Latest thermoplastic paint Tenders | Government thermoplastic paint Tenders

State Government

CTN :45558196

22 Jun, 2026 NA

Medininagar - Jharkhand

Tender For supply of list of approved construction materials for the preparation of schedule of rates for the year 2026, basic rates of which to be approved by the state level schedule rate committee (materials should conform to relevant b.i.s., mord and mort&h specifications). the rates will be inclusive of royalty but exclusive of all taxes, g.s.t,overhead and contractor's profit. "rates are at source"quarry/ crusher plant. - stone boulder of size 150 mm and below at source quarry, supply of quarried stone 150-200 mm size for hand broken at source quarry, boulder with minimum size of 300 mm for pitching at source quarry, coarse sand i) at source, coarse sand ii) at source , fine sand at source quarry, moorum at source quarry, gravel/quarry spall at source quarry, granular material or hard murum for gsb works at source quarry, fly ash conforming to is:3812 (part ii & i) at hmp plant/batching plant/crushing plant, filter media/filter material as per table 300-3 (mort&h specification) at crusher., close graded granular sub-base material 53 mm to 9.5 mm/4.75mm at crusher., close graded granular sub-base material 37.5 mm to 9.5 mm at crusher. , close graded granular sub-base material 26.5 mm to 9.5 mm at crusher., close graded granular sub-base material 9.5 mm to 4.75 mm at crusher., close graded granular sub-base material 9.5 mm to 2.36mm at crusher., close graded granular sub-base material 4.75mm to 2.36mm at crusher., close graded granular sub-base material 4.75mm to 75 micron at crusher., close graded granular sub-base material 2.36 mm & below at crusher., stone crusher dust finer than 3 mm with not more than 10% passing 0.075 mm sieve at crusher., coarse graded granular sub-base material 2.36 mm & below at crusher., coarse graded granular sub-base material 4.75 mm to 75 micron at crusher., coarse graded granular sub-base material 4.75mm to 2.36 mm at crusher., coarse graded granular sub-base material 9.5mm to 4.75 mm at crusher., coarse graded granular sub-base material 26.5mm to 4.75 mm at crusher., coarse graded granular sub-base material 26.5 mm to 9.5 mm at crusher., coarse graded granular sub-base material 37.5 mm to 9.5 mm at crusher., coarse graded granular sub-base material 53 mm to 26.5 mm at crusher., aggregates below 5.6 mm at crusher., aggregates 22.4 mm to 2.36 mm at crusher., aggregates 22.4 mm to 5.6 mm at crusher., aggregates 45 mm to 2.8 mm at crusher., aggregates 45 mm to 22.4 mm at crusher., aggregates 53 mm to 2.8 mm at crusher., aggregates 53 mm to 22.4 mm(grade iii) at crusher., aggregates 63 mm to 2.8 mm at crusher., aggregates 63 mm to 45 mm (grade ii)at crusher., aggregates 90 mm to 45mm(grade i) at crusher., aggregates 10 mm to 5 mm at crusher., aggregates 11.2 mm to 0.09 mm (key aggregate type b) at crusher., aggregates 13.2 mm to 0.09 mm (key aggregate type a) at crusher., aggregates 13.2 mm to 5.6 mm at crusher., aggregates 13.2 mm to 10 mm at crusher., aggregates 20 mm to 10 mm at crusher., aggregates 25 mm to10 mm at crusher., aggregates 19 mm to 6 mm at crusher., aggregates 37.5 mm to 19 mm at crusher., aggregates 37.5 mm to 25 mm at crusher., aggregates 6 mm nominal size at crusher., aggregates 10 mm nominal size at crusher plant., aggregates 13.2/12.5 mm nominal size at crusher plant., aggregates 20 mm nominal size at crusher plant., aggregates 25 mm nominal size at crusher., aggregates 40 mm nominal size at crusher., crushing of stone aggregates (gsb crusher run), ac pipe 100 mm dia, acrylic polymer bonding coat, alluminium paint, aluminium alloy plate 2mm thick, aluminium alloy/galvanised steel , aluminium sheeting 2mm thick fixed with encapsulated lens type reflective sheeting including 2% towards lettering, cost of angle iron, cost of drilling holes, nuts, bolts etc.and signs as applicable class-b type iv, road aluminium stud with micro prismatic lens reflectors (with shank) 100 x 100 mm, barbed wire, bearing (cost of parts), bearing (cast steel rocker bearing assembly of 250 to

State Government

CTN :45562938

22 Jun, 2026 NA

Ranchi - Jharkhand

Tender For stone boulder of size 150 mm and below at source quarry supply of quarried stone 150-200 mm size for hand broken at source quarry boulder with minimum size of 300 mm for pitching at source quarry coarse sand i) at source coarse sand ii) at source fine sand at source quarry moorum at source quarry gravel/quarry spall at source quarry granular material or hard murum for gsb works at source quarry fly ash conforming to is:3812 (part ii & i) at hmp plant/batching plant/crushing plant filter media/filter material as per table 300-3 (mort&h specification) at crusher. close graded granular sub-base material 53 mm to 9.5 mm/4.75mm at crusher. close graded granular sub-base material 37.5 mm to 9.5 mm at crusher. close graded granular sub-base material 26.5 mm to 9.5 mm at crusher. close graded granular sub-base material 9.5 mm to 4.75 mm at crusher. close graded granular sub-base material 9.5 mm to 2.36mm at crusher. close graded granular sub-base material 4.75mm to 2.36mm at crusher. close graded granular sub-base material 4.75mm to 75 micron at crusher. close graded granular sub-base material 2.36 mm & below at crusher. stone crusher dust finer than 3 mm with not more than 10% passing 0.075 mm sieve at crusher. coarse graded granular sub-base material 2.36 mm & below at crusher. coarse graded granular sub-base material 4.75 mm to 75 micron at crusher. coarse graded granular sub-base material 4.75mm to 2.36 mm at crusher. coarse graded granular sub-base material 9.5mm to 4.75 mm at crusher. coarse graded granular sub-base material 26.5mm to 4.75 mm at crusher. coarse graded granular sub-base material 26.5 mm to 9.5 mm at crusher. coarse graded granular sub-base material 37.5 mm to 9.5 mm at crusher. coarse graded granular sub-base material 53 mm to 26.5 mm at crusher. aggregates below 5.6 mm at crusher. aggregates 22.4 mm to 2.36 mm at crusher. aggregates 22.4 mm to 5.6 mm at crusher. aggregates 45 mm to 2.8 mm at crusher. aggregates 45 mm to 22.4 mm at crusher. aggregates 53 mm to 2.8 mm at crusher. aggregates 53 mm to 22.4 mm(grade iii) at crusher. aggregates 63 mm to 2.8 mm at crusher. aggregates 63 mm to 45 mm (grade ii)at crusher. aggregates 90 mm to 45mm(grade i) at crusher. aggregates 10 mm to 5 mm at crusher. aggregates 11.2 mm to 0.09 mm (key aggregate type b) at crusher. aggregates 13.2 mm to 0.09 mm (key aggregate type a) at crusher. aggregates 13.2 mm to 5.6 mm at crusher. aggregates 13.2 mm to 10 mm at crusher. aggregates 20 mm to 10 mm at crusher. aggregates 25 mm to10 mm at crusher. aggregates 19 mm to 6 mm at crusher. aggregates 37.5 mm to 19 mm at crusher. aggregates 37.5 mm to 25 mm at crusher. aggregates 6 mm nominal size at crusher. aggregates 10 mm nominal size at crusher plant. aggregates 13.2/12.5 mm nominal size at crusher plant. aggregates 20 mm nominal size at crusher plant. aggregates 25 mm nominal size at crusher. aggregates 40 mm nominal size at crusher. crushing of stone aggregates (gsb crusher run) ac pipe 100 mm dia acrylic polymer bonding coat alluminium paint aluminium alloy plate 2mm thick aluminium alloy/galvanised steel aluminium sheeting 2mm thick fixed with encapsulated lens type reflective sheeting including 2% towards lettering, cost of angle iron, cost of drilling holes, nuts, bolts etc.and signs as applicable class-b type iv road aluminium stud with micro prismatic lens reflectors (with shank) 100 x 100 mm barbed wire bearing (cost of parts) bearing (cast steel rocker bearing assembly of 250 tonne ) road studs 100x100mm fitted with lense reflectors vide clause cl 804.2 of morth (5th revision) bearing (elastomeric bearing assembly consisting of 7 internal layers of elastomer bonded to 6 nos. internal reinforcing steel laminates by the process of vulcanisation) taking elastomeric bearing of size 500 x 400 x 96mm, overall volume=19200 cubic cm bearing (forged steel roller bearing of 250 tonne) bearing (pot type bearing assembly consisting of a metal piston supported by a disc, pt

State Government

CTN :45558189

22 Jun, 2026 NA

Chaibasa - Jharkhand

Tender For the quotation is invited to ascertain and assess the rate of materials as per with lowest market rate for framing of schedule of rate. - stone boulder of size 150 mm and below at source quarry, supply of quarried stone 150-200 mm size for hand broken at source quarry, boulder with minimum size of 300 mm for pitching at source quarry, coarse sand i) at source, coarse sand ii) at source, fine sand at source quarry, moorum at source quarry, gravel/quarry spall at source quarry, granular material or hard murum for gsb works at source quarry, fly ash conforming to is:3812 (part ii & i) at hmp plant/batching plant/crushing plant, filter media/filter material as per table 300-3 (mort&h specification) at crusher., close graded granular sub-base material 53 mm to 9.5 mm/4.75mm at crusher., close graded granular sub-base material 37.5 mm to 9.5 mm at crusher., close graded granular sub-base material 26.5 mm to 9.5 mm at crusher., close graded granular sub-base material 9.5 mm to 4.75 mm at crusher., close graded granular sub-base material 9.5 mm to 2.36mm at crusher., close graded granular sub-base material 4.75mm to 2.36mm at crusher., close graded granular sub-base material 4.75mm to 75 micron at crusher., close graded granular sub-base material 2.36 mm & below at crusher., stone crusher dust finer than 3 mm with not more than 10% passing 0.075 mm sieve at crusher., coarse graded granular sub-base material 2.36 mm & below at crusher., coarse graded granular sub-base material 4.75 mm to 75 micron at crusher., coarse graded granular sub-base material 4.75mm to 2.36 mm at crusher., coarse graded granular sub-base material 9.5mm to 4.75 mm at crusher., coarse graded granular sub-base material 26.5mm to 4.75 mm at crusher., coarse graded granular sub-base material 26.5 mm to 9.5 mm at crusher., coarse graded granular sub-base material 37.5 mm to 9.5 mm at crusher., coarse graded granular sub-base material 53 mm to 26.5 mm at crusher., aggregates below 5.6 mm at crusher., aggregates 22.4 mm to 2.36 mm at crusher., aggregates 22.4 mm to 5.6 mm at crusher., aggregates 45 mm to 2.8 mm at crusher., aggregates 45 mm to 22.4 mm at crusher., aggregates 53 mm to 2.8 mm at crusher., aggregates 53 mm to 22.4 mm(grade iii) at crusher., aggregates 63 mm to 2.8 mm at crusher., aggregates 63 mm to 45 mm (grade ii)at crusher., aggregates 90 mm to 45mm(grade i) at crusher., aggregates 10 mm to 5 mm at crusher., aggregates 11.2 mm to 0.09 mm (key aggregate type b) at crusher., aggregates 13.2 mm to 0.09 mm (key aggregate type a) at crusher., aggregates 13.2 mm to 5.6 mm at crusher., aggregates 13.2 mm to 10 mm at crusher., aggregates 20 mm to 10 mm at crusher., aggregates 25 mm to10 mm at crusher., aggregates 19 mm to 6 mm at crusher., aggregates 37.5 mm to 19 mm at crusher., aggregates 37.5 mm to 25 mm at crusher., aggregates 6 mm nominal size at crusher., aggregates 10 mm nominal size at crusher plant., aggregates 13.2/12.5 mm nominal size at crusher plant., aggregates 20 mm nominal size at crusher plant., aggregates 25 mm nominal size at crusher., aggregates 40 mm nominal size at crusher., crushing of stone aggregates (gsb crusher run), ac pipe 100 mm dia, acrylic polymer bonding coat, alluminium paint, aluminium alloy plate 2mm thick, aluminium alloy/galvanised steel, aluminium sheeting 2mm thick fixed with encapsulated lens type reflective sheeting including 2% towards lettering, cost of angle iron, cost of drilling holes, nuts, bolts etc.and signs as applicable class-b type iv, road aluminium stud with micro prismatic lens reflectors (with shank) 100 x 100 mm, barbed wire, bearing (cost of parts), bearing (cast steel rocker bearing assembly of 250 tonne ), road studs 100x100mm fitted with lense reflectors vide clause cl 804.2 of morth (5th revision), bearing (elastomeric bearing assembly consisting of 7 internal layers of elastomer bonded to 6 nos. internal reinforcing steel laminates by the process of vulcanisation), taking elastomeri

State Government

CTN :45562939

22 Jun, 2026 NA

Hazaribag - Jharkhand

Tender For list of approved construction materials for the preparation of schedule of rates for the year 2026, basic rates of which to be approved by the state level schedule rate committee (materials should conform to relevant b.i.s., mord and mort&h specifications). the rates will be inclusive of royalty but exclusive of all taxes, g.s.t,overhead and contractors profit. "rates are at source"quarry/ crusher plant. - stone boulder of size 150 mm and below at source quarry, supply of quarried stone 150-200 mm size for hand broken at source quarry, boulder with minimum size of 300 mm for pitching at source quarry, coarse sand i) at source, coarse sand ii) at source, fine sand at source quarry, moorum at source quarry, gravel/quarry spall at source quarry, granular material or hard murum for gsb works at source quarry, fly ash conforming to is:3812 (part ii & i) at hmp plant/batching plant/crushing plant, filter media/filter material as per table 300-3 (mort&h specification) at crusher., close graded granular sub-base material 53 mm to 9.5 mm/4.75mm at crusher., close graded granular sub-base material 37.5 mm to 9.5 mm at crusher., close graded granular sub-base material 26.5 mm to 9.5 mm at crusher., close graded granular sub-base material 9.5 mm to 4.75 mm at crusher., close graded granular sub-base material 9.5 mm to 2.36mm at crusher., close graded granular sub-base material 4.75mm to 2.36mm at crusher., close graded granular sub-base material 4.75mm to 75 micron at crusher., close graded granular sub-base material 2.36 mm & below at crusher., stone crusher dust finer than 3 mm with not more than 10% passing 0.075 mm sieve at crusher., coarse graded granular sub-base material 2.36 mm & below at crusher., coarse graded granular sub-base material 4.75 mm to 75 micron at crusher., coarse graded granular sub-base material 4.75mm to 2.36 mm at crusher., coarse graded granular sub-base material 9.5mm to 4.75 mm at crusher., coarse graded granular sub-base material 26.5mm to 4.75 mm at crusher., coarse graded granular sub-base material 26.5 mm to 9.5 mm at crusher., coarse graded granular sub-base material 37.5 mm to 9.5 mm at crusher., coarse graded granular sub-base material 53 mm to 26.5 mm at crusher., aggregates below 5.6 mm at crusher., aggregates 22.4 mm to 2.36 mm at crusher., aggregates 22.4 mm to 5.6 mm at crusher., aggregates 45 mm to 2.8 mm at crusher., aggregates 45 mm to 22.4 mm at crusher., aggregates 53 mm to 2.8 mm at crusher., aggregates 53 mm to 22.4 mm(grade iii) at crusher., aggregates 63 mm to 2.8 mm at crusher., aggregates 63 mm to 45 mm (grade ii)at crusher., aggregates 90 mm to 45mm(grade i) at crusher., aggregates 10 mm to 5 mm at crusher., aggregates 11.2 mm to 0.09 mm (key aggregate type b) at crusher., aggregates 13.2 mm to 0.09 mm (key aggregate type a) at crusher., aggregates 13.2 mm to 5.6 mm at crusher., aggregates 13.2 mm to 10 mm at crusher., aggregates 20 mm to 10 mm at crusher., aggregates 25 mm to10 mm at crusher., aggregates 19 mm to 6 mm at crusher., aggregates 37.5 mm to 19 mm at crusher., aggregates 37.5 mm to 25 mm at crusher., aggregates 6 mm nominal size at crusher., aggregates 10 mm nominal size at crusher plant., aggregates 13.2/12.5 mm nominal size at crusher plant., aggregates 20 mm nominal size at crusher plant., aggregates 25 mm nominal size at crusher., aggregates 40 mm nominal size at crusher., crushing of stone aggregates (gsb crusher run), ac pipe 100 mm dia, acrylic polymer bonding coat, alluminium paint, aluminium alloy plate 2mm thick, aluminium alloy/galvanised steel, aluminium sheeting 2mm thick fixed with encapsulated lens type reflective sheeting including 2% towards lettering, cost of angle iron, cost of drilling holes, nuts, bolts etc.and signs as applicable class-b type iv, road aluminium stud with micro prismatic lens reflectors (with shank) 100 x 100 mm, barbed wire, bearing (cost of parts), bearing (cast steel rocker bearing assembly of 250 tonne ), road st

Central Government/Public Sector

CTN :45567147

07 Jul, 2026 NA

Mumbai - Maharashtra

Tender For (1) upgradation of suburban platforms as per divyangjan policy at mumbai central (l), mahalaxmi, dadar, matunga road, mahim, bandra (2) contrast painting of structural assets on platform as per the latest mea guidelines for divyangjan facilities at marine lines, charni road, grant road, mumbai central (l), mahalaxmi, lower parel, prabhadevi, dadar, mahim junction, matunga road, bandra and khar road station.(3) thermoplastic paint road marking for 02 divyangjan parking lots at 93 stations nsg1 to nsg6 & sg1 to sg3

State Government

CTN :45564663

25 Jun, 2026 50.00 Lacs

Sawai Madhopur - Rajasthan

Tender For supply of various good and materrials in gram panchayat maksudanpura under all schemes- ghadla/kankar/jhajhra , mortar/mud mixture, , kali kiln lime for lime masonry work, , cement, , ppc, , white cement, , fine aggregate, , sand/gravel, , gravel - local, , rakhi (fly ash), , surkhi, , stone dust (in masonry), , ballast stone/brick (for other than road work), , 40mm measuring stone (hand-broken grit) (voids carte 1/11), , 40mm grit stone (crushed) (cut voids 1/11), , 20mm grit stone (crushed), , 12/10/6mm grit stone (crushed), , brick mortar, , material for road work (including 5 km lead), , 63-40 mm crusher broken stone crushed (cut voids 1/11), , 63-40 mm hand-broken stone aggregate (voids cart 1/11), , 90-45 mm hand-broken stone aggregate (voids cart 1/11), , quarry rubbish (cut the voids 1/6), , gravel (voids cart 1/6), , conker (voids cart 1/6), , binding material (pi 4-6) (cut voids 1/6"), , brick (22.5 x 11 x 7.50 cm), , first class (ist class), , ii class, , soling / kharanja / masonry stone, , chinnai berdha (rr), , masonry rubble (cr), , kharanja soling (for floor work up to 15cm height), , kharanja soling (23cm height for road kharanja work), , jodhpuri type stone slabs/arches/slabs (length 2-3', width 10-12", thickness 2.5-3.5"), , flaky material (3-4" thick & length and width 1-2"), , sandstone (dpc, sill, coping, lintel, tand, almirha etc.), , up to 25mm thickness, , up to 25-40mm thickness, , up to 40-50mm thickness, , up to 50-75mm thickness, , up to 75-100mm thickness, , up to 100-150mm thickness, , flooring / patti patan katla stone, , floor slabs upto 35mm thick, min, 3 sqft or more area, , katla for patti patan 60-75mm thickness, min, 3 sqft or more area, , unpolished rough kota stone, , up to 900 sq cm, , - 901 to 2300 sq cm, , more than 2300 sq cm, , polished kota stone (one side polished), , up to 900 sq cm, , = 901 to 2300 sq cm, , more than 2300 sq cm, , marble stone (makrana adanga 20mm thick), , up to 900 sq cm, , = 901 to 2300 sq cm, , more than 2300 sq cm, , marble chips, , marble powder, , marble stone (rajnagar || quality/local 20mm thick), , up to 900 sq cm, , - 901 to 2300 sq cm, , more than 2300 sq cm, , stone frame, , single pattern size 100 x 75 mm,, , double patam size 125 x 75 mm,, , stone slabs, , up to 1,5 m length, minimum 40mm thick, , 1.5 m to 2.40 m length, minimum 50mm thick, , 2.4 m to 3.0 m length, minimum 65mm thick, , above 3.0 m length, minimum 75mm thick, , precast tiles/blocks, , glazed size-30x45 cm, , mosaic size-40mm thick, , vitrified size-60x60 cm, , interlock tiles/brick/block for road work, , cement interlocking block m-30grade, 60mm thick, , cement interlocking block m-30grade, 80mm thick, , cement interlocking block m-30grade, 100mm thick, , fr pvc insulated copper conductor single core cable isi marked, , 1.50 sq mm, , 2.50 sq mm, , 0,50 sq mm, , 1,00 sq. m,, , 4.00 sq mm, , 6.00 sq mm, , local wood with fittings (for doors, windows and furniture), , mango, , acacia, , other, , factory made doors (30 mm thick, solid core single pane), , structural steel, , iron (or steel fe 415/500 for reinforcement), , winding wire 18 gauge, , iron guard, , conical iron/squared bar/patti/angle iron, , barbed iron wire (size 12 guage wire and 12 guage strad/12 guage, , wire and 14 guage strad/14 guage, , forged, , iron mesh (24 gauge, 14 mesh), , cement concrete lattice sky patal 40mm thick, , glass, , 3mm thick glass, , color paint, , inamil paint, , distemper (water bound), , for lime-plastering (aras / bud), , primer (for iron/wood), , petroleum products, , diesel hsd, , mobil oil, , bitumen shalitax board (25 mm thick), , plain sheet, , gi sheet 22 gauge (0.80 mm), , gi sheet 24 gauge (0.63 mm), , m.s. sheet 22 gauge (0.80 mm), , m.s. sheet 24 gauge (0.63 mm), , corrugated sheet, , gi sheet 1 mm thick, , gi sheet 22 gauge (0.80 m.m.), , asbestos cement sheet 6mm(2.5/2.75x1m), , other sheets, , pvc sheet 1 mm thick (coloured/plain), , green yellow literoof expo sheet (183x90)

Central Government/Public Sector

CTN :45562181

02 Jul, 2026 NA

Khadki - Maharashtra

Tender For provision of thermoplastic paint, cat eyes and sign boards

Corporations And Associations And Others

CTN :45523190

19 Jun, 2026 4.76 Lacs

Delhi - Delhi

Tender For provision of new led street lights with allied accessories on existing poles at various dark spots in saidulajab ward no 160 under south zone - led street light fixture, powder coated pressure die cast aluminium body (system lumen efficacy >135 lm/watt). supplying, installation, testing & commissioning of street light led fixture, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with driver efficiency >85%, input voltage: 140-270 volt ac, frequency 50/60 hz, operating temp range -5 0c to 50 0c, internal surge protection of 5 kv l,n,e as per iec 61000-4-5, driver efficiency >85%,thd 10% as per iec 61000-3-2, p. f. 0.95, ip-66,ik-10, cri >70, under voltage and over voltage protection, emi-emc as per cispr-15, lenses for beam angle as per iesna type i/ii/iii as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (led,driver & electrical circuitary) of minimum 50000 burning hours with 70% of initial lumen maintained till life ends as per lm80 extrapolation ies tm-21-11 report, cct 3000 k / 4000 k / 5700 k /6500 k (as per ansi bin), sdcm(standard deviation color matching)5, maximum power consumption should not more than the specified rating and fixture shallbe of relevant bis standard complete in all respect i/c external connections with 1.5 sq mm frls/hffr, pvc insulated copper conductorsingle core cable and earthing etc. as required withminimum 5 year oem warranty. system lumen efficacy >135 lm/watt output . lm79 & lm80 testreport and all testing required for led fixturesas per bis shall be submitted.. shape size and cct shall be as approved by engineer-in-charge asper requirement. (thermal management: heat sink of aluminium housing such that led junction temperature shall not rise above 90 c). 45 watt , supply and fixing of 32mm dia x 1 meter long g.i. pipe (medium class) bracket for mounting of fluorescent/hpmv/hpsv street light fitting on pole including bending the pipe to the required shape , 2 nos 25mm x 6mm flat iron clamps with nuts, bolts and washer , painting the flat iron with primer and finish paint etc. as reqd, supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required. 3 x 1.5 sq. mm, supply of xlpe insulated pvc sheathed al. conductor un-armoured cable 1.1kv grade conforming to is-7098 of following size:-2c*4 sqmm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required. upto 35 sq. mm

Corporations And Associations And Others

CTN :45523194

19 Jun, 2026 4.67 Lacs

Delhi - Delhi

Tender For provision of led light fittings with accessories at various locations in ward no. 167 khanpur, under south zone. - supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required. 3 x 1.5 sq. mm, supply and fixing of 32mm dia x 1 meter long g.i. pipe (medium class) bracket for mounting of fluorescent/hpmv/hpsv street light fitting on pole including bending the pipe to the required shape , 2 nos 25mm x 6mm flat iron clamps with nuts, bolts and washer , painting the flat iron with primer and finish paint etc. as reqd., supply of xlpe insulated pvc sheathed al. conductor un-armoured cable 1.1kv grade conforming to is-7098 of following size:-2c*4 sqmm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required. upto 35 sq. mm, led street light fixture, powder coated pressure die cast aluminum body (system lumen efficacy 135 lm/watt) supplying, installation, testing & commissioning of street light led fixture, powder coated pressure die cast aluminum body with built in or separate driver as per the requirement with driver efficiency >85%, input voltage: 140-270 volt ac, freq 50/60 hz, operating temp range -5 deg centigrade to 50 deg centigrade, internal surge protection of 5 kv l,n,e as per iec 61000-45, driver efficiency >85%,thd 10% as per iec 61000-3-2 , p. f. 0.95, ip66,ik-10, cri 70 , under voltage and over voltage protection,emi-emc as per cispr-15, lenses for beam angle as per iesna type i/ii/iii as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (led,driver & electrical circuitry) of minimum 50000 burning hours with 70% of initial lumen maintained till life ends as per lm80 extrapolation ies tm-21-11 report , cct 3000 k / 4000 k / 5700 k /6500 k (as per ansi bin) , sdcm(standard deviation color matching) 5, maximum power consumption should not more than the specified rating and fixture shall be of relevant bis standard complete in all respect i/c external connections with 1.5 sq mm frls/hffr, pvc insulated copper conductor single core cable and earthing etc. as required with minimum 5 year oem warranty. system lumen efficacy 135 lm/watt output . lm79 & lm80 test report and all testing required for led fixtures as per bis shall be submitted. shape size and cct shall be as approved by engineer-in-charge as per requirement. (thermal management: heat sink of aluminum housing such that led junction temperature shall not rise above 90 c). 45 watt

CTN :45560463

22 Jun, 2026 8.42 Lacs

Multi City - Andhra Pradesh

Tender For providing standard lane marking in main roads in vinayaka sagar to sub register colony (karakambadi road south side) with themo plastic paint under zone-6.

Thermoplastic Paint Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors