Latest thermostatic valve Tenders | Government thermostatic valve Tenders

Central Government/Public Sector

CTN :45728357

23 Jul, 2026 NA

Multi City - Multi State

Tender For supply of set of hose assembly for hod connection, consisting of 02 items as:-(1) hose assembly oil pressure line to the thermostatic valve as per dlw drg. no. 9575347 alt-aa or latest; to emd part no. 9575347 & dlw part no.16360151. qty/set - 01 no. drawing attached. (2) hose assembly thermostatic valve high-pressure line as per dlw drg. no.9575346 alt-aa or latest; to emd part no. 9575346 & dlw part no.16360140. qty/set- 01no.drawing attached. [ warranty period: 30 months after the date of delivery ] ]

CTN :45592297

01 Jul, 2026 30.00 Lacs

Pahalgam - Jammu And Kashmir

Tender For corrigendum : supply installation testing and commissioning of pump unit and other electro-mechanical equipments at laripora pahalgam - supply, installation, testing and commissioning of submersible type pump sets with motors and allied mechanical and electrical components/ items as per manufacturer s recommendations and guide lines, and as per the scope of the work at site. the equipment supplied conform to latest is- standards and codes with fail safe circuits/ devices for(i) over loading (ii) under loading (iii) clogging (iv) shut off (v) low liquid level (vi) single phase prevention devices (vii) over heating etc. the pumping units shall have following technical specifications: pumps:type of pump :non clog centrifugal volute type sewage submersiblepumpscapacity= 28.4lpshead = 17.5 metres or abovesolid handling capacity: 20mm (minimum) quality of water: sewage water to be handled meterial of construction:pump casing : cast ironimpeller : stainless steelpump shaft : stainless steelmotor body : cast ironsealing : dual mech. seal...contd.. as per annexure-a, providing/supplying and fitting of 100 mm m.s flanged delivery main to be connected with existing rising main at site. the job includes providing and welding of m.s flanges 12 mm thickness. the flanges shall be double welded both from inside and outside of the pipe using standard electrode of reputed make. the cost on account of supply/ fabrication of bends and providing/ fitting of flanges is included in the job. (complete job)., providing and fitting of 100 mm dia ductile iron double flanged, non-rising spindle soft seated glandless gate/ sluice valves as per is14846 for regulating the water supply outside the pumping units p.n rating 1.0.the job includes providing and fitting of 02 nos. m.s flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement (complete job)., providing and fitting of 100 mm dia ductile iron double flanged, slanted seat swing check valve( nrv) as per is 5312 p.n rating 1.0.the job includes providing and fitting of 02 nos. m.s flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement (complete job)., gantry over sump :- fabrication, providing, fitting of ms gantry over sump with 02 nos. vertical columns. the gantry fabricated out of ismb-100, 3.25 mts long placed face to face. 300x300mm ms plates 12mm thick fitted on top and bottom side of column .bottom plate welded to the reinforcement of the sump and grouted in 1mx1mx1m pcc 1:1.5:3 mix. ismb-100,3mts long is to be placed and welded to the top plate of the columns .the job also includes providing and fitting of 2-tonne capacity chain pulley block with monorail along with hoisting chain (complete job)., providing and fitting of 50 mm23.5 core ,al pvc insulated cable, armouredfor internal connectionscrimping, taping etc. note:- the cable terminal ends for connection to switchgear at various requisite points shall be al. thimbles and of appropriate size and connected by hydraulic crimp tool only (complete job)., providing and fitting of 4-core 16 mm2 flat /circular submersible copper cable conforming to is: 694 (part 1st) 1964 & is: 694 (part 2nd) - 1964 for submersible pumping unit and other electrical equipment s. the cable connections terminal shall be fitted with copper thimbles of required size (complete job)., fabrication, providing and fitting of main electric control panel of appropriate size fabricated out of 14 swg sheet having required openings/vents and protection class : ip-55 & fitted with accessories as under: a) bus bar chamber: 160 amperes(tpn) b) main circuit breaker (incomer mccb) qty:- = 01 nocurrent rating = 160 amp. c) change over switch:qty. = 01 no.rating = 160 ampere....contd... as per annexure-a., electrification. providing/fitting of lighting and fan

Central Government/Public Sector

CTN :45616728

06 Jul, 2026 NA

Lucknow - Uttar Pradesh

Tender For supply, installation & commissioning of hot oil detector thermostatic valve test bench with following item as per annexure-a attached. [ warranty period: 30 months after the date of delivery ] ]

Private Sector

CTN :45623944

10 Jul, 2026 NA

Ranchi - Jharkhand

Tender For mother dairy fruit & vegetable private ltd. food processing unit (fpp) have a requirement of cpvs full-service kit 9096940533, unloader valve kit 2901162200, oil stop valve kit 9096940529 air comp., cp air comp.min.pre-valve kit-2901906000, thermostatic valve kit for cp air comp., rotair advance 20l part no.: 1630144520, hose assembly 0574 800 129 air comp., hose assembly 0574 9911 04 air comp., hose assembly 0574 9918 20 air comp., air comp. flexible hose 0574 9911 44, hose assembly 0574 800 133 air comp., flexible 0574 8001 35 air compressor, valve housing 1613 8043 00 cp a.comp., solenoid valve for cp a.comp. 1089062110, air filter bracket 1613740100 air comp., line filter pre for cp air compressor, line filter post for cp air compressor ft as per attached detailed boq.

CTN :45617340

29 Jun, 2026 NA

Jamnagar - Gujarat

Tender For supply of bush , reverse switch , air filter , horn 12 v , piston with ring , packing kit , rear brake shoe , oil filter , piolet bearing , thermostatic valve , self connector bolt , bulb 21w 5v , cushion rubber , rear wh oil seal , front disc pad , bonet cable , wh cyl kit , alternator belt , head bulb

CTN :45597887

29 Jun, 2026 178

Multi City - Karnataka

Tender For supply of water supply items to kirugavalu grama panchayat - ½" pvc pipe bend, ¾" pvc pipe bend, 1" pvc pipe bend, 1¼" pvc pipe bend, 1½" pvc pipe bend, 2" pvc pipe bend, 2½" pvc pipe bend, 3" pvc pipe bend, 4" pvc pipe bend, ½" pvc tee, ¾" pvc tee, 1" pvc tee, 1¼" pvc tee, 1½" pvc tee, 2" pvc tee, 2½" pvc tee, 3" pvc tee, 4" pvc tee, 2" service saddle (63x20mm), 2½" service saddle (75x20mm), ½" gi elbow & collar, ¾" gi elbow & collar, 1¼" gi collar, 1¼" gi bend, 2" gi bend, 2½" gi bend, 2" gi collar h/v, 2½" gi collar h/v, 2" gi non return valve, 2½" gi non return valve, ½" gi pipe nipple 1 feet, ¾" gi pipe nipple 1 feet, 2" gi pipe nipple 1mtr, ½" pvc pipe, ¾" pvc pipe, 1" pvc pipe, 1¼" pvc pipe, 1½" pvc pipe, 2" pvc pipe, 2½" pvc pipe, 3" pvc pipe, 4" pvc pipe, ½" pvc elbow, ¾" pvc elbow, 1" pvc elbow, 1¼" pvc elbow, 1½" pvc elbow, 2" pvc elbow, 2½" pvc elbow, 3" pvc elbow, 4" pvc elbow, ½" pvc pipe collar, ¾" pvc pipe collar, 1" pvc pipe collar, 1¼" pvc pipe collar, 1½" pvc pipe collar, 2" pvc pipe collar, 2½" pvc pipe collar, 3" pvc pipe collar, 4" pvc pipe collar, 2" pvc joint collar, 2½" pvc joint collar, 3" pvc joint collar, ½" pvc ball valve, ¾" pvc ball valve, 1" pvc ball valve, 1¼" pvc ball valve, 1½" pvc ball valve, 2" pvc ball valve, 2½" pvc ball valve, 3" pvc ball valve, 4" pvc ball valve, ¾" cpvc pipe, 1" cpvc pipe, ¾" cpvc elbow & collar, 1" cpvc elbow & collar, ¾" cpvc tee, fta, mta, 1" cpvc tee, fta, mta, cpvc gum 29ml, ¾" cpvc ball valve, 1" cpvc ball valve, ¾" cpvc union & tank nipple, 1" cpvc union & tank nipple, solvent cement, solvent cement, solvent cement, ½" pvc mta & fta & end cap, ¾" pvc mta & fta & end cap, 1" pvc mta & fta & end cap, ¼" pvc mta & fta & end cap, ½" pvc mta & fta & end cap, 2" pvc mta & fta & end cap, ½" pvc mta & fta & end cap, 3" pvc mta & fta & end cap, gargen pipe ¾", gargen pipe 1", 2hp v4 sm motor pump 20stage, 3hp v4 sm motor pump 30stage, ¼" hdpe pipe, ½" hdpe pipe, hdpe end connector, stick & paper, thrust bearing & bottom, impellers, rotor bush, do bush, stg bush, ¼" gi pipe, plunger rod 3 meter, gm upper valve, gm lower valve, borewell handle, borewell head, borewell water tank, borewell pedestal stand, ¼" gi collar long, mcb 4 pole, bolt nut 5/8", bolt nut 3/8", nrv lather, x nipple, m-12 boltnuts, bucket washer, cylinder, ½" gi tap, ¾" gi tap, hp motor pump with 10 stage, 7.5 hp motor pump with 12 stage, 10 stage pump, 12 stage pump, 7" cassing pipe, shalk thrid, mrf tape, pcv tape roll, 1.2 mm rewinding copper wire, 2" bore clamp, ½" bore clamp, 2" gi pipe, 4sqmm 3core copper cable flat type, dol electrical panel board, sada electrical panel board, relay ltlk, electrical contact kit, contactor unit, no volt coil, amps meter, volt meter, indicator, dol starter m, dol starter ltlk, 63amps fuse unit, 100amps fuse unit, 7.5hp preventor, 7.5hp-15hp preventor, relay unit-motor, 5" pvc pipe, 5" repair collar, 5" pvc elbow, 5" pvc pipe bend, 5" pvc tee, 5" mta, 5" fta, 5" pvc collar, 6" pvc pipe, 6" repair collar, 6" pvc elbow, 6" pvc pipe bend, 6" pvc tee, 6" plain end, 6" mta, 6" fta, 6" pvc collar, 6" threaded end cap, motor rewinding labour+ worshop turning fitting, charges, motor lifing erection and service fitting, hand pump lifting erection and service, starter board wiring electrical service and fitting, over tank gateawall gm rad leath tredded charge and service

Central Government/Public Sector

CTN :45593503

19 Jun, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - 98080106: cond. & u/s. signal items and ms/ci/gi item scrap consisting of point machine, ground connection, , point machine base, lock rod,contactor unit parts, other point machine parts, loco parts, gears, slide cover, cams, ms rotors, beaters, bars, ms rod/angle /channel/pipe cut piece, bm box, pipe fittings, screw couplings, coupling hook, signal three aspects, signal two aspects, cast iron components, pressure tank, augers, dip lorry, ms trolly, tension rod, plate, large pipe,signal post, fastners, pick axe, beaters, crow bars, lever, train coach door broken parts, ms stand, weighing set, traction motor case, compressor case, compressor valve, ms tank, nut, bolt, tool box, ci linked pots, chain, damper, l c gate parts and tap, valve, gear case, flat rod, ms trolley, rottery key, grill, pulley, air filter,cut of angle cock,knuckle pin,wearing plate,cp bottom,ci part, fencing, hood, boiler tube, winch wheel, lc gate parts, steel rope, ladder, battery boxes, frames, ms boxes, ring, ci foundation ct boxes, loco liner, buffer, buffer case, buffer plunger,icf buffer complete set, piston, piston cylinder,weigh machine, connecting rod, signal posts with or without base, bearing case, tension rod, cam shaft,ms cut pieces,pipes, storng part with diabar ms attachment,pure iron flats,pump case, pta parts,shock absorber,e type lock,d bracket,axle box housing,end shield,cast iron component, trolly parts, hyd scissors table,air suspension system, pipe,ladder, pantograph parts, sack barrow,winch for lb gate,l angle,gate boom,rail wheel barrow,nozzle pricker, ms hood tap and such other similar signal,cut pieces of mast, loco and c&w items with or without non ferrous and other attachments as is where is condition. note: (1) if any non- ferrous items found in loose in the location to be handed over to custodian at the time of delivery, (2) crane/jcb loading permitted (3) cutting permitted to loadable size at the time of delivery (4) electronic weighbridge capacity 30 mts only. hence purchaser should bring suitable vehicle so that the loaded weight should not exceed 28 mts at the time of delivery. locotion: w-6& 7 of scrap yard/ssd/ptj.

Central Government/Public Sector

CTN :45578759

07 Jul, 2026 10.84 Lacs

Ganjam - Odisha

Tender For supply of compressor model - kes-75 s-7.5 ac sl no. scr0002025, pressure transmitter, 4 to 20 ma, 8.2 to 34 v dc, 0-16 bar. , compressor model - kes-75 s-7.5 ac sl no - scr0002025, temperature sensor pt-100 , compressor model - kes-75 s-7.5 ac sl no - scr0002025, intake valve assembly , compressor model - kes-75 s-7.5 ac sl no - scr0002025, solenoid valve, nc type, 14 bar , compressor model - kes-75 s-7.5 ac sl no - scr0002025, proportional controller p3ne , compressor model - kes-75 s-7.5 ac sl no - scr0002025, microcontroller , compressor model - kes-75 s-7.5 ac sl no - scr0002025, service kit of valve minimum pressure , compressor model - kes-75 s-7.5 ac sl no - scr0002025, service kit for intake valve hdkg120 , compressor model - kes-75 s-7.5 ac sl no - scr0002025, element, thermostatic valve of 273.10.393.50. r4 and r5 , compressor model - kes 75-7.5 elec sl no - scr0004770, pressure transmitter, 4 to 20 ma, 8.2 to 34 v dc, 0 - 16 bar , compressor model - kes 75-7.5 elec sl no - scr0004770, rtd, weatherproof, pt-100, 3 or 8 inch bsp m screwed, im-adjustable length , compressor model - kes 75-7.5 elec sl no - scr0004770, solenoid valve, nc type, 14 bar , compressor model - kes 75-7.5 elec sl no - scr0004770, regulator-p3ne , compressor model - kes 75-7.5 elec sl no - scr0004770, service kit of valve minimum pressure , compressor model - kes 75-7.5 elec sl no - scr0004770, service kit for intake valve hdkg120 , compressor model - kes 75-7.5 elec sl no - scr0004770, element, thermostatic valve of 273.10.393.50. r4 and r5 , compressor model - kes 75-7.5 elec sl no - scr0004770, compressor controller, microprocessor based 24vdc for screw , compressor model - kes 75-7.5 elec sl no - scr0004770, analogue module, 4 ch. universal analog voltage or current or pt100. , compressor model - kes 75-7.5 elec sl no - scr0004770, communication port, 1 ch.rs 422 serial , compressor model - kese160-7.5i sl no - scr0007362, compressor controller, microprocessor based 24vdc for screw , compressor model - kese160-7.5i sl no - scr0007362, analogue module, 4 ch. universal analog voltage or current or pt100. , compressor model - kese160-7.5i sl no - scr0007362, communication port, 1 ch.rs 422 serial. , compressor model - kese160- 7.5i sl no - scr0007362, pressure transmitter, 4 to 20 ma, 8.2 to 34 v dc, 0 - 16 bar , compressor model - kese160-7.5i sl no - scr0007362, kit service, servo cylinder, r5, refer 274.02.857.50 , compressor model - kese160-7.5i sl no - scr0007362, kit service, proportional controller, r5, refer 274.02.857.50 , compressor model - kese160-7.5i sl no - scr0007362, kit service, solenoid coil, r5, refer 274.02.857.50 , compressor model - kese160-7.5i sl no - scr0007362, assembly air intake valve, kese 110, 132, 160 , compressor model - kese160-7.5i sl no - scr0007362, kit service, suction controller, r5, refer 274.02.857.50 , compressor model - kese160-7.5i sl no - scr0007362, kit service, venting valve, r5, refer 274.02.857.50 , compressor model - kese160-7.5i sl no - scr0007362, servo cylinder for intake valve 274.07.037.50. 5235792 //bid details 2 / 33

Central Government/Public Sector

CTN :45574594

07 Jul, 2026 10.84 Lacs

Ganjam - Odisha

Tender For supply of instrument spares for kirloskar make air compressor - pressure transmitter, 4 to 20 ma, 8.2 to 34 v dc, 0 - 16 bar., temperature sensor (pt-100), intake valve assembly, solenoid valve, nc type, 14 bar, proportional controller p3ne, microcontroller, service kit of valve minimum pressure, service kit for intake valve hdkg120, element, thermostatic valve of 273.10.393.50. r4 & r5, pressure transmitter, 4 to 20 ma, 8.2 to 34 v dc, 0 - 16 bar, rtd, weatherproof, pt-100, 3/8'' bsp(m) screwed, im-adjustable, length, solenoid valve, nc type, 14 bar, regulator-p3ne, service kit of valve minimum pressure, service kit for intake valve hdkg120, element, thermostatic valve of 273.10.393.50. r4 & r5, compressor controller, microprocessor based 24vdc for, screw, analogue module, 4 ch. universal analog, voltage/current/pt100., communication port, 1 ch.rs 422 serial., compressor controller, microprocessor based 24vdc for, screw, analogue module, 4 ch. universal analog, voltage/current/pt100., communication port, 1 ch.rs 422 serial., pressure transmitter, 4 to 20 ma, 8.2 to 34 v dc, 0 - 16 bar, kit service, servo cylinder, r5, refer 274.02.857.50, kit service, proportional controller, r5, refer 274.02.857.50, kit service, solenoid coil, r5, refer 274.02.857.50, assembly air intake valve, kese 110, 132, 160, kit service, proportional controller, r5, refer 274.02.857.50, kit service, suction controller, r5, refer 274.02.857.50, kit service, venting valve, r5, refer 274.02.857.50, kit service, solenoid coil, r5, refer 274.02.857.50, kit service, servo cylinder, r5, refer 274.02.857.50, servo cylinder for intake valve 274.07.037.50. ( 5235792 )

CTN :45525969

23 Jun, 2026 NA

Rohtak - Haryana

Tender For supply of compresor spare - hp cylinder 15 t make ir, air compressor 32218182 piston ring set 3.5 make- ir, air compressor 32158925oil seal 15 t make- ir, valve & spring plate set 15 t make ir, 32003659 connecting rod, hp make- ir, gasket set complete 15 t (csc) make- ir, o ring csc make- ir, air compressor material 32295875 bushing 15t/15t2/3000/15v/15vt make- ir, lp cylinder 15 t make- ir, air compressor material 32198376 piston ring set 5.0 t line make- ir, air compressor material 32003659 connecting rod, lp make- ir, air compressor material 30416853 spring, unloader piston pin make- ir, air compressor material 32012395 spring, unloader pin make-ir, air filter element filter, part no. 32012952 make- ir, auto drain valve part no.270.03.813.50 for air compressor make- kirlosker, kirloskar compressor, part no. 270.02.476.50 make- kirloskar, t-30 oil for ir make air compressor, kirloskar compressor oil part no. 270.02.478.50 one qty. bucket=20 ltr. make- kirloskar, pressure transmitter part no. 211.09.286.50 make- kirloskar, pressure safety valve, part no. 030.48.116.00 make- kirloskar, servo cylinder, 270.03.811.50 make- kirloskar, service kit of valve minimum pressure, 270.01.765.50 make- kirloskar, service kit, air intek valve 270.01.189.50 make- kirloskar, temp. sensor rtd, part no. 211.12.779.50 make- kriloskar, air compressor, part oil stop valve/check valve kit, 2901203900 make- chicago pneumatic, air compressor, part minimum pressure valve kit 2901906000 make- chicago pneumatic, air compressor, shaft seal kit 2901202700 make- chicago pneumatic, air compressor, motor bearing kit 9096940527 make- chicago pneumatic, air compressor, hose pipe 0574800115 make- chicago pneumatic, air compressor, element mounting kit 2901201900 make- chicago pneumatic, air compressor part- unloader valve kit 2901162200 make- chicago pneumatic, air compressor part- hose pipe 0574991128 make- chicago pneumatic, air compressor part- hose pipe 0574991124 make- chicago pneumatic, air compressor part- hose pipe 0574800116 make- chicago pneumatic, air compressor part- hose pipe 0574800129 make- chicago pneumatic, air compressor part- thermostatic valve 9096940521make- chicago pneumatic, air compressor part- cpb 40 air compressor air filter make- chicago pneumatic, air compressor part- cpb 30 air compressor air filter make- chicago pneumatic, cpb 40 air compressor oil filter make- chicago pneumatic, cpb 30 air compressor oil filter make- chicago pneumatic, cpb 40 air compressor air oil seperator make- chicago pneumatic, cpb 30 air compressor air oil seperator make- chicago pneumatic, cpb 40 air compressor pressure sensor make- chicago pneumatic, cpb 30 air compressor, pressure sensor for air compressor make- chicago pneumatic

Thermostatic Valve Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Private Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector