Latest three way cock Tenders | Government three way cock Tenders

Central Government / Public Sector

CTN :41322894

19 Aug, 2025 NA

Secunderabad - Telangana

Tender For supply, installation & commissioning of hydraulic job clamping wise for fixing of avm pads to 60kva lhb ac transformers on table (with work table, power pack, panel box & clamping wise with cylinder) with accessories consisting the following items and drawing en closed. 1) work table of size:1900x800x750 with top ms sheet of 8mm thickness 2) clamping wise with cylinder (heavy duty). 3) hydraulic p ower pack of electrical pump operated for hydraulic operation with foot pedal switch with 3hp motor, 5lpm pump, m28 coupling, bell hou se, manifold block, valve 240v, relief valve, suction strainer, breather, oil level indicator, pressure gauge, 70lts reservoir, oil grade syste m-68, electrical control panel with electrical safety for men working and equipment. [ warranty period: 30 months after the date of deliver y ]

State Government

CTN :41309790

09 Aug, 2025 73.78 Lacs

Raichur - Karnataka

Tender For overhauling & emergency works of turbine bearnings ,valves ,ms/hrh strainer & thermal insulation.

CTN :41186105

06 Aug, 2025 NA

Parganas - West Bengal

Tender For bid to ras bid to ras tender for supply of nut , plug , retainer , bolt , flat-head screw , spring , valve , exhaust , screw plug , ojde spanner 12x14 mm , spring , elbow , o ring , o ring , seal bearing , ojde spanner 19x22 mm , o ring , o-ring , liner , lower , gasket(fig-1510 by 05) , bolt , key , ring seal , clamp , pin dowel , lock , element filter , gasket , bearing needle , spanner , valve , adaptor , gasket , cable techo hour meter(fig-1045a) , element filter (ctlg fig-61) , strainer , ojde spanner 13x17 mm , spanner 10x11 mm (ojde open end) , spill tube , nut , seat , intake valve , insert , tihckness gauge allen key , 13 mm socket(sl no-g15313) , seat , exhaust valve , insert , seal , rod , spnr ojde 32x36mm , sensor oil pressure switch (fig-2010) , gasket , flange , clamp , clamp , plug , seat , set screw adjusting , hose , wrench hook(sl no-g15313) , gasket(fig no-3105) , fuse box cover , mc piping service kit , regulator & bush box assy , 22 mm socket(sl no-g15313) , o-ring , plate (fig-30) , lock , o ring (ms sl-120) , gauge , level , bolt , 27 mm socket(sl no-g15313) , seal , t handle 290mm , cap , pad rubber( fig no-5005 , sl no-13) , o-ring , seal , rectangular ring , o-ring , seal oil , lever , shaft , pto , bushing , aux diode(ctlg fig-10b) , metal ball(fig-4010 by 11) , lining brake , bushing , retainer , switch bty relay , cover , cyl .head (bd80 eng fig. no. 1150) , cover , body , adapter , tube , tube , wire harness , fuel pump , race inner 8b-5 by 150 , piston ring assy (containing 03 items) , race inner , scraper rh , hose(n743) , regulator (make lucas tvs)(ms) , gasket cyl head , lever , rod , cover , tube , injection no 1 , tube , injection no 2 , tube , injection no 3 , tube , injection no 4 , bearing ball , tube , element assy(fig-1410) , bit end rh (ctlg fig-7006) , tube , race inner , muffler , wire harness , front , shaft (os sl no-80) , plate main clutch (covered 04 plants) , puller 30 ton (ctlg sl-07) , hose , loose spring assy(fig 1015 , sl no-69) , operator seat assy , bracket , speedo meter (fig-12) , pulley , seat operators(ctlg fig-40) , bushing , gear driven 1st(fig-2125) , shaft intermediate , drive tachometer , bushing , gear driven reverse , seal ring assy , bracket lh , shaft , bushing , core assy , bonnet , arm , rocker assy , shifter clutch dog(price list sl-836) , bracket , bearing roller , oil pump assy , pressure spindle , oil cooler assy , fly wheel and rmg gear , starter motor assy self starter , power take off assy , flywheel assy(fig-2210) , frame lh (p-255)

State Government

CTN :41284399

11 Aug, 2025 3.50 Lacs

Dinajpur - West Bengal

Tender For as per aap alocation ( id - 110625976) - weight washer, plunger, mark 2 chain, axel, nut & bolt, bearing, top cap, head of mark2 tubewell, adopter, hendle, supply of pvc pipes & fittings schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i).(a) pvc pipes (dia)(p-13,item-19(iii)) i)15 mm, supply of pvc pipes & fittings schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i).(a) pvc pipes (dia)(p-13,item-19(iii)) ii)20 mm, supply of pvc pipes & fittings schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i).(a) pvc pipes (dia)(p-13,item-19(iii)) ii)25 mm, supply of pvc pipes & fittings schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i).(a) pvc pipes (dia)(p-13,item-19(iii)) ii)32 mm, supply of pvc pipes & fittings schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i).(a) pvc pipes (dia)(p-13,item-19(iii)) ii)40 mm, supply of pvc pipes & fittings schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i).(a) pvc pipes (dia)(p-13,item-19(iii)) ii)100 mm, supply of pvc pipes & fittings schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i).(a) pvc pipes (dia)(p-13,item-19(iii)) vii)redusing soket 100 x 40, supplying pvc strainer of approved make with adapter conforming to i.s.12818 specifications.(p-52,item-06) i) 40 mm, supplying pvc strainer of approved make with adapter conforming to i.s.12818 specifications.(p-52,item-06) i) 80 mm, supplying, fitting and fixing steel cutter piece upto 450 mm long with sockets.(p-53,item-09) i) 40 mm, supplying, fitting and fixing steel cutter piece upto 450 mm long with sockets.(p-53,item-09) ii) 75 mm, supplying, fitting and fixing 65 mm dia. deep well brass cylinder with necessary fittings and accessories.(p-54,item-15), supplying, fitting and fixing 15 mm dia. galv. m.s. connecting rod with sockets.(p-54,item-16), packing the annular space between the outside of the tube well pipes & strainers and the bore with pea size washed gravel of approved quality having size from 2 mm to 5 mm or the size approved by the engineer-incharge including cost of all materials labour and equipment complete.(note: initial 6 m. of annular space between the housing pipe and the bore should not be shrouded with pea size gravel to avoid contamination with surface water.)(p-55,item-24), taking out pipes of existing tube well including strainer etc. complete for portion of length: (p-56,item-01) (a) upto 20 metre below g.l. (i) 40 mm dia., taking out pipes of existing tube well including strainer etc. complete for portion of length: (p-56,item-01) (a) upto 20 metre below g.l. (ii) 80 mm dia., taking out pipes of existing tube well including strainer etc. complete for portion of length: (p-56,item-01) (a) upto 20 metre below g.l. (iii) 100 mm dia., taking out pipes of existing tube well including strainer etc. complete for portion of length: (p-56,item-01) (b) beyond 20 metre below g.l. (i) 40 mm dia., taking out pipes of existing tube well including strainer etc. complete for portion of length: (p-56,item-01) (b) beyond 20 metre below g.l. (ii) 80 mm dia., taking out pipes of existing tube well including strainer etc. complete for portion of length: (p-56,item-01) (b) beyond 20 metre below g.l. (iii) 100 mm dia., supplying, fitting and fixing brass cylinder parts. (i) brass plunger complete, supplying, fitting and fixing brass cylinder parts. (ii) brass plunger complete without g.i. rod, supplying, fitting and fixing brass cylinder parts. (iii) c.i. top socket, supplying, fitting and fixing brass cylinder parts. (iv) c.i. bottom socket, supplying, fittin

CTN :40615237

18 Aug, 2025 4.28 Crore

Nashik - Maharashtra

Tender For corrigendum : supply, installation and commissioning of kitchen equipment at kambalgaon - weighing scale ms platform weighing scale.electronic weighing scales of standard make to weigh upto 200 kg. the certificate from weights & measures dept. is to be attached with the machine, duly certifying the serial no. complete with accessories., sack pallete -having dynamic load carrying capacity of 1000 kg, s.s. rack - 5 shelves 3 side up and front side down material specification and construction standards as per ckd tender docket attached, platform trolley - 500 kg load bearing capacity the entire trolley is made of 16 swg. s.s. sheet on m.s. angle frame work, duly rust proof painted on heavy duty castor wheels of reputed make. the top to be stud wielded with the frame for stronger grip. also fitted with a push cart type handle & rubber cushion in front to avoid the damage during movement., platform trolley - 300 kg load bearing capacity. the entire trolley is made of 16 swg. s.s. sheet on m.s. angle frame work, duly rust proof painted on heavy duty castor wheels of reputed make. the top to be stud wielded with the frame for stronger grip. also fitted with a push cart type handle & rubber cushion in front to avoid the damage during movement., s.s. round bin with lid, s.s. square bin with lid, bain marie for sample food material specification and construction standards as per ckd tender docket attached, double jacketed steam cooker/kettle-heat source 600 ltr. capacity double jacketed steam cooker/kettle-heat source-direct injection boiler steam 3 bar @130 c,all ss 304 industrial grade single jackted open boiling steam cooker manufactured from food gradess 304 stainless steel 1.2 mm thickness of cover and conical bottom with 4mm thk ss 304 sheet completely tig welded.cooker will be tiltable by manual operated heavy duty gear box with ss 304 handwheel.accessories steam inlet rotary multipoint, unoin, starch drain valve.strainer ss 304 removable strainer steam inlet 25mm drain valve 50nb product outlet valve, cooker lid heavy duty lid with flip folding with rectangular ss tubes 2mm thk,built in stainer,, rice washer - 50 kg rice per cycle - of 5 - 7 minutes rice washer- model of rice washer. which by mere water pressure the rice is circulated from the wash tank to the cleaning head for a thorough wash.continous process of this function ensures that the product get cleaned well.cleaned rice is colected in perfocrated container and excess water is drained out., food collection trolley material specification and construction standards as per ckd tender docket attached, food transfer trolley material specification and construction standards as per ckd tender docket attached, food collection trolley material specification and construction standards as per ckd tender docket attached, food transfer trolley material specification and construction standards as per ckd tender docket attached, masala trolley material specification and construction standards as per ckd tender docket attached, ss single burner gas range top of 16 swg. s.s-304 sheet on m.s angle frame work duly rust proof painted on ss tubular/ square legs with adjustable nylon bullet feet for uneven floors. fitted with united/standard make heavy duty burner with pilot lamps with individual control valves and heavy duty cast iron pan support complete with accessories., gas operated-cook - woks 500 ltrs ss stove with auto ignite & sus 304 single layer bowl,lid & mixing arm with ss planetary head assembly, teflon mixing pads. concelead burner and variable speed, gas operated-cook - woks 400 ltrs ss stove with auto ignite & sus 304 single layer bowl,lid & mixing arm with ss planetary head assembly, teflon mixing pads. concelead burner and variable speed, single jacketed seam cooler 500 ltrs, tray stacking trolleymaterial specification and construction standards as per ckd tender docket attached, sev making machine, ss big kadai, ss big pateli, gas operated-co

Central Government/Public Sector

CTN :41281015

22 Sep, 2025 NA

Ahmedabad - Gujarat

Tender For supply of three way cock [part no: 62.05.3000.235 ]

Central Government/Public Sector

CTN :40665476

02 Aug, 2025 NA

Khurja - Uttar Pradesh

Tender For bid to ras supply of thermal insulation glass wool 50 mm, density- 24kg- sqm jali sand 22g aluminium sheet , acoustic insulation- 25 mm thick resin bonded glass wool covered with 30 swg aluminum perforated sheet, denisty- 48 kg-cum , differential pressure switch , vcd and nrd , intake louvers , ms grills with vcd , gi sheet 20g , gi sheet 22g , pot strainer sant , junction box , motorized fired damper , actuator for motorized fired damper belimo , gi cable tray 150 mm -perforated type , cprx , gi threaded rod 10mm 2 mtr length each , gi threaded rod 16mm 2 mtr length each , gi fastners 10mm , gi fastners 16 mm , ms angle 50x50x4 , nipple nptmale ss ferrul fitting , connector npt,ss male ferrule, both ends male type , ball valve , ms sheet for cowl 16g , wire mesh-size 25 sq mm gi wire mesh

corporations/Associations/Others

CTN :41194974

21 Aug, 2025 9.71 Lacs

Puruliya - West Bengal

Tender For tender for supply of nozzle for wetting head , complete set of fog jet nozzle tip with body for air washer , jetting nozzle with socketnozzle dia6 mmsocket25 mm bsw inside threaded mat of nozzle ss 316socket ms , ball valvegun metal class150 screwed end size 20 mm. , strainer basket type for wetting head of fae tower , 20 nb gm non return valve srewed end class150. , ball valvegun metalclass150 screwed endsize 15 mm. , jetting nozzle with socketnozzle dia6 mmsocket40 mm bsw of inside threadedmat of nozzle ss 316socket ms

corporations/Associations/Others

CTN :41251130

04 Aug, 2025 NA

Jaipur - Rajasthan

Tender For auction sale of 120kn porcelain disc insulators,160kn porcelain disc insulators,120kv long rod porcelain insulators,245kv ct,420kv ct,400kv la's,scrap bpi,dismantled old lights (mrecuary, sodium, halogen),misc scrap channels/angles/gate valves/y-strainer/bars/sheets etc,scrap conductor,gi scrap,ips tube,copper lead transformer bushing,battery container box , ms frames/pipes,oil tank,fire extinguisger,steel rope sling,empty sf6 cylinder-11kg,empty sf6 cylinder-26kg,empty sf6 cylinder-43kg,nitrogen cylinder-40kg,scrap 12v 26 ah battery,12v 160 ah battery bank,waste transformer oil (without drum),empty oil drums-209 l,power cables,control cables,scrap 400kv porcelain surge arrester,scrap-tower parts,scrap transformer empty oil ms drum,gi earth wire,isolator base channel/gi scrap,scrap wooden packing material(mt),scrap-ms iron,empty sf6 gas cylinder 29kg,empty sf6 gas cylinder 43kg,empty n2 gas cylinder,wood scrap,765kv glass type insulator (broken),split air conditioner (samsung, carrier make),400kv, 120kn disc porcelain insulator,opgw conductor (damaged),scrap oil without drum (compressor oil, engine oil etc),scrap power cable (aluminium),damaged polymer insulator 400kv, 160kn,scrap transformer oil (1 drum 150kg)

Central Government/Public Sector

CTN :40770421

07 Aug, 2025 NA

Rupnagar - Punjab

Tender For corrigendum : supply of supply of fan coil unit 3tr 1200 cfm , i t c of fan coil unit 3tr 1200 cfm , supply of ms c class pipe size 40 nb complete with fittings nut bolts flanges , i t c of ms c class pipe size 40 nb complete with fittings nut bolts flanges , supply of ms c class pipe size 25 nb complete with fittings nut bolts flanges , i t c of ms c class pipe size 25 nb complete with fittings nut bolts flanges , supply of gi b class drain piping with size 15 nb complete with u trap fittings , i t c of gi b class drain piping with size 15 nb complete with u trap fittings , supply of y strainer with ss filter element size 25 nb , i t c of y strainer with ss filter element size 25 nb , supply of thermostat for fcu fan on off control , i t c of thermostat for fcu fan on off control , supply of ball valve size 25 nb pn10 butt welded connections ss ball cs body , i t c of ball valve size 25 nb pn10 butt welded connections ss ball cs body , supply of ball valve size 40 nb pn10 butt welded connections ss ball cs body , i tc of ball valve size 40nb pn10 butt welded connections ss ball cs body , supply of ms supporting structure for piping , i t c of ms supporting structure for piping , supply of 18mm nitrile insulation class 0 aluminium faced sections sleeves for glycol and drain piping , i tc of 18mm nitrile insulation class 0 aluminium faced sections sleevss for glycol and drain piping

Three Way Cock Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors