Latest threaded bolt Tenders | Government threaded bolt Tenders

corporations/Associations/Others

CTN :45723624

02 Jul, 2026 6.00 Lacs

Salem - Tamil Nadu

Tender For supply delivery and fixing of motor and accessories at ward-1 selliyampalayam oht in narasingapuram municipality - supply and delivery of kirloskar make 15hp/11kw/2900rpm three phase/415v/50hz/ac/tefc horizontal centrifugal monoblock pump impeller-mechanical seal (head-20mtr,flow rate-2154lpm) size:100x100mm (local quotation) 15hp horizontal centrifugal monoblock pump, labour charges for erection of horizontal shaft, centrifugal pumpset (coupled/monoblock) in bore well/open well including fixing of suction pipe and foot valve upto a maximum depth of 7 metres and delivery pipes to the required length with valves,pressure gauges upto the exterior wall of pump room and erection of panel board consisting of tpic switches starter, voltmeter, ammeter, capacitor single phasing preventor and laying and jointing the cables and twinearthing as per ie rules including providing bed blocks etc., complete and operating the pumps and trial run for 10 days including signing of completion of reports as required by eb authorities., three phase panel board star- delta with two level guard and auto start supply and delivery of star-delta starter confirming to is 13947, iec60947-1 and as amended thereafter with suitable kw rating for operation in ac/ three phase/50hz (+/- 5%) and 415v (+/- 10%) including 3 pole magnetic contactor with under voltage release - 3 nos., ct operated ammeter (65 mm dia) with suppressed scale,voltmeter (65mm dia),voltmeter selector switch,miniature circuit breaker, thermal overload relay, air break contactors suitable for next standard higher kw rating, single phasing preventor, dry running preventor and on/off push button switches, wiring with 1 sq.mm/4 sq. mm copper pvc insulated cable, powder coated vermin proof box, including the capacitor (the cost of capa citor is to be taken separately). three phase panel board for 15hp, supply,delivery and fixing of the following materials are listed below etc..,as directed by the departmental ofiicers.for service4 core 16sq.mm pvc copper ug cable, for motor3 core 6sq.mm pvc insulated and sheathed flat type copper cable, 150mm di pipe, 100mm gi pipe , 100mm gi flange set, rubber sheet for flange set, ms bolt and nut20mm dia and above x 90mm to120mm length fully threaded bolts andwith nuts 2 nos. , manhole cover 60 x 60cm (heavy duty) with frame, supply, erection, testing and commissioning of cast iron body and bronze internal non-rising spindle sluice valve of sizes at required places to control the flow of water including necessary ms flange of table e , gaskets, bolts & nuts including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the departmental officers. 150mm sluice valve, 100amps 4pole mcb, 100amps porcelain fuse unit (500v), 32mm pipe

Central Government / Public Sector

CTN :45731195

14 Jul, 2026 NA

Hyderabad-T - Telangana

Tender For supply of stainless steel hexagonal head full threaded bolt of size m6x50 mm with suitable nut - 01no. (width : 5-6 mm with sharp edges for proper spanner fitment), plain washer-02nos (thickness : 1.4-1.6 mm) and spring washer-01nos (all nut & washers are of ss only) complete in assembled conditionas per ss grade 304. 10 nos. sample to be approved before bulk supply. [ warranty period: 30 months after the date of delivery ] ]

CTN :45733123

08 Jul, 2026 NA

Varanasi - Uttar Pradesh

Tender For auction sale of pway scrap - us ms scrap (a-slide chair plate 52 kg-287 nos, b-fish plate 90r 18"-06 nos, c-fish plate 52 kg 24"-46 nos, d-spl bearing plate 52 kg-37 nos, e-jn.fish plate 90r/52kg-10 nos, f-gauge tie plate off sizes, g-fish plate 52kg & 60 kg (1.oo m off sizes)-18 nos, h-joggle fish plate 52kg-180 nos, i-strecherbar with clite off sizes 52 kg-230 nos,j-rail screw off sizes-6360 nos,k-joggled clamp with bolt,l-ms bolt off sizes-1250 nos,m-ms rail flange 52kg & 9r& n-misc ms scrap (in up state)

CTN :45733171

07 Jul, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot ferrous scrap - lot no.m.mms.exmp.d & i.06.2026-27.05 description- mixed ferrous melting scrap amalgamating the various types consisting of fresh plate, sheets plate cuttings and shearing of all shapes and sizes. structural sections, scrap low phosphorous steel, iron pipes, bar fittings, buffer cases and plungers (other than cast steel) sleeves and spindles with heads, screw couplings, tie bars, all types of equalising beams & centralize beams, fish plate other than cast steel), wire & wire rope, all types of sleeper, all types of bars and rods, junk kutchra, steel fabrication, nut bolt, grease seal etc. (our offer): mixed ferrous melting scrap amalgamating the various type consisting of fresh plate, sheets plate cuttings and shearing of all shapes and sizes, structural sections, lever, scrap low phosphorous steel, iron pipes, bar fittings, flap door, irs sleepers, shaft, wire rope, pipes, brake cylinder, buffer cases and plungers other than cast steel sleeves and spindles with heads, screw couplings, tie bars, all types of centralize beams, pendrol clip, fish plate other than cast steel, all types of bars and rods, junk kuchra, steel fabrication, nut bolt, grease seal etc., as in the lot. materials are laying in one place at "d-1" sector & two places at "i-2" sector. before bidding, bidders are requested to inspect the lot. cutting may be allowed only for off sizes for loading purpose. loading will be done by purchaser's own arrangement.

CTN :45733175

07 Jul, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot ferrous scrap - lot no.y.mms.exmp.f-1.06.26.56 description- mixed ferrous melting scrap amalgamating the various type consisting of scrap classes like- fresh plate & sheets plate cuttings and shearing of all shapes and sizes structural sections.scrap low phosphorous steel .iron pipes .bar fittings .buffer cases and plungers (other than cast steel ) sleeves and spindles with heads .tie bars .all types of equilising beams & centralize beams , wire and fish plate other than cast steel.wire & wire rope,all types of chains, all types of sleeper ,shock observer some quantity of negligeable nf item may be attached , all types of bars & rods. junk kutchra, spring wire , screw couplings, steel fabrication and misc, nut bolt,grease seal etc. as in the lot (above item may or may not be available in the lot) [loading will be done by purchaser's own arrangement]

CTN :45733176

07 Jul, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot ferrous scrap - lot no.m.mms.exmp.f & g.06.2026-27.04 description- mixed ferrous melting scrap amalgamating the various types consisting of fresh plate, sheets plate cuttings and shearing of all shapes and sizes. structural sections, scrap low phosphorous steel, iron pipes, bar fittings, buffer cases and plungers (other than cast steel) sleeves and spindles with heads, screw couplings, tie bars, all types of equalising beams & centralize beams, fish plate other than cast steel), wire & wire rope, all types of sleeper, all types of bars and rods, junk kutchra, steel fabrication, nut bolt, grease seal etc. (our offer): mixed ferrous melting scrap amalgamating the various type consisting of fresh plate, sheets plate cuttings and shearing of all shapes and sizes, structural sections, lever, scrap low phosphorous steel, iron pipes, bar fittings, flap door, irs sleepers, shaft, wire rope, pipes, brake cylinder, buffer cases and plungers other than cast steel sleeves and spindles with heads, screw couplings, tie bars, all types of centralize beams, pendrol clip, fish plate other than cast steel, all types of bars and rods, junk kuchra, steel fabrication, nut bolt, grease seal etc., as in the lot. materials are laying in one place at "f" sector & one place at "g-1" sector before bidding, bidders are requested to inspect the lot. cutting may be allowed only for off sizes for loading purpose. loading will be done by purchaser's own arrangement.

CTN :45733158

08 Jul, 2026 NA

Multi City - Odisha

Tender For auction sale of others - lot no.- sse/cs/2026-27/15 desc. - (1) wag-9 lipped racer of wag9 loco - 20 nos. wt..=97.600kgs (2) hanger lever( kbil/ftil make)of wag-9 loco -72 nos. wt..= 907.200 kgs (3) wheel set guide of wag-9loco -15 nos. wt..= 361.500 kgs (4) wag -9 plain racer of wag9loco -20 nos.wt.. 76.200kgs (5) sets of cover of axle box of wag-9loco - 05 sets wt.. 657.500 kgs (6) gear case assembly of wag-9loco -10 nos. wt.. = 2097 kgs (7) torque arm of wag-9 loco - 10 nos. wt.. 241 kgs (8) axle box of wag-9 loco -20 nos. wt.. =2160 kgs (9) miscellaneous (pins ,bushes ,link, friction arm,fasteners, brake equalizers plate ,washers, cotter pins ,turnion,clevis,arm spring ,adjusting equipment ,spacer & tie bar ,equalizer, hanger inside & outside ,nut bolts , safety sling, threaded bolt ... etc) wt..= 1000 kgs total ferrous wt..= 7.598 mt

CTN :45399260

06 Jul, 2026 45.56 Lacs

Ganganagar - Rajasthan

Tender For corrigendum : tn-mm-2170 supply of railway track material for private siding and marshalling yard of sstps suratgarh - cms crossing 1:8.5, 52kg to rdso drg. no. t-4867, cms crossing 52 kg 1 in 12 rdso drawing no. t-4734, slide chair plate 52 kg of 1: 8.5 (01 set= 20 nos. plate) railway drawing no. :- t-4968, combination fish plate 60 kg and 52 kg to rdso drg. no. t-696-699 (1 set = 2 pair (4 fish plate, 8 nut,8bolt), glued joint 60kg to rdso drg no. t-5843, glued insulated rail joint g-3(l) for 52 kg rail rdso no- t- 671, check rail set at 4.33 mtr. for 1 in 8.5 of crossing bg for 52 kg rdso drawing no. rt-4773, gauge tie plate 52 kg of 1:8.5 railway drawing no.:- t-5812, t-5812/1, t-5812/2, ms plate c/switch 52 kg of 1:8.5 for lever box railway drawing no.t-3901, bearing plate of c/switch 52 kg 1:8.5 (01 set= 06 nos.) railway drawing no. t-4869 to t-4874, fish plate for 52 kg rail 610 mm long rdso n0- t-(090)(one setcomprise of 2 nos. fish plate & 4 nos. fish bolt & nut), galvaized nut & lock nut id-no. 3/16 and bolt with flat&spring washer size(16x50x38 )mm as per rdso no eti/c/0073, gfn liner 60 kg to rdso drg. no. t-3706, 60s approach sleeper of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4786, 60s-1as approach sleeper of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4787, 60 -2as approach sleeper of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4788, 60-3a approach sleeper of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4789, 60-4a approch sleeper of point& crossing 1 in 8.5 52 /60 kg as per rdso n0.4790, sleeper n0.1 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4791, sleeper n0.2 of point& crossing 1 in 8.5 52 /60 kg as per rdso n0.4791, sleeper n0.3 of point& crossing 1 in 8.5 52 /60 kg as per rdso n0.4793, sleeper n0.4 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4794, sleeper n0.5 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4795, sleeper n0.6 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4796, sleeper n0.7 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4797, sleeper n0.8 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4798, sleeper n0.9 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4799, sleeper n0.1 0 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4800, sleeper n0. 1 1 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4801, sleeper n0.1 2 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4802, sleeper n0.1 3 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4803, sleeper n0.1 4 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4804, sleeper n0.1 5 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4805, sleeper n0.1 6 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4806, sleeper n0.1 7 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4807, sleeper n0.1 8 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4808, sleeper n0.1 9 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4809, sleeper n0.20 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4810, sleeper n0. 21 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4811, sleeper n0.22 of point& crossing 1 in 8.5 52 /60 kg as per rdso n0.4812, stretcher bar of c/switch 52 kg of 1:8.5 (01 set= 06 nos.) railway drawing no.- t-4885- 86, t-4887-88, t-4889-90, rail dolly bg attachment for transportation of prc sleeper with insulated wheel, grsp for 1:8.5 t/out, 52 kg to rdso drg. no. t-4865, gfn liner rt-3707, gfn liner rt-3708, improved sej 60 kg with complete fitting (rt-4902) and with psc sleepers (rt-4149) for max. gap =80 mm(in single gap)(fittings- plate screw,washer,nut bolt,m.s. bracket,c.i. chair,check rails,tongue rails,stock rails,gap avoid rails,split pin etc. as per rdso numbers), 1 in 12 curved switch (lh turnout/rh turnout, 01 rh and 01 lh tounge rail length 12356 mm and stock rail 01 lh & 01 rh 13000 mm l

CTN :45399878

06 Jul, 2026 45.56 Lacs

Ganganagar - Rajasthan

Tender For corrigendum : supply of railway track material for private siding and marshalling yard of sstps suratgarh - cms crossing 1:8.5, 52kg to rdso drg. no. t-4867, cms crossing 52 kg 1 in 12 rdso drawing no. t-4734, slide chair plate 52 kg of 1: 8.5 (01 set= 20 nos., plate) railway drawing no. :- t-4968, combination fish plate 60 kg and 52 kg to rdso drg., no. t-696-699 (1 set = 2 pair (4 fish plate, 8, nut,8bolt), glued joint 60kg to rdso drg no. t-5843, glued insulated rail joint g-3(l) for 52 kg rail rdso, no- t- 671, check rail set at 4.33 mtr. for 1 in 8.5 of crossing bg, for 52 kg rdso drawing no. rt-4773, gauge tie plate 52 kg of 1:8.5 railway drawing no.:-, t-5812, t-5812/1, t-5812/2, ms plate c/switch 52 kg of 1:8.5 for lever box, railway drawing no.t-3901, bearing plate of c/switch 52 kg 1:8.5 (01 set= 06, nos.) railway drawing no. t-4869 to t-4874, fish plate for 52 kg rail 610 mm long rdso n0- t-, 090)(one setcomprise of 2 nos. fish plate & 4, nos. fish bolt & nut), galvaized nut & lock nut id-no. 3/16 and bolt, with flat&spring washer size(16x50x38 )mm as, per rdso no eti/c/0073, gfn liner 60 kg to rdso drg. no. t-3706, 60s approach sleeper of point & crossing 1 in 8.5 52, 60 kg as per rdso n0.4786, 60s-1as approach sleeper of point & crossing 1 in 8.5, 52 /60 kg as per rdso n0.4787, 60 -2as approach sleeper of point & crossing 1 in 8.5, 52 /60 kg as per rdso n0.4788, 60-3a approach sleeper of point & crossing 1 in 8.5 52, 60 kg as per rdso n0.4789, 60-4a approch sleeper of point& crossing 1 in 8.5 52, 60 kg as per rdso n0.4790, sleeper n0.1 of point & crossing 1 in 8.5 52 /60 kg as, per rdso n0.4791, sleeper n0.2 of point& crossing 1 in 8.5 52 /60 kg as, per rdso n0.4791, sleeper n0.3 of point& crossing 1 in 8.5 52 /60 kg as, per rdso n0.4793, sleeper n0.4 of point & crossing 1 in 8.5 52 /60 kg as, per rdso n0.4794, sleeper n0.5 of point & crossing 1 in 8.5 52 /60 kg as, per rdso n0.4795, sleeper n0.6 of point & crossing 1 in 8.5 52 /60 kg as, per rdso n0.4796, sleeper n0.7 of point & crossing 1 in 8.5 52 /60 kg as, per rdso n0.4797, sleeper n0.8 of point & crossing 1 in 8.5 52 /60 kg as, per rdso n0.4798, sleeper n0.9 of point & crossing 1 in 8.5 52 /60 kg as, per rdso n0.4799, sleeper n0.1 0 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4800, sleeper n0. 1 1 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4801, sleeper n0.1 2 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4802, sleeper n0.1 3 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4803, sleeper n0.1 4 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4804, sleeper n0.1 5 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4805, sleeper n0.1 6 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4806, sleeper n0.1 7 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4807, sleeper n0.1 8 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4808, sleeper n0.1 9 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4809, sleeper n0.20 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4810, sleeper n0. 21 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4811, sleeper n0.22 of point& crossing 1 in 8.5 52 /60 kg as, per rdso n0.4812, stretcher bar of c/switch 52 kg of 1:8.5 (01 set= 06, nos.) railway drawing no.- t-4885- 86, t-4887-88, t-, 4889-90, rail dolly bg attachment for transportation of, prc sleeper with insulated wheel, grsp for 1:8.5 t/out, 52 kg to rdso drg. no. t-4865, gfn liner rt-3707, gfn liner rt-3708, improved sej 60 kg with complete fitting (rt-, 4902) and with psc sleepers (rt-4149) for max., gap =80 mm(in single gap), (fittings- plate screw,washer,nut bolt,m.s., bracket,c.i. chair,check rails,tongue, rails,stock rails,gap avoid rails,split pin etc., as per rdso numbers), 1 in 12 curved switch (lh turnout/rh turnout, 01, rh and 01 lh tounge rail length 12356 mm and s

corporations/Associations/Others

CTN :45492398

30 Jun, 2026 8.73 Lacs

Sonbhadra - Uttar Pradesh

Tender For corrigendum : supply of with washer m 12x 30 threaded in inch , ms bolt with nut size m10x 60 , m24 ms bolt with nut half threaded 18x 50 mm threaded in inch , h t nut and bolt with two number plain washer 16x 50 mm , h t bolt with nut double washer 16x 65 mm for door aph grade 10 9 , ms plain washer m 12 washer od 30mm grade 10 9 , ms plain washer od 40 id 16 washer od 45mm use in aph sealing grade 10 9 , h t hex bolt and nut 20x 120 coal pipe coupling bolt round head bolt with nut washer grade 1 09 , ht hex head m 24x 120 coupling bolt round head bolt with nut washer , ht bolt with nut ft with double washer m16x 40 for aph sealing , ht eye bolt with nut size m12x 80 drum separator , h t eye bolt 16 x 90 , hthh half threaded bolt with nut and washer of follo , hex agonal ms bolt with nut and washer m 16x 100 mm qty 50 no , ms hex nut and bolt with washer m 12x 40 mm ft , h t bolt and nut 6 x 30 mm , h t bolt and nut 8x 40 mm , h t allen bolt 10 x 40 mm , h t bolt with nut 12x 65 mm , h t bolt with nut 16x 65 mm , h t nut and bolt size 16x 80mm , h t bolt with nut 20x 80 mm , h t bolt with nut 20 x 100 mm , h t stud with double nut for dss medial hang 38 x 290 mm , stud with double nut for dss lower flange 34 x 270 mm , h t eye bolt m 20 x 120 mm , h t eye bolt m 18 x 70 mm , ht hex head m 24x 120 , ht stud 30x 170 , ss bolt material aisi 304 along with nut and washer size 32x 173 stud with bolt , h t hex bolt and nut m 24x 150 , h t hex bolt and nut 20x 120 , stud with nut m30x 300 , ht stud with double nut 24x 100 mm , h t bolt with nut 24x 100 , ht nut bolt with simple washer 24x 80mm , allen bolt size 12x 65 mm , ms nut and bolt with washer 20x 100 mm , ms bolt with nut 20x 80 mm , brass plug d1 12 mm d2 6mm l 18mm , brass plug d1 22 mm d2 17mm l 28mm , brass plug d1 16 mm d2 11mm l 22mm , brass plug d1 10 mm d2 4mm l 18mm , gear coupling of hd 31 valve actuater , gear of v 7 15 27 v v actuater od 110 , gear of actuater of dish valve of bfp , s s stud with nut 12 x 80

Threaded Bolt Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government / Public Sector

corporations/Associations/Others