Latest thermal printing paper Tenders | Government thermal printing paper Tenders

State Government

CTN :45430001

13 Jul, 2026 NA

Goa - Goa

Tender For corrigendum : procurement of medical consumables items for use by the cardiology department, goa medical college, bambolim - injectable cardiovascular ultrasound contrast agent comprised of lipid-coated echogenic microbubbles filled with octafluoropropane gas or equivalent approved agent (cost comparison will be based on per study cost); in remarks - please detail the dose required per study per the instructions for use, disposable electrodes designed specifically for patient monitoring, disposible electrodes designed specifically for stress testing - please quote only those that are specifically designed for stress testing, disposible electrodes designed specifically for holter monitoring - please quote only those that are specifically designed for holter monitoring, disposable defibrillator patches (anterior and posterior) for use with philips brand defibrillators, disposable radiolucent defibrillator patches (anterior and posterior) for use with philips defibrillators, printer paper roll for philips mrx defibrillator and for efficia defibrillators, thermal printing paper for sony thermal printer used with echocardiography machines (model up/d-897), ultrasound jelly for echocardiography 5 litre pack, ecg thermal printing paper for use with philips pagewriter tc20 ecg machine; philips make only, ecg thermal printing paper for use with ge mac 5500 hd ecg/stress testing machine; ge make only, ecg thermal printing paper for use with bpl cardiart 6208 view plus ecg machine; 80 mm width roll, filter for hamilton ventilator hma anti-bacterial filter, flow sensor for hamilton g5 ventilator, oxygen cell for hamilton g5 ventilators, oxygen sensor medtronic pb840 ventilators, oxygen sensor medtronic pb840 ventilators, oxygen sensor medtronic pb840 ventilators, abg machine sensor cassette for radiometer abl 9 machine - 200 tests with 60 days validity with ph, pco2, po2, hct, na, k, ca++, chloride, lactate, abg machine ssolution pack for radiometer abl 9 machine (sp9), ventilator circuits (two limb) for adult patients, non-invasive ventilator face mask, nasal prongs for pediatric patients, normal saline 1 l pouch pack suitable for use with pressure infusor bag, normal saline 0.5 l pouch pack suitable for use with pressure infusor bag, pressure bag with manometer for iv infusion/pressure infusor bag, silk suture sterilized and packed with cutting needle 1.0 silk nw 5062 or equivalent, silk suture sterilized and packed with round body needle 1.0 silk nw 5063 or equivalent, surgical skin stapler with stapler cartridge for pacemaker pocket closure, staple remover, surgical disposible scalpel blade only number 11, surgical disposible scalpel blade only number 15, iodine impregnated antimicrobial transparent incise drape 23 x 23 cm, film transparent dressing with non-adherent pad 3 1/2 inches x 6 inches (9 x 15 cm), packing material for cath lab use 5 cm width x 200 metres roll, packing material for cath lab use 7.5 cm width x 200 metres roll, packing material for cath lab use 10 cm width x 200 metres roll, packing material for cath lab use 15 cm width x 200 metres roll, packing material for cath lab use 20 cm width x 200 metres roll, packing material for cath lab use 25 cm width x 200 metres roll, packing material for cath lab use 30 cm width x 200 metres roll, ethylene oxide (eto) gas cartridge, labelling instrument for packed items for cath lab, printer ribbon for use in labelling instrument l-1 will be calculated for labelling instrument with label rolls (total quantities), label roll for use with instrument quoted for in labelling instrument with built in eto exposure indicator, label roll for use with instrument quoted for in labelling instrument with built in steam exposure indicator, biological indicator for use in eto sterilizer, biological indicator for use with autoclave sterilizer, incubator for use with biological indicators quoted above l-1 will be calculated for incubator with total quantities of biological indicators in above t

Central Government/Public Sector

CTN :45660913

08 Jul, 2026 79.4 Thousand

Kottayam - Kerala

Tender For purchase of general chemicals and consumables for genome analysis lab - sodium chloride , chloroform , tryptone ,, yeast extract powder , agar agar type 1 , sony thermal printing paper , rna intact

Central Government And Public Sector

CTN :45496836

01 Jul, 2026 1.50 Crore

Raichur - Karnataka

Tender For corrigendum : supply and installation of various equipments to dept. of obg, rims teaching hospital, raichur

CTN :45384708

27 Jun, 2026 14.70 Lacs

Gwalior - Madhya Pradesh

Tender For corrigendum : purchase of equipments - purchase of manikins, full body advance manikin for medical teaching & training with 03 years warrenty, half body cpr training manikin with 03 years warrenty

CTN :45618276

29 Jun, 2026 NA

Kamrup - Assam

Tender For supply of barium sulphate suspension palatable non flocculating high density 200 percent w slash v , non ionic contrast medium 0 dot 5 mmol slash ml for mri in 10ml prefilled syringe slash vial , high glossy thermal printing paper roll size 110mm x 18 to 20 mtr for printing usg images , ultrasound probe cover , ultrasound probe cleaning swab , x-ray detectable gauze swabs 12 plies width 10 dot 0 cm plus 0 dot 5 cm length 10 dot 0 cm plus 0 dot 5 cm

CTN :45252742

19 Jun, 2026 NA

Jorhat - Assam

Tender For bid to ras supply of iohexol 350 mgml 200 ml inj , inj iohexol 300 mgml in vial of 50 ml , non ionic iodinated contrast 300 mg per ml, 100 ml vial , pressure injector syringe stellant sterile disposable syringe for ct injector medrad stellant dual syringe pressure injector , presurre injector connector for ct injector medrad stellant dual syringe pressure injector , thermal printing paper sony high glossy type v , cr film 10 x 08 compatible with trimax tx55 laser image pack of 125 , cr film 17 x 14 compatible with trimax tx55 laser image printer pack of 125 , mri film 14 x 17 dry imaging filmcompatible with care stream 6950 pack of 125 sheets , cr film 14x 17 fuji medical dry imaging film compatible with fuji film dry pix 6000 camerapack of 100 sheet , cr film 10x 8 fuji medical dry imaging film compatible with fuji film dry pix 6000 camerapack of 150 sheet

CTN :45583386

01 Jul, 2026 NA

Delhi - Delhi

Tender For tender for supply of medicines - ofloxacin + ornidazole tab , mecobal od tab , calcium + d3 tab , glycopyrrolate +formetrol + fluticasone rotacap , prednisolon 40 mg tab , mesalamine enema , mometasone + glycopyrronium + indacaterolcap , linezolid 600 mg tab , ecg roll , oxybenzone + titanium dioxide oint , aa size battery , flosser dental , ambroxol tab , ripasudil eye drop , benzydamine mouth wash , thermal printing paper , fluorometholone eye drop , prednisolone 20 mg tab , olapatadine od eye drop , methylcobalamin nasal spray , diclofenac spray , semaglutide 14 mg tab , esmoprazole + it tab , linagliptin 10 mg tab , iron + folic acid cap , vsl3 cap , calcium vit a vit b vit c vit e vit biotin tab , adaplene oint , oxetacaine + aluminium hydroxide + milk of magnesia gel , minoxidil 5% solution alcohol free , phenytoin sodium inj , travapost eye drop , bilastine 20 mg tab , (glycerin + disrearyldimonium + cetyl alcohol+ isopropyl palmitate + dimethicone) lotion , lignocaine 2% inj , human normal immunoglobulin inj , mannitol inj , telmisartan 40 mg tab , cilnidipine 10 mg tab , desensitizing paste , isabgol husk , mifepristone 25 mg tab , salmeterol + fluticasone rotacap , orciprenaline 10 mg tab , posaconazole 100 mg tab , midodrine 5 mg tab , lactulose syp , breviracetam syp , permethrin cream , folic acid + pyridoxine + vit b12 , melatonin 3 mg tab , vitamin d3 cap , melatonin 5 mg tab , clidinium + chlordiazepoxide + dicyclomine tab , sucralfate syp , caprylic + glycerin + ceramide + butyrospermum lotion , alkyl lactate + butylene + glycerin + paraffin , lignocaine + beclomethasone + phenylephrine oint , vitamin d3 inj , hepatic resource pulv , prednisolone eye drop , pancreatin 40000 tab , cholecalciferol 1 gm sach , glycolic acid + salicylic acid oint , urea cream , fluticasone nasal spray , fluticasone + azelastine nasal spray , levosalbutamol + ipratopium inhaler , primavanserin 34 mg tab , trimetazidine mr 80 mg tab , loperamide 2 mg tab , abdominal swap , urobag , polyethylene glycol eye drrop , thyroxine 125 mcg tab , bisacodyl 5 mg tab , promethazine inj , dexamethasone inj , ankle support , carbidopa 25 mg + levadopa 100 mg tab , montelukast + levocetrizine tab , nitroglycerin 6.4 mg tab , pramipexole 0.5 mg tab , amisulpride 50 mg tab , phenobarbitone 30 mg tab , rasagiline 1 mg tab , glycopyrolate inj , nepafenac eye drop , derifenacin 7.5 mg tab , calcium phosphorous syp , gefetinib 250 mg tab , vonoprazon 20 mg tab , frusemide syp , alpha glycerylphosphorylcholine 250 mg + piracetam 800 mg tab (piranulin) , cilostazol 50 mg tab , pirfenidone 200 mg tab , perindopril 8 mg tab , zoniasamide 25 mg tab , desmopressin 0.1 mg tab , kojic acid oint , nintedanib 150 mg tab , labetalol 100 mg tab , lithium carbonate 300 mg tab , mecobalamin 1000 mg inj , erythropoietin 100 mg inj , glycopyrolate 1 mg tab , clobazam syp , caroverine 20 mg tab , ginko biloba tab , propranolol 10 mg tab , levosulpride 25 mg tab , desvenlafaxine 50 mg tab , phenobarbitone syp , mmf 500 mg cap , folic acid + dha tab , acotiamide 100 mg tab , gabapentin 400 mg + nortriptyline 10 mg tab , d mannose + cranberry tab , mefenemic acid + paracetamol tab , telmisartan + chorthalidone tab , clindamycin + adaplene gel , biotin 10 mg tab , nebivolol 2.5 mg tab , silodosin 8 mg tab , levofloxacin 500 mg tab , colchicine 0.5 mg tab , l carnosine syp , nicotine patch , glucostrip , lorazepam inj

CTN :45532259

21 Jun, 2026 NA

Kanchipuram - Tamil Nadu

Tender For supply of mechanical and electrical equipments - supply - mechanical lab equipments, single phase ac circuit kit for voltage, current and power measurement- 5a,300v, 300w/5a measurement of power by using various loads analog voltmeter 0-300v ac panel mountedanalog ammeter 0-5a ac panel mountedanalog wattmeter 1.5kw ac panel mountedsingle phase digital power monitor to measure powersingle phase ac lamp load 230v/5a 1kwpanel enclosure with hylam front panel with input/outputterminal outlets , mcb elcb trainer kit- 1 phase/3 phase, 2/3/4 pole, 3a-16a single pole mcb 2-5ampstwo pole elcb 30malamp load single phase 5amps panel enclosure and terminal outlets, four stroke petrol engine cut section model - single cylinder four stroke petrol engine cut sectional model with carburetor, spark plug, cut cylinder, piston, connecting rod, crank shaft, valve mechanism, cam shaft, timing gears and flywheel. all parts cut opened to study the components and its working provision to take values for valve timing. surface finish: painted and color coded for easy identification of components mounting: heavy-duty ms fabricated stand/base display type: static / dynamic demonstrationmodel, dc motor - type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armaturefeatures: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder - bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply: mounted on training base suitable for dismantling and inspection, bearing with shaft assembly - type: dismantling and assembly teaching unit shaft diameter: 30 mm shaft material: en8 steel bearings: deep groove ball bearing (6205 / 6206) housing: cast iron locking arrangement: circlips lock nuts end coversmounting: bench-mounted / frame-mounted unit, coupling unit using driving and driven shafts using plummer block bearing unit- the plummer block housing material: cast iron (grade fg 200 or equivalent).type: sng or snl series (split-type housing).sealing: felt seals or v-ring seals (to demonstrate lubrication retention).lubrication: provided with a grease nipple at the top center for manual lubrication practice. the bearingtype: self-aligning ball bearing (1200 series) or spherical roller bearing (22200 series).bore diameter: standard 25mm or 30 mm. shafting and coupling shaft material: groundcarbon steel (en8 or en9) for high surface finish. coupling type: flexible coupling: to demonstrate the bearings ability to handle slight misalignment. rigid flange coupling: to demonstrate traditional direct connection. driving/driven setup: one shaft connected to a small electric motor (driving) and the other to a brake drum or load (driven)., (a).sliding mesh gear box for dismantling and assembling - (a) max transmitted power 1to1.5hp, torque capacity- 40 to 200nm, number .of speed 3 to 6, gear module 1.5 to 2, sliding mesh gearbox gearbox type- sliding mesh forward gears- 3reverse -yes gear material -alloy steel lubrication- splash / oil gear teeth- spur typical gear ratios- 3.2:1 / 2.0:1 /1.3:1 input speed- 0 1800 rpm housing material- cast iron(b) constant mesh gear box cut section - constant mesh gearbox (cut section) gearbox type :constant mesh forward gears :4 gear teeth -helical / spur dog clutch type- sliding lubrication -oil sae 80w90 housing- cut section material -hardened alloy steeleducational features-labeled parts., measurement scale: a vertical steel meter scale, usually with (1mm) graduations, for precise deflection measurement., accessories: includes a set of slotted weights (e.g., (6times 50g) or similar sets) for incremental loading.

State Government

CTN :45508681

07 Jul, 2026 1.72 Crore

Multi City - Chhattisgarh

Tender For tender for thermal printing paper roll

CTN :45384476

17 Jun, 2026 NA

Dharmapuri - Tamil Nadu

Tender For corrigendum : purchase of equipments for mechanical department - purchase of equipments for mechanical department, tail stock assembly medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, working model of fuel supply system - petrol mpfi type petrol multi point fuel injection (mpfi) system for dismantling and assembly practice system type: non-working / cut-section model for study of internal construction construction: actual automotive components or equivalent training model mounted on frame includes throttle body (sectioned), fuel injectors, fuel rail, intake manifold includes fuel pump, fuel tank (dummy), fuel filter, pressure regulator includes ignition system components: ignition coil, spark plug, distributor (if applicable) ecu module (dummy/display type) with wiring layout representation all components cut-open, painted, and clearly labelled provision for manual demonstration of flow path and component interaction mounted on rigid ms powder-coated frame designed for repeated dismantling, assembly, and component identification, hydraulic cylinderbore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply: mounted on training base suitable for dismantling and inspection, hydraulic operated directional control valves (dcv) type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study, bearing with shaft assembly type: dismantling and assembly teaching unit shaft diameter: 30 mm shaft material: en8 steel bearings: deep groove ball bearing (6205 / 6206) housing: cast iron locking arrangement: circlips end covers mounting: bench-mounted / frame mounted unit, coupling unit using driving and driven shafts using plummer block bearing unit the plummer block housing material: cast iron (grade fg 200 or equivalent). type: sng or snl series (split-type housing). sealing: felt seals or v-ring seals (to demonstrate lubrication retention). lubrication: provided with a grease nipple at the top center for manual lubrication practice. the bearing type: self-aligning ball bearing (1200 series) or spherical roller bearing (22200 series). bore diameter: standard 25mm or 30 mm. shafting and coupling shaft material: ground carbon steel (en8 or en9) for high surface finish. coupling type: flexible coupling: to demonstrate the bearings ability to handle slight misalignment. rigid flange coupling: to demonstrate traditional direct connection. driving/driven setup: one shaft connected to a small electric motor (driving) and the other to a brake drum or load (driven)., 3d printing machine build volume(wxdxh) 256 x 256 x 256 mm shell enclosed (plastic & glass) hot end all-metal nozzle 0.4 mm stainless steel included max hot end temperature 300 nozzle diameter 0.4 mm (included) 0.2 mm, 0.6 mm, 0.8 mm build plate compatibility textured pei plate, cool plate, engineering plate, high temperature plate max build plate temperature 100 max speed of tool head 500 mm/s max acceleration of tool head 20 m/s supported filament pla, petg, tpu, pva, pet, abs, asa chamber monitoring camera low rate camera 1280 x 720/0.5fps time lapse supported filament run out sensor :yes control board fan closed loop control auxiliary part cooling fan closed loop control air filter activated carbon filter

Thermal Printing Paper Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government And Public Sector

State Government