Latest thimble Tenders | Government thimble Tenders

Central Government And Public Sector

CTN :40568155

23 Jun, 2025 NA

Angul - Odisha

Tender For supply of hydraulic cylinder for thimble press jaw in rodding shop-1_ 1000070954

Central Government/Public Sector

CTN :40330612

11 Jun, 2025 37.97 Lacs

Faizabad - Uttar Pradesh

Tender For corrigendum : tender for supply of supply of bakelite sheet with 1nos of 6a dp mcb and stud type connector suitable for 4cx 6sq mm cable complete as required. , supply of 25w led street light luminiare with pre die cast aluminium housing and ip 66 protection , pf greater than equal to 0.95 , thd less than 10 percent , cri greater than equal to 70 as per technical specification complete as required. , supply of lt power cable of 1.1 kv grade of following sizes aluminium conductor xlpe insulated pvc sheathed armoured cable confirming to is 7098 part-i-1988 with upto date ammendment as required. a) 3.5 c x 95 sq. mm , supply of lt power cable of 1.1 kv grade of following sizes 4c x 6sq.mm(copper conductor) , supplying and laying of following size dwc hdpe pipe isi marked along with all accessories like socket , bend , couplers etc. conforming to is 14930 , part ii complete with fitting and cutting , jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. , complete as required. a) 63 mm dia (od-63 mm & id-50 mm nominal) , laying of one number pvc insulated and pvc sheathed/xlpe power cable of 1.1kv grade of following size in the existing rcc/gi/hume/metal/hdpe pipe etc. as required. a) above 35sq.mm and up to 95 sq mm , laying of one number pvc insulated and pvc sheathed/xlpe power cable of 1.1kv grade of following size in the existing rcc/gi/hume/metal/hdpe pipe etc. as required. b) up to 35 sq mm , supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required. a) 3.5c x 95 sq.mm , supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required. b) 4c x 6sq.mm(copper conductor) , itc of gi octagonal pole of following length in reinforced cement concrete 1 ratio 2 ratio 4 (1 cement 2 coarse sand 4 stone aggregate 40mm nominal size) foundation i/c excavation and refilling etc. complete as required a) 5 mtr. height , itc of 30w led street light luminiare on existing pole bracket i/c connection with 1.5sq.mm frls copper wire complete as required. , earthing with g.i. earth plate 600 mm x 600 mm x 6 mm thick including accessories , and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. , providing and fixing 25 mm x 5 mm g.i. strip in 40 mm dia g.i. pipe from earth electrode including connection with g.i. nut , bolt , spring , washer excavation and re-filling etc. as required. , earthing with g.i. earth pipe 4.5 metre long , 40 mm dia including accessories , and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. , providing and laying earth connections , from earth electrode with 6 swg dia , g.i wire in 15mm dia , g.i pipe from earth electrode including connection with g.i. thimble excavation and re-filling as required. , providing and fixing 6 swg g.i. wire on surface or in recess for loop earthing alongwith the existing cable as required. , design , fabrication , supply , installation , testing & commissioning of outdoor feeder pillar , cubicle type , made out of 2 mm thick crca sheet , totally enclosed , ip 55 , free standing , floor mounting , dust and vermin proof , indoor , compartmentalised , suitable for operation on 3 phase and neutral , 415 v , 50 hz ac system , including internal wiring with suitable size wires/cable , interconnection , duly powder coated painting etc. , including supply & installation of following switchgears , metering instruments and accessories in the feeder pillar as required as per attached boq in atc , shifting of 5 mtr height str

CTN :40581283

24 Jun, 2025 NA

Patiala - Punjab

Tender For supply of 50 574 hex screw m6x20 , rfso 110820 hex screw m8x20 , 50 263 seven pin plug , 5970 001033 insulation tape elecl pvc , nk002777 t band , 50 223 36 elbow to suit od 16 pipe , nk003043 fuse box screw , 50 669 3 cable , 50 55 16 junction box , 50 58 16 thimble , nk000711 loom tape , nk002151 led light , 6220 000052 1 light unit tail light , 4720 000332 flexible metalic hose , 50 223 17 pvc conduit pipe 15 mtrs 25 od , 4720 000417 hose metal , 4730 000901 sleeve pipe hose , 50 223 3 cable 140mm single cover

Central Government/Public Sector

CTN :40578319

23 Jun, 2025 9.99 Lacs

Ganjam - Odisha

Tender For annual rate contract for spares of air conditioners - capacitor running 2.5 mfd (ac), capacitor running 3.0 mfd (ac), capacitor running 4.0 mfd (ac), capacitor running 6.0 mfd (ac), capacitor running 45 mfd (ac), capacitor running 50 mfd (ac), capacitor running 55+4 mfd (ac), capacitor running 60 mfd (ac), capacitor running 60+4 mfd (ac), brass flare nut 1/2 (ac), brass flare nut 1/4 (ac), brass flare nut 3/8 (ac), brass flare nut 5/8 (ac), copper pipe 1/2 (ac), copper pipe 1/4 (ac), copper pipe 3/8 (ac), copper pipe 5/8 (ac), nitrile rubber insulation 1/2 (ac), nitrile rubber insulation 1/4 (ac), nitrile rubber insulation 3/8 (ac), nitrile rubber insulation 5/8 (ac), brass liquid line valve 1/2 (ac), brass liquid line valve 1/4 (ac), brass liquid line valve 3/8 (ac), brass liquid line valve 5/8 (ac), welding stick (ac), wrapping tape (ac), copper coil condensing for 1.5 ton split (non inveter ac), copper coil condensing for 2.0 ton split (non inveter ac), copper coil condensing for 1.5 ton (split inverter ac), copper coil condensing for 2.0 ton (split inveter ac), compressor for 1.5 ton (split ac) - r22 gas, compressor for 2.0 ton (split ac) - r22 gas, compressor for 1.5 ton (split ac) - r32 gas, compressor for 2.0 ton (split ac) - r32 gas, compressor for 1.5 ton (split ac) - r410 gas, compressor for 2.0 ton (split ac) - r410 gas, compressor for 1.5 ton (split inveter ac) - r32 gas, compressor for 2.0 ton (split inveter ac) - r32 gas, compressor for 1.5 ton (split inveter ac)- r410 gas, compressor for 2.0 ton (split inveter ac) - r410 gas, outdoor dc motor for inverter ac, universal/suitable pcb for 1.5/2.0 ton (split ac), universal/suitable pcb for 1.5/2.0 ton (inverter split ac), refrigerant gas r-22 (ac), refrigerant gas r-32 (ac), refrigerant gas r-410 (ac), lpg gas welding can (ac), condenser coil cleaner (ac), fan blade odu 1.5 ton (split ac), fan blade odu 2.0 ton (split ac), indoor unit blower assembly 1.5 ton (split ac), indoor unit blower assembly 2.0 ton (split ac), indoor unit motor 1.5 ton (split ac), indoor unit motor 2.0 ton (split ac), outdoor unit motor 1.5 ton (split ac), outdoor unit motor 2.0 ton (split ac), indoor unit swing motor (ac), outdoor unit electrical contactor (ac), compressor thimble (ac)

CTN :40533716

03 Jun, 2025 4.28 Lacs

Jhajjar - Haryana

Tender For requirement of electric components for flood season 2025-26 in w.s mechanical division, jhajjar. - air fan cover for 15 hp motor square type, air fan for 15 hp motor (as per sample), air fan for 30 hp horizontal motor, air fan for 30 hp vt motor (bch), air fan for 50 hp vt motor (bch), ampere meter (as per sample), bolt for motor cover, clamp meter fluke/generic 302+400a range, connection plate for 15hp parmil (as per sample) bch motar, contractor for 15hp pannel bch make ac1= 32a nhd na=25amp ac2=32a ui=66v,415v coil=380-415v 50hz, ct for 15hp pannel procom make type- rcctwpl 50/5 amp. freq 50hz sr. no.-54201503299 hsv/il- 0.66/3kv cl-1.0 ie c/s-60044/1/2705-1, electronic star delta timer psg 40v 0 sec. 25, fix finger set 20-40 hp, generic 25mmx10m polyester natcthet lashing belt double j hook 0.8 to 1000kg (1 ton) laod capacity orange, kit kat 100 amp is certified heavy duty, line tester, load coil (bch make) bocr bocrcs -60s control voltage=24-240va cldc torque =17nm, main switch 100 amp bentex/advance/psg, main switch 200 amp bentex/advance/psg, mccb 100a (bch make) reliant ( as per sample), mccb 32a double pole (bch make) 50hz for 15hp pannel( as per sample), moving finger tip for 20-40 hp, no volt coil upto 100hp isi certified heavy duty, pvc copper wire 10 sq. mm 3 core, rubber hand gloves vidyut/jyoti 11kv, single mcb (bch make) c6 with mounting pad (as per sample), single phase preventor for 15hp pannel gkrc=03 (bch make), tarpine oil, thermal overload relay mn5 66-110a, thimble 126 sq.mm, thimble 185 sq. mm, thimble 300 sq. mm, thimble 50 sq. mm, thimble 90 sq. mm, timer for 15hp pannel bch make 260-420 vac, 2200va, 250v-10a(as per sample), torch rechargable philips/everady/wipro 3w

Central Government/Public Sector

CTN :40538949

12 Jun, 2025 NA

Pune - Maharashtra

Tender For manufacture and supply of welding portions for fusion welding of 60kg/60e1 (r-260 grade) rails by alumino thermic process with nominal gap of 25 mm using cap/ oxy lpg/ oxy propane preheati ng with 3 piece mould (zr-washed) manually pressed /core shooted with auto tapping thimble & single shot crucible.applicable rdso specification is irs t-19-2021 rev.7.0,applicable schedule of technical re quirement (str) is tdg0017, ver 4.0,list of required consumables as per annexure - a) (the alteration in drawing, schedule of technical requirement (str) and specifications issued by rdso up to one month p rior to tender opening date shall be applicable to this tender).. [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :40537770

24 Jun, 2025 NA

Raipur - Chhattisgarh

Tender For supply of welding portion and welding of rail joints by alumino thermic skv process (single shot crucible with automatic tapping thimble technology) including supervision, tools & plants and consumables etc. under the jurisdiction of sr.den/i/r of raipur division.

CTN :40344858

09 Jun, 2025 5.00 Lacs

Kanpur - Uttar Pradesh

Tender For corrigendum : supply of laboratory non glassware item - tongs , spatula , test tube stand , burette stand , clamps , boss head , rubber adaptor for filtering flask , vaccum pet , pipette controller , rubber tubes for water circulation , silicon tubes for water circulation , filter paper no.-1 , filter paper no.-4 , filter paper no.-42 , thimble for extraction , pre-coated tlc aluminum plates , china dish or porcelain dish , pestle and mortar , digital thermo-hygrometer , centrifuge tube 50ml polypropylene , syringe filter point 45 micro metre pore size , syringe with needle 5ml capacity , laboratory mask , glass droppers with rubber teat , head cover hair net

CTN :40328971

02 Jun, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : one year annual rate contract for procurement of consumables, miscellaneous materials for qa lab. millipore membranes plain white circles, 2ml clear screw top glass vial, 2ml clear crimp top glass vial, 9mm blue open top pp cap with slit, crimp vial caps varian simdis, glass sample vials 20ml capacity, high temperature flexi plastic caps, suraksha rubber hose pipe 1.2mtr lpg gas, green rubber hose (8mm:id), membrane filters (mce) 100discs/pack, millipore membrane white or brown gridde, silicon tube id 4mm/od 7mm , silicon tube id 8mm/od 12mm , 5 micro lit straight syringe gc , whatman (40 grade) filter papers 100/pac, membrane, thimble extraction 20-30um 25mm 70mm, purple nitrile extra gloves,medium , purple nitrile extra gloves, large, plastic inserts for metallic sample cups, distillation flask 125ml, glass sample bottles,100ml with cap, white pe liners for black caps, two way gas sampling bladder.

Central Government/Public Sector

CTN :39985952

05 Jun, 2025 NA

Jhunjhunu - Rajasthan

Tender For corrigendum : supply of thimble type friction wedge winding rope skip attachment lh as per drawing no. m-204. , thimble type friction wedge winding rope skip attachment rh as per drawing no. m-206.

Thimble Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector