer of following sizes pipe. 200 mm dia. , fixing of ms flange on the hydrant system, pipe line by cutting , welding and grinding etc. of following dia size. 100mm dia. , fixing of ms flange on the hydrant system pipe line by cutting, welding and grinding etc. of following dia size 200mm dia. , dismantling of ci gate valve of following sizes with the help of nuts and bolts 100 mm dia. , dismantling of ci gate valve of following sizes with the help of nuts and bolts 150mm dia. , fixing of ci gate valve of following sizes with the help of nuts and bolts. 100 mm dia. , fixing of ci gate valve of following sizes with the help of nuts and bolts. 150mm dia. , dismantling of ms,ci,gi pipe line from the hydrant system by loosening of nuts and bolts by cutting and transportation of following sizes. 200mm dia. , fabrication of hydrant valve post of ms pipe dia. 80mm one mtrs. long and welding with ms flange 80mm dia. it should be painted with red oxide and finally with red paint. , fixing of hydrant post of 80mm pipe line of hydrant system with the help of nut and bolts , dismantling of rcc,cc metallic road for taking out the damaged pipe for replacement of pipe and filling the same up to proper level of the earth. , earth work by excavation of ordinary,mixed soil,mixed with bujari, bolders etc. , painting of 200,150 and 100mm dia. , making and fixing of pipe stand for supporting and clamping 150mm dia ms pipe , unloading,shifting,stacking of materials supplied by suppliers and laying in store , replacement of 65,80,100,150 nb size deluge valve or alarm valve of fire fighting system

CTN :44993504

02 May, 2026 2.40 Lacs

Wardha - Maharashtra

Tender For construction of rcc retaining wall at backside, left and right side and external development including 6.00 metre wide cement concrete road around the building, one side drive way 3.60 m wide at front side from porch, front compound wall, ms entrance gate etc. and cutting and dressing of soil / unstable rock behind proposed rcc retaining wall at backside of the laxmibai kelkar girls hostel at mgahv wardha.sh :- carrying out geotechnical investigationsubwork/packages:soil investigation

Thermal Cutter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

corporations/Associations/Others

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others