Latest thermit welding spares Tenders | Government thermit welding spares Tenders

Central Government/Public Sector

CTN :45592853

08 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of pway scrap - condemned u/s cl.iii rail 52 kg - 2697.46 mtrs quantity - 139.971mts. ds8 no.029520-26-00003 dt. 25.04.2026. custodian - sse/pw/cj location - at arakkonam , inside flash butt welding shop (fbw) in sse/pw/cj section. note- 1)delivery to be made on linear measurement basis. 2)when scrap rails for delivery on sectional weight basis are longer than 5 metres, to facilitate loading, purchasers [by engaging his own labourers] are permitted to cut the rails to convenient lengths of not less than 2.5 metres. 3) any type of road vehicle is permitted for loading of lot material. however, depending upon the lot location, on the date of delivery, the custodian shall decide on granting such permission, strictly observing all prescribed safety precautions.. 4)any clarification in location/ ds8 no & date - manual ds8/inspection report may be reffered with custodian(lot quantity column in catalogue/do is authentic. 4) purchaser has to ensure that lorry, crane , labour are arranged well in advance before effecting inventory of the lot(wherever applicable). 5)custodian should arrange to issue hard copy(phostat) of ds8s,do, etc.,(only essential documents) to all witnessing officials at the do location before taking inventory. purchaser is not responsible for handing over of do/ds8 copies. 6)nfs - as per udm/manual ds8/lot inspection report. any other attachment, to be cut and hand over to custodian. any other nfs material in the lot other than items earmarked for sale, should be handed over to custodian at the time of delivery. purchaser should register delivery point request 3 days in advance.

Central Government/Public Sector

CTN :45592874

23 Jun, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - pl no.98050126- ferrous scrap consisting of condemned and unserviceable welding electrodes in full / cut , end bits of electrodes, with / without flux, of sorts and sizes with packing material. as is wheres is condition. note. flux removal is not permitted. removal of packing material is not permitted. approximate total weight of the packing material[wastage] is 120 kgs

Central Government / Public Sector

CTN :45576858

07 Jul, 2026 NA

Tirupati - Andhra Pradesh

Tender For mig/mag welding filler wire to irs-m-46-2020 solid, class-vi wire size-1.2mm grade er 308l as per specification :aws a5.9/5.9m:2017 net weight per spool not more than 12.50 kgs. note: the firm must submit the test certificate along with the material supply. ss wire spool for mig welding machine 308l 1.2 mm. compatible for champ multi 400. [ warranty period: 30 months after the date of delivery ] ]

CTN :45590727

27 Jun, 2026 NA

Jalpaiguri - West Bengal

Tender For supply of xlpe cable for working voltage up to and including 1.1 kv marked to is 7098 (part 1),lighting pole or post and hardware - tubular street light poles (v2),material and labour,testing,installation,repair,repair,welding,excavating in trenches,returning filling in,removing excavated material,material and labour,supply and laying,m l for,supplying and fixing,ml for cement,ml for pcc,disconnecting taking out,material and labour,testing,installation,repair,installation,electrical work

CTN :45577265

08 Jul, 2026 NA

Bardhaman - West Bengal

Tender For supply of welding cable of aluminium conductor, having nominal cross sectional area 95 sq.mm covering:- hofr, normal duty elastomeric compound, current rating:- 438 amp. at 60% duty cycle, (ambient air temperature at 30 degree c) conforming to 15: 9857-1990 (reaffirmed-2020) with amendment no.1, of jan. 2007 note: offered product to be supplied with material test certificate (mtc) & warranty test certificate (wtc) traceable to nabl [ warranty period: 30 months after the date of delivery ] ]

CTN :45388756

20 Jun, 2026 NA

Delhi - Delhi

Tender For corrigendum : supply of providing and fixing surf board size 1150x900x1250mm fabricated with main post of 114mm dia and 4 mm thick made up hot rolled tubular steel and hot dipped galvanized and powder coated 80- 100micron thick using akzo nobel /rapid or equivalent in desired shade and colour. all welding jonits of pipe shall be robotic welded with joints scallopped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all the welding points prior to finishing. all open ends of pipe to be closed with lldpe plastic caps, base plate cover shall be made of virgin lldpe plastic by rotational moulding with minimum 4mm thickness, uv resistant and colour as approved by engineer in charge. hight quality grip rubber should be used on handles. foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. maintenance free bearing should be used in the equipment’s manufactured by reputed company duly oil sealed and self lubricated to be approved by engineer-in- charge. the equipment shall be fitted within built limiters. the equipment shall be fixed on ground with concrete of minimum strength m-25 and j shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover, all complete as per directions and approval of engineer-in-charge regarding material, shape of equipment, colour (of metal, seat and pedal), providing and fixing rowing machine of size 1280x800x1150mm fabricated with main post of 114mm dia and 4 mm thick made up hot rolled tubular steel and hot dipped galvanized and powder coated 80- 100micron thick using akzo nobel /rapid or equivalent in desired shade and colour. all welding jonits of pipe shall be robotic welded with joints scallopped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all the welding points proir to finishing . all open ends of pipe to be closed with lldpe plastic caps, base plate cover shall be made of vrigin lldpe plastic by rotational moulding with minimum 4mm thickness,uv resistant and colour as approved by engineer in charge. hight quality grip rubber should be used on handles. foothold shall be maede of nylon alloy with rounded edges to prevent impact and injury. maintainance free bearing should be used in the equipments manufactured by reputed company duly oil sealed and self lubricated to be approved by engineer-in-charge. the equipment shall be fitted with in built limiters. the equipment shall be fixed on ground with concrete of minimum strenght m-25 and j shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover, all complete as per directions and approval of engineer-in-charge regarding material,shape of equipment, colour (of metal, seat and pedal), providing and fixing sky walker of size 850x800x1800mm fabricated with main post of 114mm dia and 4 mm thick made up hot rolled tubular steel and hot dipped galvanized and powder coated 80- 100micron thick using akzo nobel /rapid or equivalent in desired shade and colour. all welding jonits of pipe shall be robotic welded with joints scallopped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all the welding points proir to finishing . all open ends of pipe to be closed with lldpe plastic caps, base plate cover shall be made of vrigin lldpe plastic by rotational moulding with minimum 4mm thickness,uv resistant and colour as approved by engineer in charge. hight quality grip rubber should be used on handles. foothold shall be maede of nylon alloy with rounded edges to prevent impact and injury. maintainance free bearing should be used in the equipments manufactured by reputed company duly oil sealed and self lubricated to be approved by engineer-in-charge. the equipment shall be fitted with in built limiters. the equipment shall be fixed on ground with concrete of minimum

CTN :45533008

20 Jun, 2026 4.60 Lacs

Thiruvananthapuram - Kerala

Tender For one panchayath one playground - development of vankulathuvayal stadium in azhikode grama panchayath in azhikode lac, kannur -supply and installation of outdoor gym equipment - retender - open gym equipment, od405580/2025-2026 horse rider - supply and installation of horse rider having the following specifications: dimensions: (l x w x h) 1140 x 400 x 1400 mm. main frame - 114 mm od b class gi pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. foundation cover cap - dome shape of pp / nylon / hdpe material. remaining frame is made by 48 mm od b class gi pipe. seat frame is made by 48 mm od b class gi pipe. seat position must be horizontal to 110 -120 degree. link- made up of 48 mm od b class g.i. pipe. angle between link and ground position is 10-20 degree. handle - 33 mm od b class gi pipe. paddle vertical support - 60 mm od b class gi pipe. handle frame- 42 mm od b class gi pipe dually bending design. foot pipe - 33 mm od b class gi pipe. support frame 10 mm thick ms flat is used. seat- dimension 320 x 270 x 100 mm blow moulded wall thickness 4mm material hdpe. bearing bush closing cap pp / nylon / hdpe material. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing - use is 6005 permanent lubricated reputed brand. bearing bushes - 60mm od seamless pipe. pin made of 25 mm m.s. bright bar. grips - high quality rubber 46 mm od. circlips a 24 circlips are used for assembly. coating - best quality of powder coating 60 to 70 micron. safety instructions and exercise chart - start &finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od405586/2025-2026 leg press (double) - specifications: dimensions: (l x w x h) = 1676 x 400 x1500 mm. main frame - 114 mm od ?b? class gi pipe. foundation plate m.s. round plate of 250 mm &8 mm thick. foundations cover cap - dome shape of pp / nylon / hdpe material. link - is 60 mm od b? class gi pipe. seat frame - 42 mm od b class gi pipe. leg press back rest should be angled in 120 -130 degree. footrest - cast iron 124 x 296 x 5 mm thick and m.s plate of 2 mm thick use to support it. seat & back rest ? 380 x 275 x 60 mm thick high-density polyethylene (hdpe) blow molded with m10 integrated wall thickness 3 to 4 mm. link connected with frame by 8 mm thick laser cutting ms profile. top closing cap ? dome shape made by pp / nylon / hdpe material. closing cap?s- pp / nylon / hdpe material. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing- use is 6005 permanent lubricated reputed brand. pin 25 mm m.s. bright bar pin. bearing bushes - 60 mm od seamless pipe. circlip? a 24 circlips are used for assembly. coating - best quality of powder coating 80 -120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od405583/2025-2026 back extension - supply and installation of back extension having the following specifications: dimensions: (l x w x h) 1060 x 730 x 990 mm. main frame - made from 88 mm od b class g.i. pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. leg support - 42 mm

CTN :45533036

20 Jun, 2026 7.99 Lacs

Thiruvananthapuram - Kerala

Tender For one panchayath one playground- development of ezhikkara grama panchayath ground in paravur lac, ernakulam district- supply and installation of open gym equipment - retender - inauguration stone and interlock laying for open gym area, od34726/2026-2027 providing and fixing 18 mm thick gang saw cut, mirror polished, pre-moulded and pre polished, machine cut for inauguration granite stone of required size, approved shade, colour and texture laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) joint treated with white cement, mixed with matching pigment, epoxy touchups including rubbing, curing etc. complete at all levels. area of slab over 0.50 sqm, 16.21 engraving letters in hard stone, od419846/2025-2026 providing and laying of interlock concrete block pavements having thickness 60mm (m35) as per drawings and technical specification clause 1504 confirming to is 15658 and laid in required colour and pattern over and including 50mm thick compacted bed of 6 mm metal including edge concreting for 300mm width and 150mm depth with cc m35( @ 0.045 m3/m), supply and installation of open gym equipment, od27550/2026-2027 chest press (double) - supply and installation of double chest press having the following specifications: dimensions: (l x w x h) 1955 x 710 x 1900 mm. main center pipe - ø 114 mm od ?b? class gi pipe. foundation plate ?m.s. round plate of ø 250mm & 8 mm thick. foundations cover cap- dome shape of pp / nylon / hdpe material. remaining frame - made up of ø 48 mm od ?b? class g.i. pipe. handle - made up of ø48mm od ?b? class g.i. pipe. link - made up of ø 48 mm od ?b? class g.i. pipe. seat & back rest ? 380 x 275 x 60 mm thick high-density polyethylene (hdpe) blow molded with m10 integrated wall thickness 3 to 4 mm. bearing bush closing cap?s? pp / nylon / hdpe material. handle must be connected with frame by 8 mm laser cutting ms profile. top closing cap ? dome shape made by pp / nylon / hdpe material. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing - use is 6005 permanent lubricated reputed brands. pin ? made up of ø 25 mm m.s. bright bar pin. bearing bushes - ø 60 mm od seamless pipe. grips - high quality rubber ø 46 mm od. circlips?a 24 circlips are used for assembly. coating - best quality of powder coating 80-120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od30940/2026-2027 surfboard - dimensions: (l x w x h) 1090 x 890 x 1390 mm. main frame made from two pipes of ø 114 mm od b class gi pipe. foundation plate m.s. round plate of ø 250 mm & 8 mm thick. connecting pipe - ø 88 mm od b class gi pipe is used to connect both main frame pipes at top end and ø 42 mm pipe is used to connect at bottom end. handle - ø 42 mm and ø 33 mm od b class gi pipe. support pipe ø 60 mm must be used to support leg movement frame. leg movement frame ø 42mm od b class gi pipe. footrest - cast iron 325 x 270 x 8 mm thick and m.s. plate of 250 x 200 x 2 mm thick use for to support it. bracket - 8mm thick laser profile is used to support leg movement frame. top closing cap dome shape made by pp / nylon / hdpe material. closing caps pp / nylon / hdpe material. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. grips - high quality

CTN :45567362

09 Jul, 2026 NA

Kharagpur - West Bengal

Tender For flexible poly vinyl chloride (pvc) flooring sheet in rolls of size: 1850 mm width x 16.3 meter long x 2 mm nominal thickness for lhb ac coaches. material and specification : rdso's spec. no. rdso/2006/cg-12 (rev. 2); colour: as per rdso approved sample code: acflg-01. note: firm should supply compatible pvc welding electrode of length 2xwxl. [ warranty period: 72 months after the date of delivery ] ]

CTN :45380941

18 Jun, 2026 NA

Dimapur - Nagaland

Tender For bid to ras corrigendum : supply of shelter parts constr mtrls elect furniture and toold items for store shelter - shelter parts constr mtrls elect furniture and toold items for store shelter 2654 d d - socket outlet multipurpose 2 in 1 of 6 and 16 amps flush button type isi marked , modular socket outlet multipurpose 2 in 1 16 amps flush button type isi marked , surface mounting modular boxes suit for switches 12 module of size 8 inch into 6 inch , surface mounting modular boxes suit for switches 8 module of size 8 inch into 3 inch , combined cover plate with frame inner and outer of 12 module , combined cover plate with frame inner and outer of 8 module , cealing rose with square box 65 into 50mm 2 to 3 terminals , pvc flexible nibbed pipe 20mm dia , mcb db 06 way spn 240 volt conf to is 13032 , mcb 10 amp sp 240 volt breaking capacity 10 ka conf to iec 60898 , mcb 20 amp sp 240 volt breaking capacity 10 ka conf to iec 60898 , mcb 32 amp sp 240 volt breaking capacity 10 ka conf to iec 60898 , pvc casing caping 38mm wide not less than 2 mm thick , pvc coupler for 38mm casing and caping pipe , pvc tee for 38mm casing caping pipe , pvc sockets for 38mm casing caping pipe , pvc corner bend for 38mm casing and caping pipe , pvc elbow for 38mm casing caping pipe , pvc junction linker 75 into 75mm , house service bracket hook type complete with 3 mtr long gi pipe 40mm dia and ms hooks clamps ans stay , pvc conduct pipe 20mm dia isi marked , pvc coupler for 20mm dia coduict pipe , pvc elbow for 20mm dia conduict pipe , pvc space bar saddles for 20mm dia pvc pipe , insulation tape 19mm width 25mm long , no 8 into 19 csk screw full threaded , no 8 into 32 csk screw full threaded , no 8 into 50 csk screw full threaded , no 8 into 75 bolt and nuts full threaded , store rack as per specification given in appx c of ts , chair writing as per specification given in appx d of ts , writing table as per specification given in appx d of ts , almitrah steel large as per specification given in appx d of ts , hand held trolley as per specification given in appx d of ts , hand held fire extinguisher as per specification given in appx d of ts , smoke alarm as per specification given in appx d of ts , heat alarm as per specification given in appx d of ts , habd held grinder cutter 125 l professional rated input power 1800 w 11500 rpm 125mm disc dia make as per appx ii of ts , bosch grinder cutter blade 125mm dia make as per appx ii of ts , portable welding machine arc 220a built in hot start anti stick and adjustable arc force heavt duty make as per appx ii of ts , plaster 6 inches material wooden heavy duty wooden hand float trowel 10 inch into 6 inch polished wood plastering , plaster 8 inches material wooden heavy duty wooden hand float trowel 10 inch into 6 inch polished wood plastering , hand gloves masonery work flocked liner neoprene over latex coating safety gloves , spirit level 3 feet , spanner set no of spanner 8 size 6mm to 22mm generally conf to is 2028 to 2008 make as per appx ii of ts , plumbob with kanda and 2 mtr thread make as per appx ii of ts , iron tasala 10 kg capacity , iron bucket 15 ltr capacity , nylon rope , sintex 500 ltr thrree layer pvc water tank 500 ltr capacity make as per appx ii of ts , brick hammer weight 5 kg make as per appx ii of ts , ball pane hammer weight 1 point 35 kg make as per appx ii of ts , ms electrical tool kit make as per appx ii of ts , welding rod 60 pcs size 4mm into 450mm in one pkt , double wheel concrete trolley fabricated heavy duty ms sheet and ms frame with 80 to 100 ltr cap constr mtrls with loading cap upto 300 kg make as per appx ii of ts , drilling machine adopter make as per appx ii of ts , screw driver set make as per appx ii of ts , cutting plier make as per appx ii of ts , wire cutter make as per appx ii of ts , tester make as per appx ii of ts , revit //bid details 2 / 58 machine make as per appx ii of ts , revit 500 nos in one pkt , concrete mixer machine 230 ltr with 1 hp pure copp

Thermit Welding Spares Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector