Latest thrust plate Tenders | Government thrust plate Tenders

Central Government/Public Sector

CTN :45220395

26 May, 2026 NA

Bhopal - Madhya Pradesh

Tender For auction sale of pway scrap - scrap 60 kgs rail one meter long and below 06 meter qty.102 nos. 436.43 rm, 26.334 mts tms lot no bpl/bhs/n/p-way/scrap/60 kg /rail/2025-26/17 note: 1. buyer should visit the site before bidding. 2.mode of delivery by running meter wear and tear 1.49 % only. 3.it is strictly advice to the bidder to see the lot and loading point personally before bidding the lot in e-auction. no claim will be entertained after sale of the lot. 4. after joint lot inspection, if any addition, deletion, alteration & variation comes in the lot, stock holder will be fully responsible. 5.material other than description not to be delivered. 6. cutting may be allowed for easy loading.6, fish plate g/j if any attached with rail will not delivered and removed before delivery.

Central Government/Public Sector

CTN :45220397

26 May, 2026 NA

Bhopal - Madhya Pradesh

Tender For auction sale of pway scrap - scrap 60 kgs rail one meter long and below 06 meter qty.60 nos. 167.97 rm, 10.135 mts tms lot no bpl/bhs/n/p-way/scrap/60 kg /rail/2025-26/20 note: 1. buyer should visit the site before bidding. 2.mode of delivery by running meter wear and tear 1.48 % only. 3.it is strictly advice to the bidder to see the lot and loading point personally before bidding the lot in e-auction. no claim will be entertained after sale of the lot. 4. after joint lot inspection, if any addition, deletion, alteration & variation comes in the lot, stock holder will be fully responsible. 5.material other than description not to be delivered. 6. cutting may be allowed for easy loading.6, fish plate g/j if any attached with rail will not delivered and removed before delivery.

Central Government/Public Sector

CTN :45220399

26 May, 2026 NA

Bhopal - Madhya Pradesh

Tender For auction sale of pway scrap - scrap 52 kgs rail iii rd class above 01 mtrs above 1 meter long qty.144 nos. 1663.42 rm, 86.315 mts tms lot nobpl/brrg/2025-26-14 note: 1. buyer should visit the site before bidding. 2.mode of delivery by running meter wear and tear 2.00 % only. 3.it is strictly advice to the bidder to see the lot and loading point personally before bidding the lot in e-auction. no claim will be entertained after sale of the lot. 4. after joint lot inspection, if any addition, deletion, alteration & variation comes in the lot, stock holder will be fully responsible. 5.material other than description not to be delivered. 6. cutting may be allowed for easy loading. 6 fish plate g/j if any attached with rail will not delivere and removed before delivery.

Central Government/Public Sector

CTN :45220400

26 May, 2026 NA

Bhopal - Madhya Pradesh

Tender For auction sale of pway scrap - scrap 52 kgs rail above 1 meter long qty.84 nos. 1014.98 rm, 52.667 mts tms lot no. bpl/sfy/2025-26/10 note: 1. buyer should visit the site before bidding. 2.mode of delivery by running meter wear and tear 1.52 % only. 3.it is strictly advice to the bidder to see the lot and loading point personally before bidding the lot in e-auction. no claim will be entertained after sale of the lot. 4. after joint lot inspection, if any addition, deletion, alteration & variation comes in the lot, stock holder will be fully responsible. 5.material other than description not to be delivered. 6. cutting may be allowed for easy loading. 6 fish plate g/j if any attached with rail will not delivere and removed before delivery.

Central Government/Public Sector

CTN :45220401

26 May, 2026 NA

Bhopal - Madhya Pradesh

Tender For auction sale of pway scrap - scrap 52 kgs rail 1 meter long and above qty.42 nos. 246.52 rm, 12.792 mts tms lot no. bpl/bhs/n/p-way/scrap/52 kg rail 2025-26/22 note: 1. buyer should visit the site before bidding. 2.mode of delivery by running meter wear and tear 1.59 % only. 3.it is strictly advice to the bidder to see the lot and loading point personally before bidding the lot in e-auction. no claim will be entertained after sale of the lot. 4. after joint lot inspection, if any addition, deletion, alteration & variation comes in the lot, stock holder will be fully responsible. 5.material other than description not to be delivered. 6. cutting may be allowed for easy loading. 6 fish plate g/j if any attached with rail will not delivere and removed before delivery.

Central Government/Public Sector

CTN :45248666

10 Jun, 2026 NA

Bhopal - Madhya Pradesh

Tender For auction sale of pway scrap - scrap 60 kg rail 1 meter long and above below 06 meter qty. 50 nos. 188.04 rm, 11.346 mts tms lot no. bpl/bhs/n/p.w/scrap/60 kg / rail 2025-26/18 note: 1. buyer should visit the site before bidding. 2.mode of delivery by running meter wear and tear 1.49 % only. 3.it is strictly advice to the bidder to see the lot and loading point personally before bidding the lot in e-auction. no claim will be entertained after sale of the lot. 4. after joint lot inspection, if any addition, deletion, alteration & variation comes in the lot, stock holder will be fully responsible. 5.material other than description not to be delivered. 6. cutting may be allowed for easy loading.7. fish plate glued joint if found during the delivery time not be delivered and removed by stock holder.

Central Government/Public Sector

CTN :44846135

28 May, 2026 NA

Chatra - Jharkhand

Tender For corrigendum : tender for supply of spares for coal mills - segment assy bhel alstom hp 1203 , int liner leading bhel alstom hp 1203 , int liner trailing bhel alstom hp 1203 , scrpr wear plate 26112003375 and 60 bhel , torsion spring 26112003375 and 35 bhel , flow adjuster bhel alstom mill hp1203 , slot cover bhel alstom mill hp1203 , trunnion shaft hsg bhel alstom hp 1203 , trunnion shaft bhel alstom hp 1203 , vlv outlet liner bhel alstom millhp1203 , access door alstom bhel hp 1203 , jrnl hd lnr sprt 26102003437 00 and 5 bhel , journal head lnr 1 26102003437 00 and 10 , journal head lnr 2 26102003437 00 and 15 , journal head liner 3 26102003437 00 and 20 , jrnl hd lnr 4 26102003437 00 and 25 bhel , jrnl hd lnr 5 26102003437 00 and 30 bhel , jrnl hd lnr 6 26102003437 00 and 35 bhel , jrnl hd lnr 7 26102003437 00 and 40 bhel , jrnl hd lnr 8 26102003437 00 and 45 bhel , jrnl hd lnr 9 26102003437 00 and 50 bhel , jrnl hd lnr 10 26102003437 00 and 55 bhel , carbon fibre pckg 26112003376 00 and 20 bhel , defl lnr support plt 120 366 bhel

State Government

CTN :45146120

25 May, 2026 NA

Ranchi - Jharkhand

Tender For e-quotation for seeking firm rates for non-schedule items for preparing estimates. - 3 h.p. submersible set, providing all labour, tools, tackles and technicians for taking out 3 h.p. submersible pump set with column pipe from bore well, cost towards rewinding and repairing of 3 h.p submersible motor with s/f suitable winding wire, bronze bush etc. all complete after the deduction of cost of scrap materials., cost towards repairing of 3 h.p. submersible pump with s/f bronze impeller as per size and sample, bush, thrust plate, pump shaft etc. all complete after the deduction of cost of scrap materials., cost towards supplying fitting, changing 40 mm dia. upvc column pipe., cost towards supplying and fitting (1) 40 mm dia g.m. full way valve 1 no (2) 40 mm dia nr valve 1 no (3) 40 mm dia g.i. bend 2 nos. (4) 40 mm dia m.s. clamp with nut bolt 2 pair after the deduction of cost of scrap materials., transportation charge of above p/set from work site to work shop and vice versa including loading and unloading charge., supplying and installation suitable size panel board for 3 h.p. submersible pump including fixing on wall comparising of following points such as (1) d.o.l starter 1 no. (2) hrc fuse 3 no. (3) volt meter with selector witch -1 set (4) ammeter with selection switch 1 set (5) indicating neon lamp 3 no. etc. all complete., providing all labour, tools tackles and technicians for lowering of 3 h.p submersible pump set with all accessories in the bore well, 5 h.p. submersible set, providing all labour, tools, tackles and technicians for taking out 5 h.p. submersible pump set with column pipe from bore well ., cost towards for rewinding and repairing of 5 hp submersible motor with s/f 1.0 swg round copper winding wire 24 slot, gun metal bush, thrust plate, thrust bearing, diapharm, oil seal, etc with lathe work. all complete. after the deduction of cost of scrap materials., cost towards repairing of 5 hp submersible pump with s/f noryl impeller as per size and sample, diffuser, s.s. shaft, s.s. coupling, s.s. sleeve, nut, c.i nrv etc. all complete after the deduction of cost of scrap materials., cost towards supplying fitting, changing 50 mm dia. upvc column pipe., supplying and installation suitable size panel board for 5 h.p. submersible pump including fixing on wall comparising of following points such as (1) d.o.l starter 1 no. (2) hrc fuse 3 no. (3) volt meter with selector witch -1 set (4) ammeter with selection switch 1 set (5) indicating neon lamp 3 no. etc. all complete., transportation charge of above p/set from work site to work shop and vice versa including loading and unloading charge., providing all labour, tools tackles and technicians for lowering of 5 h.p. submersible pump set with all accessories in the bore well, 7.5 h.p. submersible set -, providing all labour, tools, tackles and technicians for taking out 7.5 h.p. submersible pump set with column pipe from bore well ., cost towards for rewinding and repairing of 7.5 hp submersible motor with s/f 1.0 swg round copper winding wire 24 slot, gun metal bush, thrust plate, thrust bearing, diapharm, oil seal, etc with lathe work. all complete. after the deduction of cost of scrap materials., cost towards repairing of 7.5 hp submersible pump with s/f noryl impeller as per size and sample, diffuser, s.s. shaft, s.s. coupling, s.s. sleeve, nut, c.i nrv etc. all complete after the deduction of cost of scrap materials., providing all labour, tools tackles and technicians for lowering of 7.5 h.p. submersible pump set with all accessories in the bore well, transportation charge of above p/set from work site to work shop and vice versa including loading and unloading charge., provision for leakage repairing of different size of upvc sch- 80 pipe in place of existing / cracked and damaged pipe of isi approved make or equivalent make damaged pipe in trenches and replacement of pipe and fitting so as to give 1 m average cover over the socket of pipes with disposal of exc

CTN :45068617

03 Jun, 2026 1.52 Lacs

Guna - Madhya Pradesh

Tender For supply of handpump majour spare parts under ww np guna - supply spares and majour part for hand pumpl under ww np guna, ukbfv yoklj, ysnjoklj, kseoklj, jcjfjax, jcjokljcm, jcjokljnksv, vijokyovlsecyh, yksojokyovlsecyh, psdokyoxkbzmfjvsujlfgr, vijokyodaiyhv, iyatj ;ksxckm+, qkyksoj, lis kj, yksojuv c.i.reducer cup , jcj khvfjvsujczkl dh, czklyk;ujgsohm;wvh 350 ls 400 xzkeotuesa, eklvjqhl, ,e-,l- jkwmlkdsv, csfjax6204 ,u-ch-lh-,l-ds-,q, ,dly ,l-,l- , psufcfkdiyjvkbz-,e- iind, psuuvoksyv, hexagonal nut bolt, g.i. socket i.s.i. medium 32 mm, head cover, thrust plate of pedestra, supply of hand pump set india mark iind isi complete with c.i.cylinder and 10 nos m.s. roads, m.s. road 12mmdia x 3mtr long fully galvinised, pedestral only h/d, water chamber only h/d, head assembly complete with handle and chain bearing, c.i.cylinder assembly with master piece, brass cylinder h/d, handle only h/d, handle only heavy duty long

CTN :45243141

09 Jun, 2026 12.78 Lacs

Murshidabad - West Bengal

Tender For procurement of different spares related to bottom ash clinker crusher and bottom ash system for overhauling of unit 2 scheduled in july august 2026.sgtpp - procurement of different spares related to bottom ash clinker crusher and bottom ash system for overhauling of unit 2 scheduled in july august 2026.sgtpp, cam segment for clinker crusher for bottom ash crusher dcips drawing no-25p06-t-1b-582,material-durite,bhn:500, shaft with shaft struct & shaft sleeve for bottom ash crusher dcips moc-en24 & ss 410,drawing no 25p06-t-1b-582, wear plate front for clinker crusher for bottom ash crusher dcips drawing no-25p06-t-1b-582,material-durite,bhn:500, wear plate back for clinker crusher for bottom ash crusher dcips drawing no-25p06-t-1b-582,material-durite,bhn:500, wear plate side for clinker crusher for bottom ash crusher dcips drawing no-25p06-t-1b-582,material-durite,bhn:500, gland for packing for bottom ash crusher dcips moc-ci fg-260 is:210,drawing no 25p06-t-1b-582, packing gland follower for bottom ash crusher dcips moc-bronze ltb 2,is:318,drawing no 25p06-t-1b-582, packing gland flange for bottom ash crusher dcips moc-ms,is:2062 gr-a,drawing no 25p06-t-1b-582, lantern ring for bottom ash crusher dcips moc:brass ltb-2,is318,as per dcips drawing no 25p06-1b-t-722, labyrinth ring of bearing housing moc-ms is 2062,for ahp-ifor clinker grinder,make-dcips, cam bolt for exen crusher for bottom ash crusher size: m20 x 65 long,sq.head,thread length 34 mm with nut,lock nut & spring washer.m.o.c: en8, chain simplex for bottom ash crusher dcips drawing no 25p06-t-1b-582, sprocket drive and driven for bottom ash crusher dcips drg.no.28p03-1b-t-582(rev-2), feed sump for bottom ash clinker crusher for bottom ash crusher dcips as per dcips drawing no 25p06-1b-t-722, nozzle tip with ceramic insert # 2,13 dcips for jet propulsion pump,part no-2&13,as per dcips drawing n0.-25p06-1b-t-591# for jet propulsion pump,as per dcips drawing n0.-2 5p06-1b-t-591 sgtpp1, nozzle inlet for jet pump for jet pump sgtpp dcips moc: fg,is 210,as per dcips dwg no 25p06-t-1b-591, throat cum disch pipe of jet pump for jet pump sgtpp dcips moc: durite(bhn 500-550),as per dcips dwg no 25p06-t-1b-591, punched washer type a for jet pump,moc:ss410/416,as per dcips punched washer (type dcips punched washer (type a) for m 20 bolts is 2016 of of jet pulsion pump,as per drawing,part no-05,material: steel, guide angle lh for ba feed gate for ba feed gate dcips moc-ms is:2062 gr a,drawing no 25p06-1b-t-572, guide angle rh for ba feed gate for ba feed gate dcips moc-ms is:2062 gr a,drawing no 25p06-1b-t-572, gate roler fitted with bush for ba feed gate dcips drawing no-25p06-t-1b-572,material-steel-is:1030, renewable seat lip for ba feed gate for ba feed gate dcips moc-ms is:2062 with ss316 lip,drawing no 25p06-1b-t-572, adjustable seating wedge # for bottom ash feed gate assembly as per drawing no.28p03-1b-t-576(rev-2), enclosure cover plate # dcips for bottom ash hopper feed gate enclosure, moc:ms,is:2062,10mm thk,as per dcips drawing no 25p06-t-1b-572, gasket,for ba feed gate access door for bottom ash moc: neoprene rubber , dcips drg no: 25p06-1b-t-572, gasket for feed gate enclosure for ba feed ga moc: neoprene rubber, elbow,200nb x45 for wet ash system sgtpp dcips moc: durite (alloy c.i),bhn:450-500,as per dcips dwg no 25p06-1b-t-831, elbow,200nb x90 for wet ash system sgtpp moc: durite (alloy c.i) bhn:450-500.as per dcips dwg no 25p06-1b-t-835, lateral,200nbx45 p/p/p for wet ash system sgtpp ba slurry line.moc: durite(alloy c.i) bhn: 450-500, guide angle bracket for ba feed gate for ba feed gate dcips moc-ci fg-220 is:210,drawing no 25p06-1b-t-572

Thrust Plate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors