Latest thermal insulation pad Tenders | Government thermal insulation pad Tenders

State Government

CTN :43061677

12 Dec, 2025 NA

Delhi - Delhi

Tender For strengthening of (e/m) equipments of various tube wells installed at babu park kotla area under kasturba nagar constituency ac-42 . - s/o double flanged g.i pipe of 50 mm dia. medium class each of 3 mtrs long duly threaded on both ends welded and fitted with g.i flange on both ends having the slot for sub cable.make: - tata/jindal, supply of out door type 7.5 to 10hp hut type electrical feeder pillar/metal board of welded construction of size 1370mm x 760mm x 460mmfabricated with 16 swg m.s. sheet with horizontal and vertical intermediate chamber of suitable size onsuitable size insulating board to make the panel robust, having double door with 14 swg s.s hinges along with double locking arrangement with arrangement for mounting of switch gear and electrical energy meter i/c powder coating, vermin proof having following items.1. mccb 63 amp, 4 pole-1 no2. rccb/elcb 63 amp, 4 pole with earth fault indicator and positive contact indication protecting a circuit automatically 1no3. fully automatic star delta starter of 10hp, 3phase oil immersed type 1no4. digital ampere meter 96mmx96mm square shape of 0-30 amp range 1no5. digital voltmeter of 96mm x 96 mm square shape of 0-500 volt range with selector switch 1no6. led indicating lamps with fitting (a set of 3 lamps) 1set7. shunt capacitor of 5 kvar with three phase isolator 1no8. motor protection assembly having earth leakage protection, phase sequence corrector, single phasing protection, over load protection, high voltage-low voltage protection. 1no9. programmable time switch (i.e. ryb phase & facility to change over from automatic to manual & vice versa) up to 10 h.p.1no10. complete wiring of panel board & installation of electrical accessories in the panel with required copper conductor wire & thimbling etc.as required. the panel board shall be mounted on the base frame of 600mm height made of 50x50x6mm angle iron frame.make:-all the insert used in panel must be of djb approved makes and should be isi marked where make of that equipment is not approved.djb item code 10.2.1, supply of pvc insulated pvc sheathed copper conductor flat cable size 3 core x 4sq mm,1100 volts, confirming to is 694(each roll 100mtr long) make: finolex / havells./kei/any djb approved make., s/o nut bolts,washer dia 1 long full threaded, s/o rubber packing 50 mm dia. flange., lowering and lifting of sub/sets from bore by taking out double flanged gi pipes, submersible p/set, cable, cutting of rusted nuts and bolts etc and replacement of damaged d/f gi pipes, cable, defective pump set etc as per site requirement and lowering of sub p/set, sub cable, gi pipe etc as required, jointing of cable from sub p/set along with holding of cable with pipes and jointing of d/f pipes etc with nuts bolts and rubber packing etc. the job includes hiring of all t&p, tripod stand, chain pulley block and other material handling equipments, safety gadgets ad required and consumable material (rubber packing and nuts bolts) will be arranged by the firm as per site requirement. the other material required during execution will be provided by department.

CTN :43037818

30 Dec, 2025 NA

Pune - Maharashtra

Tender For supply of varnish insulating elmotherm h -71 a suitable for h-class insulatsan of dr. beck & co. /pune or equivalent, packing 21 kgs. shelf life of item is 12 months.

CTN :42933062

08 Dec, 2025 NA

Shimla - Himachal Pradesh

Tender For tender for supply of job order for urgent repair of transformer of cap 400 kva at mil stn kalka : : - disconnecting ht and lt supply taking down the defective transformer indoor outdoor type from four pole two pole structure or lifting from the outdoor type foundation or taking out from sub station bldg using a crane of suitable capacity and slings ropes etc as required and shifting the same to civil workshop for repairs complete all as directed for transformer capacity 400 kva , shifting back the repaired transformer indoor outdoor type from civil workshop to site reinstalling at original position and fixing properly on four pole two pole structure or outdoor type foundation or inside a sub station bldg using a crane of suitable capacity and slings ropes etc as required making ht lt side connections and testing for satisfactorily working complete all as directed for transformer of capacity 400 kva , draining out transformer oil from the transformer and storing the same in suitable containers to be arranged by contractor without any extra cost opening the top cover and lifting up the core assembly carefully to check the condition of transformer windings and core retanking the same after repairing checking of leakage from transformer body and repairing welding works required for making transformer body leak proof refilling the transformer oil dully dehydrated and filtered dehydration and filteration to be paid separately and making all connections with ht lt side bushings refixing the top cover and testing the transformer with a suitable capacity insulation tester complete all as directed for transformer of cap 400 kva , m and l for rewinding of burnt out defective ht copper coils with new super enamelled heavy duty copper winding wires of size matching to the existing one including varnishing drying in a suitable oven and all insulating material such as cotton sleeves tapes etc and connections with bushing terminals complete all as specified and directed , all as per item no 4 above but lt copper coils complete all as specified and directed , m and l for painting the transformer tank from inside with two coats of zinc chromite after preparing the tank walls bottom top cover inner side by properly cleaning the surfaces oil free complete all as directed for transformer capacity 400 kva , m and l for replacement of defective ht porcelain bushing of suitable size for transformer of cap 400 kva including washers of good quality complete all as specified and directed , m and l for replacement of defective lt porcelain bushing of suitable size for transformer of cap 400 kva including washers of good quality complete all as specified and directed , dehydration and filteration of transformer oil for indoor outdoor type transformers of any capacity at site using transformer oil filteration plant to improve di electric strength not less than 45 kv at 2 point 5 mm electrode gap complete all as directed note unit rate quoted shall be deemed to include the charges for hiring of oil filteration plant shifting to different locations at cantt area testing of samples of oil as per requirement and nothing extra will be paid on this account , s and f new transformer oil for replacement or topping up the level of oil having dielectric strength not less than 45 complete all as specified and directed

Central Government / Public Sector

CTN :42705306

08 Dec, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : rate contract for manufacture and supply of hvn-66 insulating liner conforming to rdso drg. no. t-3706 alt-9 for use with psc sleeper t-2496 suitable for 60kg (uic)/60e1 rail. this is a safety item. specification : irs specification for glass filled nylon-66/ high viscous nylon-66 insulating liners sl. no t-44-2025 (third revision).

Central Government/Public Sector

CTN :42866941

08 Dec, 2025 NA

Bhusawal - Maharashtra

Tender For fabrication & supply of: item no. (i) 11 [fabrication & supply of: item no. (i) 11200 mm o/r (curved) fan shaped switches for 1 in 16, t/out for bg 60 kg (uic) on psc sleepers to rdso drg. no. t-5692 alt. 4 with latest alternation, complete with stock rails and all parts including check rails as listed in the drawing but excluding grooved rubber sole plates, insulating liner, elastic rail clip, plate screw, fish plates and fish bolts & item no. (ii) 12460 mm o/r (curved) fan shaped switches for 1 in 20, t/out for bg 60 kg (uic) on psc sleepers to rdso drg. no.]

Central Government / Public Sector

CTN :42763482

16 Dec, 2025 NA

Vijayawada - Andhra Pradesh

Tender For set of spares required for m/s. eipl or m/s. safe system india pvt. ltd. make cable head termination of 3-phase locos as per clw specification no. clw/es/0251 rev.1 or latest if any consisting of 03 items as follows. 1) basic insulating plug as per m/s. eipl part no. 750 bip or its equivalent in m/s. safe system india pvt. ltd. qty/set. = 06 nos.2) basic elbow connector as per m/s. eipl part no. 755 blr or its equivalent in m/s. safe system india pvt. ltd. qty/set. = 04 nos.3) stud assembly as per m/s. eipl part no. 750 sa or its equivalent in m/s. safe system india pvt. ltd. qty/set. = 10 nos.note: one sample of each item in the set should be got approved before effecting bulk supply.

Thermal Insulation Pad Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government / Public Sector

Central Government/Public Sector

Central Government / Public Sector