Thermoplastic Painting Tenders

Get complete information related to latest Thermoplastic Painting Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Thermoplastic Painting Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Thermoplastic Painting Tenders .

Filter

Loading....

Get Tender in Email

CTN :41835825

23 Sep, 2025 50.00 Lacs

Vallabhnagar - Rajasthan

Tender For work rate contract for road furniture in the municipal area - earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of engineer for following depths, below natural ground / road top level. in all types soils/ saturated soil such as moorum, sand, sandy silt, clay, black cotton soil, kankar, etc. depth upto 1.5 m, providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - all work upto plinth level :1:4:8 (1 cement : 4 fine/ coarse sand : 8 graded stone aggregate 40 mm nominal size), centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for foundations, footings, bases of columns, etc. for mass concrete, columns, pillars, piers, abutments, posts and struts, reinforcement for r.c.c. work at all levels including straightening, cutting, bending, placing in position and binding all complete. hot rolled deformed bars, providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - all work upto plinth level : 1:1 :3 (1 cement : 1 coarse sand : 3 graded stone aggregate 20 mm nominal size), steel work in built up tubular trusses including cutting, hoisting fixing in position and applying a priming coat of approved steel primer welded and bolted including special shaped washers etc. complete. hot finished welded type tubes, providing and erecting overhead signs with retro reflective type iv sign plate fixed on angle iron frame with vertical and lateral clearance given in clause 802.2 and 802.3 and installed as per clause 802.7 over a designed support system of galvanised steel trestles and trusses of sections and type as per structural design requirements and approved plans. truss and vertical support, providing and fixing high intensity retro reflective type iv sign plate made out of 2.00 mm thick aluminium sheet face to be fully covered with blue/green high intensity grade retro reflective sheet and logo/matters, boarder made of with similar type of white sheeting after etching treatment of aluminium sheet, the black side is to be painted with epoxy grey paint. the plate is to be fixed on 40x40x5 mm angle iron frame with help of aluminium rivets., painting steel work with deluxe multi surface paint to give an even shade. two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture, providing and laying marking of center line and stop line etc with hot thermoplastic compound 2.5 mm thick on road/ plain surface, including reflectorising glass beads @ 250 gms per sqm area with special applicator machine, as per irc:35 including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control involved. the finished surface to be level, uniform and free from streaks and holes as per clause 803 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion., supplying and fixing glow studs of size 100 x 20 mm made of heavy duty body shall be moulded asa (acrylic styrene acrylortrite) of abs having electronically welded micro prismatic lens with abrassion resistant coating as approved by enginee- in-charge. the glow stud shall support a load of 13635 kg. tested in accordance with astm d4280. the slope of retro-reflective surface shall be 35+/ -5 degree to base. the panels on both sides with at least 12 cm of reflective areas up each side. the luminance intensity should be as per the specefication and shall be tested as described in astm 1: 809 as recommended in bs : 873 part 4 : 1973 as per approv

State Government

CTN :41780739

20 Sep, 2025 19.02 Lacs

Khowai - Tripura

Tender For pr of pwd road from gourangatilla- khas kalyanpur to maichangbari (l=1.00 km) under pwd(r&b) padmabil sub-division ( 24-ramchandraghat constituency) during the year 2025-2026 / sh:- side stripping, pothole repair, wbm-3, re-carpeting, seal coat, surface drain, gunny bag, painting lines etc. from ch. 0.50 km to 1.00 km ( gr-ii )

State Government

CTN :41780740

20 Sep, 2025 24.23 Lacs

Khowai - Tripura

corporations/Associations/Others

CTN :41748298

22 Sep, 2025 4.91 Lacs

Kolkata - West Bengal

Tender For repair and maintenance of broken doors, windows and painting of external wall surface of k.m.c labour quarter at 6/1 , palmer bazar road in ward no-55

State Government

CTN :41750149

18 Sep, 2025 17.14 Lacs

Lucknow - Uttar Pradesh

Tender For 25 mm thick premix carpeting with material bituminous on existing bm course from c type to guest house and b type to guest house t junction at bbau - providing and applying tack coat using hot straight run bitumen of grade vg - 10 including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications : on bituminous surface @ 0.50 kg / sqm., providing and laying semi-dense bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of engineer-in-charge. 25mm compacted thickness with bitumen of grade vg-30 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of aggregate) prepared in batch type hot mix plant of 100-120 tph capacity., painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work., providing and fixing glow studs of size 100x20 mm made of heavy duty body shall be moulded asa (acrylic styrene acryloretrite ) or hip (high impact polystyrene) or abs having electronically welded micro- prismatic lens with abrasion resistant coating as approved by engineer in charge. the glow stud shall support a load of 13635 kg tested in accordance with astm d4280. the slope of retro- reflective surface shall be 35 (+/-5) degress to base .the reflective panels on both sides with at least 12 cm of reflective area up each side. the luminance intensity should be as per the specification and shall be tested as described in astm i: 809 as recommended in bs: 873 part 4 : 1973. the studs shall be fixed to the road surface using the adhesive conforming to is, as per procedure recommended by the manufacturer complete and as per direction of engineer-in-charge., clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared., repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of engineer-in- charge.

Loading, Please wait...

Thermoplastic Painting Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

corporations/Associations/Others

State Government