Latest thermovision scanning Tenders | Government thermovision scanning Tenders

State Government

CTN :45275642

02 Jun, 2026 3.07 Lacs

Serampore - West Bengal

Tender For repairing and overhauling of one no twin lobe air blower assembly and renovation of 2 nos outgoing motor (blower ) feeder of lt pdb with supply, fitting and fixing spares at sludge pump house under swtp, kmda. - supply,installation,testing and commisioning of following items for hoisting system/ blower and gear box as mentioned below as per direction including cost of materials, machinaries , manpower, cutting,machining,aligning,anchoring,welding,finishing,consumables, carriage and all overheads with all leads and lifts complete as per specification (without painting), i) base frame (ms), ii) shaft/pin with key ways made of ss-304, iii) gear& pinion (forged steel), supply and fixing the 3way c.i v grooved pulley with complete mechanism key way suitable to en-24, 60 mm dia/ as per sample of shaft end., a) motor driving, b) blower driving, supply of gear oil as per direction of engineer in charge., supply of grease, supply and delivery of the following bearing (make: skf):, i) 22312e/c3/ as per sample. (for blower), supply and fixing of tough v belts (make: fenner/power boom / v guard/benq/ecodrive) of the following size c 98/ as per sample., supply fitting fixing of ss (aisi304) bolts,nut & washer i) dia 10 mm to 20 mm a) length upto 75 mm, refixing of impeller of blower after dynamic balancing in workshop as per is rule after dismantling the same., dismantling the 25/30 h.p (18.5 kw)//30 h.p squirrel cage motor from its foundation by opening mounting bolts and disconnection of cables from terminal box and open the v belts for repairing purpose (in condition), preliminary checking of the whole motor (lt sq. cage im) and testing of i.r. value, load currents, leakage factor of stator & rotor, terminal lead joints of stator connection ends, insulation of glass fibre terminal bar, double cage rotor end rings and all of motor bars and bar joints, housing of d.e. & nde shield bearing housing etc. before work to detect fault., complete servicing and heat varnishing of 415volt, 3 phase l.t. sq. cage induction motor after cleaning the stator and heating it up periodically and varnishing by dr. beck s graded insulating varnish to obtain stable ir value, cleaning up the rotor, including heating for demoisturisation, lacker coating on the surface of rotor stampings, cleaning and ro priming on the end shield covers, bearing housing and complete the necessary repairing works as per direction of e.i.c.upto 75kw lt sq. cage im ], re fixing the 25/30h.p star/delta squirrel cage motor over its foundation by mean of mounting bolts & nuts, washer complete connection of existing led of cable at the terminal box and wear the v belts with proper alignment in respect to i.d. fan (12000 cu m/hr capacity)/ blower by adjusting the side rail for smooth running., finishing the end of terminal leads by s & f dowells copper sockets properly supplying tapes, petrollium jelly etc. 6 nos.upto 75kw lt sq. cage im., cost of mechanical work viz. shaft truness, checking key way looping of holes grinding and polishing etc. upto 75kw lt sq. cage im., inspection checking/testing and servicing of the existing starter panel, all terminal connection, contactors, relays etc as per desired technical specification including man and minor materials for proper functioning as per direction of eic., supply and fixing of 240/230 volt, 50 hz, t.p., power contactor (make: l & /abb/schneider/ simence/ ge) having contact block of the following range.32-55amp, supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) blue/ white color., supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) other than blue/ white color., supply and delivery of thermal overload relays (make: l & t/abb/schneider/simence/ ge/minilec) of the following range:a) 0.2-0.33/ 0.3-0,5/ 0.45-0.75, mn2, supply of ammeter selector switch current in each phase with off, 4 pos. 90 angle ofthrow (off-r-y-b) , supply and fixing of analog ammeter ranging

State Government

CTN :45289480

30 May, 2026 NA

Palamau - Jharkhand

Tender For renovation of electro mechanical items for rural ws scheme, lesliganj - part a (raw water p/plant mali river at sitadih ), cost towards repairing and overhauling of 50 h.p. v.t. pump set multiple stage ball assembly s/f impeller g.m. bush as per sample 5 nos each, s/f housing bush as per sample. replace in spider rubber cutless bush 5 nos, replacing of 25mm dia. 5 feet long s.s. line shaft 4 nos with s.s. socket . transportation charge from site to work shop vice versa including tools tackles and labour charges for lifting & lowering v.t. pump before and after repairing work etc all complete at pumping plant., supplying all labour tools and tackles for complete opening, dismantling , cleaning of its slots of stator by brush & petrol then complete rewinding of 50 h.p. 440 volts, 50 c/s, star delta, 3 phase hollow shaft v.t. motor by supplying super enameled copper wire & binding, tapping varnishing, heating, testing on full load and repairing of stator & rotor, changing of bearings as per sample skf make with including the deduction of cost of burnt copper wires and transportation charges from p/plant to workshop and back to the same . including tools & tackles and labour charges etc all complete at p/plant., cost towards repairing/ replacement of 200 amp motor control panel board consisting of incoming feeder mccb 200 amp 1 no. and outgoing feeder mccb 100 amp 2 nos, timer 1 no., thermal over load release relay 2 nos. supplying and fitting of digital volt meter (0-500v) squared type 2 nos, ammeter (0-125amp) squared type 2 nos and replacement of phase indicator lamp 3 nos. including internal wiring etc all complete., cost towards supplying & fitting 35 mm2 3 core copper conductor 15 mtr panel to motor., cost towards supplying & fitting 60 watt led street light (jsor-m840), part b (clear water lesliganj.), cost towards repairing/ replacement of 200 amp motor control panel board consisting of incoming feeder mccb 200 amp 1 no. and outgoing feeder mccb 100 amp 3 nos, timer 1 no., thermal over load release relay 3 nos. supplying and fitting of digital volt meter (0-500v) squared type 2 nos, ammeter (0-125amp) squared type 2 nos and replacement of phase indicator lamp 3 nos. including internal wiring etc all complete., supplying all labour tools and tackles for complete opening, dismantling , cleaning of its slots of stator by brush & petrol then complete rewinding of 20 h.p. 440 volts, 50 c/s, star delta, 3 phase induction motor by supplying super enameled copper wire & then tapping varnishing, heating & testing on full load and repairing of stator & rotor, changing of bearings as per sample skf make with including the deduction of cost of burnt copper wires and transportation charges from p/plant to workshop and back to the same . including tools & tackles and labour charges etc all complete at p/plant., cost for repairing of 20 h.p. c/f pump with m/s/f s.s. shaft as per sample 1 no. c.i. gland tightner 2 nos, c.i. bearing housing 2 nos, ms. check nut 2 nos, c.i. neckring 2 nos, ball bearing s.k.f. as per sample 2 nos, all labour tools & tackles and materials with loading and unloading transporting charge from site to workshop & vice versa., cost towards varnishing, heating of winding & greasing of both side ball bearing of 25 h.p. induction motor 3 phase, 1440 rpm, volt 410 10% 50 cycle along with supplying & fitting of tyre coupling 2 nos, then testing on full load at site including supply of all labour tools and tackles., cost for repairing of 25 h.p. c/f pump with m/s/f s.s. shaft as per sample 1 no. c.i. gland tightner 2 nos, c.i. bearing housing 2 nos, ms. check nut 2 nos, c.i. neckring 2 nos, ball bearing s.k.f. as per sample 2 nos, all labour tools & tackles and materials with loading and unloading transporting charge from site to workshop & vice versa., supplying all labour tools and tackles for complete opening, dismantling , cleaning of its slots o

corporations/Associations/Others

CTN :45294905

03 Jun, 2026 2.97 Lacs

Kolkata - West Bengal

Tender For supply and installation of various electrical equipments in place of burn out and damaged ones at different panels and allied works at shanagar burning ghat. - supply and delivery of mccbs with thermal magnetic release breaking capacity thermal release rang 125-160a, breaking capacity icu at 415v ac, 50hz, 50ka4pole , supply and delivery of thermal overload relays (make: l & t/abb/schneider/simence/ ge/minilec) of the following range: 24-40, mn2, , power contactors: supply and fixing the power contactor t.p 70a, l & t make (ml-4) having 240v, 50hz, coil incl. 2 no + 2 nc aux contact block., , power contactors: supply and fixing the power contactor t.p 16a, l & t make having 240v, 50hz, coil incl. 1no+1nc aux contact block., , supply & fixing of 415/440 volt, hrc fuse (make: l&t/havels/cgl/ge).for 250 amp supply and fixing of analog ammeter ranging 0-100amps having c.r ratio of 100/5a, 144 mm sq size (make: ae/kappa/mp)., , supply and fixing of analog voltmeter ranging from 0-500 v of 144 mm sq size (make: αε/καрралмр)., , supplying and fixing 415v, tpn sfu open execution in existing ss enclosure/cubical with nuts bolts etc incl. s & f 3 nos. din type hrc fuse as per rating. 125a siemens, , supplying and fixing 240/415 v mcb of breaking capacity 10ka & c characteristics on din rail of existing dbs and necessary connection legrand 63 a fp, , supplying of 1.1 kv. grade pvc insulated conductor of following cables (make: polycab/gloster/havells/):size in sq. mm, no & dia. of wire in mm, no of core - 4 1/2.24 3, , annexure - i basic rate of materials: (all rates of materials from k-1 to k-14 are excluding vat) 70.1.5 sq.mm 'fr' stranded copper wire, , compression glands.supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture(proof entry of xlpe/pvc armoured cables as below: for, , 3 core.(i)upto 4 sqmm, , finishing cable ends.(b)finishing the end of following xlpe/pvc, , armoured cables by crimping method incl. supplying and fixing solderless socket (dowels make), tapes, anticorrosive paste & jointing materials. (ii) 2 core 6 sqmm cable, , temperature controller: a) supply and fixing the digital type temperature controller of range (0-1200) deg. c of overall dimension 92 sq mm dia x 105mm depth having (cr-a1) heat sensor and 1 no + 1 n.c change over contact to be actuated at crossed of desired temperature in deg.c complete power supply unit of 230v 50 hz., , blue max make

State Government

CTN :45304161

30 Jun, 2026 NA

Parganas - West Bengal

Tender For internal electrical installation and wiring of newly constructed administrative building including supply of all materials at barasat 220kv s/s under barasat area office, wbsetcl as per schedule - supplying and fixing double door vertical tpn 160a mcb distribution board (8way), for mccb incomer with ip-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. pwd sch page d-11 item no 15. (legrand make) , supplying and fixing 415 v 125 a (4p) four pole mccb of breaking capacity 25ka/35ka with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing dbs / enclosure and necessary connection. pwd sch page d-08 item no 10. (legrand make), , supplying and fixing 240/415 v sp mcb (6-32)a (for out going) of breaking capacity 10ka & c characteristics on din rail of existing dbs and necessary connection. pwd sch page d-6 item no 07. (legrand make), , single phase lighting distribution, , supplying and fixing double-door (2+12 way) spn mcb distribution board with ip-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. pwd sch page d-9 item no, , supplying and fixing 240/415 v 32a dp mcb (incommer) of breaking capacity 10ka & c characteristics on din rail of existing dbs and necessary connection. pwd sch page d-6 item no 07., , supplying and fixing 240/415 v (6-32)a sp mcb (out going) of breaking capacity 10ka & c characteristics on din rail of existing dbs and necessary connection. pwd sch page d-6 item no 07., , point wiring, , distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'fr' pvc insulated & unsheathed single core stranded copper wire (brand approved by eic) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with modular type switch (brand approved by eic) fixed on modular gl switch board with top cover plate flushed in wall incl. mending good damages to original finish. pwd sch page e-20 item no 1. (iii) (average run 8 mtrs), , point wiring on board, , distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'fr' pvc insulated & unsheathed single core stranded copper wire (brand approved by eic) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 v 6a 5 pin plug point incl. s&f 240 v 6a 3 pin modular type plug socket & modular type switch (brand approved by eic) incl. s&f earth continuity wire, fixed on 4 module gl switch board with 3/4 module top cover plate flushed in wall incl. mending good damages to original finish. pwd sch page e-20 item no 3(i), on, , concealed cutting channel, , cutting channel of 31 mm x 31 mm size on masonry wall incl. s&f heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 swg gi wire fish wire incl. mending good damages to building works. pwd sch page e-2 item no 2a. 13 mm dia 3 mm thick polythene pipe without earth, , cutting channel of 31 mm x 31 mm size on masonry wall incl. s&f heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 swg gi wire fish wire incl. mending good damages to building works. pwd sch page e-2 item no 2a. 13 mm dia 3 mm thick polythene pipe without earth, , distribution wiring, , 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (5 sqmm) as ecc, pwd sch page e-9 item no 1. make: kei/mescab/finolex, , 2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ecc, pwd sch page e-9, , 2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sgmm) as ecce) 4x126/0.4 (16 sqmm)+2x80/0.4 (10 sgmm) as ecc, pwd sch page e-9, , 4x80/0.4 (10sqmm) + 2x84/0.3 (6 sqmm) as ecc, pwd sch page e-9, , air conditioner, , supply & fixing 240 v, 25a modula

Central Government/Public Sector

CTN :45205290

26 May, 2026 NA

Dhanbad - Jharkhand

Tender For auction sale of others - disposal of miscellaneous scrap released materials such as:- (1) element zink, qty=3025 kg. (2) poly carbonate lens (white) 213 x 102 mm fl, lens (yellow) 136 mm, lens (red) 140 mm, 13mm fl, lens (green)140 mm, 13mm fl, lens 101 mm green for route, lens 101 mm white, lens white, 127 x 70 mm fl, lens white 213 mm, 102 fl, lens green 92 mm, 16 fl, glass jar for ad cell, styron acrylamide nitrite (san) jar with poly polypropylene lid for awe- z type cell, bulb lamp elect. 12v/25w (3 pin), bulb 12v/33w, qty=1898 kg. (3) tag block, tape steel, tape metallic, tape measuring steel, p g clamp, current regulator, 8 way barrier terminal, digital insulation tester, solar panel, 4w/2w combined potable control telephone, indicator disc type 1000 ohm, c spike, a binding wire, 2 wire cnl telephone, digital multi meter (defective), digital tough tester, 10 swg wire, spray gun (broken), earth tester, power meter with sensor, qty=40 kg. (4) set square paratone 60-45, set square paratone 45-4, pvc flexible pipe 20 mm, fiber optical cable assembly, pvc cable channel 15 mm (plastic), qty=10 kg. (5) double ply tent soldries size 12 x 12, soldries single fly tent 12x12x2"x2", banner flag red, flag hand signal red, flag hand green, qty=221 kg. (6) transformer u type, transformer of sorts, signal transformer 110/12v, 40va, transformer 110/110v, 150 va, transformer 300v/12v, 40va, transformer 110/300 v, 60va, transformer 300 v/100v, 150 va, transformer 110v/300v, 150 va, qty=1371 kg. (7) voltage regulator 5 kva (broken & damaged), qty=01 no. (8) voltage regulator 3 kva (broken & damage), qty=01 no. (9) battery charger of shorts, qty=08 nos. (10) 3 pole lamp holder w/o base, lamp harrican, 3 pole lamp holder with base, lamp petromax baby, 3 pole lamp 12v/24w, hand signal lamp, qty=2604 nos. (11) ct box 100 pair, qty=01 no. (12) relay ac 4f/b, (self type), relay non ac, 4f/b, 2f/b(self type), qty=125 nos. (13) relay ecr lamp proving (on aspect) qecx-51, qty=40 nos. (14) relay ecr lamp proving (off aspect) qecx-52, qty=118 nos. (15) relay plug in type dc-track qt2, qty=108 nos. (16) relay plug in type qt1, qty=19 nos. (17) over load relay with time delay of 69 sec (timer 1010), qty=85 nos. (18) relay p1-150 & 150a, (4f/2b, 4f/1b), 24v dc, qty=532 nos. (19) relay of sorts timer relay, relay qucx-1, relay qsra1(8f/8b), esra-1 (8f/4b), relay qfpr1, qty=733 nos. (20) dc track relay rtd 02-0.5v (hm) 2f/b, qty=78 nos. (21) relay thermal time element (2f/1b), qty=47 nos. (22) relay point contractor nr/or (gn), qty=240 nos. (23) plug board nr/or, hv relay, qty=165 nos. (24) relay p-p1 style 2f/1b)(24 pin per relay), qty=24 nos. location:- dhanbad store (gd-i & ii) & re store under sse/sig/w/dhn.

Central Government And Public Sector

CTN :45208209

05 Jun, 2026 8.00 Lacs

West Champaran - Bihar

Tender For standing order/rate contract for supply of abb make electrical materials on door delivery and callup basis at hbl plant sugauli, east champaran and lauriya, west champaran, bihar - power contactor a09-30-10, coil voltage 110v ac, make - abb, add on for a09-30-10, ca5-10, part no : 1sbn010010r1010, make - abb, power contactor a09-30-10, coil voltage 220vac, make - abb, power contactor a30-30-10, coil voltage 220vac, make - abb, power contactor af09-30-10-12, coil voltage 48-130vdc, make - abb, power contactor a09-30-10, coil voltage 415vac, make - abb, power contactor a12-30-10, coil voltage 110vac, make - abb, power contactor a16-30-10, coil voltage 230vac, make - abb, power contactor a26-30-10, coil voltage 110vac, make - abb, power contactor a26-30-10, coil voltage 230vac, make - abb, power contactor a50-30-10, coil voltage 110vac, make - abb, power contactor a95-30-11, coil voltage 110vac, make - abb, auxillary contactor nf40e, coil voltage 110vac, make - abb, auxillary contact cal18-11, coil voltage 230vac, make - abb, auxillary contactor n40e, coil voltage 220vac, make - abb, add on block, ca5-01, 1nc type, part no : 1sbn010010r1010, make - abb, add on block, ca5-22 e, 2no+2nc type, part no : 1sbn010040r1022, make - abb, add on block, ca5-10, 1no type, part no : 1sbn010010r1010, make - abb, power contactor nl40e , coil voltage 24vdc, make - abb, auxillary contactor n22e, coil voltage 220vac, make - abb, auxillary contactor n40e, coil voltage 220 ... 230vac, make - abb, thermal overload relay, ta25du 2.4m, range- 1.7-2.4a, part no :1saz211201r2028, make - abb, thermal overload relay, ta25du 4.0m, range- 2.8 -4.0a, part no :1saz211201r2033, make - abb, thermal overload relay, ta25du 6.5m, range- 4.5- 6.5a, part no :1saz211201r2038, make - abb, thermal overload relay, ta25du 11m, range- 7.5- 11.0a, part no :1saz211201r2043, make - abb, thermal overload relay, ta25du 8.5m, range- 6.0-8.5a, part no :1saz211201r2040, make - abb, electronic overload relay, e45du 30, range- 9- 30a, part no : 1sax211001r1101, make - abb, thermal overload relay, ta25du 19m, range- 13.0-19.0a,part no :1saz211201r2047, make - abb, thermal overload relay, ta25du 19m, range- 13.0-19.0a,part no : 1saz211201r2053, make - abb, thermal overload relay, ta75du 42, range- 29 - 42a, part no : 1saz321201r2003, make - abb, thermal overload relay, ta80du-52m, range- 36- 52a, part no : 1saz331201r2004, make - abb, thermal overload relay, ta75du 63, range- 45-63a, part no : 1saz321201r2005, make - abb, electronic overload relay,e16du 6.3, range- 1.9 -6.3a,part no : 1sax111001r1104, make - abb, off-delay timer, ct-ahc.22,(0.05 s-100 h) with 2c/o part no : 3adc340091r0001, make - abb, mpcb ms116-0.63, range- 0.40 0.63, part no : 1sam250000r1004, make - abb, mpcb ms116-1.6, range- 1.00 - 1.60, part no : 1sam250000r1006, make - abb, mpcb ms116-1.6, range- ms116-2.5, part no : 1sam250000r1007, make - abb, electronic overload relay,e16du 18.9, range- 5.7- 18.9a, part no :1sax111001r1105, make - abb, thermal overload relay, ta75du 63, range- 45 ... 63, part no : 1saz321201r2005, make - abb, sfu 200a, 3p+n, os250d03n3p, part no : 1syn022749r9430, make - abb, sfu 250a, 3p+n, os250d03n3p, part no : 1syn022749r9430, make - abb, sfu 160a, 3p+n, oesa00160n, part no : 1syn022753r9320, make - abb, sfu 125a, 3p, oesa 00125, part no : 1syn790290p0500, make - abb, sfu 63a, 3p, oesa 00-63, part no : 1syn790290p0497, make - abb, sfu 32a, 3p, oesa00-32, part no : 1syn790290p0493, make - abb, hrc fuse, ofafn000gg6, 6a, gg, 500 v, 80 ka,part no : 1sca107748r1001, make - abb, hrc fuse, ofafn000gg6, 6a, gg, 500 v, 80 ka, make - abb, hrc fuse, ofafn000gg10, 10a, gg, 500 v, 80 ka, make - abb, hrc fuse, ofafn000gg16, 16a, gg, 500 v, 80 ka, make - abb, hrc fuse, ofafn000gg20, 20a, gg, 500 v, 80 ka, make - abb, hrc fuse, ofafn000gg25, 25a, gg, 500 v, 80 ka, make - abb, hrc fuse, ofafn000gg32, 32a, gg, 500 v, 80 ka, make - abb, hrc fuse, ofafn00gg50, 50a, gg, 500 v, 80 ka, make - abb, hrc fuse,

Central Government/Public Sector

CTN :45280243

11 Jun, 2026 NA

Bhojpur - Bihar

Tender For supply of high end thermovision scanning camera

State Government

CTN :44830844

29 May, 2026 1.64 Crore

Gandhinagar - Gujarat

Tender For corrigendum : invitation to bidfor two years rate contract for removal, supply and application of thermal insulation materials at gsegs ccpp at hazira, surat

Central Government And Public Sector

CTN :45267072

12 Jun, 2026 NA

Bangalore - Karnataka

Tender For helical inline gear motor to the model no. sk973.1-112mp/4 tf of make m/s nord or substantially equivalent with following features: input speed(rpm): 1440; output speed(rpm): 15; gear ratio: 94.96; power (kw): 4; service factor: 1.3; output torque: 2519 nm; overhung load: 23.6 kn; axial load: 22 kn; motor inverter speed range: standard line powered inverter capable; voltage: 400/690 v; frequency: 50 hz; efficiency class: ie3; current 1: 7.85 a; current 2: 4.53 a; cosinus: 0.83; motor duty: s1 - continuous; enclosure: ip55; insulation class: f; mounting pos - m1; housing material: cast iron housing; type of housing: foot mount; output shaft: solid keyed shaft; output shaft (dia x length): 60x120 mm; output shaft material: standard; gearbox breather options: auto vent; gearbox sealing options: fkm seals; bearing design: standard bearings; motor cooling: tefc - totally enclosed fan cooled; motor thermal protection: thermistor; motor option: fluoro rubber motor seals. note: - i. material of construction: fabricated steel housing (stress relieved) ii. all gears shall be manufactured from steel forgings or rolled bar made from steel 17cr ni mo6/18cr ni mo6 (case hardening steel). iii. all gears shall be case hardened to 58-62 hrc and profile ground. iv. output shaft shall be of en 9 material normalized to 201 bhn (min) v. bearing used shall be rollingelement type of make skf/ntn/timken/fag only. special conditions: a) only authorised license manufacturers of gear boxes or their authorised dealers shall participate in the tender and must furnish an authorizedlicense or dealer certificate at the time of technical scrutiny. b) mtc and heat treatment shall be submitted along with the supply. c)warranty: the material shall have a warranty of 12 months from the date of installation or 18 months from the date of supply, whichever is earlier d)above specified materials are the minimum required standard to be considered while desiging the gear motor. [ warranty period: 18 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45160134

19 May, 2026 NA

Dhanbad - Jharkhand

Tender For auction sale of others - disposal of miscellaneous scrap released materials such as:- (1) element zink, qty=3025 kg. (2) poly carbonate lens (white) 213 x 102 mm fl, lens (yellow) 136 mm, lens (red) 140 mm, 13mm fl, lens (green)140 mm, 13mm fl, lens 101 mm green for route, lens 101 mm white, lens white, 127 x 70 mm fl, lens white 213 mm, 102 fl, lens green 92 mm, 16 fl, glass jar for ad cell, styron acrylamide nitrite (san) jar with poly polypropylene lid for awe- z type cell, bulb lamp elect. 12v/25w (3 pin), bulb 12v/33w, qty=1898 kg. (3) tag block, tape steel, tape metallic, tape measuring steel, p g clamp, current regulator, 8 way barrier terminal, digital insulation tester, solar panel, 4w/2w combined potable control telephone, indicator disc type 1000 ohm, c spike, a binding wire, 2 wire cnl telephone, digital multi meter (defective), digital tough tester, 10 swg wire, spray gun (broken), earth tester, power meter with sensor, qty=40 kg. (4) set square paratone 60-45, set square paratone 45-4, pvc flexible pipe 20 mm, fiber optical cable assembly, pvc cable channel 15 mm (plastic), qty=10 kg. (5) double ply tent soldries size 12 x 12, soldries single fly tent 12x12x2"x2", banner flag red, flag hand signal red, flag hand green, qty=221 kg. (6) transformer u type, transformer of sorts, signal transformer 110/12v, 40va, transformer 110/110v, 150 va, transformer 300v/12v, 40va, transformer 110/300 v, 60va, transformer 300 v/100v, 150 va, transformer 110v/300v, 150 va, qty=1371 kg. (7) voltage regulator 5 kva (broken & damaged), qty=01 no. (8) voltage regulator 3 kva (broken & damage), qty=01 no. (9) battery charger of shorts, qty=08 nos. (10) 3 pole lamp holder w/o base, lamp harrican, 3 pole lamp holder with base, lamp petromax baby, 3 pole lamp 12v/24w, hand signal lamp, qty=2604 nos. (11) ct box 100 pair, qty=01 no. (12) relay ac 4f/b, (self type), relay non ac, 4f/b, 2f/b(self type), qty=125 nos. (13) relay ecr lamp proving (on aspect) qecx-51, qty=40 nos. (14) relay ecr lamp proving (off aspect) qecx-52, qty=118 nos. (15) relay plug in type dc-track qt2, qty=108 nos. (16) relay plug in type qt1, qty=19 nos. (17) over load relay with time delay of 69 sec (timer 1010), qty=85 nos. (18) relay p1-150 & 150a, (4f/2b, 4f/1b), 24v dc, qty=532 nos. (19) relay of sorts timer relay, relay qucx-1, relay qsra1(8f/8b), esra-1 (8f/4b), relay qfpr1, qty=733 nos. (20) dc track relay rtd 02-0.5v (hm) 2f/b, qty=78 nos. (21) relay thermal time element (2f/1b), qty=47 nos. (22) relay point contractor nr/or (gn), qty=240 nos. (23) plug board nr/or, hv relay, qty=165 nos. (24) relay p-p1 style 2f/1b)(24 pin per relay), qty=24 nos. location:- dhanbad store (gd-i & ii) & re store under sse/sig/w/dhn.

Thermovision Scanning Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors