Latest thermal overall Tenders | Government thermal overall Tenders

Central Government/Public Sector

CTN :45066324

04 May, 2026 NA

Chennai - Tamil Nadu

Tender For supply of one coach set of side wall frame work, carline and welding parts for laccw amrit bharat (828) shells to drg nos 1) frame work to drgs no 82814005, alt 'nil' - 1 no 82814006, alt 'nil' - 1 no items in drawings above for column i to be supplied as loose. 2) carline to drgs no 59314014, alt 'e' 1 no 59314015, alt 'f' 1 no 3) welding parts to drgs no 82814009, alt 'b' - 1 no- 82814010, alt 'b' - 1 no 4) housing for led destination board to drg no 87414028, alt 'b' - 2 nos special condition : to be supplied as coach set only. for carline icf/j&t/sk-1882, alt 'nil' the chair pillars shall be packed in the container as per icf/j&t/sk-1865-alt 'a'. other partition frames not fitting in the container shall be stacked one over the other, secured using packing strip and placed in steel pallet. the height of each stack shall not exceed 750mm for easy handling. suitable and suffcient packing strips to be used such that stacked items do not disintegrate during transit, storage and handling. (safety item) [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45066336

05 May, 2026 NA

Chennai - Tamil Nadu

Tender For supply of head stock cpl for lhb under frame (ls,lwscn,lwscz,lwaccw,lwaccn) to drg. no. 49512001, alt "g", col.i. the firm shall fulfill the requirement as per icf/md/spec-147, issue status-01, rev-02 with amendment no.02. special condition : packing drg similar toicf/j&t/sk-1706, alt 'a' be followed. i) special care to be taken for under slung items while transit. ii) for painting system follow the drg no 53811116, alt 'e' iv) details for stage inspection. (a) raw material stage # ensure the raw material used using portable spectrometer (b) jig stage # dimensional & visual checks. # punching of serial no & ensuring proper traceability. (c) surface preparation and painting stage. # short/sand blast to the requirements. # painting process as per the specification. # final product inspection. [safety item ]

Central Government/Public Sector

CTN :45066770

02 Jun, 2026 NA

Kapurthala - Punjab

Tender For supply of traction transformer for hs-spic with required number of secondary traction windings along with protection equipment, safety chain arrangement and ht cablewith protection shield including termination crimping lugs, cable markers with heat shrinkable sleeves for power and control cables, mating connectors, equipment mounting and earthing hardware and accessories including auxiliary machines such as oil pump, oil cooling blowers as per clause 4.3 of rdso specification no. rdso/pe/spec/emu/0196-2019 (rev.0) along with mounting hardware (one set per hs-spic)., as per drawing: as per clause 4.3 of rdso specification no. rdso/pe/spec/emu/0196-2019 (rev.0), packing instruction: suitably covered with biodegradable transparent polythene and packed in wooden box.the material used for product packaging shall be eco-friendly .each packing shall be stenciled/labeled handle with care, consignee name, order no,pl's no , description ofitem, batch no, drg/spec no, qty,firm's name, &date of despatch etc. note- 1) firms have option to provide qr code. for linkage of po, the cardboard box shall carry a qr code having details as listed below: a)nameof the manufacturer b)purchaseorder number c)purchaseorder date d)uniqueserial number (or lot number for bulk items) of the manufacturer or e)dateofmanufacture f)deliverychallan no. g)deliverychallan date 2.the qr code shall be as per iso/iec 18004 model2 and the data shall be available as xml using the tags detailed above. [ warranty period: 36 months after the date of delivery ]

Central Government/Public Sector

CTN :45066671

21 May, 2026 NA

Hubli - Karnataka

Tender For supply of heavy duty polyester (nylon) webbing sling (as per attached pohoto )with four leg bridle belt oblong master link at one end and eye hooks safety latch on other end. to be supplied with load test certificates. the specifications are (1) capacity: 2 ton/each belt (2) length : 3.6 mts for 2 nos and 3.4 mts for another 2 nos. (3) width : 50mm (4) ply: 4 ply (5) warranty : 12 months from received of items. [ warranty period: 12 months after the date of delivery ]

State Government

CTN :45061764

08 May, 2026 81.29 Lacs

Diu - Gujarat

Tender For proposal to carry out painting, doubling, miscellaneous repairing and maintenance work, supplying of specialised material and other allied items for safety measures of khukri vessel p-49 in diu district (5th call)

Central Government / Public Sector

CTN :45061691

11 May, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - lot no : 3132604006 1)98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis) scrapof cond. & u/s. 8 wheeler wagons, boxn m1 , bobrn m1, boxnr . available on rails. 1) ser boxn m1 10079673692, 2) scr boxn m1 10099630576 3) cr boxnr 25019660533 ,4) er bobrn m1 72029661012 , 5) nr boxn m1 10039661080. location road no.4 . at dump yard. rc items: 1.coupler bodies (nt), 2, yokes 3. knuckles , 4.draft gears, 5.striker castings (nt), 6. centre pivots 7. casnub bogies with out all fittings with wheel sets, 8.break cylinder 355 9.auxilary resivour,10.dustributer valve 11.cp pb with control revioser 12.sab, 13.boxn doors, 14.yoke pin support (1st plate),15. safety plate with anchor plate(2ndplate16.yoke support plate(3rdplate),17.cock ofangle cock.18.yoke pin,19)draft gear followers,20.knuckle pin.21.knuckle thrower.22.bronze buishes ds8no:0999603006. dt:.29.04.26. note to purchaser : before delivery of wagon cut off parts, the declared. rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 42.199.mt (m.s -37.197, ss-5.002) sold by number basis only.05 nos, delivery in cut of parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos.

Central Government / Public Sector

CTN :45061692

11 May, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - lot no : 3132604007 1)98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis) scrap of cond. & u/s. 8 wheeler wagons, boxn m1 , bcn m1 , available on rails. 1) ser boxn m1 10079639360 ,2) ser boxn m1 10079666168 3) special repair boxn m1 10069661050, 4) ser boxn m1 10079561883,5) nr bcn m1 30039062397. location road no: 4 . at dump yard. rc items: 1.coupler bodies (nt), 2, yokes 3. knuckles , 4.draft gears, 5.striker castings (nt), 6. centre pivots 7. casnub bogies with out all fittings with wheel sets, 8.break cylinder 355 9.auxilary resivour,10.dustributor valve 11.cp pb with control revioser 12.sab, 13.boxn doors, 14.yoke pin support (1st plate),15. safety plate with anchor plate(2ndplate16.yoke support plate(3rdplate),17.cock of angle cock.18.yoke pin,19)draft gear followers, 20.knuckle pin.21.knuckle thrower.22.bcn swing, 23.bcnflap ds8no:0999603007. dt:.29.04.26. note to purchaser : before delivery of wagon cut off parts, the declared. rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 47.174 (ms) .mt sold by number basis only.05 nos delivery in cut of parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos.

Central Government / Public Sector

CTN :45061693

11 May, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - lot no : 3132604008 1)98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis) scrap of cond. & u/s. 8 wheeler wagons, boxn m1 , bcn m1 , available on rails. 1) ser boxn m1 10079663785 ,2) scr boxn m1 10099660948 ,3) er bobrn m1 72029561756 ,4) ser boxn m1 10079661330,5) er boxnr 10029661076 location road no: 4 . at dump yard. rc items: 1.coupler bodies (nt), 2, yokes 3. knuckles , 4.draft gears, 5.striker castings (nt), 6. center pivots 7. casnub bogies with out all fittings with wheel sets, 8.break cylinder 355 9.auxilary resivour,10.dustributor valve 11.cp pb with control revioser 12.sab, 13.boxn doors, 14.yoke pin support (1st plate),15. safety plate with anchor plate(2ndplate16.yoke suppor tplate(3rdplate),17.cock of angle cock.18.yoke pin,19)draft gear followers,20.knuckle pin.21.knuckle thrower.22.bronze buishes s8no:0999603008. dt:.29.04.26. note to purchaser : before delivery of wagon cut off parts, the declared. rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 45.732.mt (m.s-41.400, ss-4.332) sold by number basis only 05 nos delivery in cut of parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos.

Central Government / Public Sector

CTN :45061694

11 May, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - lot no : 3132604009 1)98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis) scrapof cond. & u/s. 8 wheeler wagons, boxn m1 , bcn m1 , boxnr ,available on rails. 1) special repair boxn m1 10069660152, 2) special repair bcn m1 30069004213 ,3) ser boxnr 25079661945 ,4) cr bcn m1 30019016389 ,5) er bcn m1 30029024992. location road no: 4 . at dump yard. rc items: 1.coupler bodies (nt), 2, yokes 3. knuckles , 4.draft gears, 5.striker castings (nt), 6. center pivots 7. casnub bogies with out all fittings with wheel sets, 8.break cylinder 355 9.auxilary resivour,10.dustributor valve 11.cp pb with control revioser 12.sab, 13.boxn doors, 14.yoke pin support(1stplate),15.safety plate with anchor plate(2ndplate16.yoke support plate(3rdplate),17.cock of angle cock.18.yoke pin,19)draft gear followers,20.knuckle pin.21.knuckle thrower.22.bcn swing,23.bcnflaps8no:0999603009. dt:.29.04.26. note to purchaser : before delivery of wagon cut off parts, the declared. rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 52.677.mt (m.s-48.272, ss-4.405) sold by number basis only 05 nos delivery in cut of parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos.

Central Government / Public Sector

CTN :45066212

11 May, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - lot no 3132604001 .pl no.98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis) scrap of cond. & u/s. 8 wheeler wagons, bcn m1 , boxn m1 , bobrn m1, boxnr . available on rails. 1) er bcn m1 30029161826. 2) special repair bcn m1 30069062244. 3) ser bcn m1 30079060452 . 4) special repair boxn m1 10069660992 . 5) er bobrn m1 72029660268 . 6) nr boxnr 25039660179 location road no.3 . at dump yard. rc items: 1.coupler bodies (nt), 2, yokes 3. knuckles , 4.draft gears, 5.striker castings (nt), 6. centre pivots 7. casnub bogies with out all fittings with wheel sets, 8.break cylinder 355 9.auxilary resivour,10.distributor valve 11.cp pb with control revioser 12.sab, 13.boxn doors,14.bcn swing,15. bcn flap 16.yoke pin support (1st plate),17. safety plate with anchor plate(2ndplate18.yoke support plate(3rdplate),19.cock of angle cock.20.yoke pin,21)draft gear followers,22.knuckle pin.23.knuckle thrower.24.bronze buishes ds8no:0999603001. dt:.24.04.26. note to purchaser : before delivery of wagon cut off parts, the declared. rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 72.926 .mt (m.s -68.740, ss-4.186) sold by number basis only.06 nos. delivery in cut of parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 06 nos.

Thermal Overall Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors