Latest thread Tenders | Government thread Tenders

Central Government/Public Sector

CTN :45102483

25 May, 2026 NA

Amritsar - Punjab

Tender For supply of set of thread ring go / no-go gauges for lhb coaches. one set of go & no-go thread gauge should have following item (description & qty) : 1) size : m16x2.0 mm-6g (one thread ring gauge go &no-go gauges) - 01 pair. 2) size : m20x2.5 mm-6g (one thread ring gauge go & no-go gauges) - 01 pair.3) size : m8x1.25 mm-6g (one thread ring gauge go & no-go gauges) - 01 pair. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45117051

25 May, 2026 NA

Yamunanagar - Haryana

Tender For supply of set of high tensile hardwares for fiat bogies (each item in the set to bepacked individually, before final packing all items of set in a box), as per drawing:mplfiaththw1 version 0, packing instruction: set of high tensile hardwares for fiat bogies:- size-wise hardwares should be packed suitably to avoid thread damage, in biodegradeable polythene packet, clearly mentioning the nomenclature of hardware. then collectivelly packed in card board box of sufficent strength, further tied with suitable no. of nylon strips. a well protected list should be pasted on box bearing purchase order no, pl no., description, qty, firm's name & address, date of despatch etc. the transit damange if any shall be at the cost of supplier [ warranty period: 30 months after the date of delivery ]

State Government

CTN :45028920

25 May, 2026 NA

Medininagar - Jharkhand

Tender For supply of line materials under electric supply area medininagar - electrical items :, ms nuts bolts for 33kv/11 kv/dss line(full thread galvanized) assorted sizes

Private Sector

CTN :45305108

13 Jun, 2026 NA

Ranchi - Jharkhand

Tender For mother dairy fruit & vegetable private ltd. food processing unit (fpp) have a requirement of nylon thread, bopp tape as per attached detailed boq.

Central Government/Public Sector

CTN :45283774

28 May, 2026 NA

Kanpur - Uttar Pradesh

Tender For supply of set of fixture pin , material - en - 8 (a) - emu fixture half threaded pin , size - total length - 60 mm , diameter - 14 mm , thread length - 26 mm . (b) l shape emu fixture pin , size - length - 73 mm, diameter - 4mm . bend length - 28 mm. (c) l shape tao fixture pin , size - length - 60 mm , diameter - 5 mm , bend length - 20 mm. consisting item = a, b & c = 01 set [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45281601

18 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For annual sectional contract for repairs & maintenance work and supply of material under aden/ hq-ii /jhs for year 2026-27 a) zone no-2a-2 jhs (railway station & circulating area) b) zone no-2a-3 jhs - stone aggregate (single size): 10 mm nominal size, bitumen emulsion, portland cement (opc-43 grade), white cement, c.p. brass extension nipple (15mm x 50 mm), oxidised mild steel butt hinges 125x65x2.12 mm, oxidised mild steel butt hinges 100x58x1.90 mm, anodised aluminium butt hinges 100x63x3.2, anodised aluminium sliding door bolt 250x16 mm, anodised aluminium tower bolt (barrel type) 200x10 mm, anodised aluminium tower bolt (barrel type) 150x10 mm, anodised aluminium handles 125 mm with plates 175 x 32 mm, satna lime, acrylic distemper 1st quality, haing voc content less than 50 grams/liter, premium plastic acrylic emulsion of interior grade, having voc content less than 50 grams/liter, aluminium paint, synthetic enamel paint in black or chocolate shade, synthetic enamel paint in all shades except black or chocolate shade, coursed sand (zone iii), structural steel such as tees, angles channels and r.s. joists, galvanised steel or l hooks 8 mm dia, bolts and nuts up to 300 mm in length, 18 mm dia c.p. brass/ s.s. jet with flexible tube upto 1 metre long with s.s. tringular plate for eureopean type w.c., mirror of superior make glass 60x45 cm, pig lead, gl pipes 15mm dia, gl pipes 20 mm dia, gl pipes 25mm dia, gi union 15mm nominal bore, gi union 20mm nominal bore, gi union 25mm nominal bore, gi union 50mm nominal bore, white plastic seat isolid) with lid c.p. brass hinges and rubber buffers, shower rose c.p. brass for 15 to 20 mm inlet 100 mm dia, shower rose c.p. brass for 15 to 20 mm inlet 150 mm dia, h.p. or l.p. ball valve with polythene floats: 15mm dia, h.p. or lp. ball valve with polythene floats: 20 mm dia, h.p. or lp. ball valve with polythene floats: 25 mm dia, full way valve with c.i. wheel (screwed end) brass 125 mm dia, brass full way valve with c.i. wheel (screwed end) 50 mm dia, vitreous china flat back wash basin 550x400 mm, c.p. brass waste 32 mm, c.p. brass waste 40 mm, vitreous china orrisa type w.c. pan of size 580 mm, vitreous china pedestal type water closet, ply wood 5 ply with commercial ply on both faces 6 mm thick, 12 mm commercial ply, common burnt clay f.p.s (non modular) bricks class designation 7.5, weather sealant -non staining (600 ml), c.i. sluice valve (with caps) class ii: 100 mm dia, c.i. sluice valve (with caps) class ii: 150 mm dia, red oxide zine chromate primer, gp-2 cememtitious compound, galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of wire 0.63 mm, frosted glass sheet of nominal thickness 4 mm (wighting not less than 10kg/sqm), aluminium hanging floor door stopper with twin rubber & stopper, hydraulic door closer tubular type aluminium section body, semi rigid pvc waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c pvc waste fittings, bottle trap, cp brass single lever telephonic wall mixer of approved make, u-pvc pipes (working pressure 4 kg/cm²) single socketed pipe 75 mm dia, u-pvc pipes (working pressure 4 kg/cm²) single socketed pipe 110 mm dia, upvc bend 87.5° 75 mm bend, upvc bend 87.5° 110 mm bend, c.p. brass bibcock 15 mm, c.p. brass long nose bibcock 15 mm, c.p. brass long body bibcock 15 mm, c.p. brass stop cock (concealed) 15 mm, c.p. brass angle valve 15 mm, binding wire, flushing cistern p.v.c. 10 litre capacity (low level-white) with fittings, accessories and flush pipe, white vitreous china clay half stall urinal flat back 580x380x350 mm or angle back 450x375x350 mm with waste fittings as per is:2556, 15 mm ptmt bib cock, 15 mm dia ptmt stop cock (male thread), ptmt pillar cock, ptmt push cock 15 mm dia, ptmt pillar cock (fancy) 15 mm foam flow, turpentine oil, 15 mm nominal bore and 45 cm length pvc connection pipe with p.t.m.t. nuts, sbr polymer, premium acrylic exterior paint(p.way training center)

State Government

CTN :45263347

03 Jun, 2026 NA

Sealdah - West Bengal

Tender For supplying the official stationary goods to the wbhb for the time period from 15th june 2026 to 31st march 2027. - part-a stationary itemsa-4 xerox paper (75 gsm) jk copier, arch file (small) good quality, binder clip [steel made] (big) good quality, binder clip [steel made] (small) good quality, celo tape (big)-2" good quality, celo tape (medium)-1" good quality, celo tape (small)-1/2" good quality, channel file good quality, cover file [four fold] good quality, correction pen (whitener pen) kores, double hole punching machine kangaro good quality, double hole punched clip file (paper made) good quality, duster (big) size-600x600 mm good quality, duster (small) size- 450x450 mm good quality, envelope [big] (cloth pasted)- size-40/30 cm. good quality, envelope [medium] (cloth pasted)-size-34/25 cm. good quality, fevistick gum super (15gm) good quality, flap good quality, highlighter pen (multi colour) luxors, l- folder good quality, marker pen (thick) luxors, pencil (doms) good quality, puncher (single) kangaro, stepler (small) [plastic cover] kangaro, stepler (jumbo) kangaro, stepler pin (jumbo) kangaro, stepler pin (small) kangaro, tag good quality, page marker (multi coloured flag) good quality, james clip (steel made small) good quality, plastic scale big camlin, eraser camlin, knife (polo cutter) good quality, scissor (5.5") good quality, stamp pad camlin, thread ball good quality, good quality towel - for chair ( brand raymonds or equivalent), hand towel good quality, wet wipes facial tissue with box, diary premium quality (19 x 24) cm, transperant plastic folder, dustbin big size, tupperwerewater bottle 1ltr transparent, reynolds/ pentonic ball pen/ agni gel, tea cup set good quality porcelain, glass set borosil, wooden pen stand, table decorative items 1) table top plants ,, small idols, table top air purifier etc., paper weight good quality, photo frames. good quality (24 x 16) inch.

Central Government/Public Sector

CTN :45210103

08 Jun, 2026 NA

Bhusawal - Maharashtra

Tender For supply of set of spares for sanding pipe arrangement for wag-7 locos as per sketch no. bsl/elw/sk.no. 9152 consisting of 04 items 25 nos 1) sand pipe 25 nb(med) 1.3 mtr long to clw drg.no.06/1/21/2 ref 1 with flange elbow thread ref 1.5-08 nos. 2) sand pipe bracket 25 nb to clw drg no. 06/1/21/2 ref 2 -08 nos. 3) mounting channel to clw drg no. 06/1/21/2 ref 4-01 nos. 4) pipe clip to clw drg no. 06/1/21/2 ref 7-08nos. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45210228

16 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of lumbar spine 2 level pedicle screws with two rods and tlif bullet cage all titanium. (specifications: 2 level multiaxial pedicular screw system with inni and with 1 tlif titanium cage, 2 level multiaxial pedicular (6) screw system (5.5mm, 6.5mm and 7.5mm diameter and 30,35,40,45, 50 and 55mm lengths) with inni and 2 rods (5.5 mm) with 1 bullet titanium cage (22mm and 26 mm length and 8mm, 10mm, 12mm, and 14mm height), a. the system should be with 5.5 mm rod for fixation and have g4 reverse thread technology to avoid cross threading. b. screw system should have lesser implant volume with maximum angle of 28 degree between the head and screw body to avoid facet joint preservations. c. the cage must be of titanium material d. should be self-distracting bullet shaped with convex shape designed to fit patient anatomy. e. cage should be compatible with mis, endoscopic and open procedures at multiple levels.) ]

Central Government/Public Sector

CTN :45091447

28 May, 2026 NA

Bhavnagar - Gujarat

Tender For corrigendum : supply of modification of wheel set earthing equipment as per rcf drg no. sked-945 set consistingof 6 items: 1. stainless steel bush, l=l8mm, thread size m12x1.75(outside)/m8x1.25 (inside) (mat. aisi304) to match with m8 allen screw). spec/drg: sked 945 - qty -03 nos/set. 2.stainless steel bush,l=15mm, thread size m12xl.75(outside)/m8x1.25 (inside) (mat. aisi 304) to match with m8 allen screw)spec/drg: sked 945 - qty -02 nos./set. 3.stainless steel bush, l=10mm, thread sizem12xl.75(outside)/m8x1.25 (inside) (mat. aisi 304) to match with m8 allen screw) spec/drg: sked 945 -qty -01 no./set. 4. stainless steelstud m8x55mm (mat. aisi 304) spec/drg: sked 945 - qty -02 nos./set.5. stainless steel stud m8x50mm (mat. aisi 304) spec/drg: sked 945 - qty -01 no./set 6. stainless steellock nut, m8 spec/drg: sked 945 - qty -03 nos./set [ warranty period: 30 months after the date of delivery ]

Thread Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors