Latest thin film measurement machine Tenders | Government thin film measurement machine Tenders

State Government

CTN :45249557

29 May, 2026 50.00 Lacs

Balotara - Rajasthan

Tender For annual rate contract for providing new water service connection with material under division balotra - providing household tap connection as per technical specification and approved drawing as per relevant is code (amended up to date) from hdpe/upvc/di/ac/ms/gi pipe line up to consumer meter/premises by using pp mechanical integrated saddle with inbuilt flow control valve made out of ss316 designed for 5 lpm discharge at 0.5 bar pressure , not exceeding the flow of 7 lpm at 2 bar and a compression elbow, moulded in single piece/ fusion welded (complete job) including digging out suitable size of pits and trench for laying service line in all kinds of soil; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including gm full-way valve (is:778 mark) or wheel valve and specials with 20 mm nominal dia mdpe pipe pe 80 pn 16 as per iso 4427 / 20 mm nominal dia ppr-c (three layered) pipe pn16 sdr 7.4 (is:15801:2008) (isi mark) and above ground level using ppr-c pipe with standard ppr fittings/ gi pipes in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . the service line should be laid at least 45 cm below ground level. note: road cut and restoration is not part of this item and paid separately. for connection with 20 mm dia mdpe/ppr-c pipe length up to 05 mtr. rate is exclusive of gst., road cutting for house hold service connection in minimum trench width wherever road crossing is required. road cutting of cement concrete,wbm, black top etc. of all thickness shall be done by using a concrete cutter machine keeping minimum trench width and restoration of the road with cement concrete with pcc m-10 and cc m-30 grade as per specification and direction of engineer in charge.(06 meter) rate is exclusive of gst., add extra over item no 1.21, 1.22 & 1.23 for providing 20 mm pe 80 pn 16 as per iso 4427 mdpe pipe including excavation, providing, laying & jointing of service line above 5.00 mtr. rate is exclusive of gst., road cutting charges for pit of size 1.0x1.0 mtr for providing connection dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by cc cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. (0.30 cum) rate is exclusive of gst., road restoration charges for pit of size 1.0x1.0 mtr for providing connection providing and laying in position cement concrete m10 grade nominal mix 1:3:6 (1 cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work. (0.10 cum) rate is exclusive of gst., providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement

CTN :45255587

18 Jun, 2026 NA

Lucknow - Uttar Pradesh

Tender For supply of cordless & powerstate brushless 1/2" digital torque wrench ( battery operated) providing 16.9 -203.4nm of torque range and accuracy within +/-2% & ccw+/-3% with following specifications. bluetooth enabled tool with the mobile app helps in tool tracking, geo fencing, remote tool lock out in case of theft, digital inventory. four measurement modes (ft-lb, in-lb, nm, kg-cm) and 15 available presets. adjustablerun-down torque to control the tools output torque via the motor to prevent over torque. durable design to withstand the most demanding job site environments. four notification modes that the tool is reaching, meeting or exceeding the torque target (audible, led,lcd, and vibratory). accessories: 12 v, 2 ah battery- 2 nos. with suitable charger - 1 no. make: milwakee (or) in festool (or) hinti (or) chicago pneumatics or similar. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45194520

05 Jun, 2026 NA

Jaipur - Rajasthan

Tender For supply of digital cordless & power state brushless 1/2 digital torque wrench ( battery operated) providing 17- 203 nm of torque range and accuracy within +/-2% & ccw+/-3% with following specifications. bluetooth enabled tool with the mobile app helps in tool tracking, geo fencing, remote tool lock out in case of theft, digital inventory. four measurement modes (ft-lb, in-lb, nm, kg-cm) and 15 available presets. adjustable run-down torque to control the tools output torque via the motor to prevent over torque. durable design to withstand the most demanding jobsite environments. four notification modes that the tool is reaching, meeting or exceeding the torque target (audible, led,lcd, and vibratory). accessories: 12 v, 2 ah battery- 2 nos. with suitable charger - 1 no.as per attached annexure - a . [ warranty period: 30 months after the date of delivery ] ]

CTN :45224610

01 Jun, 2026 NA

Bangalore - Karnataka

Tender For tender for supply of power quality measurement system , design and submission of design documents , fai reports and type test reports , deliverables as per erts , printed circuit boards , microprocessor details , spares and consumables for cmc period , tools required for cmc period , training , training manual andsystem

State Government

CTN :44771229

28 May, 2026 NA

Manuguru - Telangana

Tender For corrigendum : supply of printing stationery items for use in various circles of btps - 220kv ict, bus and line sf6 gas oressyre oaraneters, 3.5 meter switch gear room parameters, unit-i, 3.5 meter switch gear room parameters, unit-ii, 3.5 meter switch gear room parameters, unit-iii, 3.5 meter switch gear room parameters, unit-iv, ac plant parameters, agreement register,200 pages, anion exchanger book,200 pages, battery charges @ ahp, battery charges @ mcr, unit-i battery charges, unit-ii battery charges, battery charges unit-iii, battery charges unit-iv, battery log book, chemical bills register 200 pages, "bin cards , 210x170mm with suitablecover w/tsgenco logo", boiler feed & steem analysis book,200pages, chemical analysis, chemical bunker coal analysis register, 200 pages, bus and line parameters, casual leave form book,100pages,size:1x8, cation exchanger book,200pages, chemical raw water analysis register 200, pages, register,cloth bounded,100pages, cloth register bounded 200 pages, register,cloth bound,300pages, cmd parameters, chemical combustibles in ash analysis, register 200 pages, chemical compliant register 200 pages, chemical consumable register 200 pages, chemical consumption register 200 pages, register,cooling tower water analysis,200, pages, cw pump house parameters, register daily bulk chemical, consumption 200 pages, register,ruled,100pages, register 200 pages deluxe, register 300 pages deluxe, book,devolution(1+2),50pages, chemical d.m.plant water analysis, register 200 pages, chemical d.m.effluent analysis register, 200 pages, duty mounting & dismounting register with duplicate, emergency works approval register, equipment history register, 11 esp control room parameters, book,fcr,100pages, estimate register, fd fans local parameters, file backer, chemical flue gas analysis 200 pages, foph parameters, fote counter @ mcr, generation transformer (gt)-ii, parameters, generation transformer (gt)-i parameters, generation particulars, gt# 3 parameters, gt# 4 parameters, gt,st & uat's parameters, id fans local parameters, chemical indent register 200 pages, inward register, 200 pages, register,inward material,500pages, book,mb exchanger,200 pages, material movement register, measurement book, measurement books (200 pages 80 gsm, ledger paper/size - 7" x 8 1/2" with, straw board on top logo with tsgenco, printing), mills local parameters, logbook,motor lorry,300pages, dispatch-out ward registers - 300 page, pa fans local parameters, petty cash book, register,pulverise coal analysis,200pages, book,pump&motor parameters,3x31pages, register,purchase,100pages, register,raw water & clarified water, analysis,200 pages, register,material returnable,300pages, register,ruled,200pages, stores issued book, stores received book, sentry relief book,a4, sf6 gas pressure parameters, book,shift log,300pages, logbook, soot blowers ,each book of 100, page (1 page /set, 100 sets), single side, thick, bound, legal size, spares register, station transformer - ii, station transformer (st)& bus reactor, pparameters, register,t&p,200pages, register tappal delivery,200pages, register,tender notice,200 pages, register,tender opening,200 pages, register,tender schedule sold,200 pages, tender specification booklet contract, containing 10 pages, printed on both sides, of pages (a4 size), chemicl register of tools and equipment, 200 pages, book, transformer yard parameters,, 3x31pages, transport notebook in quatriplicate, usr books with bound with triplicate, receipts (50 pages), unitit perameters (fw), unitit perameters (sg), unitit perameters (tg), register,vehicle movement,200pages, book,trip sheet,triplicate, work allocation register, fcr book,200 pages, boiler local parameters

CTN :44653041

19 May, 2026 NA

Kolkata - West Bengal

Tender For corrigendum : supply of combined motion sensor inertial measurement unit hrp gyro dgps for grse ars project : : - mru_combined motion sensor imu,hrp and gyro , dgps navigation sensor , software including lifetime licence , converter module , installation material and accessories , system cables , special tools and test equipment , document hardcopy , document softcopy , service of engineer , training

Central Government/Public Sector

CTN :45181398

03 Jun, 2026 NA

Warangal-T - Telangana

Tender For supply of package no. 1 - atal tinkering lab of niti aayog electronics development, robotics, internet of things and sensors (q3) , package no. 2 atal tinkering lab of niti aayog rapid prototyping tools (q3) , package no. 3 atal tinkering lab of niti aayog mechanical, electrical and measurement tools (q3) , package no 4 - atal tinkering lab of niti aayog power supply and accessories and safety equipment (q3)

CTN :45154800

01 Jun, 2026 NA

Chandigarh - Chandigarh

Tender For supply of air comp d cyl 200 ltrs tank 3hp 3ph motor with nrv a cut air inflator comp set , ark welding set 200 amp with 20 mtr cable and holder complete , air gun with spring type pipe , air impect gun heavy duty , alien key 03 mm 10 mm , bench vice heavy duty , battery charger c 12 72 , battery load tester , boost cable , centre punch 6 inch , circlip plier inner heavy duty , circlip plier outer heavy duty , cold flat chisel 6 , combination plier , complete mechanic tool box steel three fold with tools , copper welding cable , crash helmat , dah with handle , de spanner set 06 pic 8x9 to 18x19 , de spanner set 12 pic 8x9 to 30x22 , diesel spray gun , digital multimeter , drill bit set , electronic welding screen , eletrode holder , envil 100 kg , file flat bustard with handle 12 , fire extinguisher half kg , first aid box , foot pump electric , gear box trolly jack , goggles for motor cycle , grease gun bucket 20 kg air operated pneumatic , hammer ball pen 2 lbs with handle , hand drill machine , hand gloves leather , hand grinder , hexa frame , hub puller heavy vehicle , hydraulic jack 5 ton , hydrolic trolly jack 03 ton , hydrolic trolly jack 10 ton , hydrometer , hydrualic press hand oprated small , impact screw driver , inspection lamp with 5 mtrs wire and clip , iron trey 24 inch x 18 inch x 3inch with handle , iron trey 36 inch x 24 inch x 3 inch with handle , mechanic trolly creeper , oil cane 250ml , oil filter openner multy purpose , pad lock with key , paint spray gun , pick axe 4 5 lbs , pipe wrench 16 inch , plier adjustable , plug spanner mpfi , piston ring compressor , screw driver 10 inch , screw driver 6 inch , screw driver philips 6 inch , shawel , socket spanner 6mm to 14mm with complete ) /bid number : gem/2026/b/7526987 * /dated: 11-05-2026 & & / bid document 1 / 104 shawel , socket spanner 6mm to 14mm with complete attechment , socket spanner hexagonal 8mm to 32mm , soldring iron 125w heavy duty , soldring paste 50 grm pack , soldring wire 08 mm 50gm pack , spanner adjustable 8 , tool box steel two fold , torque wrench 250 lbs , torque wrench 3 mkg to 7 mkg , tubeless tyre puncture kit , tyre pressure gauge , tyre inflating hose , tyre lever heavy duty taparia , vaccum cleaner big size nt 70 2 , valve die , water thermameter digital , welding hand safety gloves leather , alien key 17mm , adjustable wrench 300 mm , cold flat chisel 19 mm , cold flat chisel 17mm , file square with handle 6 , file flat bustard with handle 6 , file flat round smooth handle 6 , file flat bustard with handle 10 , fire extinguisher 2 kg , fuel funnel small , fuel funnel big , filler gauge , grinder stone 4 , hand grinder elerical , measurement 200 ml , measurement 250 ml , measurement 500 ml , measurement 1 ltr , measurement 2 ltr , measurement 5 ltr , nose plier 6 , pipe wrench 10 inch , piston ring compressor big , piston ring compressor small , piston ring expender heavy veh , piston ring expender light veh , rottery pump , ring spanner 6x7 to 30x32 , screw driver 8 inch , screw driver 4 inch , screw driver philips 8 inch , screw driver philips 4 inch , screw driver combination kit , scissor 8 , steel foot rule 12 , spark plug spanner 21 no , tong 16 inch sandasi , tool box steel three fold , trolly for carring engine assy jib crane hv vehicle , tyre inflator machine heavy vehicle with accessories , tyre inflating hose with nozzle air comp d cyl 200 ltrs tank 3hp 3ph motor with nrv a cut air inflator comp set, ark welding set 200 amp with 20 mtr cable and holder complete, air gun with spring type pipe, air impect gun heavy duty, alien key 03 mm 10 mm, bench vice heavy duty , battery charger c 12 72, battery load tester , boost cable , centre punch 6 inch, circlip plier inner heavy duty, circlip plier outer heavy duty, cold flat chisel 6, combination plier , complete mechanic tool box steel three fold with tools, copper welding cable , crash helmat, dah with handle, de spanner set 06 pic 8x9 to 18x19, de spanner set 1

Central Government And Public Sector

CTN :44760622

08 May, 2026 3.17 Lacs

Darjeeling - West Bengal

Tender For corrigendum : installation of obstacle training equipment at cisf unit tld iv ps - earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75 m. as directed. the item includes necessary trimming the sides of trenches, levelling, dressingand ramming the bottom, bailing out water as required complete.(a) depth of excavation not exceeding 1,500 mm, earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75 m. as directed. the item includes necessary trimming the sides of trenches, levelling, dressingand ramming the bottom, bailing out water as required complete (b) depth of excavation for additional depth beyond 1,500 mm. and upto 3,000 mm. but not requiring shoring., cement concrete with graded jhama khoa (30 mm size) excluding shuttering in ground floor and foundation- 1:3:6 proportion, ordinary cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground flooras per relevant is codes(b) river bazree, m.s. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle,channel sections conforming to is: 226, is: 808 & sp (6)- 1964 connected to one another with bracket,gussets, cleats as per design, direction of engineerincharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding electrodes of approved make and brand conforming to is:814- 2004, haulage, hoisting and erection all complete. the rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc.i) for structural members of specified sections weighing less than 22.5 kg./m, (a) priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc, (a) painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary (b) on steel or other metal surface :with other than higloss of approved quality-(iv) two coats (with any shade except white), filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)(b) do - by fine sand, supply and fixing of manila rope/ monkey rope., reinforcement for reinforced concrete work in all sorts of structures including distribution bars ,stirrups, binders etc. initial straightening and removal of loose rust ( if necessary), cutting to requisite length hooking and bending to correctshape, placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction.(a) for works in foundation,basement and upto roof of ground floor/upto 4m) (i)tor steel/mild steel iii. others manufacturers not specified

State Government

CTN :43964196

11 May, 2026 NA

Tapi - Gujarat

Tender For corrigendum : supply of various types of consumable items and miscellaneous items for day to day maintenance works for emd-6 utps. (emd-6 et-6203) - carbon cleaner spray, puff seal have polyurethene based foam sealing compound, stanvac pen oil rust remover 6030,500 ml/pac, 6084 red insulating varnish (500 ml) can, 901 easyclean (nf) 500 ml. spray can - on line electrical contact cleaner., 415v offline contact cleaner (700ml tin), z955 (sl) srippex sltape roll (silicon rubber, self amalgamating, high temperature resistance tape size:-25mmw0.50mmw15mtr./roll, feeler gauge: 0.05 - 1 mm, length - 150. size: 0.05 - 1mm step of 0.05mm, 20 leaves, self expanding cfc free one component polyurethane foam sealant. product2206 360 puf 3x in 700 ml spray can., w963 play safe high voltage tape (50 mm x 0.76 mm x 9.1 mtr) roll, w963 play safe high voltage tape (25 mm x 0.76 mm x 9.1 mtr) roll, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of green colour, ht pvc insulation tape size 0.18 mm x25 mm x 65 mtr length, temperature measurement laser gun., araldite 180 gram/tube, z 801 fast steel epoxy stick (1 stick 114 grm), emery cloth roll 50mm w x 50 mtr grit 220 extra fine, cable tie 100 mm, cable tie 150 mm, cable tie 200 mm, impact wrench power/battery operated, taparia make utility knife. product no. uk-3., cordless screw driver power/battery operated, tools bag (taad patri type, thick cloth) with 3 to 4 pockets for artisian tools having size 16" x 4" x 10"approximate, weighing scale digital, crc-226 contact cleaner in 415 ml/300 gram spray bottle., wd -40 industrial 420 ml wd 40 spray bottle for rust removing purpose, hss ground thread hand tap set m 10x1, nylon braided pvc hose pipe suitable air/water handling ;at working pressure of 10kg/cm2 ,size; 12mm, molykote 1000 spray can (400ml/270gms/can), electrically operated angle grinder, size: 100 mm, model no:gws 6-100 g,p no: f002 g30 050, make: bosch, digital multimeter 4.1/2 digit (true rms), loctite 242 thred locking 250 ml/tube, 2 tb external usb powered hard disk, pebble ral 7032 color spray bottle for electrical ht / lt panel, high voltage detector, rubber hand gloves, long rang rechargeable torch with charger., ag-4 cutting wheel make:bosch, buffing wheel , size: 100 x 16 x 5/6 mm, circlip plier pvc dip coated sleeve , internal (straight nose type ) ,cap 19mm to 60mm, 185mm length, product no.1441-7n, external circlip plier ( straight nose type ) cap 8 mm to 25 mm.product no:1443-5s, hss ground thread hand tap set m 4x0.7, hss ground thread hand tap set m 5x0.8, hss ground thread hand tap set m 6x1, hss ground thread hand tap set m 8x1.25, hss ground thread hand tap set m 10x1.5, hss ground thread hand tap set m 12x1.75, hss ground thread hand tap set m 14x1.5, digital ma clamp on meter

Thin Film Measurement Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government And Public Sector

State Government