Latest thermostat over heat protector Tenders | Government thermostat over heat protector Tenders

State Government

CTN :45275642

02 Jun, 2026 3.07 Lacs

Serampore - West Bengal

Tender For repairing and overhauling of one no twin lobe air blower assembly and renovation of 2 nos outgoing motor (blower ) feeder of lt pdb with supply, fitting and fixing spares at sludge pump house under swtp, kmda. - supply,installation,testing and commisioning of following items for hoisting system/ blower and gear box as mentioned below as per direction including cost of materials, machinaries , manpower, cutting,machining,aligning,anchoring,welding,finishing,consumables, carriage and all overheads with all leads and lifts complete as per specification (without painting), i) base frame (ms), ii) shaft/pin with key ways made of ss-304, iii) gear& pinion (forged steel), supply and fixing the 3way c.i v grooved pulley with complete mechanism key way suitable to en-24, 60 mm dia/ as per sample of shaft end., a) motor driving, b) blower driving, supply of gear oil as per direction of engineer in charge., supply of grease, supply and delivery of the following bearing (make: skf):, i) 22312e/c3/ as per sample. (for blower), supply and fixing of tough v belts (make: fenner/power boom / v guard/benq/ecodrive) of the following size c 98/ as per sample., supply fitting fixing of ss (aisi304) bolts,nut & washer i) dia 10 mm to 20 mm a) length upto 75 mm, refixing of impeller of blower after dynamic balancing in workshop as per is rule after dismantling the same., dismantling the 25/30 h.p (18.5 kw)//30 h.p squirrel cage motor from its foundation by opening mounting bolts and disconnection of cables from terminal box and open the v belts for repairing purpose (in condition), preliminary checking of the whole motor (lt sq. cage im) and testing of i.r. value, load currents, leakage factor of stator & rotor, terminal lead joints of stator connection ends, insulation of glass fibre terminal bar, double cage rotor end rings and all of motor bars and bar joints, housing of d.e. & nde shield bearing housing etc. before work to detect fault., complete servicing and heat varnishing of 415volt, 3 phase l.t. sq. cage induction motor after cleaning the stator and heating it up periodically and varnishing by dr. beck s graded insulating varnish to obtain stable ir value, cleaning up the rotor, including heating for demoisturisation, lacker coating on the surface of rotor stampings, cleaning and ro priming on the end shield covers, bearing housing and complete the necessary repairing works as per direction of e.i.c.upto 75kw lt sq. cage im ], re fixing the 25/30h.p star/delta squirrel cage motor over its foundation by mean of mounting bolts & nuts, washer complete connection of existing led of cable at the terminal box and wear the v belts with proper alignment in respect to i.d. fan (12000 cu m/hr capacity)/ blower by adjusting the side rail for smooth running., finishing the end of terminal leads by s & f dowells copper sockets properly supplying tapes, petrollium jelly etc. 6 nos.upto 75kw lt sq. cage im., cost of mechanical work viz. shaft truness, checking key way looping of holes grinding and polishing etc. upto 75kw lt sq. cage im., inspection checking/testing and servicing of the existing starter panel, all terminal connection, contactors, relays etc as per desired technical specification including man and minor materials for proper functioning as per direction of eic., supply and fixing of 240/230 volt, 50 hz, t.p., power contactor (make: l & /abb/schneider/ simence/ ge) having contact block of the following range.32-55amp, supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) blue/ white color., supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) other than blue/ white color., supply and delivery of thermal overload relays (make: l & t/abb/schneider/simence/ ge/minilec) of the following range:a) 0.2-0.33/ 0.3-0,5/ 0.45-0.75, mn2, supply of ammeter selector switch current in each phase with off, 4 pos. 90 angle ofthrow (off-r-y-b) , supply and fixing of analog ammeter ranging

State Government

CTN :45274161

01 Jun, 2026 12.50 Lacs

Chhindwara - Madhya Pradesh

Tender For supply of laboratory equipment and others materials for existing, accredited district water testing distt. laboratories of division chhindwara - external calibration of laboratory equipment refrigerator/ , visi cooler rtd probe with sensar, glass thermometer, thermometer, wet and dry , thermometer, balance, analytical weight box,ph meter, tds meter, turbidity meter through iso/iec 17025:2017 accredited calibration laboratory with calibration certificate , smart uv-vis spectrophoto meter; 2206 touch screen uv-vis spectrophoto meter, wavelength range 190-1100 nm, accuracy + 1.0 nm, resolution 1.0 nm, bandwidth 1.0 nm. cuvette holder 50 mm path length. with display, with two years amc. with calibration certificate of control of absorbance, resolution power, limit of stray light. light source xenon flash lamp/tungten lamp/ deuterium lamp. to be supplied with 2 pairs of quartz cuvette. size 10 mm. including cost of supply, installation & training to lab staff for making graph of iron, nitrate, flouride, maganese test at nabl accredited lab with certificate. (nabl ceritified) make systronics , color comprator for color analysis , hot plate: rectangular body- heating upto 300'c are fitted with insulated elements. workable on 220/230 volts a.c. surface with cast iron top 300x450x150 mm rating 2 km with digitally , bacteriologycal incubator (memmert type with digital controllar): double walled, outer made of gi/ms powder coated. element of three sides' ss chamber digitally controlled temp. range 5'c above rt to 70 c + 0.5'c fitted with fan having double viewing sindow, supplied with shelves workable on 220/230 volts a.c. size 455x445x455 mm deluxe model with nabl certificate , ion meter versastar banch top modal (ph/ise)with flouride combination, epoxy body electrode with range form 0.01 mg/l ph ross electrode bnc connector, power syplly card opration manual, usb cable, universal ac power adaptor 90-260v ac electrode holding stand, stirrer (1) one pack flouride filling solution 475 ml (2) flouride standard 100 ppm 475 ml solution (3) flouride electrode storing solution 475 ml x 2 no (4) tisab iii solution 475 ml x1 including cost of supply, installation & training to lab staff for making graph of iron, nitrate, flouride, maganese test at nabl accredited lab with certificate. (nabl ceritified lab) , fluoride electrodes (combination fluoride electrode epoxy body with bnc connector) thermo orien -960913 nwp , monoquartz distillation unit-3362 dist. water output cap. (approx) 4.0 lt.hr/ electrical requirements 230-250 volts single phase 3.5x 2kw quartz heater/minimum cooling water requirment 2.5 lit/ min (ea)/ biological activity pyrogen free/ conductivity s/cm <1 x 10-6/ distillate temp 65-75'c , plate colony counter model no. cc-100 220 woult 1 year worenty measurement range 0 to 999 semi autometic precise colony counting metal plastic , laboratry refrigerator rlr-300 cooling type frost free temp. rang 2'c to 8'c glass dour 1, width 584, depth 584,hight 1702,220-240 woult 50 hz singal face , sampling bottel capicity 1 itr , membran filter assembley 5360 all galss filter holder 47mm filtretion assembley made for borosilcate glass with filter base capicity-21tr , spare for all glass filter holder 47mm dai capicity 2000ml for filter holder . tissu paper roll 3 layer

State Government

CTN :45289480

30 May, 2026 NA

Palamau - Jharkhand

Tender For renovation of electro mechanical items for rural ws scheme, lesliganj - part a (raw water p/plant mali river at sitadih ), cost towards repairing and overhauling of 50 h.p. v.t. pump set multiple stage ball assembly s/f impeller g.m. bush as per sample 5 nos each, s/f housing bush as per sample. replace in spider rubber cutless bush 5 nos, replacing of 25mm dia. 5 feet long s.s. line shaft 4 nos with s.s. socket . transportation charge from site to work shop vice versa including tools tackles and labour charges for lifting & lowering v.t. pump before and after repairing work etc all complete at pumping plant., supplying all labour tools and tackles for complete opening, dismantling , cleaning of its slots of stator by brush & petrol then complete rewinding of 50 h.p. 440 volts, 50 c/s, star delta, 3 phase hollow shaft v.t. motor by supplying super enameled copper wire & binding, tapping varnishing, heating, testing on full load and repairing of stator & rotor, changing of bearings as per sample skf make with including the deduction of cost of burnt copper wires and transportation charges from p/plant to workshop and back to the same . including tools & tackles and labour charges etc all complete at p/plant., cost towards repairing/ replacement of 200 amp motor control panel board consisting of incoming feeder mccb 200 amp 1 no. and outgoing feeder mccb 100 amp 2 nos, timer 1 no., thermal over load release relay 2 nos. supplying and fitting of digital volt meter (0-500v) squared type 2 nos, ammeter (0-125amp) squared type 2 nos and replacement of phase indicator lamp 3 nos. including internal wiring etc all complete., cost towards supplying & fitting 35 mm2 3 core copper conductor 15 mtr panel to motor., cost towards supplying & fitting 60 watt led street light (jsor-m840), part b (clear water lesliganj.), cost towards repairing/ replacement of 200 amp motor control panel board consisting of incoming feeder mccb 200 amp 1 no. and outgoing feeder mccb 100 amp 3 nos, timer 1 no., thermal over load release relay 3 nos. supplying and fitting of digital volt meter (0-500v) squared type 2 nos, ammeter (0-125amp) squared type 2 nos and replacement of phase indicator lamp 3 nos. including internal wiring etc all complete., supplying all labour tools and tackles for complete opening, dismantling , cleaning of its slots of stator by brush & petrol then complete rewinding of 20 h.p. 440 volts, 50 c/s, star delta, 3 phase induction motor by supplying super enameled copper wire & then tapping varnishing, heating & testing on full load and repairing of stator & rotor, changing of bearings as per sample skf make with including the deduction of cost of burnt copper wires and transportation charges from p/plant to workshop and back to the same . including tools & tackles and labour charges etc all complete at p/plant., cost for repairing of 20 h.p. c/f pump with m/s/f s.s. shaft as per sample 1 no. c.i. gland tightner 2 nos, c.i. bearing housing 2 nos, ms. check nut 2 nos, c.i. neckring 2 nos, ball bearing s.k.f. as per sample 2 nos, all labour tools & tackles and materials with loading and unloading transporting charge from site to workshop & vice versa., cost towards varnishing, heating of winding & greasing of both side ball bearing of 25 h.p. induction motor 3 phase, 1440 rpm, volt 410 10% 50 cycle along with supplying & fitting of tyre coupling 2 nos, then testing on full load at site including supply of all labour tools and tackles., cost for repairing of 25 h.p. c/f pump with m/s/f s.s. shaft as per sample 1 no. c.i. gland tightner 2 nos, c.i. bearing housing 2 nos, ms. check nut 2 nos, c.i. neckring 2 nos, ball bearing s.k.f. as per sample 2 nos, all labour tools & tackles and materials with loading and unloading transporting charge from site to workshop & vice versa., supplying all labour tools and tackles for complete opening, dismantling , cleaning of its slots o

CTN :45244477

25 May, 2026 NA

Pondicherry - Pondicherry

Tender For providing and fixing of kitchen chimney gas poipeline connection and kitchen equipments for the canteen building inside the ptu campus under rusa fund - ss dosa plate:supply and fabrication of 4 ft 2.5 ft commercial dosa plate, constructed with ss 304 grade outer body (1.2 mm thick) and heavy-duty ms/cast iron plate (12 mm thick), equipped with 3 4 high-pressure lpg burners with individual control valves,complete with oil drain system, splash guard, sturdy ss frame with adjustable legs, and matt finish, suitable for continuous commercial kitchen use. , ss chapati plate:supply and fabrication of 4 ft 2.5 ft commercial chapati plate, constructed with ss 304 grade outer body (1.2 mm thick) and heavy-duty ms/cast iron plate (12 mm thick), equipped with 3 4 high-pressure lpg burners with individual control valves, complete with oil drain system, splash guard, sturdy ss frame with adjustable legs, and matt finish, suitable for continuous commercial kitchen use., chimney with ducting & blower:supply, fabrication, and installation of 10 feet long commercial kitchen chimney (exhaust hood) made of ss 304 grade (1.0 1.2 mm thickness), rectangular type with ss baffle filters and oil collection tray, connected with 150 sq.ft gi ducting (0.6 0.8 mm thickness), complete with 2 hp heavy-duty centrifugal exhaust blower (3-phase, 1440 rpm), mounted on ms angle support structure, including all necessary fittings, clamps, bends, hangers, and electrical connections, suitable for continuous commercial kitchen operation, bain marie (7 compartment):supply and installation of 7-compartment commercial bain marie unit, fabricated in ss 304 grade (1.0 1.2 mm thickness), complete with 7 nos. gn pans with lids, fitted with 3 kw electric heating element (230v, single phase), thermostatcontrolled water bath heating system, and sturdy ss/ms support structure with adjustable legs, including water tank and drain arrangement, suitable for continuous commercial kitchen and buffet operations., working table with 1 under shelf:supply and fabrication of 4 ft 2 ft working table (vegetable cutter table) made of ss 304 grade (1.0 1.2 mm thickness), complete with one under shelf (u/s), heavy-duty ss square pipe frame, reinforced top with machine mounting provision, and adjustable legs, suitable for vegetable cutting and food preparation in commercial kitchens, gas rice steamer (20 kg):supply and installation of 20 kg capacity gas rice steamer, fabricated in ss 304 grade (1.0 1.2 mm thickness), double-wall insulated type, complete with heavy-duty perforated rice vessel, high-efficiency lpg gas burner, pressure control system, steam outlet, and sturdy ms/ss stand, suitable for continuous commercial kitchen operation., ss rack (4 tier): supply and fabrication of 4-tier stainless steel rack of size 35" 14" 48", made of ss 304 grade (1.0 1.2 mm thickness), complete with four shelves, heavy-duty ss square pipe frame, adjustable legs, and smooth polished finish, suitable for storage of utensils, provisions, and kitchen materials in commercial kitchens., copper gas pipeline:supply, installation, testing, and commissioning of copper gas pipeline system suitable for commercial kitchen, using 3/4 inch main line and 1/2 inch branch lines, complete with all necessary fittings, isolation valves for each equipment, pressure regulator, nrv, and flexible hose connections, properly supported and leak-tested, suitable for lpg gas supply to dosa plate, chapatti plate, rice steamer and gas stove units.

CTN :45281561

11 Jun, 2026 59.46 Lacs

Leh Ladakh - Jammu And Kashmir

Tender For tender for supply of fixing self regulating heat tape cable insulation and accessories in ppr pipe - providing and fixing self regulating heat tape resistance heating cable suitable to protect freezing of water in pipelines having rated output of 35 w per meter at 220 v ac supply the heating cable shall have capabibility to automatically adjust its heat output based on surrounding temperature conditions to prevent freezing and overheating the cable should be suitable for continuous operation in outdoor in adverse climatic conditions flexible for installation around pipelines joints and valves and compatible with temperature controller systems , providing m20 3 pin connector suitable for making secure electrical joints between self regulating heat cable terminals designed for reliable power and signal continuity the connector should be operable for operation at rated 220 v ac supply and compatible with heating cables of specified capacity must l ensure safe and firm termination with robust insulation to prevent moisture ingress short circuits and electrical leakage the connector shall be made up from high-quality weather resistant materials suitable for continuous outdoor operation under adverse environmental conditions it should be ease in installation with a compact and durable design for use in pipeline joints terminations and interconnections the connector should be compatible with temperature control systems and associated accessories ensuring long term performance safety and protection against overheating corrosion and mechanical stress , providing temperature differential controller with auto and manual operation housed in a robust ip65 rated enclosure suitable for controlling heat tracing systems to prevent freezing of water in pipelines and utilities the controller should be capable to automatically switch the heat tape on off based on preset temperature differentials ensuring optimal performance and energy efficiency the controller should have in built safety features such as overrun protection and burn out protection to safeguard the heating cable and associated equipment from damage the enclosure shall be weatherproof and suitable for outdoor installation offering protection against dust and water ingress and ensuring reliable long term operation under harsh environmental conditions , providing pt100 temperature sensors with 10 metre cable suitable for accurate temperature measurement and control in heat tracing and pipeline monitoring applications the sensors should be made up of platinum resistance type pt100 ensuring high precision stability and reliability over a wide temperature range the wire with sensor should have high quality insulation suitable for reliable signal transmission and compatible with temperature controllers and monitoring systems the cable shall be durable flexible and suitable for installation in outdoor under extreame weather conditions in high altitude area , providing 3 core 1.5 sq mm pvc insulated and pvc round sheathed multicore flexible cable comprising bright annealed bare copper conductors suitable for heavy duty industrial applications rated for voltage grade up to 1100 volts the cable shall confirm to requirements of is 694 2010 the conductors shall be made of high-conductivity annealed copper ensuring efficient current carrying capacity and minimal losses each core shall be uniformly insulated with high-quality pvc compound and the overall cable shall be protected with a durable pvc outer sheath providing resistance against moisture abrasion and mechanical stresses the cable shall be flexible in nature allowing ease of installation in confined and complex routing conditions it should be suitable for continuous operation in indoor and outdoor adverse environments offering reliable performance electrical safety and long service life

CTN :45236118

02 Jun, 2026 34.64 Lacs

Murshidabad - West Bengal

Tender For supply and installation and commissioning of different machineries and tools of dihipara beekeeping cluster, dihipara, murshidabad under wbkvib during the year 2026 27 2nd call - supply and installation and commissioning of raw honey storage tank specification:fabricated from 304 grade 3 mm thick stainless-steel sheet, all joins argon welded and polished. one number manhole is provided on top. both top and bottom is dished type.capacity 1200 kg, supply and installation and commissioning of honey processing plant 1. ms control panel - 012. ss channel and angel structure - 013. pre heating tank in coil shape - 014. microfine replaceable cartridge filter press with gear pump - 015. processing tank with 1 nb coil - 016. falling film evaporator with ms stand - 017. wate ring vaccum pump 3 hp + water pump - 028. cooling tank with 1 nb pipe coil - 019. settling tank - 0210. set of ss pipes for honey piping - 0111. set of gi pipes with specials for water pump fitting -01specification:1. one no stainless steel prefilter tank having thickness of 1.6mm with volumetric, capacity of 500 kg along with 500 micron mesh.2. gear pump: made by m/s. rotodel company with full stainless steel body and gears. basic output capacity: 2000 its/hour. it will be suitably reduced to give required output.3. drive motor: 1.00 h.p. 3 phase 440 vol tefc 1440 rpm make crompton or siemens.4. pre-heating tank: made from 2.0 mm thick stainless steel sheet with heater.5. microfine filter: full stainless steel self locking high pressure filter which has poly propylene filters made of 40 micron size,6. processing tank: made from 2.0mm thick stainless steel sheet. one set of coil will be provided for processing tank.7. crompton make water circulation pump 0.50 hp, mono block, with 18 m head, 230 volt ac single phase mechanical seal.8. falling film evaporator: made from 3.0 mm thick stainless steel sheet, with concentric cone in side. subjected to vacuum and ensuring falling film, to evaporate moisture.9. cooling tank: made from 1.5 mm thick stainless steel sheet, exactly same as pre-heating tank but without heaters.10. settling tank: made from 2.0 mm thick stainless steel sheet, top and bottom dished ends fully leak proof, bottom drain for honey withdrawal.11. control panel: having cut off mcb, control circuit fuses, and mcb in each time to protect the wiring, with brass earthing bolt to prevent electric shocks.12. water ring vacuum pump: 1.0 hp, 3000 rpm, 440 volts ac, tefc. kirloskar make with 750+mm 4g vacuum.13. ms chasis made out of 75x40 ms channel in two parts., supply and installation and commissioning of semi automatic volumetric honey filling machine, twin head, stroke typespecification:this is specially designed to fill squash/juice in bottles. all contact parts are made from 304 type stainless steel materials, supported on mild steel angle structure, covered with stainless steel sheet. the machine is suitably arranged to upper and lowering of filling head with nozzle so that there is no spillage of squash or juice while filling. this helps to fill in accurate measure.no bottle no filling system.operated by 1 hp motor with gear box.filling capacity: 100ml to 500 ml.filling speed: 14/16 bottles per minute., 500 ml to 1000 ml, supply and installation and commissioning of twist off lug cap sealing machine:specification:for 100% leak proof airtight sealingno hand pulling system.this machine is ideal way to hermetically seal bottles products with twist off/vacuseallug caps to preserve taste and flavour.semi-auto-manual and pneumatic working.capacity: 600 bottles/hr of 53 to 63 mm caps. (for 200 and 400 gm. pickle)supply is complete with air compressor., supply and installation and commissioning of weight scale digital display specification:capacity: 100 kgreadability: 10 gm, supply and installation and commissioning of digital refractometer, supply and installation and commissioning of shrink tunnel specification:seals pp/pvc shrink film.separate controls for h

CTN :45238287

08 Jun, 2026 1.45 Crore

Dehradune - Uttarakhand

Tender For supply of self regulating heating tape cable e e - title1 , title2 , title3 , title4 , title5 , title6 providing self-regulating heat tape / resistance heating cable suitable for freeze protection of pipelines and utilities, having rated output of 35 w per meter at 220 v ac supply. the heating cable shall automatically adjust its heat output based on surrounding temperature conditions to prevent freezing and overheating. the cable shall be suitable for continuous operation in outdoor conditions, flexible for installation around pipelines, joints and valves, and compatible with temperature controller systems., providing m20 3-pin connector suitable for making secure electrical joints between self-regulating heat cable terminals, designed for reliable power and signal continuity. the connector shall be rated for operation at 220 v ac supply and compatible with heating cables of specified capacity. it shall ensure safe and firm termination, with robust insulation to prevent moisture ingress, short circuits, and electrical leakage.the connector shall be constructed from high-quality, weather-resistant materials, suitable for continuous outdoor operation under varying environmental conditions. it shall provide ease of installation, with a compact and durable design for use at pipeline joints, terminations, and interconnections. the m20 connector shall be compatible with temperature control systems and associated accessories, ensuring long-term performance, safety, and protection against overheating, corrosion, and mechanical stress., providing temperature differential controller with auto and manual operation, housed in a robust ip65-rated enclosure, suitable for controlling heat tracing systems to prevent freezing of pipelines and utilities. the controller shall be designed to automatically switch the heat tape on/off based on preset temperature ) /bid number : gem/2026/b/7550906 * /dated: 18-05-2026 & & / bid document 1 / 13

CTN :45072461

21 May, 2026 NA

Tawang - Arunachal Pradesh

Tender For corrigendum : supply of fd heating sys 2629 d d - 1100 volts grade multi standard copper conductor of size 1.5 sqmm single core frls confirming to is 1554 , cable pvc insulated electric cables heavy duty 1100 volts grade multi stranded copper conductor of size 4 sqmm single core frls confirming to is 1554 part 1 1988 , pvc casing capping of size 3 oblique 4 medium grade snow white make anchor ssk cona , switch piano 5 amp 230 volts flush type one way snow white make anchor ssk cona isi equivalent , led tube light fittings 15w 230v box type 4 feets with crca body pre coated white and prewired for led tuble complete make havells bajaj philips cromption isi equivalent , screw full thread 6 x 19 mm isi marked 200 nos pkt , pvc switch board snow white size 7 inch x 4 inch for sockets and switches db make supreme polycab finolex isi equivalent , pvc switch board snow white size 8 inch x 10 inch for main switches db make supreme polycab finolex isi equivalent , pvc l bend and t junction joint for pvc casing and capping confirming to is 3419 part 3 make supreme polycab finolex isi equivalent , switch socket combination snow white multipurpose 2 in 1 15 amp 230 volts make anchor ssk cona isi equivalent , service bracket 40mm dia gi tubing medium grade 1.5 mtr long make jindal tata kalinga isi equivalent , cement 43 grade opc packed in hdpe bag each 50 kg wt conforming to is 8112 1989 birla gold ambuja ultratech isi equivalent , coarse sand free from vegatative materials , coarse aggregate 20mm graded , coarse aggregate 40mm graded , hardcore 63 to 90mm , mild steel framed work such as truss rafter purlins and ms plate make tata sail jsw isi equivalent , mild steel bars of size 6 to 8mm dia conforming to is 432 part i 1982 make tata sail jsw isi equivalent , mild steel bars of size 10mm and above dia conforming to is 432 part i 1982 make tata sail jsw isi equivalent , the pre painted galvalume aluminium zinc coating gi based corrugated steel sheet 0.50 mm thick an colour having a tensile strength 550mpa of size 10 feet x 3 feet , the pre painted galvalume aluminium zinc coating gi based plain steel 0.50 mm thick an colour having a tensile strength 550mpa. , mild steel self drilling screw with washer size 3 inch isi marked 100 nos per pkt , anti corrosive red oxide zinc chromate primer confirming to is 5 2004 make berger asian nerolac isi equivalent , synthetic paint enamelled black confirming to is 5 2004 make berger asian nerolac isi equivalent , painting brush 3 inch isi marked , ms nut and bolt of length 100 mm fully thread , ms nut and bolt of length 0.45 m 12 mm dia nuts and washers for fdn bolt , iron welding rod confirming to is 814 2002 isi marked 3.15mm thick 100 nos per pkt , ms binding wire panel radiator: supply of wall mounted steel panel radiators of heat output of 3200 kcal/hr,colour), baked in high gloss finish with and including all necessary fittings as per ne 442 standards , m.s made radiator has both core and tank made of mild steel. the radiator supplied should transfer heat from the fluid inside to the aire outside. the radiator will have thermostat control sensor to control the room temparature, make: eurotherm/maktek/bharat works/isi equivalent., boiler: supply of vertical fire tube boilers (heat output of 50000 kcal/hr) (58.02 kw/hr) with stainless steel dampers. the boiler will run on hsd/kerosene and will be rated as per the heat load calculation. the presure rating should be upto 160 pai. now emissions should not exceed 30 ppm. the working temperature should be upto 195 degree pehrenheit. the efficiency of boiler should be not be less than 90% make: bharat works inc of model no: ch-70l of 50000 kcal/hr heat //bid details 2 / 35

State Government

CTN :45131088

20 May, 2026 NA

Surat - Gujarat

Tender For providing and laying road materials and machinery for various road under surat (r&b) division-1, surat. asphalt patch work and miscellaneous work of i.r and c.r. for annual rates (asphalt work) - providing and laying 50 mm thick compacted b.m. in single layer with b.t. aggregate as per morth specification and bitumen grade 60 or 70 (vg-30) for tack coat at 2.5 kg. or 10sq.mt. with mechanical sprayer and bitumen grade 60 or 70 (vg-30) for mixing at the rate 34.0kg or m.t. i.e. 3.4 percentage of total mix including heating the aggregate and asphalt by batch mix plant and spreading the same by manually patch work and consolidation with vibratory roller including providing all materials, equipments, tools and plants, oil, kerosene, fire wood, labour charges etc. complete for surat (r and b sub division no.2 surat), for sub division svr sub division, providing laying 20mm (compacted) thick mix seal surface premixed with bitumen grade 60 or 70 (vg-30) tack coat at 2.5 kg. or 10 sq.mt. with mechanical sprayer and bitumen grade 60 or 70 (vg-30) for mixing at 5.09 percent by weight of total mix and filler, bitumen during preparing of hot mit material in drum mix plant with all taxes and delivery at hot mix plant site, labour charges and or tools required and asphalt by drum mix plant and spreading the same by manually patch work and consolidation with vibratory roller including providing all materials, equipments, tools and plants, oil, kerosene, fire wood, labour charges etc. completefor surat (r and b sub division no.2 surat), for sub division svr subdivision, providing and laying 25 mm thick compacted s.d.b.c.with b.t. stone chips as per m.o.r.t.h. gradation and specification and bitumen grade 80 or 100 for mixing at the rate of 50 kg or m.t.by wt. of mix i.e.(5.0 percentage of total mix) (as per mix design) including the aggregate and asphalt by batch mix mix plant using including heating and spreading the same by manually patch work and consolidation with vibratory roller including providing all materials, equipments, tools and plants, oil, kerosene, fire wood, labour charges etc. complete.for surat (r and b sub division no.2 surat), for sub division svr subdivision, providing and applying asphalt painting on b.t. surface with mechanical sprayer using bitumen 60 or 70 (vg-30) at the rate of 5.00 kg or 10 sq.mt. and spreading stone dust on painting surface at the rate of 0.03 cu.m. or 10 sq.mt. and rolling with smooth wheeled and pneumatic roller and brushing etc. complete. for surat (r and b sub division no.2 surat), for sub division svr subdivision

State Government

CTN :44771707

20 May, 2026 NA

Wardha - Maharashtra

Tender For corrigendum : supply of electrical materials for the building store - bus bar 32amp 415v, ma+b8:b12ke ashok (aluminium), bus bar 63amp 415v, make-ashok (aluminium), bus bar 100amp 415v, make- ashok (aluminium), bus bar 200amp 415v, make- ashok (aluminium), bus bar 300amp 415v, make- ashok (aluminium), bus bar 400amp 415v, make- ashok (aluminium), coil 1.5 kw kettle element (panja coil)1500w make-ramson, coil 2 kw kettle element make-ramson, coil cup midset heating elements 3000w 230v 50hz ac isi mark, coil triangular tsp heating elements 2000w 230v 50hz ac isi mark, thermostat geyser 7 inch isi, thermostat geyser cut out 7 inch isi, contactor mnx-250, 3 pole ,make-l&t, c.i. plate 2ft x 2ft x 5mm for earthing isi, domestic gang box 1 way, make anchor cat. no. 7305, domestic gang box 2 way, make anchor cat. no. 7112, surface modelling gang box 1 way, make- anchor cat no. 7010, earthing powder 20 kg bag isi, halogen tube 500w, local, halogen tube 1000w,local, halogen holder local, pvc elbow 19mm, make superflast, pvc elbow 25mm, make superflast, pvc tee 19mm, make- superflast, pvc tee 25mm, make- superflast, rocor switch 6a isi, wire cutter taparia, winding sleeve 1 no isi, winding sleeve 2 no isi, winding sleeve 3 no isi, winding sleave 4 no isi, winding sleave 5 no isi, winding sleeve 6 no isi, winding sleeve 7 no isi, winding sleeve 8 no isi, led street light 220w cat no lr02-262-xxx-57-xx, make-wipro, led street light 250w cat no lr02-292-xxx-57-xx, make-wipro, led flood light 250w -cat no. lf20-342-060-57-xx, make-wipro, 3core flat cable submersible,16 sq.mm., make-finolex, 3core flat cable submersible , 25.sq.mm., make-finolex, 3.5cx25sq.mm. cu armoured cable, make- polycab, led torch rechargable 3 w cord cat- cl0004, make- wipro, cable cord 3 mtr. long, tds meter - ro water checking make wellon, geyser 25 litre white colour make havells, aluminum lugs 10 sq. mm. (u-type-heavy), aluminum lugs 16 sq. mm (u-type-heavy), aluminum lugs 25 sq. mm (u-type-heavy), aluminum lugs 35 sq. mm (u-type-heavy), aluminum lugs 50 sq. mm (u-type-heavy), aluminum lugs 70 sq. mm (u-type-heavy), aluminum lugs 95 sq. mm (u-type-heavy), aluminum lugs 120 sq. mm (u-type-heavy), aluminum lugs 150 sq. mm (u-type-heavy), aluminum lugs 240 sq. mm (u-type-heavy), aluminum lugs 300 sq. mm (u-type-heavy), battery lugs brass isi, battery lugs 14 sq. mm isi, battery lugs b/r sq. mm isi, battery lugs s/r sq. mm isi, amp meter 0 to 30a 4 (analogue/digital), amp meter 0 to 60a 4 (analogue/digital), bulb 15w (zero), make- wipro, blade cooler fan metal 24 , coil cup midset heating elements 3000w 230v 50hz ac isi mark, coil triangular tsp heating elements 2000w 230v 50hz ac isi mark, thermostat geyser 8 inch isi, thermostat geyser cut out 8 inch isi, coil heater element (1500 w) isi, contactor mnx-63, 3 pole ,make-l&t, contactor mnx-100, 3 pole ,make-l&t, contactor mnx-125, 3 pole ,make-l&t, contactor mnx-18, 4 pole ,make-l&t, contactor mnx-32, 4 pole ,make-l&t, contactor mnx- 40, 4 pole ,make-l&t, contactor mnx-63, 4 pole ,make-l&t, contactor mnx-100, 4 pole ,make-l&t, contactor mnx-125, 4 pole ,make-l&t, contactor mnx-250, 4 pole ,make-l&t, contactor mnx- 25, make-l&t, contactor mnx- 40, make-l&t, contactor mnx- 41, make-l&t, contactor kit complete mnx- 40, make-l&t, contactor kit complete mnx- 41, make-l&t, copper lugs 20 sq. mm (ring type-heavy), copper lugs 10 sq. mm (utype-heavy), copper lugs 20 sq. mm (utype-heavy), copper lugs 16 sq. mm (utype-heavy), copper lugs 25 sq. mm (utype-heavy), copper lugs 35 sq. mm (utype-heavy), copper lugs 4 sq. mm (utype-heavy), copper lugs 6 sq. mm (utype-heavy), copper lugs 50 sq.mm (utype-heavy), copper lugs 20 sq. mm (pintype-heavy), contactor 40a ,make-l&t, clamp bush 15 inch for exhaust fan isi, clamp bush 18 inch for exhaust fan isi, clamp bush 24 inch for exhaust fan isi, igniter s.v,.make-dolor, mccb 3 pole, 800a ,make-l & t dn3b, mccb 4 pole,

Thermostat Over Heat Protector Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

State Government