Thermal Relief Valve Tenders

Get complete information related to latest Thermal Relief Valve Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Thermal Relief Valve Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Thermal Relief Valve Tenders .

Filter

Loading....

Get Tender in Email

State Government

CTN :40095274

19 May, 2025 NA

Birbhum - West Bengal

Tender For providing electro-mechanical accessories and others at pump house- i and ii for bahadurpur w/s scheme at murarai -i block under bolpur mechanical division phe dte. - supply and delivery at site of the following submersible pumping machinery and electrical accessories as per approved vendor list of phed, submersible pumping machinery directly coupled with water proof suitable size motor having following specification :- pump:duty condition -25.74 m3/hr, head- 57 mtr, shaft-stainless steel, impeller- s.s / gm, outlet size: 65mm / 80mm., motor:submersible type 3 ph , 50hz, 415 volt 10% 2900 rpm motor must be suitable for operation with star delta starter.(test certificate along with characteristic curve should be submitted at the time of delivery)., 1.1kv grade 4 sq.mm x 3 core water proof flat submersible cable for above pump-motor set., 1.1kv grade 10 sq.mm 3 core xlpe insulated aluminium armoured cable conforming to is 7098 (part-i) 1988, with upto date amendments., supply and delivery of the following valves, pipes and gauges etc at site, 3mtr long 80mm dia upvc standard type column pipe [cream color] with both side threaded and one end side socketed with registered kpmg, 1.5 mtr long 80mm dia upvc standard type column pipe [cream color] with both side threaded and one end side socketed with registered kpmg., 80mm dia. ci top & bottom adopter., heavy type suitable dia. ms suspension clamp along with nuts bolts and washers., 80mm dia. cidf non-raising sluice valves, pn 1.0 rating (conforming to is:14846) for delivery pipe line and wash out line.(moc & tc needed for valve)., 80mm dia. cidf single door swing non return valve, pn 1.0 rating (conforming to is:5312).(moc & tc needed for valve)., cidf 90 bend- 1no., ci flanged tee- 1no., blank flange-1no., ci/ ms flanged short piece 0.50 mtr.-1no, ci/ ms flanged pipe 1mtr.- 1 no. etc (as per is specification and certification registered) for construction of delivery pipe line and wash out line, heavy type 250mm dia./suitable split type tube well cover with clamping arrangement including supply of nuts, bolts and washer as per departmental design., anti snapping safety device for pump set by supplying suitable size of ms angle busket and nylon rope of required length including supplying of nuts, bolts and all other materials, 150mm dial pressure gauge [range 0-7kg/cm ] with glycerine filling inside the dial including brass cock and fitting complete [this cost includes 15mm. dia g.i. pipes and specials]., making brick pillar 0.25 x 0.25 x 0.75 mtr/suitable hight for supporting of valves and pipes with 12mm thick plaster and net cement finish complete., making cc foundation for support of the kiosk box after excavating the earth upto a depth of 0.6 mtr below the gl including supply of all materials complete with 12 mm thick cement plastering with net cement finishing complete as per direction of eic (size: 3 x 1 x 5)., suitable kiosk box for cable connection of submersible pump motor set with degree of protection ip 65 including suitable legs and 6 nos. al. bus bar for 32 amps and all necessary earthing arrangement and insulator as per direction of eic., laying of one no. cable 10 sqmm 3 core ( departmental supply) in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of thecable with 8 (eight) nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed., carrying and fixing three phase submersible pump 7.5 hp mug starter as per direction of eic ., installation of submersible pumping machinery to newly sunk tubewell along with column pipes (as required), top cover, valves, and specials of above with protection pipe and supply of ms clamp, nut bolt, cable gland socket etc. making inerconnection of the pump delivery line to pump collecting main line near tubewell with supply of all necceasary pipe, reducer/enlarger, gi/ms specials etc.

CTN :39875702

25 Apr, 2025 NA

North 24 Paragana - West Bengal

Tender For bid to ras tender for supply of oil pump assy , shim , oil pump , snap ring , retainer oil pump , strainer , muffler , ring , bolt , washer , band , bolt , clamp , spacer , bracket , bracket , brackt , spacer , elbow , nozzle , o ring , bolt , nut retaining , spill tube , spill tube , packing , gasket , gasket , bolt , bolt , bracket , bracket , plate , case , plug , bearing crankpin us 0.50 pair , bushing , connecting rod , bolt , connecting rod , dowel pin , bearing ball , bearing case , bearing ball , nut , snap ring , bearing ball , case bearing , dowel ring , shaft p t o , shaft spline , shim assy , snap ring , snap ring , snap ring , bearing ball , clip , flange , gasket , gasket , over flow valve , shim , spacer ring , tapered roller bearing , tapered roller bearng , threaded pin , delivery valve holder , retainer , bearing pin , compressor spring , hexagon nut , hexagon nut , plain washer , roller tappet assy , spring lock washer , straight pin , threaded pin , threaded ring , wood ruff key , control rod , control sleeve , filler piece , intermediate bearing , torx fillister screw , camshaft , compression spring , flat seal ring , flat seal ring , hexagon nut , micro encapsulated screw , pointer , roller , screw plug , spring seat lower , spring seat upper , bearing end plate , closing cover , flange bush , guide bushing , pump housing , screw plug , screw plug , shim plate 1.15 mm , shim plate 0.40 mm , shim plate 0.45 mm , shim plate 0.50 mm , shim plate 0.55 mm , shim plate 0.60 mm , shim plate 0.65 mm , shim plate 0.70 mm , shim plate 0.75 mm , shim plate 0.80 mm , shim plate 0.85 mm , shim plate 0.90 mm , shim plate 0.95 mm , shim plate 1.00 mm , shim plate 1.05 mm , shim plate 1.10 mm , shim plate 1.20 mm , shim plate 1.30 mm , shim plate 1.35 mm , shim plate 1.40 mm , shim plate 1.45 mm , shim plate 1.50 mm , shim plate1.25 mm , support ring , shaft , rocker arm assy , arm rocker assy. (intake) , arm. rocker assy. (exhaust) , spring , nut , cover , cylinder head , bolt , screw , bolt , 45 long , bushing , ce frame , bushing , lever hsg , bushing , drive hsg , insulator , insulator , insulator , lead , ce terminal , bearing bush , bearing bush c e , connector , insul(bush) bottom , insul(bush) top , nut , positive connector , armature , brush , field coil , housing , drive , screw-pole shoe , bush plate asm , drive assy , plunger , spring , brush , spring washer , armature assembly , brush carrier assy , brush gear carrier , brush gear ring assy , field coil assy , pole screw , thrust washer c.e , brush assembly , brush holder , c e bracket assy , d.e bracket , mounting flance assy , sealing ring , spring brush , fixing screw , gasket , 4st relay , wench filter , clamp , clip , elbow , bolt , tube , tube , spacer , stay , tube , gasket , o ring , bolt , bolt , cover , water outlet , manifold , water , manifold , water , bolt , connector , screw , bracket , spacer , lock , bolt , seat , shim 1.0 mm , shim

CTN :40064520

10 May, 2025 NA

North 24 Paragana - West Bengal

Tender For tender for supply of snap ring , body , adapter , plug , tube , tube , outlet , valve , oil pump , oil pump assy , spring oil pump , shim , oil pump , snap ring , retainer oil pump , strainer , muffler , ring , bolt , bolt , bolt , flange , washer , band , bolt , clamp , spacer , bracket , bracket , brackt , spacer , elbow , nozzle , o ring , spill hose ( 5 pieces) , banjo bolt , clip , bolt , nut retaining , spill tube , spill tube , nozzle holder assy , packing , banjo bolt , gasket , gasket , nipple , tube , bolt , bolt , element , bracket , bracket , plate , case , valve assy , plug , plug , pin piston , piston ( a type) , piston ring assy , bearing crankpin std(sp) 1 pr , bearing crankpin us 0.25 , pair , bearing crankpin us 0.50 pair , bushing , connecting rod , bolt , connecting rod , dowel pin , snap ring , bearing ball , bearing case , bearing ball , nut , snap ring , bearing ball , case bearing , dowel ring , shaft p.t.o , shaft spline , shim assy , snap ring , snap ring , snap ring , bearing ball , joint bolt , tube , clip , flange , delivery valve assy , gasket , gasket , gasket , o ring , o ring , o ring , oil seal , pump element , seal ring , over flow valve , shim , spacer ring , tapered roller bearing , tapered roller bearng , threaded pin , delivery valve holder , retainer , bearing pin , compressor spring , hexagon nut , hexagon nut , plain washer , roller tappet assy , spring lock washer , straight pin , threaded pin , threaded ring , wood ruff key , control rod , control sleeve , filler piece , flat head screw , intermediate bearing , torx fillister screw , camshaft , compression spring , flat seal ring , flat seal ring , hexagon nut , micro encapsulated screw , pointer , roller , screw plug , screw plug , spring seat lower , spring seat upper , bearing end plate , closing cover , flange bush , guide bushing , pump housing , screw plug , screw plug + , shim plate 1.15 mm , shim plate 0.40 mm , shim plate 0.45 mm , shim plate 0.50 mm , shim plate 0.55 mm , shim plate 0.60 mm , shim plate 0.65 mm , shim plate 0.70 mm , shim plate 0.75 mm , shim plate 0.80 mm , shim plate 0.85 mm , shim plate 0.90 mm , shim plate 0.95 mm , shim plate 1.00 mm , shim plate 1.05 mm , shim plate 1.10 mm , shim plate 1.20 mm , shim plate 1.30 mm , shim plate 1.35 mm , shim plate 1.40 mm , shim plate 1.45 mm , shim plate 1.50 mm , shim plate1.25 mm , support ring , gasket , shaft , rocker arm assy , gasket , arm rocker assy. (intake) , arm. rocker assy. (exhaust) , spring , nut , cover , cylinder head , cover , cylinder head , bolt , bolt , housing rocker , screw , bolt , 45 long , bushing , ce frame , bushing , lever hsg , bushing , drive hsg , insulator , insulator , insulator , lead , ce terminal , switch , bearing bush , bearing bush c e , connector , insul(bush) bottom , insul(bush) top , nut , positive connector , armature , brush , field coil , housing , drive , screw-pole shoe , bush plate asm , drive assy , plunger , spring , brush , solenoidswitch (37s)

CTN :40060386

28 Apr, 2025 158

Mandya - Karnataka

Tender For supply and delivery of water supply materials to h.malligere grampanchayat - hm_ 2 inch gi pipe, hm_ 6 hp motor pump with 10 stage, hm_ 7.5 hp motor pump with 12 stage, hm_ amps meter, hm_ 2 inch bore clamp, hm_ bucket washer, hm_ 2.5 inch bore clamp, hm_ contactor unit, hm_ 7 inch cassing pipe, hm_ cylinder, hm_ electrical contact kit, hm_ dol electrical panel board, hm_ sada electrical panel board, hm_ 4sqmm 3core copper cable flat type, hm_ 0.5 inch gi tap, hm_ 0.75 inch gi tap, hm_ m-12 boltnuts, hm_ mrf tape, hm_ no volt coil, hm_ 10 stage pump, hm_ 12 stage pump, hm_ pcv tape roll, hm_ relay ltlk, hm_ 1.2 mm rewinding copper wire, hm_ shalk thrid, hm_ 3hp v4 sm motor pump 30stage, hm_ bolt nut 3by8 inch, hm_ bolt nut 5by8 inch, hm_ rotor bush, hm_ do bush, hm_ stg bush, hm_ borewell handle, hm_ borewell head, hm_ borewell water tank, hm_ borewell pedestal stand, hm_ mcb 4 pole, hm_ 1.25 inch gi collar long, hm_ 1.25 inch gi pipe, hm_ gm upper valve, hm_ gm lower valve, hm_ hdpe end connector, hm_ 1.25 inch hdpe pipe, hm_ 1.5 inch hdpe pipe, hm_ impellers, hm_ nrv lather, hm_ plunger rod 3 meter, hm_ stick & paper, hm_ single pole mcb, hm_ thrust bearing & bottom, hm_ x nipple, hm_ 2hp v4 sm motor pump 20stage, hm_ 0.75 inch cpvc ball valve, hm_ 1 inch cpvc ball valve, hm_ 0.75 inch cpvc elbow & collar, hm_ 1 inch cpvc elbow & collar, hm_ 0.75 inch cpvc tee, fta, mta, hm_ 1 inch cpvc tee, fta, mta, hm_ cpvc gum 29ml, hm_ 1 inch cpvc pipe, hm_ 0.75 inch cpvc union and tank nipple, hm_ 1 inch cpvc union and tank nipple, hm_ gargen pipe 0.75 inch , hm_ gargen pipe 1 inch , hm_ 0.5 inch pvc mta & fta & end cap, hm_ 0.75 inch pvc mta & fta & end cap, hm_ 1 inch pvc mta & fta & end cap, hm_ 1.25 inch pvc mta & fta & end cap, hm_ 1.5 inch pvc mta & fta & end cap, hm_ 2 inch pvc mta & fta & end cap, hm_ 2.5 inch pvc mta & fta & end cap, hm_ 3 inch pvc mta & fta & end cap, hm_ solvent cement 100, hm_ solvent cement 50, hm_ solvent cement 250, hm_ solvent cement 500, hm_ 0.75 inch cpvc pipe, hm_ 0.5 inch pvc ball valve, hm_ 0.75 inch pvc ball valve, hm_ 1 inch pvc ball valve, hm_ 1.25 inch pvc ball valve, hm_ 1.5 inch pvc ball valve, hm_ 2 inch pvc ball valve, hm_ 2.5 inch pvc ball valve, hm_ 3 inch pvc ball valve, hm_ 4 inch pvc ball valve, hm_ 2.5 inch pvc elbow, hm_ 3 inch pvc elbow, hm_ 4 inch pvc elbow, hm_ 2 inch pvc joint collar, hm_ 2.5 inch pvc joint collar, hm_ 3 inch pvc joint collar, hm_ 0.5 inch pvc pipe collar, hm_ 0.75 inch pvc pipe collar, hm_ 1 inch pvc pipe collar, hm_ 1.25 inch pvc pipe collar, hm_ 1.5 inch pvc pipe collar, hm_ 2 inch pvc pipe collar, hm_ 2.5 inch pvc pipe collar, hm_ 3 inch pvc pipe collar, hm_ 4 inch pvc pipe collar, hm_ 1.25 inch gi bend, hm_ 2 inch gi bend, hm_ 2.5 inch gi bend, hm_ 2 inch gi collar h or v, hm_ 2.5 inch gi collar h or v, hm_ 2 inch gi non return valve, hm_ 2.5 inch gi non return valve, hm_ 0.5 inch gi pipe nipple 1 feet, hm_ 0.75 inch gi pipe nipple 1 feet, hm_ 2 inch gi pipe nipple 1mtr, hm_ 0.5 inch pvc elbow, hm_ 0.75 inch pvc elbow, hm_ 1 inch pvc elbow, hm_ 1.25 inch pvc elbow, hm_ 1.5 inch pvc elbow, hm_ 2 inch pvc elbow, hm_ 0.5 inch pvc pipe, hm_ 0.75 inch pvc pipe, hm_ 1 inch pvc pipe, hm_ 1.25 inch pvc pipe, hm_ 1.5 inch pvc pipe, hm_ 2 inch pvc pipe, hm_ 2.5 inch pvc pipe, hm_ 3 inch pvc pipe, hm_ 4 inch pvc pipe, hm_ auto starter, hm_ 1.25 inch gi collar, hm_ 0.5 inch gi elbow & collar, hm_ 0.75 inch gi elbow & collar, hm_ 0.5 inch pvc tee , hm_ 0.75 inch pvc tee , hm_ 1 inch pvc tee , hm_ 1.25 inch pvc tee , hm_ 1.5 inch pvc tee , hm_ 2 inch pvc tee , hm_ 2.5 inch pvc tee , hm_ 3 inch pvc tee , hm_ 4 inch pvc tee , hm_ 0.5 inch pvc pipe bend, hm_ 0.75 inch pvc pipe bend, hm_ 1 inch pvc pipe bend, hm_ 1.25 inch pvc pipe bend, hm_ 1.5 inch pvc pipe bend, hm_ 2 inch pvc pipe bend, hm_ 2.5 inch pvc pipe bend, hm_ 3 inch pvc pipe bend, hm_ 4 inch pvc pipe bend, hm_ relay unit-motor

CTN :40022675

01 May, 2025 NA

Baghpat - Uttar Pradesh

Tender For supply of machinery parts as per drawing year 2025-26 - m.s. roller for mud conveyor as per drg. 1268/r-2 dated 22.06.09) od 100mmxlength 225mm, od 90mm.xlength 200mm, od75mm.x length 630mm, od 100mm x length 740mm, c.s. trash beam bottom bracket as per drawing no. b/2008/c-1357 dated 09.07.08 conversion basis, g.r. pressure feeder nose plates scrappers to be mfg. as per drawing no. b/94/c-1087/r-2 dated 05.06.09, g.r. pressure feeder nose plates scrappers to be mfg. as per drawing no. b/94/c-1087/r-2 dated 05.06.09, on conversion basis., cast steel swing arm left hand/right hand (gear side) all over machined as per drawing no. b/2002/c-1265/r-2 dated: 22.4.2009, en-19 forged steel spur gear pinion having machine cut teeth for cane unloader, as per drawing no. b/2001/c-1256/r-1, 33 teeth., en-19, forged steel spur gear pinion having machine cut teeth for cane unloader, as per drawing no. b/2001/c-1256/r-1, 68 teeth., c.s.bearing housing with fitted 02 nos. locking camp. plate for roller shaft for mill (all over machined) to be manufactured as per drawing no. b/93/c-1011/r-2 dated: 13-06-2009 material cast steel is: 1030 grade 27-54, dismentling of chopper tubs and replacement of worn out hubs by new hubs, fitting and balancing as per drg. no. b/05/c-1129/r-1, replacement of bronze linner of mill hydralic cap, machining, buffering, fitting & testing., c.s.sprocket on conversion basis as per drg. no. b/94/c-1056, maching of transmission gear shaft from old shaft as per drg. no. b/2001/c-1258/r-1(material-cl-4, is-2004), c.s double sprocket 76 teeth for welding & machining with teeth cutting, c.s double sprocket 25 teeth for welding & machining with teeth cutting, pinion 38 teeth of new main bagasse carrier chain, pinion 25 teeth of new return bagasse carrier chain, pinion 52 teeth of old main bagasse carrier chain, pinion 25 teeth of old main bagasse carrier chain, worm & worm wheel for crystlizer as per drg. no. b/73/c-310, worm as per drg. no. b/75/c310, en-9 forged steel pin for mill a frame as per drg. no. b/2010/c-1377 dated: 12.06.2010. (2 section per pin), c.s. gr 26/52 is-1030 machined knife holder hub for cane leveler as per drg. no. b/2007/c-1337/r-1 dt. 17.07.2022 (without key), repair of links hole of block type chain, c.i. idler for cane carrier as per drg. b/2007/c-1340 on conversion basis with machining, repair of pinion teeth-38 of bagasse elevator, c.s. sprocket wheel 14 teeth for cane carrier head shaft maics-26/52, is 1030 as drg. no. b/94/c-1041/r2 dt. 20.06.2007, en-24 helical pinion with shaft no. of teeth-19, od-90mm, root dia-72mm,teeth face wide-180mm, total pinion shaft length-490mm as per sample, leaf spring supporting frame for grader as per drg. no. b/2022/c-1530. type-1 (spring steel flat size 75 x 8mm), en-9 steel shaft for mill house crane as per drg. no. b/2020/c-1571, mark-1, repair of chain block 02 ton cap., repair of chain block 01 ton cap., repair of chain block 05 ton cap., repair of chain block 03 ton cap., en-9 forged steel pin for mill a frame as per drg. no. b/2010/c-1377 dt. 12.06.2010 (2 section per pin), metalon/teflon ptef bush for rotary screen as per drg. no. b/2024/c-1562 dt. 04.07.2024, brass seat for juice heater double beat valve size 8 as per drg. no. b/2024/c-1564 dt. 14.07.2024

Loading, Please wait...

Thermal Relief Valve Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government