Latest thermo plastic paint Tenders | Government thermo plastic paint Tenders

Corporations And Associations And Others

CTN :45523190

19 Jun, 2026 4.76 Lacs

Delhi - Delhi

Tender For provision of new led street lights with allied accessories on existing poles at various dark spots in saidulajab ward no 160 under south zone - led street light fixture, powder coated pressure die cast aluminium body (system lumen efficacy >135 lm/watt). supplying, installation, testing & commissioning of street light led fixture, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with driver efficiency >85%, input voltage: 140-270 volt ac, frequency 50/60 hz, operating temp range -5 0c to 50 0c, internal surge protection of 5 kv l,n,e as per iec 61000-4-5, driver efficiency >85%,thd 10% as per iec 61000-3-2, p. f. 0.95, ip-66,ik-10, cri >70, under voltage and over voltage protection, emi-emc as per cispr-15, lenses for beam angle as per iesna type i/ii/iii as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (led,driver & electrical circuitary) of minimum 50000 burning hours with 70% of initial lumen maintained till life ends as per lm80 extrapolation ies tm-21-11 report, cct 3000 k / 4000 k / 5700 k /6500 k (as per ansi bin), sdcm(standard deviation color matching)5, maximum power consumption should not more than the specified rating and fixture shallbe of relevant bis standard complete in all respect i/c external connections with 1.5 sq mm frls/hffr, pvc insulated copper conductorsingle core cable and earthing etc. as required withminimum 5 year oem warranty. system lumen efficacy >135 lm/watt output . lm79 & lm80 testreport and all testing required for led fixturesas per bis shall be submitted.. shape size and cct shall be as approved by engineer-in-charge asper requirement. (thermal management: heat sink of aluminium housing such that led junction temperature shall not rise above 90 c). 45 watt , supply and fixing of 32mm dia x 1 meter long g.i. pipe (medium class) bracket for mounting of fluorescent/hpmv/hpsv street light fitting on pole including bending the pipe to the required shape , 2 nos 25mm x 6mm flat iron clamps with nuts, bolts and washer , painting the flat iron with primer and finish paint etc. as reqd, supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required. 3 x 1.5 sq. mm, supply of xlpe insulated pvc sheathed al. conductor un-armoured cable 1.1kv grade conforming to is-7098 of following size:-2c*4 sqmm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required. upto 35 sq. mm

Corporations And Associations And Others

CTN :45523194

19 Jun, 2026 4.67 Lacs

Delhi - Delhi

Tender For provision of led light fittings with accessories at various locations in ward no. 167 khanpur, under south zone. - supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required. 3 x 1.5 sq. mm, supply and fixing of 32mm dia x 1 meter long g.i. pipe (medium class) bracket for mounting of fluorescent/hpmv/hpsv street light fitting on pole including bending the pipe to the required shape , 2 nos 25mm x 6mm flat iron clamps with nuts, bolts and washer , painting the flat iron with primer and finish paint etc. as reqd., supply of xlpe insulated pvc sheathed al. conductor un-armoured cable 1.1kv grade conforming to is-7098 of following size:-2c*4 sqmm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required. upto 35 sq. mm, led street light fixture, powder coated pressure die cast aluminum body (system lumen efficacy 135 lm/watt) supplying, installation, testing & commissioning of street light led fixture, powder coated pressure die cast aluminum body with built in or separate driver as per the requirement with driver efficiency >85%, input voltage: 140-270 volt ac, freq 50/60 hz, operating temp range -5 deg centigrade to 50 deg centigrade, internal surge protection of 5 kv l,n,e as per iec 61000-45, driver efficiency >85%,thd 10% as per iec 61000-3-2 , p. f. 0.95, ip66,ik-10, cri 70 , under voltage and over voltage protection,emi-emc as per cispr-15, lenses for beam angle as per iesna type i/ii/iii as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (led,driver & electrical circuitry) of minimum 50000 burning hours with 70% of initial lumen maintained till life ends as per lm80 extrapolation ies tm-21-11 report , cct 3000 k / 4000 k / 5700 k /6500 k (as per ansi bin) , sdcm(standard deviation color matching) 5, maximum power consumption should not more than the specified rating and fixture shall be of relevant bis standard complete in all respect i/c external connections with 1.5 sq mm frls/hffr, pvc insulated copper conductor single core cable and earthing etc. as required with minimum 5 year oem warranty. system lumen efficacy 135 lm/watt output . lm79 & lm80 test report and all testing required for led fixtures as per bis shall be submitted. shape size and cct shall be as approved by engineer-in-charge as per requirement. (thermal management: heat sink of aluminum housing such that led junction temperature shall not rise above 90 c). 45 watt

CTN :44877248

20 Jun, 2026 1.98 Crore

Srinagar - Jammu And Kashmir

Tender For corrigendum : providing, laying and compaction of readymade bituminous mix for bm 50mm, bc 40mm thick and rd marking with thermoplastic paint for resurf works bet km 286.110 to km 290.75 on jammu srinagar road under 122rcc 32tf project beacon in jk

CTN :44457683

20 Jun, 2026 1.41 Crore

Srinagar - Jammu And Kashmir

Tender For corrigendum : providing, laying and compaction of readymade bituminous mix for bm 50mm, bc 40mm thick and rd marking with thermoplastic paint for resurf works bet km 19.7 to km 25.0 on banihal old alignment road under 52rcc 760tf project beacon in jk - providing, laying and compaction (with sensor paver) of ready made bituminous (hmp) mix for bituminous macadam (bm) 50 mm thick (compacted), bituminous concrete (bc) 40 mm thick (compacted) and road marking with thermoplastic paint for resurfacing works between km 19.700 to km 25.000 on banihal old alignment road under 52 rcc sector / 760 brtf project beacon in j&k state (ut)

CTN :44509654

20 Jun, 2026 4.44 Crore

Srinagar - Jammu And Kashmir

Tender For corrigendum : resurf works bm 50mm, bc 30mm and road marking different loc bet km 2.158 to km 14.128 on hln rd part-i and bm 50mm, bc 40mm and road marking bet km 0.00 to km 12.80 on nrtg rd part-ii under 99rcc 760tf project beacon in jk - providing, laying and compaction (with sensor paver) of ready made bituminous (hmp) mix for bituminous macadam (bm) 50 mm thick (compacted), bituminous concrete (bc) 30 mm thick (compacted) and road marking with thermoplastic paint between km 2.158 to km 2.253, km 3.940 to km 4.165, km 5.540 to km 10.090, km 10.650 to km 12.000 & km 13.200 to km 14.128 on handwara-lach naugam road (part-i) and bituminous macadam (bm) 50 mm thick (compacted), bituminous concrete (bc) 40 mm thick (compacted) and road marking with thermoplastic paint from km 0.00 to km 12.800 on naugam-radha-tutmari gali road (part-ii) for resurfacing works under 99 rcc sector / 760 brtf project beacon in j&k state (ut)

CTN :44487918

20 Jun, 2026 2.09 Crore

Srinagar - Jammu And Kashmir

Tender For corrigendum : providing, laying and compaction of readymade bituminous mix for bm 50mm, bc 30mm thick and rd marking with thermoplastic paint for resurf works bet km 0.00 to km 13.559 on gulmarg asha road under 99rcc 760tf project beacon in jk - providing, laying and compaction (with sensor paver) of ready made bituminous (hmp) mix for bituminous macadam (bm) 50 mm thick (compacted), bituminous concrete (bc) 30 mm thick (compacted) and road marking with thermoplastic paint between km 0.000 to km 13.559 on gulmarg asha road for resurfacing works under 99 rcc sector / 760 brtf project beacon in j&k state (ut)

CTN :44487924

20 Jun, 2026 1.17 Crore

Srinagar - Jammu And Kashmir

Tender For corrigendum : providing, laying and compaction of readymade bituminous mix for bm 50mm, bc 40mm thick and rd marking with thermoplastic paint for resurf works bet km 47.0 to km 50.5 on ramban gul road under 52rcc 760tf project beacon in jk - providing, laying and compaction (with sensor paver) of ready made bituminous (hmp) mix for bituminous macadam (bm) 50 mm thick (compacted), bituminous concrete (bc) 40 mm thick (compacted) and road marking with thermoplastic paint between km 47.000 to km 50.500 on ramban gul road for resurfacing works under 52 rcc sector / 760 brtf project beacon in j&k state (ut)

CTN :45565126

20 Jun, 2026 3.82 Lacs

Mumbai - Maharashtra

Tender For providing and applying thermosplatic paint at the junction of barkat ali road in beat no 180 in f/north ward

CTN :45437446

17 Jun, 2026 NA

Shimla - Himachal Pradesh

Tender For bid to ras supply of gi bend 50mm , gi elbow 15mm , gi elbow 20mm , gi elbow 25mm , gi elbow 50mm , gi elbow reducer 20x25mm , gi elbow reducer 25x40mm , gi elbow reducer 40x50mm , gi elbow reducing 20 x 15mm , gi elbow reducing 25 x 15mm , gi nipple 15mm x 100mm , gi nipple 15mm x 150mm long , gi nipple 20mm x 50mm , gi nipple 15mm x 50mm long , gi nipple 20mm x 100mm long , gi nipple 20mmx150mm long , gi nipple 25 mm x 50 mm long , gi nipple 25mm x 100mm long , gi nipple 25mmx150mm long , gi nipple 40mm x 100 mm long , gi nipple 40mm x 50 mm long , gi nipple 40mmx150mm long , gi nipple 50mm x 100mm long , gi nipple 50mmx150mm long , gi plug 50 mm , gi plug 15 mm , gi plug 20 mm , gi plug 25 mm , gi socket 25mm , gi socket 15mm , gi socket 20mm , gi socket 40mm , gi socket red 40 x 15mm , gi socket reducer 15 x 20mm , gi socket reducer 25x20mm , gi socket reducing 15x20mm , gi socket reducing 25x15mm gi , gi tee eqal 20mm gi , gi tee eqal 25mm gi , gi tee eqal 40mm gi , gi tee equal 15mm gi , gi tee equal 80 mm isi maked , gi tee reducer 25x40mm , gi tee reducer 50x25mm , gi tee reducer 50x40mm , gi tee reducing gi 20x15mm , gi tee reducing gi 25x15mm , gi tee reducing gi 25x20mm , gi union 15mm , gi union 20mm , gi union 25mm , gi union 40mm , gi union 50mm , handle for almirah steel large or medium , helical door closer , helical door spring steel 150mm , hexa blade double edge 12 inch , hinges but steel 100mm , hinges but steel 50mm , hinges but steel 75mm , hinges butt aluminum 75mm , ht tape for 11 kva make scotch , indicating lamp for geyser , mixture for wash hand washbasin wall mixer , modular bell push 6a , modular socket 2 point 5 amp 2 pin , modular socket 6 amp 5 pin , modular socket 6 or 16 amp 6 pin , multisocket 6 amp 5 pin , nails wire 25mm , nails wire 40mm 14swg , nails wire 75mm 12swg , non return valve 100mm , non return valve 50mm , nut and bolt 3 inch long and dia 05mm , nylon newar , oil putty for glazing , one way switch 5a , onload changeover switch 200 amps with steel enclasure tpn , pillar cock pvc 15mm , pink primer for wood , plate rack stainless steel 1050x600x200mm , plate rack stainless steel 1050x600x250mm , ply wood teak face 8 x 4 x 6mm , ply wood commercial 6 x 3 x 12mm , ply wood commercial 8 x 4 x 3mm , ply wood commercial 8 x 4 x 6mm , plywood 1 side t or f 8x4x4mm , plywood commercial 8x4x4mm , plywood commercial bwr 8x4x12mm , plywood commercial bwr grade 8x4x18 mm thick , plywwood teak face 6x3x9 mm , polythene connection 450 x 15mm with nut and washer , polythene connection 600 x 15 mm with nut and washer , polythene connection 900 x 15 mm with nut and washer , pre laminated board 2440 x 1220 x 18mm or 19mm , premix readymade mixture for road brush paint flat 150mm, brushes paint flat 125mm, brushes paint flat 25mm, brushes paint flat 75mm, cable flexible copper conductor 1 point 5 sqmm single core , cable pvc copper conductor 2 point 50 sqmm 3 core, cement in plastic bag 50kg each, changeover switch 400 amp 4pole, changeover switch 63 amps 4 pole, clamp for pvc pipe 100mm, cloth green baize , cloth malmal, corner shelf 5 inch, coupling cp brass 32mm for sink, cp connection 600 x 15mm with brass coupling and nut and washer, door seal strip aluminium 1 mtr wide, dwc hdpe pipe 100mm, dwc hdpe pipe 40mm, dwc hdpe pipe 50mm, dwc hdpe pipe 80mm, elbow 3 way 32mm gi, extension nipple cp brass 15 mm, fan electronic regulator step or capacitor type 100 watt two module, fan regulator modular type 100 w for //bid details 2 / 112

CTN :45560455

22 Jun, 2026 8.20 Lacs

Multi City - Andhra Pradesh

Tender For providing standard lane marking in main roads from bairagipatteda arch to mgm school, spw free left to rallapalli circle with thermo plastic paint under zone-3.

Thermo Plastic Paint Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Corporations And Associations And Others

Corporations And Associations And Others