Latest threading holder Tenders | Government threading holder Tenders

corporations/Associations/Others

CTN :40126145

05 May, 2025 2.62 Lacs

Pimpri - Maharashtra

Tender For 22/2025-26 purchase of laqshya instruments - purchase of instruments ( laqshay), radiant warmer- technical specification of radiant warmer with baby bassinet a radiant warmer is used to keep the patient s core temperature stable at 37 o c. it should be microprocessor controlled radiant warmer with manual and servo options. it should have facility to display both skin and air (ambient) temperature separately.. it should have audiovisual alarm facility for overheating beyond set temperature range. it should have alarm facility for patient temperature less than or greater than the required temperature i.e. above or below the set range. it should rotate and swivel in different direction, so as to allow taking x-ray. the light should be dazzle free. it should have alarm for power failure. it should have alarm for heater failure and auto cut off for high temp. it should have alarm for probe failure. it should have time out alarm in manual mode. it should have facility to auto reset the system in case of hang up caused by power fluctuation. it should have manual setting for high and low alarm setting. in servo mode, the heater output should be controlled to maintain the baby at the required set temperature. in manual mode, the heater output should be directly controlled by a setting on the front panel should have a facility to lock the keyboard to avoid unwanted user. the desired temperature range from 25 to 40 degree c. the resolution should be 0.1 degree c halogen based observation light should be provided for observing the baby. it should be mounted on a pole with sturdy base with lockable castors power supply: power input to be 220-240 vac, 50hz fitted with indian plug. certificate of calibration and inspection from the factory. warranty: comprehensive warranty for 5 years after warranty documentation: user, technical, maintenance manuals to be supplied ce, iso certified , fetal doppler - technical specification of fetal doppler should be compact, table type and light weight. large lcd display for display of fetal heart rate. back light for better visibility display signal quality, low battery, etc., high sensitivity doppler probe of frequency 2.0 mhz ultra sound intensity 10mw/cm2. built-in speaker with output not less than 1.0w should work on rechargeable batteries with minimum battery time of 300minutes. battery charger and spare set of batteries aa type to be supplied. volume control facility and audio output for ear phone should be available. heart rate range should be from 50 to 240 b pm with accuracy of + /-2% should be water proof body. should have facility for fhr data transfer to pc. doppler probe should be light weight with holder facility when not in use. should be supplied with carrying case. machine should be iso mark, baby digital thermometer - technical specification of baby digital thermometer range 0.1 to 1000 degree centigrade measurement mode- min, max, average, differential, dual temperaturereading measurement unit- degree centigrade, degree fahrenheit,kelvin temperature probe with connecting cable relative humidity10 to 90% rh non-condensing ip rating- ip 40 g) probe response time 2-3 seconds it should be who & unicef standards, delivery trolley/patient stretcher trolley- technical specification of patient stretcher trolley overall size: 1905mm l x 710mm w x 660mm to 910 mm h. stretcher dimension 1830 mm l x 555 mm w. two section top. height adjusted by foot operated maintenance free hydraulic pump. height adjustment shall be obtained by hydraulically operated mono block type linear actuator pump foot operated actuation having stroke of 140 +/- 5 mm, push force 10 kn at 270 bars, number of complete pump stroke 22 to 24 for full stroke length x-ray permeable removable stretcher, backrest raised on ratchet. quick trendelenburg as well as reverse trendelenburg positions shall be provided with easily accessible operating handle provided with two gas springs for easy action. s.s. saline rod with 12 mm dia s.s

corporations/Associations/Others

CTN :40126147

05 May, 2025 2.62 Lacs

Pimpri - Maharashtra

Tender For 22/2025-26 purchase of laqshya instruments - purchase of instruments ( laqshay), radiant warmer- technical specification of radiant warmer with baby bassinet a radiant warmer is used to keep the patient s core temperature stable at 37 o c. it should be microprocessor controlled radiant warmer with manual and servo options. it should have facility to display both skin and air (ambient) temperature separately.. it should have audiovisual alarm facility for overheating beyond set temperature range. it should have alarm facility for patient temperature less than or greater than the required temperature i.e. above or below the set range. it should rotate and swivel in different direction, so as to allow taking x-ray. the light should be dazzle free. it should have alarm for power failure. it should have alarm for heater failure and auto cut off for high temp. it should have alarm for probe failure. it should have time out alarm in manual mode. it should have facility to auto reset the system in case of hang up caused by power fluctuation. it should have manual setting for high and low alarm setting. in servo mode, the heater output should be controlled to maintain the baby at the required set temperature. in manual mode, the heater output should be directly controlled by a setting on the front panel should have a facility to lock the keyboard to avoid unwanted user. the desired temperature range from 25 to 40 degree c. the resolution should be 0.1 degree c halogen based observation light should be provided for observing the baby. it should be mounted on a pole with sturdy base with lockable castors power supply: power input to be 220-240 vac, 50hz fitted with indian plug. certificate of calibration and inspection from the factory. warranty: comprehensive warranty for 5 years after warranty documentation: user, technical, maintenance manuals to be supplied ce, iso certified , fetal doppler - technical specification of fetal doppler should be compact, table type and light weight. large lcd display for display of fetal heart rate. back light for better visibility display signal quality, low battery, etc., high sensitivity doppler probe of frequency 2.0 mhz ultra sound intensity 10mw/cm2. built-in speaker with output not less than 1.0w should work on rechargeable batteries with minimum battery time of 300minutes. battery charger and spare set of batteries aa type to be supplied. volume control facility and audio output for ear phone should be available. heart rate range should be from 50 to 240 b pm with accuracy of + /-2% should be water proof body. should have facility for fhr data transfer to pc. doppler probe should be light weight with holder facility when not in use. should be supplied with carrying case. machine should be iso mark, baby digital thermometer - technical specification of baby digital thermometer range 0.1 to 1000 degree centigrade measurement mode- min, max, average, differential, dual temperaturereading measurement unit- degree centigrade, degree fahrenheit,kelvin temperature probe with connecting cable relative humidity10 to 90% rh non-condensing ip rating- ip 40 g) probe response time 2-3 seconds it should be who & unicef standards, delivery trolley/patient stretcher trolley- technical specification of patient stretcher trolley overall size: 1905mm l x 710mm w x 660mm to 910 mm h. stretcher dimension 1830 mm l x 555 mm w. two section top. height adjusted by foot operated maintenance free hydraulic pump. height adjustment shall be obtained by hydraulically operated mono block type linear actuator pump foot operated actuation having stroke of 140 +/- 5 mm, push force 10 kn at 270 bars, number of complete pump stroke 22 to 24 for full stroke length x-ray permeable removable stretcher, backrest raised on ratchet. quick trendelenburg as well as reverse trendelenburg positions shall be provided with easily accessible operating handle provided with two gas springs for easy action. s.s. saline rod with 12 mm dia s.s

Central Government/Public Sector

CTN :40136597

16 May, 2025 NA

Jaduguda - Jharkhand

Tender For supply of ratchet type torque wrench,ratchet handle as per is 7975,ratchet handle as per is 7975

corporations/Associations/Others

CTN :40141351

16 May, 2025 NA

Donimalai - Karnataka

Tender For supply of inch , 2100018803 chain wrench 6 inch , 2100000037 wrench chain 12in , 2100005743 wrench chain pipe 1250mm , 2100000546 circlip plier 25mm x 130mm lg tip 1point5mm , 2100016836 plier circlip straight nose 150 mm , 2100016831 plier circlip straight nose 230 mm , 2100001059 ext circlip plier 12 inch , 2100001106 circlip pliers 8 inch external circlip , 2100001058 int circlip plier 12 inch , 2100001105 circlip pliers 8 inch internal circlip , 1600195491 spanner combination spanner 6 7 8 9 10 , 2100016624 crow bar octagonal 25x1650mm , 2100016623 crow bar octagonal 32x1650mm , 2100000078 cutting plier 150mm , 2100001109 cutting plier 8 inch size w pvc insulator , 2100018649 de spanner 1point1by16 inch 1point1by8 inch and 1point1by4 inch , 2100018650 de spanner 1point1by2 inch x 1point3by8 inch , 2100000638 de spanner 16x17 , 2100000966 de spanner 18by19mm , 2100018648 de spanner 21x23 , 2100001014 de spanner 24 x 26 , 2100000636 de spanner 25x28 , 2100001015 de spanner 30 x 32 , 2100000995 de ring spanner 36 x 41 , 2100001016 de spanner 46 x50 , 2100001049 de ring spaner 55x60 , 2100000943 de spanner 1x5by16dash5by16x1by4 , 2100000595 de spanner set 6mm to 32mm , 2100017061 feeler gauge 0point01 dash 3point0mm , 2100000076 blade hacksaw 1by2x12in , 2100001538 hacksaw frame 12 inch , 2100018653 hand air grinder , 2100000681 ci heavy duty pipe wrench 55mmx300mm lg , 2100016641 wrench heavy dash duty pipe w length dash 600 mm , 2100000990 hydrometer , 2100018802 sockets 1 by2 inch drive 12 point 10mm , 2100000388 monkey plier , 2100000468 digital multimeter 0dash600vac 3 1by2 digit , 2100000648 nose plier 6 inch , 2100001036 nose plier 8 inch , 2100000404 pipe wrench 12 inch , 2100000405 pipe wrench 24 inch length , 2100000647 pipe wrench 36 inch , 2100000553 pipe wrench max op dash 55mm x 300 mm lg , 2100016946 plier bent nose 200 mm , 2100001359 plier long nose 170 mm , 2100015968 plier long nose 280mm , 2100001030 plier long nose 6 inch , 2100000970 ratchet 1 inch sq drive , 2100000945 ratchet 3by4 inch , 2100001542 ratchet handle 1by2 inch sq drive revers , 2100001543 ratchet handle 3by4 inch sq drive revers , 2100018651 ring spanner 1point1by16 inch and 1point1by8 inch and 1point1by4 inch , 2100000968 de ring spanner 1 dash 1 by2 inch x1 dash 3by8 inch , 2100000971 ring spanner 16 dash 17mm , 2100000972 ring spanner 18x19mm , 2100000065 spanner ring 21by23mm , 2100000973 ring spanner 24x26mm , 2100000096 spanner ring 25by28mm , 2100001019 ring spanner 30x32 mm , 2100018801 sockets set 1by2 inch drive set 5by16 dash 1 dash 1by4 inch , 2100018800 sockets set 10 dash 32mm 1by2 inch drive set , 2100000643 de closed ring type spanner set 1by4 inch to 1 , 2100015785 spanner ring 36x41 , 2100006679 spanner bihexagon ring 46x50 mm , 2100001048 de ring spanner 50x55 , 2100001480 ring spanner set 12pcs 6to32mm hd chrome , 2100000947 round file smooth 10 inch , 2100001597 round smooth file 6 inch , 2100001598 round smooth file 8 inch , 2100005582 screw driver flat tip 10x1point5 300mm , 2100005580 screw driver flat tip 13x1point9 450mm , 2100005808 screw driver flat tip 4x0point6 100mm , 2100005805 screw driver flat tip 4x0point6 200mm , 2100018810 screw driver philips 150mm , bid details/ 2 / 145 2100001367 screw driver philips 75mm , 2100000454 sledge hammer with wood handle 1point35kg , 2100001611 sledge hammer 12lbs , 2100001334 hammer sledge 2 kg , 2100018652 sledge hammer 6 lbs , 2100000507 slogging ring spanner 36mm , 2100000508 slogging ring spanner 38mm , 2100000509 slogging ring spanner 41mm , 2100000510 slogging ring spanner 46mm , 2100000511 slogging ring spanner 50mm , 2100005918 spanner slogging open ended 27 mm , 2100005917 spanner slogging open ended 30 mm , 2100005915 spanner slogging open ended 34 mm , 2100005914 spanner slogging open ended 36 mm , 2100005912 spanner slogging open ended 41 mm , 2100005911 spanner slogging open ended 46 mm , 2100005910 spanner slogging open ended 50 mm , 2100001365 socket set 8 d

CTN :40141407

17 May, 2025 NA

Jabalpur - Madhya Pradesh

Tender For supply of screw driver flexible fifteen inches , open spanner ten by eleven , open spanner twelve by thirteen , open spanner thirteen by fourteen , open spanner fourteen by fifteen , open spanner twenty four by twenty six , open spanner thirty by thirty two , round file six inches , square file six inches , half round file twelve inches , round file ten inches , flat file ten inches , chipping hammer one hundred fifty gms , steel punch riveting eight mm , welding nozzle no eight , small tap handle eight inches , round file ten inches bastred , adjustable spanner six hundred fifty mm , ratchet handle half inch drive , double ended swivel sockets wrench set ten by eleven , double ended swivel sockets wrench set twelve by thirteen , double ended swivel sockets wrench set eighteen by twenty one

CTN :40091129

13 May, 2025 NA

Kolkata - West Bengal

Tender For supply of surgicel fibrillar, 2 inch x 4inch box of 10 , prolene polypropylene size no 1 40mm cutting needle , size 3 0 70cm 1 slace 2 circle round body 20 mm violet polydioxanone pds ii box of 12 , xenon spare lamp 300 watt, 15 volt , 33 mm haemorrhoid 3 point 5 staple , 5mm lap clip applicator preloaded 20 clips , absorbable pgla 5mm mesh fixation device 15 to 30 tacks , absorbable suture coated polyglycolic 910 size no 1, 70 to 90 cms,rb , dressing opsite small port dressing box of 100 , hydrofiber dressing 9x10 cm , laparoscopic curved metzenbaum scissors with multifunctional handle 3mm, 29 cm length , laparoscopic drape kit consisting of laparoscopic drape with instrument pouch and tube holder , laparoscopic monopolar connecting cable with single pin , laparoscopic multiclip applier 05 mm preloaded 20 to 30 clips disposable , laparoscopic multiclip applier 10mm preloaded 20 to 30 clips disposable , laparoscopic self righting needle holder ss , laparotomy drape 100 x72x120 inch sterile with adhesive incise area 20 cm 33 cm, control plus fabric reinforcement tube holders m armboard cover and cautery bag surgiwear , loop ethilon no 1 , loop pds 40mm 1slace2 circle rb heavy no 1 , monofilament nylon non absorbable suture, size 2 0, 39mm, 3 slace 8 circle reverse cutting, 75cm, black in colour , multilayer tissue separating composite mesh of pdsii, polypropylene and oxidized regenerated cellulose size 15 x 15cm , multilayer tissue separating composite mesh of pdsii, polypropylene and oxidized regenerated cellulose size 15 x20cm , multilayer foam dressing with silicone adhesive size 5 point 5 x 12 cm , operation theatre drape set , pulv parasafe jar 810gm , sxmd 1b48 stratafix spiral pga pcl knotless barbed tissue control device 2 0 36mm 45cm 1 slace 2 circle tip unidirectional box of 12 , sxmd 1b48 stratafix spiral pga pcl knotless barbed tissue control device 3 0 36mm 45cm 1 slace 2 circle tip unidirectional box of 12 , laparoscopic graspers with ratchet handle 5mm, disposable , skin staples 35 staples per unit , polypropylene mesh 15 x 15 cms,mesh prosthesis for hernia medium slace polypropylene mesh, size 15cms x15 cms point composite light weight mesh , polypropylene mesh 30 cms x 30cms,mesh prosthesis for hernia medium slace polypropylene mesh, size 30cms x 30 cms point composite light weight , laparoscopic anti fog kit , antibacterial triclosan coated polyglactin 910, a 1 slace2 circle round body, 30mm, 90cm, size 2 0 vicryl , bipolar cautery cord compatible with valleylab bipolar forceps and ft10 generator e 0512, cord 3 point 6m slace 12ft , antibacterial triclosan impregnated polydioxanone loop suture,size 1,suture length 150cm, a 1 slace 2 circle heavy taper point round body steel alloy needle size 48mm, box of 24 foils , disposable monopolar cautery handpiece , multiclip applier preloaded for open surgery size large , multiclip applier preloaded for open surgery size medium , multiclip applier preloaded for open surgery size small , multilayer tissue separating composite mesh, poliglecaprone 25, polydioxanone and macroporous polypropylene, 20 x 25cm , closed system fecal management device for managing fecal incontinence slace diarrhoea and managing moisture associated skin dermatitis , circumcision stapler , opsite dressing for postop wounds 6 point 5 x 5 point 0 cm , aerosol spray for surgical instruments lubrication does not interfere in autoclaving process, bottle of 500ml , thermoshield extreme mild alkaline enzymatic cleaner for surgical instruments ph greater than10,with ce mark , high level sporicidal non toxic powder concentrate each , endo gia 45 mm reloads leg length 3 point 5mm compatible with endo gia universal stapler , endo gia 60 mm medium thick reloads with tri staple technology compatible with endo gia universal stapler , polydioxanone size 1, 90 cms,1 slace 2 circle needle 40 to 45 mm

Central Government/Public Sector

CTN :40093559

25 Apr, 2025 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of high grade chrome vanadium steel as per is 6131-1980 & 7381-1986 torque wrench 1/2 with set of 1/2 inch square drive bi hex agonal & hexagonal socket containing bi hexagonal sockets & hexagonal of size 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 23, 24, 26, 27, 2 8, 29, 30, 32, 33, 34 mm and the following accessories 1) ratchet handle 1/2 drive 2) extension bar 125 mm ,255 mm 1/2 drive 3) universal j oint t-handle 1/2 drive, offered make: taparia or equivalent of stanley. [ warranty period: 30 months after the date of delivery ]

CTN :40058097

09 May, 2025 NA

Prayagraj - Uttar Pradesh

Tender For supply of spanner and tools - de spanner 20x22 , mirror inspection , screw driver common 10 , chubby screw driver , extension , ring spanner , spanner socket box , ring spanner 30x32 , socket set , allen key set , king dick set , socket , screw driver philips , ratchet handle , socket 1 , extension bar , spanner ring 24x26 , adjustable wrench 6 , torque wrench upto 200 lbs

Central Government And Public Sector

CTN :40069091

30 Apr, 2025 NA

Kudankulam - Tamil Nadu

Tender For supply of combination wrench (q3) , center punch as per is 7177 (q3) , pliers, pincers and nippers as per is 2615, is 11526 (q3) , open jaw wrenches (spanners) as per is 2028 (q3) , ring wrenches (spanners) as per is 2029 (q3) , ratchet handle as per is 7975 (q3) , heavy duty pipe wrench as per is 4003 (q3) , screw drivers as per is 844 (q4) , ring slugging wrenches (spanners) - as per is 4509 (q4)

CTN :40078038

12 May, 2025 1.00 Lacs

Shahjahanpur - Uttar Pradesh

Tender For supply of socket set large , oil filter clamp , screw driver , ratchet handle , gypsy hub spanner , small socket , throttle body cleaner , rust spray w 40 , division flag , corps flag , brigade flag

Threading Holder Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

corporations/Associations/Others

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

Central Government And Public Sector