Latest thermo paint Tenders | Government thermo paint Tenders

Central Government/Public Sector

CTN :45317842

15 Jun, 2026 NA

Murshidabad - West Bengal

Tender For supply of paint black , paint bus green , thinner , paint red oxide , paint white , paint rubber seal , paint blue , paint silver , paint red , paint yellow , paint orange , water paper 220 no , acrylic metal putty , putty blade

State Government

CTN :45290039

01 Jun, 2026 1.72 Lacs

Rohtak - Haryana

Tender For job no.1245/2026 (hew) work for repairing of children playing equipment and distempering on mature tree plants and providing and fixing of garden iron bench in pt. shri ram sharma park sector-13 at u/e rohtak with 06 months defect liability period - 11.66.1 interior finishing distempering with 1st quality acrylic distemper, having voc (volatile organic compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. 1 one coat, 26.58.3 supply and installation of garden bench 3 cast iron bench of 1800 mm length, 900 mm width, 450 mm seating height, sides made of cast iron. seat and back shall be made of 10 strips of m.s. pipes 63 mm x 25 mm of 14 gauge with one m.s. flat 25 x 10 mm welded at the centre, below and back of the seat and back rest. spray painted with approved brand paint. fixed by grouting with 1:2:4 cement concrete (minimum weight of each bench 105 kg). all materials required to be as per bis specifications., job work repair of children playing equipments. , job work repair of sea saw , job work repair of bridge ladder. , job work multiplay station repairing welding and new plastic slide and top roof fiber shade any colour.

Central Government / Public Sector

CTN :45076868

02 Jun, 2026 NA

Belgaum - Karnataka

Tender For corrigendum : supply of thinner f/enamel paint , two pack aliphatic acrylic polyurethane finish paint off white , zinc ethyl silicate primer is 14946: 2001 , two pack epoxy polyamide mio undercoat , enamel, synthetic, exterior (a) undercoating (b) finishing (v4) confirming to is 2932 , ready mixed paint, air drying, red oxide - zinc phosphate, priming as per is 12744

State Government

CTN :45310058

02 Jun, 2026 6.50 Lacs

Badaun - Uttar Pradesh

Tender For work of applying centre/edge line with thermoplastic paint on ushait kadarchauk via ghadia hardua patti tikri tatarupur (odr) road km 6, 17, 19, 20 under shekhupur vidhansabha.

State Government

CTN :45310075

02 Jun, 2026 17.00 Lacs

Badaun - Uttar Pradesh

Tender For work of applying centre/edge line with thermoplastic paint on ujhani khiriya wakarpur kakoda kadarchauk (odr) road km 1(850), 8 to 14, 15(900), 16, 17, 18(600) under shekhupur vidhansabha.

State Government

CTN :45310295

02 Jun, 2026 14.00 Lacs

Badaun - Uttar Pradesh

Tender For work of applying centre/edge line with thermoplastic paint on ujhani patparaganj bhuda bhadraul kudha shahpur kakoda (odr) road km 12, 16, 17(750), 18 to 20,21(600) under shekhupur vidhansabha.

State Government

CTN :45310296

02 Jun, 2026 17.00 Lacs

Badaun - Uttar Pradesh

Tender For work of applying centre/edge line with thermoplastic paint on dataganj ushait (odr) road km 7 to km 18 under dataganj vidhansabha.

CTN :45138683

27 May, 2026 1.26 Crore

Bathinda - Punjab

Tender For bid to ras corrigendum : supply and construction of superstructure of ug coy comd post , supply and construction material , supply and construction electronic , supply and construction of earthing items , supply and construction of lightening conductor , supply and construction of furniture items - cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112-1969 (make-birla gold/ambuja /ultratech/acc/jk/dalmiya) , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40 mm graded , hard core 63-90 mm , stone boulder 9 to 12" , mild steel bars of size 16 mm and above dia conforming to is 432 (part (1) 1982 (make tata/sail/jsw) , mild steel bars of size 12 mm and above dia conforming to is 432 (part 1) 1982 (make tata/sail/jsw) , mild steel bars of size 10mm dia conforming to 15 432 (part 1) 1982 (make tata/sail/jsw) , mild steel bars of size 8 mm and above dia conforming to is 432 (part 1) 1982 (make tata/sail/jsw) , water proofing compound confirming to is 2645-2003 (make pidilite/dr fixit/fevicol) , gl binding wire (tata/sail/jsw) , wooden plank for shuttering lind class wood of size 3.0x0.30x0.026 , wooden scantling various size , steel props of size 2 mtr long. 80 mm dia, adjustable upto 4 mtr height nad as directed , nails various sizes , (a) ms rhs of size 100x50x45 , (b) ms rhs of size 50x25x2.9 , (c) ms rhs of size 96x48x3.2 , (d) ms flat 40x5 mm thick for wind the tata/sail.jsw , (e) ms plate of size 10mm thick , idi ms plate of size 8mm thick , 10) m5 angle of size 40x40xň for cleat , (f) ms plate of size 12mm thick , ms nuts and bolts of length 100mm fully thread suitable for 10 mm dia mats including two numbers of washers and 25mm of shank and two nos of washers 3 mm thick complete ali as directed , ppgi sheet, 0.55 mm thick of size 10ft x3 ft of make sail/tata/jindal incl treating galvanised surface with mordant solution and two coat of synthetic camoglage paint over one coat of red oxide primer of make berger/asian/nerolac) , ppgi noge sheet of 0.50mm thick of 90cm wide of make sail/tata/jindal incl treating galvanised surface with mordant solution and two coat of synthelic camoglage paint over one coat of red oxide primer of make(berger/asian/nerolac) , self taping steel screw half thread with rawl plag of 1 1/2 size (is! marked) (100 nos/pkt) , door size (2000x1000mm double wal ms sheet for door (2mm thick) frame (chowkat) made of steel equal angle iron 55x55x6mm (151 grade) shutter made up of steel equal angie iron frame 35x35x5mm (151 grade) flat con for stiles (75mm width and 5mm thick) holdfast 450mm long welded either side of anglle iron frame including hinges (06 nos) , tower bolt 150mm long 104 nos: bow handles (04 nos) and sliding bolt 12mm dia 300 mm long with lockung arrangernent complete both side and openable outside complete along the wall. , note the door shall be made of steel suitable painted in olive green colour with two coats of red oxide primer , ventilator with grill of size (1500 x 600mm) ventilator (loop hole) frame for steel angle of size 35x35x5mm (1s1 grade) gral made of tmt bar 12mm dia with weiding the items shall be suitably painted with weather resistance and fire prouf paint over one coat of red uxide primer (make tata/spat/sail , acrylic emulsion paint of approved brand on new concrete surface of make berger/asian/nerolag , painting brush 4"(15) marked) , bila white wall care putty (water resistant white cement based putty) for concrete/mortar walls/ceiling make jk putty birla white , cerment hased paint snowcemi make berger/nemlac/asian) , o bound distemper (washable quality) of proprietary brand of (make , ceramic tiles of size 600 mm x 600 mm for floor thickness between 9 to 10 mm thick make (johnson kajana orient) tist quality confrorning to 15 150-2006 , white cement confirming to 18 8042/1969 (make acc/birla white ambuja) , curtain arrangement drapery and ind made of 25 mm dia and 1600 mm long pre coated ms pipe with fancy type end

CTN :45288199

06 Jun, 2026 10.00 Lacs

Satna - Madhya Pradesh

Tender For supply of lok nirman samagri for f.y. 2026-27 - opc cement, ppc cement, khajuraho sand, son sand, local potter-made bricks, allahabad chimney bricks, chimney bricks (20x10x20 cm), stone blocks (20x20x10 cm), 40mm crushed gravel, 20mm crushed gravel, 10mm crushed gravel, 6mm crushed gravel, crushed stone dust, hard kankar (nodular lime), soil, stone slabs (20mm), stone slabs (30mm), stone slabs (40mm), stone dasas (100mm), shuttering (columns/beams, etc. – iron/plywood), shuttering (roof – iron/plywood), shuttering (roof – wood), tensile steel rebar (10mm dia), tensile steel rebar (12mm dia), tensile steel rebar (16mm dia), tensile steel rebar (20mm dia), binding wire, mesh netting (size: 25x25mm), chain link fencing, fencing wire (6mm bar / g.i. barbed wire), m.s. grills and meshwork, lime, white cement, distemper (for wall painting/finishing), red oxide (for painting iron/metal materials), varnish (for painting/finishing wood materials), paint (emulsion/iss/ssd/asian deluxe), turpentine oil, concrete pole (0.1 x 0.1 x 1.5m), concrete pole (0.1 x 0.1 x 0.6m), 300mm. 450 mm dia. cement concrete pipe np4 (2.5 kg/cm²), 900 mm dia. cement concrete pipe np4 (2.5 kg/cm²), 1200 mm dia. cement concrete pipe np4 (2.5 kg/cm²), 600 mm dia. cement concrete pipe np4 (2.5 kg/cm²), 300 mm cement concrete pipe np3 (2.50 kg/cm²), 450 mm cement concrete pipe np3 (2.50 kg/cm²), 600 mm cement concrete pipe np3 (2.50 kg/cm²), painting brush 2-inch, painting brush 4-inch, high-quality plastic bucket 5-liter, translucent acrylic plastic sheet (3 mm thick), paver block (80 mm x 100 mm), wall putty.

Central Government/Public Sector

CTN :45281601

18 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For annual sectional contract for repairs & maintenance work and supply of material under aden/ hq-ii /jhs for year 2026-27 a) zone no-2a-2 jhs (railway station & circulating area) b) zone no-2a-3 jhs - stone aggregate (single size): 10 mm nominal size, bitumen emulsion, portland cement (opc-43 grade), white cement, c.p. brass extension nipple (15mm x 50 mm), oxidised mild steel butt hinges 125x65x2.12 mm, oxidised mild steel butt hinges 100x58x1.90 mm, anodised aluminium butt hinges 100x63x3.2, anodised aluminium sliding door bolt 250x16 mm, anodised aluminium tower bolt (barrel type) 200x10 mm, anodised aluminium tower bolt (barrel type) 150x10 mm, anodised aluminium handles 125 mm with plates 175 x 32 mm, satna lime, acrylic distemper 1st quality, haing voc content less than 50 grams/liter, premium plastic acrylic emulsion of interior grade, having voc content less than 50 grams/liter, aluminium paint, synthetic enamel paint in black or chocolate shade, synthetic enamel paint in all shades except black or chocolate shade, coursed sand (zone iii), structural steel such as tees, angles channels and r.s. joists, galvanised steel or l hooks 8 mm dia, bolts and nuts up to 300 mm in length, 18 mm dia c.p. brass/ s.s. jet with flexible tube upto 1 metre long with s.s. tringular plate for eureopean type w.c., mirror of superior make glass 60x45 cm, pig lead, gl pipes 15mm dia, gl pipes 20 mm dia, gl pipes 25mm dia, gi union 15mm nominal bore, gi union 20mm nominal bore, gi union 25mm nominal bore, gi union 50mm nominal bore, white plastic seat isolid) with lid c.p. brass hinges and rubber buffers, shower rose c.p. brass for 15 to 20 mm inlet 100 mm dia, shower rose c.p. brass for 15 to 20 mm inlet 150 mm dia, h.p. or l.p. ball valve with polythene floats: 15mm dia, h.p. or lp. ball valve with polythene floats: 20 mm dia, h.p. or lp. ball valve with polythene floats: 25 mm dia, full way valve with c.i. wheel (screwed end) brass 125 mm dia, brass full way valve with c.i. wheel (screwed end) 50 mm dia, vitreous china flat back wash basin 550x400 mm, c.p. brass waste 32 mm, c.p. brass waste 40 mm, vitreous china orrisa type w.c. pan of size 580 mm, vitreous china pedestal type water closet, ply wood 5 ply with commercial ply on both faces 6 mm thick, 12 mm commercial ply, common burnt clay f.p.s (non modular) bricks class designation 7.5, weather sealant -non staining (600 ml), c.i. sluice valve (with caps) class ii: 100 mm dia, c.i. sluice valve (with caps) class ii: 150 mm dia, red oxide zine chromate primer, gp-2 cememtitious compound, galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of wire 0.63 mm, frosted glass sheet of nominal thickness 4 mm (wighting not less than 10kg/sqm), aluminium hanging floor door stopper with twin rubber & stopper, hydraulic door closer tubular type aluminium section body, semi rigid pvc waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c pvc waste fittings, bottle trap, cp brass single lever telephonic wall mixer of approved make, u-pvc pipes (working pressure 4 kg/cm²) single socketed pipe 75 mm dia, u-pvc pipes (working pressure 4 kg/cm²) single socketed pipe 110 mm dia, upvc bend 87.5° 75 mm bend, upvc bend 87.5° 110 mm bend, c.p. brass bibcock 15 mm, c.p. brass long nose bibcock 15 mm, c.p. brass long body bibcock 15 mm, c.p. brass stop cock (concealed) 15 mm, c.p. brass angle valve 15 mm, binding wire, flushing cistern p.v.c. 10 litre capacity (low level-white) with fittings, accessories and flush pipe, white vitreous china clay half stall urinal flat back 580x380x350 mm or angle back 450x375x350 mm with waste fittings as per is:2556, 15 mm ptmt bib cock, 15 mm dia ptmt stop cock (male thread), ptmt pillar cock, ptmt push cock 15 mm dia, ptmt pillar cock (fancy) 15 mm foam flow, turpentine oil, 15 mm nominal bore and 45 cm length pvc connection pipe with p.t.m.t. nuts, sbr polymer, premium acrylic exterior paint(p.way training center)

Thermo Paint Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors