Latest thermodynamic steam trap Tenders | Government thermodynamic steam trap Tenders

CTN :44213311

22 Jun, 2026 NA

Kalpakkam - Tamil Nadu

Tender For bid to ras supply of pennant make ibr approved stainless steel thermodynamic steam traps of model pt11 and size 15 nb with flanged end connection , pennant make ibr approved stainless steel thermodynamic steam traps of model pt11 and size 20 nb with flanged end connection , pennant make ibr approved stainless steel thermodynamic steam traps of model pt11 and size 15 nb with screwed end npt connection , pennant make ibr approved stainless steel thermodynamic steam traps of model pt11 and size 20 nb with screwed end npt connection , pennant make ibr approved stainless steel thermodynamic steam traps of model pt11 and size 15 nb with socket weld end connection , spare disc and strainer screen set for pennant make thermodynamic steam traps of model pt11 and size 15nb , spare disc and strainer screen set for pennant make thermodynamic steam traps of model pt11 and size 20nb

Central Government/Public Sector

CTN :45589289

08 Jul, 2026 NA

Hyderabad - Telangana

Tender For load cell tension and compression range 50 kn , load cell tension and compression range 100 kn , displacement transducer (0 - 200 mm) , load cell tension and compression range 5000 n , load cell tension and compression 10000 n , load cell tension and compression range 20000 n

corporations/Associations/Others

CTN :45529614

26 Jun, 2026 NA

Bardhaman - West Bengal

Tender For tender for supply of spares for main turbine tsi and vms dstps -piezo velocity transducer , phase marker displacement sensors meter , vib x&y dispsensorvl202a08r 1012shinkawa , ext cable for phase marker displ sensors , shinkawa make driver model no vk 202a2 , rtr ex dis sen w cable vl263p50a102shink , ext cable rtr exp snsrvw 263pa 8shinkawa , driver mod of rotor exp hpt disp sensor , mounting bracket for ipt rotor expansion , driver ax shft ecc rel shft vibr , ecc snsr model vl 202a08r 2012 shinkawa , ext cable for ecc rel shaft vibration

CTN :45465678

19 Jun, 2026 NA

Kanchipuram - Tamil Nadu

Tender For supply, installation and testing of electronic equipments - supply -ece lab equipments, single output regulated dcvariable power supply- input voltage: 230v / 50hz ac. output voltage: (0 30)v dc. output current: (0 2)a dc. protection circuit: over voltage, over current, and short-circuit protection. high efficiency: greater than 85%. low ripple and noise: less than 50 mv. digital display., dual output regulated dc variable power supply- input voltage: 230v/50 hz ac. output voltage: (0 30)v dc. output current: (0 2)a dc. protection circuit: over voltage, over current, and short-circuit protection. high efficiency: greater than 85%. low ripple and noise: less than 50 mv. digital display., function generator - frequency range: 0.1 hz to 5 mhz. display: 4 to 6 digit led display. output waveforms: sine, triangle, square, pulse, ramp. amplitude: 0 20 vpp. rise time: 100 ns. distortion: 1% within specified frequency range. power supply: 230 v ac 10%, 50 60 hz. output amplifier protection: short-circuit and 15 v, digital ic trainer kit with breadboard - +5 v dc, 1 a regulated power supply. 12 v dc / 15 v dc, 200 ma regulated power supply. solderless breadboard with minimum 840 tie- points,power distribution buses. zif (zero insertion force) ic sockets to accommodate 8 or 16 pin ics. logic input and output leds for output monitoring. 16 buffered led outputs. 16 debounced switch inputs. variable clock generator: 0.5 hz to 50 hz. single pulse output: 100 ms (buffered, positive and negative outputs). one seven-segment display with 4 bcd inputs. built-in logic switches. manual clock: debounced push-button (one pulseper press)., dc voltmeter(digital) - dc digital voltmeter - 3 digit led/lcd display, measurement range: 0 20 v dc,accuracy: class 0.5( 0.5 % full-scale), dc ammeter - dc ammeter digital - 3 digit led/lcd display, measurement range: 0 5 a dc,accuracy: class 0.5 ( 0.5 % full-scale), lvdttrainer kit - ac mains power supply: 230 v 10%, 50 hz. fixed regulated dc power supply: +5 v, 12 v / 500 ma. transducer: lvdt. lvdt displacement: 20 mm (40 mm total). displacement scale: linear 20 mm. displacement display: red color 3 digit led display. excitation frequency: 4 khz. excitation voltage: ac variable excitation voltage up to 5 v., strain gauge trainer kit - ac mains power supply: 230 v 10%, 50 hz metal foil strain gauge mounted on beam/cantilever. strain measurement under applied load. wheatstone bridge arrangement. instrumentation amplifiers with 3 digit display for strain / output voltage. table-top trainer with labelled panel. test points for signal measurement. built-in dc power supplies and wooden closed cabinet. supplied with patch cords and user manual., ask modulation and demodulation kit - message signal1:8-bit variable data,amplitude 5v. message signal 2:debounced data, amplitude low (0) and high (5 v). message signal 3:fixed data 25 khz, 12.5 khz, 6.25 khz, 3.12 khz,amplitude 5 v. carrier signal: sine wave, frequency 200 khz, amplitude 5 v. supply voltage (board): +12 v, +5 v dc. input voltage: 230 v ac, 50 hz. interface connectors: 2 mm banana socket., fpga trainer kit - must use industry-standard mid-range fpga device usb-jtag programmable, compatible with vivado ise (webpack). power supply: 5 v dc through usb or external adapter. on-board peripherals: leds, switches, push buttons, 7-segment display,clock source, gpio / pmod expansion ports, uart, vga / hdmi, usb- uart bridge, usb cable. user manual., measurement scale: a vertical steel meter scale, usually with (1mm) graduations, for precise deflection measurement., accessories: includes a set of slotted weights (e.g., (6times 50g) or similar sets) for incremental loading.

Central Government/Public Sector

CTN :45467555

15 Jun, 2026 NA

Chatra - Jharkhand

Tender For supply of mandatory spares for steam traps - thermodynamic steam trap, thermodynamic steam trap, thermodynamic steam trap, thermodynamic steam trap, inverted bucket steam trap, external y-type strainer

CTN :45475071

15 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For purchase of non-consumables for ece department - purchase, dual output regulated dc variable power supply input voltage: 230v/50 hz ac. output voltage: (0 30)v dc. output current: (0 2)a dc. protection circuit: over voltage, over current, and short-circuit protection. high efficiency: greater than 85%. low ripple and noise: less than 50 mv. digital display., function generator frequency range: 0.1 hz to 5 mhz. display: 4 to 6 digit led display. output waveforms: sine, triangle, square, pulse, ramp. amplitude: 0 20 vpp. rise time: 100 ns. distortion: 1% within specified frequency range. power supply: 230 v ac 10%, 50 60 hz. output amplifier protection: short-circuit and 15 v overload protection. dc offset: 0 to 10 v adjustable. attenuation: 0 to 60 db., dso (digital storage oscilloscope) bandwidth: 50 100 mhz. sampling rate: 1 gs/s. channels: 2 (minimum). power supply: 100 240 v ac, 50 60 hz. automatic measurements: vpp, vavg, vrms, frequency, period, vmax, vmin, rise time, fall time, +width, width, +duty, duty, etc. horizontal scale: 5 ns/div 50 s/div or equivalent. vertical resolution: 8 bits (2 channelssimultaneously). vertical sensitivity: 1 mv/div 10 v/div (at input). waveform math: +, , , , invert, fft, etc. waveform storage: 16 waveforms or equivalent. communication interface: usb host and usb interface. display: 7-inch color display or equivalent. input impedance: 1 m 2% || 20 pf. accessories: 2 passive probes (1x/10x)., digital ic trainer kit with breadboard +5 v dc, 1 a regulated power supply. 12 v dc / 15 v dc, 200 ma regulated power supply. solderless breadboard with minimum 840 tie points,power distribution buses. zif (zero insertion force) ic sockets to accommodate 8 or 16 pin ics. logic input and output leds for output monitoring. 16 buffered led outputs. 16 debounced switch inputs. variable clock generator: 0.5 hz to 50 hz. single pulse output: 100 ms (buffered, positive and negative outputs). one seven-segment display with 4 bcd inputs. built-in logic switches. manual clock: debounced push-button (one pulse per press)., lvdt trainer kit ac mains power supply: 230 v 10%, 50 hz. fixed regulated dc power supply: +5 v, 12 v / 500 ma. transducer: lvdt. lvdt displacement: 20 mm (40 mm total). displacement scale: linear 20 mm. displacement display: red color 3 digit led display. excitation frequency: 4 khz. excitation voltage: ac variable excitation voltage up to 5 v., strain guage trainer kit ac mains power supply: 230 v 10%, 50 hz metal foil strain gauge mounted on beam/cantilever. strain measurement under applied load. wheatstone bridge arrangement. signal conditioning and amplification circuit. instrumentation amplifiers with 3 digit display for strain / output voltage. zero and gain adjustment controls. provision for applying calibrated loads. table-top trainer with labelled panel. test points for signal measurement. built-in dc power supplies and wooden closed cabinet. supplied with patch cords and user manual.

CTN :45225555

12 Jun, 2026 17.30 Lacs

Nagpur - Maharashtra

Tender For corrigendum : supply of balluff linear displacement transducer part no. type btl5-s172-m0860-k-sr32 or equivalent subjected , balluff linear displacement transducer part no. btl7 s572 m1600 p s32 or equivalent subjected to fit , balluff make linear displacement transducer part no. . btl7 - s572 - m3750 - p- s32 or equivalent mak , balluff make linear displacement transducer part no. . btl7 s572-m1700-p-s32. or equivalent make sub- , balluff make linear displacement transduc- er, with part no. btl7-s572-m4000-p-s32 or equivalent make

Central Government/Public Sector

CTN :45395778

10 Jun, 2026 NA

Bhusawal - Maharashtra

Tender For (depth transducer) roller type line displacement sensor, equivalent to crcc partno.: 40102652, designation/drawing no.: xm3-780/dc10v/780mm/>0.5mm required for replacement on pctm machine. make: crcc/plasser/soyuz/rem technology. note: material supplied by firm should be fitted on machine without any modifications and all ports & mounting should match as per existing part on machine and all function of item should work successfully. note: authorized dealer certificate to be submitted with supply. [ warranty period: 9 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted:max 8 lacs ] ]