Latest thermo plastic paints Tenders | Government thermo plastic paints Tenders

Central Government/Public Sector

CTN :45365796

04 Jul, 2026 11.50 Lacs

Jammu - Jammu And Kashmir

Tender For corrigendum : repair resurfacing of certain roads and connected items at bd bari mil stn - m&l preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with wire brush/brooms and finally fanning the cleaned surface with gunny bags or by mechanical blower to remove all loose dirt etc to black top surfaces, and applying evenly a priming/tack (viscosity grade paving bitumen of grade vg-10) @ 5 kg per 10 sqm to road surface bituminous asphaltic semi dense concrete consolidated thickness 30 mm with stone chippings graded aggregate with 5.5% of binder content by weight of total mix, (viscosity grade paving bitumen of grade vg-30) and 4% stone dust conforming to required specification for filler as per irc-95, 1987 (filler) by weight of mix, prepared in hot mix plant, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and rolled with 8 to 10 tone power roller completed all as specified and as directed., m&l for repair to potholes, any depth ,not exceeding 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, path etc, cutting around edges to at least 25mm in depth, making good by filling in screened and graded road metal, watering and well ramming, applying tack coat with (viscosity grade paving bitumen of grade vg-10) @ 10.0 kg per 10 sqm of surface putting in & including premixed bituminous macadam, well rammed and sealed with binder 9.80 kg/sqm, blinded with 0.09 cum of stone chippings, 6.3mm size and again well rammed, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and using with 8 to 12 tonne power roller (including supply of premixed macadam, binder and chippings),completed all as specified and as directed., premix bituminous macadam laid / rolled and compacted using 8 to 12 tonne power roller to required gradient and camber, with broken stone graded aggregate with 4% of paving bitumen binder of viscosity grade vg-30 grade by weight of toal mix (consolidated thickness 75mm or less) completed all as specified and as directed., m&l providing and laying at or near ground level factory made kerb stone of m-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required completed all as specified and as directed., m&l for marking lines 2.5 mm thick, dashes arrows etc of any description n. exc 10cm width/girth on road surface using hot applied thermo plastic road marking paint of approved colour confirming to bs-3262-1989 with special applicator machine all as per manufacturere instruction completed all as specified and as directed., supply and fix solar cat eye (green/red) aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency mono rystafie solar panel 2.4v/ 0.3 watt one ni-ed rechargeable battery (1.2v/ 1600ma) consisting of super bright led with 10,000 to 18,000 mcd completed as per manufactures instructions etc completed all as specified and as directed., supply and fixing metal tubular dealineator made out of abs round body fitted with 2 nos 65 mm dia highly reflective reflectors made out of and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in pcc 1:2:4 (150x150x300mm) type b1 complete all as specified and directed, s&f manufacturing, supplying and fixing retro reflective mandatory/ regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fu

State Government

CTN :45671572

30 Jun, 2026 NA

Morena - Madhya Pradesh

Tender For procurement of miscellaneous items - materials required for departmental construction work, iron (rebar) (isi marked) 6mm, 8mm (thermo-mechanically treated [tmt]), iron (rebar) (isi marked) 10mm, 12mm (thermo-mechanically treated [tmt]), iron (rebar) (isi marked) 16mm (thermo-mechanically treated [tmt]), cement (isi standard) 50 kg bag, major plant (acc, ultratech, ambuja, birla, jk, dalmia, etc.) – grade 43, grade 53, stone boulders (khanda) 8x8 inch / 18-20 cm coarse aggregate, black crushed stone (aggregate): 6mm to 12mm, crusher dust, brick (chimney-fired), size 9"x4"x3"; water absorption not to exceed 25% and crushing strength not less than 20%, flooring and wall tiles (vitrified/ceramic/glazed); thickness 2.0mm; water absorption not to exceed 0.05%; conforming to is:15622; all colors/shades/finishes, black crushed stone: 20mm to 40mm, red murrum (coarse grade), window/door frames (sal/beeja/saku wood), window/door shutters (veneered flat-pressed three-layer graded wood particle board); conforming to is:3097 grade-1, aluminum window sliding tracks (glass and mesh fittings; 5mm glass thickness), door frame, प्रम 100 उुग 50 उुग 1.6 उु चत्वपिसम ब्व व 1.6 उु जीपबा पेदहस्म तमिंजम पा 4351 उदनाम्बिजन्तमक तिवु ब्वुुमत्पंस उपसक जम्मस सेम्मज़्ष, श्ल्प चप्चम 32 उु क्प लंस अंद्प्रमक प्तवद चप्चम पप दंता, chamat pai 1239 mpv jeep badamme 2.8 mph, श्ल्प चप्चम 65 उु क्प लंस अंद्प्रमक प्तवद चप्चम पप दंता, chamat pai 1239 mpv jeep badamme 2.8 mph, भच्चम चप्चम प्रम् 50 वु क्प प्प डप्पडपुनू जीपबदमे 3 वु, प्पतम प्रप्रम 4.0 वुन्यु उनस्जपेजतंदक सिंज बिन्सम 3 वत्मम विचिचमत पुतम्, kota stone 20 mm 40 mm, granite 20mm thick, marvel 20mm thick, fan-shaped concrete paver block, 60 mm thick, fan-shaped concrete paver block, 80 mm thick, centering and shuttering (rental), binding wire (gi wire), acrylic distemper (isi marked), plastic emulsion paint (isi marked), oil-bound distemper (isi marked), cement primer (isi marked), oil paint (isi marked), wall putty (isi marked), pvc hd pipe, 0.5" & 1" (isi marked), pvc hd pipe, 1.5" (isi marked), pvc hd pipe, 4" (isi marked), pvc hd valve, 0.5", 1", & 1.5" (isi marked), pvc socket, 4" (isi marked), pvc hd elbow, 0.5" (isi marked), pvc hd elbow, 1" & 1.5" (isi marked), pvc hd elbow, 4" (isi marked), brass valve, 0.5" & 1" (isi marked), gi elbow, 0.5" & 1" (isi marked), gi socket 0.5a 1 padb (pap mark), steel spout 0.5 pdb (papp mark), long nose tape 0.5 pb (pap mark), मैजमट्ड ब्वुवक्म प्रम 360 गुग्475 गुग्395 वु.जप.हमतु थसन्वत्व चिस्लुमत विन्जमक उन्जमत बस्वेमज मन्त्वचमंद जल्चम अंबंध प्रम प्रूपजी व्सपक चविसल चत्विचमसल्दम उक्म वेजी बस्वेम् मंज वामत, ग्रेनी इप्डम फ्रैम 570 गी 470 गी 190 गी पुजी संस पिजजपड़ा दक्जनत्मे, pvc water tank 3 layer(pap mark), light fitting copper wire (1mm, 1.5mm), light fitting copper wire (2.5mm), light fitting copper wire (4mm), 3 pin socket 6.dutch (pap mark), 5 pin socket 6.dutch (pap mark), switch 6.dutch (papp mark), indicator light (pap mark), fan regulator (pap mark), power plug 16.dutch (papp mark), switch 16.dutch (papp mark), fuse socket(pap mark), holder (pap mark), sealing rose (pap mark), mcb (pap mark), main switch (papp mark), pvc board 8mm x 4mm x 12mm x 4mm x 4mm pvc casing (isi mark), ceiling fan 48-inch (isi mark), tube light complete 20 watt (isi mark), led bulb 10 watt (isi mark), led 15 watt (isi mark), iron pipe 2x2 inch, iron pipe 1.5x1.5 inch, iron pipe 2x3 inch, profile sheet 0.4 mm, fertile soil, water tanker supply (capacity 5000 liters)

Corporations/Associations/Others

CTN :45662707

02 Jul, 2026 4.05 Lacs

Multi City - Karnataka

Tender For supply and maintenance of necessary materials for 7 pure drinking water units in bilagi town - item description: painting steel work with deluxe multi surface paint to give an even shade. two coat applied @ 0.90l/10 m² over an under coat of primer applied @ 0.80 l/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of engineer-in-charge.. (pwd sr v-2, 2023-24, item no-8.33.3, page no-46), item description: providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of engineer-in-charge..:(pwd sr 2023-24 / volumme ii / i.no-8.3.2 /p.no-41), item description: supplying and fixing rolling shutters of approved make, made of required size m.s. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to is: 4454 - part 1 and m.s. top cover of required thickness for rolling shutters. 80x1.25 mm m.s. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the engineer-in-charge.(csr 2023-24 v-2 itm no.11.6.1 pg 78), item description: dismantling tile work in floors and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of engineer-in-charge. for thickness of tiles 10 mm to 25 mm (pwd sr 2023-24 / volumme ii /i.no-19.22.1 /p.no-189), item description: providing and laying cement concrete pavement with 1:2:4 for commercial & residential building floors, hardpaths, footpaths using 1 ce ment : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size, including finishing complete as per engineer incharge (pwd sr 2023-24 / volumme ii / i.no-9.4 /p.no-59), item description: flooring with 25mm thick polished shahabad slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, , including cost of materials, labour, curing, polishing complete as per specifications.(pwd sr 2023-24 / volumme ii / i.no- 9.35 /p.no-64), item description: providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered upvc (matching to ral-9016) sections and with minimum tio2 (titanium dioxide) at 6phr with tpe(thermo plastic elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with galvanized iron profile through-out the window frame. the outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and sash with overall size of 39mm x 75mm with gi reinforcement of 2mm and mesh sash of size 37mm x 58mm. coextruded glazing bead for fixing of glass shall be of size 20mm x 24 mm. windows shall be provided with 6mm plain float glass, standard hardware& multi point locking system with touch lock. wall thickness of frame & sash shall be of 2mm-2.5mm. maximum possible size 2419mm x 2200mm (the cost is inclusive of all fixtures and separate charges for minor t&p s shall not be made) (pwd sr 2023-24/volumme ii/i.no-12.90 /p.no-110), item description: providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel prime

CTN :45628776

22 Jun, 2026 42.78 Lacs

Delhi - Delhi

Tender For annual repair and maintenance of to goi press colony gpra qtrs at mayapuri new delhi during 2026-27 sh-supply of painting material for external finishing- anti-termite pesticides -(imidacloprid) , cement opc/ppc, , cement - white, , admixture for concrete, , reinforcement steel (thermo-mechanically treated bars (fe 550 d), , alccofine, , mechanical couplers for reinforcement, , ready mix cement concrete, , architecture expansion/seismic joint system, , expansion filler board premoulded compressible (non bituminous), , concrete curing compound, , core cutting, , expanded polystyrene sheet (eps), , soil anchor for diaphragm wall, , pvc water stop, , ready mix polymer jointing cement mortar, , glass brick/glass block, , all type of door lock, floor spring, door closer including mortice locks, , customised door window hardware /joinery fittings, , flush door shutter, , aluminium, , façade and window system, , fire stop in curtain wall system, , pop out vent for façade and system window hardware, , aluminium glass partition system, , aluminium openable louver, , air transfer grill, , fire rated glazed door, , metal fire rated doors, , wooden fire rated doors, , fire rated hardware & system, , fire seal, fire smoke seal, , fire rated glass, , fire rated rolling shutter, , fire curtain, , glass shower partition, , modular toilet cubical, , laminates, , compact laminate sheet, , polysulphide sealant/pu sealant, , glass & mirror, tinted glass,, , high performance glass, reflective glass, lacquered/back painted glass all superior quality, , silicone sealant, , polyester powder coating/pvdf coating, , wired glass, figured/pattern glass, , acoustic seal / door seal, , pvb/sgp laminate film, sentry film, , wood adhesive, , frosted film, , bmu/ façade cleaning system, , dry stone cladding undercut anchor, , stone sealer, , water & stain repellant coating for stone cladding and stone flooring, , gypsum lightweight plaster, , ready mix cement plaster, , crystalline integral, , waterproofing, , water proofing compound, , water proofing membrane (pvc/hdpe)/water, , proofing coating (pu/polyurea/ acrylic/elastomeric cementitious) / sri coating/pitch pu, , water stops - hydrophilic swellable rubber strip (non bentonite type), , polyurethane over deck insulation foam, , food grade epoxy coating for water tank, , vitrified tiles, , tiles/stone fixing adhesive/epoxy grout, , polyurethane concrete flooring, epoxy flooring, self leveling flooring, , wooden flooring and skirting, , raised/false access flooring system, , solid surface (corian), , car deck flooring system, , engineered marble, , rubberized sports flooring (gym flooring), , stainless steel, , structure steel & hollow section-primary producers only, , , , , , access panel in false ceiling system, acoustic panel, aluminium/metal ceilings (baffle and open cell ceiling), aluminum panels, anchor fastener, rebar, chemical/mechanical fastener, expandable fasteners, b, bonded particle board, cement fiber board/ cement, d, dry wall gypsum partition/paneling system for toilet, gypsum wall paneling, , , , , , , grg/gi suspended ceiling grid system & close/ c stud framing system, gypsum ceiling system (plain/perforated),, i c, non shrink cementious precision (anchoring) grout, paint - acrylic emulsion (exterior), paint - anti carbonation paint, paint - plastic emulsion (internal), paint - pu & epoxy paint and primer, paint - synthetic enamel, paint texture paints (interior), plywood (all plywood shall be procured from fully owned factory of the manufacturer and not from jv / outsourced), pu polish for wood work, rock wool/glass wool insulation, , , , , , ss modular railing system, steel (ms) rolled section & plate, steel hollow sections, t, tile trim/threshold, veneer, white cement based putty, soft board, , polycarbonate sheet/skylight, , c, , galvanized/galvalume roofing sheet and accessories d, , pre cast concrete landscape elements, gratings, kerb, drain cover, , preca

corporations/Associations/Others

CTN :45629173

23 Jun, 2026 7.99 Lacs

Ananthapur - Andhra Pradesh

Tender For providing of thermo-plastic paint for road margin markings at major roads ntr marg in ananthapuramu municipal corporation, anantapuramu.

CTN :45560451

22 Jun, 2026 6.37 Lacs

Tirupati - Andhra Pradesh

Tender For providing standard lane markings for main roads dbr road to chinthalachenu railway gate with thermo plastic paint for municipal roads in zone-1 area of municipal corporation, tirupati.

CTN :45560467

22 Jun, 2026 7.06 Lacs

Tirupati - Andhra Pradesh

Tender For providing standard lane marking in main roads from mr palli anna canteen to mr palli circle komalamma satram junction to police parade ground entrance with thermo plastic paint under zone-iii areas of municipal corporation, tirupati.

CTN :45560455

22 Jun, 2026 8.20 Lacs

Multi City - Andhra Pradesh

Tender For providing standard lane marking in main roads from bairagipatteda arch to mgm school, spw free left to rallapalli circle with thermo plastic paint under zone-3.

CTN :45560466

22 Jun, 2026 8.44 Lacs

Multi City - Andhra Pradesh

Tender For providing standard lane marking in main roads in guest line road to chintalachenu rly gate with thermo plastic paint under zone-6.

CTN :45560452

22 Jun, 2026 6.74 Lacs

Multi City - Andhra Pradesh

Tender For providing thermo - plastic paint to central line, side line marking, zebra crossing and providing signage boards at tataiahgunta gangamma temple road tuda road and tilak road under zone-2 area,

Thermo Plastic Paints Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Corporations/Associations/Others

corporations/Associations/Others