Latest thrust washer Tenders | Government thrust washer Tenders

State Government

CTN :45275642

02 Jun, 2026 3.07 Lacs

Serampore - West Bengal

Tender For repairing and overhauling of one no twin lobe air blower assembly and renovation of 2 nos outgoing motor (blower ) feeder of lt pdb with supply, fitting and fixing spares at sludge pump house under swtp, kmda. - supply,installation,testing and commisioning of following items for hoisting system/ blower and gear box as mentioned below as per direction including cost of materials, machinaries , manpower, cutting,machining,aligning,anchoring,welding,finishing,consumables, carriage and all overheads with all leads and lifts complete as per specification (without painting), i) base frame (ms), ii) shaft/pin with key ways made of ss-304, iii) gear& pinion (forged steel), supply and fixing the 3way c.i v grooved pulley with complete mechanism key way suitable to en-24, 60 mm dia/ as per sample of shaft end., a) motor driving, b) blower driving, supply of gear oil as per direction of engineer in charge., supply of grease, supply and delivery of the following bearing (make: skf):, i) 22312e/c3/ as per sample. (for blower), supply and fixing of tough v belts (make: fenner/power boom / v guard/benq/ecodrive) of the following size c 98/ as per sample., supply fitting fixing of ss (aisi304) bolts,nut & washer i) dia 10 mm to 20 mm a) length upto 75 mm, refixing of impeller of blower after dynamic balancing in workshop as per is rule after dismantling the same., dismantling the 25/30 h.p (18.5 kw)//30 h.p squirrel cage motor from its foundation by opening mounting bolts and disconnection of cables from terminal box and open the v belts for repairing purpose (in condition), preliminary checking of the whole motor (lt sq. cage im) and testing of i.r. value, load currents, leakage factor of stator & rotor, terminal lead joints of stator connection ends, insulation of glass fibre terminal bar, double cage rotor end rings and all of motor bars and bar joints, housing of d.e. & nde shield bearing housing etc. before work to detect fault., complete servicing and heat varnishing of 415volt, 3 phase l.t. sq. cage induction motor after cleaning the stator and heating it up periodically and varnishing by dr. beck s graded insulating varnish to obtain stable ir value, cleaning up the rotor, including heating for demoisturisation, lacker coating on the surface of rotor stampings, cleaning and ro priming on the end shield covers, bearing housing and complete the necessary repairing works as per direction of e.i.c.upto 75kw lt sq. cage im ], re fixing the 25/30h.p star/delta squirrel cage motor over its foundation by mean of mounting bolts & nuts, washer complete connection of existing led of cable at the terminal box and wear the v belts with proper alignment in respect to i.d. fan (12000 cu m/hr capacity)/ blower by adjusting the side rail for smooth running., finishing the end of terminal leads by s & f dowells copper sockets properly supplying tapes, petrollium jelly etc. 6 nos.upto 75kw lt sq. cage im., cost of mechanical work viz. shaft truness, checking key way looping of holes grinding and polishing etc. upto 75kw lt sq. cage im., inspection checking/testing and servicing of the existing starter panel, all terminal connection, contactors, relays etc as per desired technical specification including man and minor materials for proper functioning as per direction of eic., supply and fixing of 240/230 volt, 50 hz, t.p., power contactor (make: l & /abb/schneider/ simence/ ge) having contact block of the following range.32-55amp, supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) blue/ white color., supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) other than blue/ white color., supply and delivery of thermal overload relays (make: l & t/abb/schneider/simence/ ge/minilec) of the following range:a) 0.2-0.33/ 0.3-0,5/ 0.45-0.75, mn2, supply of ammeter selector switch current in each phase with off, 4 pos. 90 angle ofthrow (off-r-y-b) , supply and fixing of analog ammeter ranging

State Government

CTN :45290539

08 Jun, 2026 NA

Bhopal - Madhya Pradesh

Tender For hand pump spares parts isi mark and conforming to is 15500 2021 (part 1 to 8) (with up to date amendment) - prevailing torque type steel hexagonal nutm10x1.5 is:7002, ball bearing 20 bc02pp is:6455, bolts for cover m 12x20 is:1363, washer for axle to suit m-12 is:2062, high tensile bolt m-10x40mm is:1364 part-i, hexagonal bolt m12x1.75x40 is:1363 part-i, hexagonal nut m12x1.75 is:1364 part-3, hexagonal coupler m12x1.75x50 is:15500 part-4, long bolt m12x1.75x20 for extra deep well is:1363 part-i, reducer cap painted for mark ii & extra deep well hand pump i.s.i. mark - 0.880 kgs approx., cylinder body with brass liner for deep well pump isi mark. - 2.50kgs approx., cylinder body with brass liner for extra deep well and vlom pump isi mark. - 3.20 kgs approx., plunger yoke body for all types of pumps i.s.i. mark. -0.260 kgs approx., spacer for nitrile rubber pump bucket for all types of pumps i.s.i. mark.-0.210kgsapprox., follower for mark-ii deep well i.s.i.mark.- 0.280kgs approx., follower for extra deep pump i.s.i.mark.- 0.370kgs approx., check valve seat for mark ii & extra deep well i.s.i. mark.- 0.210 kgs approx., check valve for mark ii & extra deep well i.s.i. mark, rubber seat retainer for mark ii & extra deep well 0.080 kgs approx., lowerspacerforextradeepi.s.i.mark.-0.200kgs approx., chain with coupling for all types of pumps i.s.i. mark.-0.550kgsapprox., front cover hot dip galvanized for all types of pumps i.s.i. mark.-1.230 kgs approx., bearing spacer for axle for all types of pumps i.s.i. mark, third plate galvanized for all types of pump i.s.i. mark. -1.400kgs approx., connecting rod for all types of pumps i.s.i.mark.-2.7kgsapprox., washer electro - galvanized i.s.i. mark, stand galvanized normal isi mark ii & vlom i.s.i. mark.-17.900 kgs approx., stand galvanized telescopic for marks & vlom i.s.i. mark.-19.750 kgs approx., stand galvanized normal for extra deep well i.s.i. mark.-18.700 kgs approx., stand galvanized telescopic for extra deep well i.s.i.mark.-20.500kgsapprox., handle comprising handle bar, bearing housing & chain guide for mark ii & vlom i.s.i. mark, handle comprising handle bar, bearing housing & chain guide for extra deep i.s.i. mark, t bar for extra deep well i.s.i. mark, counter weight for extra deep i.s.i. mark. -12.00 kgs approx., water tank complete for mark ii deep well & extra deep well hand pump i.s.i. mark. - 7.80 kgs approx., head complete for mark ii & vlom i.s.i. mark.-10.220 kgs approx., head complete for extra deep well i.s.i. mark.-10.150 kgs approx., s.s. handle axle for all types of pumps i.s.i. mark.-0.350 kgs approx., s.splungerrodformarkiii.s.i.mark.-0.430kgs approx., s.s. plunger rod for vlom & extra deep well i.s.i. mark.- 0.470 kgs approx., rubber seating for upper valve for all types of pumps i.s.i. mark, pump bucket of nitrile rubber for all types of pumps i.s.i. mark, rubber seating for lower valve for mark ii & extra deep i.s.i. mark, sealing ring for mark-ii & extra deep well i.s.i. mark, head assembly complete with handle assembly, for mark ii & vlom isi mark., head assembly complete with handle assembly for extra deep isi mark, handle assembly complete for mark ii deep well & vlom pumps isi mark.-10.250 kgs approx., handle assembly complete for extra deep well hand pump isi mark. -15.350kgsapprox., cylinder assembly complete for mark ii deep well hand pumps isi mark.-6.10kgs approx., cylinder assembly complete for extra deep hand pump isi mark.-7.00kgsapprox., plunger valve assembly suitable for nitrile bucket comprising of plunger yoke body, upper valve, spacer follower pump bucket & upper value seating for mark ii deep well hand pump consisting of isi mark spares., plunger valve assembly suitable for nitrile bucket comprising of plunger yoke body, upper valve both spacers, follower pump bucket & upper value seating for extra deep well hand pump consisting of isi mark spares., check valve assemb

Central Government/Public Sector

CTN :45318154

15 Jun, 2026 NA

East Singhbhum - Jharkhand

Tender For supply of cap oil filter, part no.-24063099 for repairing of engine, model- tad851ve, make-velvo penta suitable to similar esn-3008602532 and 3008602529 fitted along with lhd 907, make-eimco elecon , o ring kit part no-24063050 for repairing of engine, model- tad851ve, make-velvo penta suitable to similar esn-3008602532 and 3008602529 fitted along with lhd 907, make-eimco elecon , miscellaneous repair kit, part no. ref-54162789 for repairing of engine, model-tad851ve,make-velvo penta suitable to similar esn- 3008602532 and 3008602529 fitted along with lhd 907, make-eimco elecon , turbocharger part no-23099979, for repairing of engine, model- tad851ve, make-velvo penta suitable to similar esn-3008602532 and 3008602529 fitted along with lhd 907, make-eimco elecon , thermostat part no-21746213, for repairing of engine, model- tad851ve, make-velvo penta suitable to similar esn-3008602532 and 3008602529 fitted along with lhd 907, make-eimco elecon , o-ring part no-990821, for repairing of engine, model- tad851ve, make-velvo penta suitable to similar esn- 3008602532 and 3008602529 fitted along with lhd 907, make-eimco elecon , thrust washer kit, std-a part no- 21908099, for repairing of engine, model- tad851ve, make- velvo penta suitable to similar esn-3008602532 and 3008602529 fitted along with lhd 907, make-eimco elecon , thrust washer kit, std-b part no-21908101, for repairing of engine, model- tad851ve, make-velvo penta suitable to similar esn-3008602532 and 3008602529 fitted along with lhd 907, make-eimco elecon , thrust washer kit, os- 0.15mm part no-21939708,for repairing of engine, model- tad851ve, make-velvo penta suitable to similar esn- 3008602532 and 3008602529 fitted along with lhd 907, make-eimco elecon , piston ring kit part no-22222394, for repairing of engine, model- tad851ve, make-velvo penta suitable to similar esn-3008602532 and 3008602529 fitted along with lhd 907, make-eimco elecon , main bearing kit part no-22627432, for repairing of engine, model- tad851ve, make-velvo penta suitable to similar esn- 3008602532 and 3008602529 fitted along with lhd 907, make-eimco elecon , big end bearing kit, std part no- 21908108, for repairing of engine, model- tad851ve, make- velvo penta suitable to similar esn-3008602532 and 3008602529 fitted along with lhd 907, make-eimco elecon , big end bearing kit, os-0.25 part no-23574169, for repairing of engine, model- tad851ve, make-velvo penta suitable to similar esn-3008602532 and 3008602529 fitted along with lhd 907, make-eimco elecon , cylinder head gasket part no-22722746, for repairing of engine, model- tad851ve, make-velvo penta suitable to similar esn- 3008602532 and 3008602529 fitted along with lhd 907, make-eimco elecon , level sensor coolant part no- 21951003, for repairing of engine, model- tad851ve, make- velvo penta suitable to similar esn-3008602532 and 3008602529 fitted along with lhd 907, make-eimco elecon //bid details 2 / 22

Central Government/Public Sector

CTN :45303250

02 Jun, 2026 NA

Varanasi - Uttar Pradesh

Tender For tender for supply of washers lock with lug - washers , lock with lug , steel 10.5 (for rb-089.t) -- as per specn. aa7169003 rev.00 , scru cap soc p-12.9 m20x160 (for rb-089.t) -- as per specn. aa7123123 rev.07 , hex bolt cl.8.8 m8x60 (hw-279.97) -- as per std. aa7111122 rev.08 , hex bolt cl.8.8 m8x85 (hw-286.79) -- as per std. aa7111122 rev.08 , screw cap soc. hd. m20 x 80 - cl.12.9 (hw-286.89) -- as per specn. aa7123123 rev.07 , soc. hd cap screw m10 x 20 - cl.8.8 (hw-286.75) -- as per specn. hw7123196 rev.01 , hex nut cl.8.8 m20x1.5 (hw-165.27.55) -- as per specn. aa7151210 rev.08 , soc. hd. cap sc. cl.8.8 m10x20(hw-187.108) -- as per specn. aa7123125 rev.05 , pin taper 5x28 (hw-298.34) -- as per drg. 4-11427-01107 rev.00 with matl. specn. aa7171041 , pin taper -st 3x40 (hw-356.95)-- as per specn. aa7171041 rev.07 , scru hex a -8.8 m8x45 (hw-354.03) -- fully m/cd item as per specn. aa7121123 rev.08 , lock washer with lug 8.4 (hw-288.32) -- as per is-5554 , scru cap soc p-12.9 m20x100 (hw-165.27.9.a) -- item as per specn aa7123123 rev.07 , hex screw m8x35 cl. 8.8 -- as per specn. aa7121123 rev.08 , scru hex a- 8.8 m8x60 (hw-396.17) -- item as per specn. aa7121123 rev.08 , soc. hd. cap sc. thin hd cl.8.8 m20x60 (hw-187.175) -- as per specn. aa7123125 , soc.hd.cap screw cl 12.9 m20 x 140 as per specn. aa7123123 , machined washer m16 (hw-187.61) -- as per specn. aa7161001 rev.04 , pin taper 4x26 (hw-285.45) -- item as per drg. 41140202209 rev.00 & spec. aa7171041 rev.07 , scru cap soc th hd a-8.8 m8x16 (hw-187.29) -- as per specn. aa7123125 rev.05

corporations/Associations/Others

CTN :45303117

08 Jun, 2026 3.51 Lacs

Aligarh - Uttar Pradesh

Tender For tender for supply of acid unloading pump spares - e acid unloading pump (h2so4) with mechanical seal (with base plate) , model no.cpc 40/200 , pump shaft , part no 22.3 , moc aisi 410 for model no. cpc 40/200 , size65x40 , shaft sleeve/53.5 moc-aisi410 , for model no. cpc 40/200 , size65x40 , volute casing , part no.-11.4 , mpc is 210 fg 260 , model no. cpc 40/200 , size65x40 , casing cover17.3 for acid unloading pump (h2so4) moc is 210 fg 260 , model no. cpc 40/200 , impeller /24.2 mpc is 210 fg260.model no. cpc 40/200 , size65x40 , capacity15m3/hr , flat gasket (washer) / 41.03 moc teflon for model no. cpc 40/200 , size65x40 , capacity15m3/hr , flat gasket (washer) /41.04 moc teflon for model no. cpc 40/200 , size65x40 , capacity15m3/hr , key (coupling) / 95.2 , moc bs 970 en 8 , for model no.- cpc 40/200 , size65x40 , capacity15m3/hr , impeller nut - 93.4 moc aisi-316 for model no. cpc 40/200 , size-65x40 , capacity15m3/hr , helicoil insert/94.21moc stainless steel for model no. - cpc 40/200 , size-65x40 , capacity-15m3/hr , wear ring (casing) - 51.4 moc 210 fg 260 for model no. - cpc 40/200 , stud casing 91.4 pump type - cpc 40/200 , deflector/51.9 moc ais304 pump type - cpc 40/200 , size-65x40 , capacity-15m3/hr , total head - 10m , speed -1415 rpm , circlip 94.23 moc spring steel for model no. - cpc 40/200 , size-65x40 , capacity-15m3/hr , coupling set (l 100) material is 210 fg 260 for model no. - cpc 40/200 , key( impeller)95.03 model no. - cpc 40/200 , mechanical seal assembly set make leak proof for model no. - cpc 40/200 , constant level oiler / 64.1 model no. - cpc 40/200 , hex cap screw moc ts 1363 ms for mode no. - cpc 40/200 , oil seal moc -synthetic rubber for mode no. - cpc 40/200

corporations/Associations/Others

CTN :45046708

13 Jun, 2026 5.54 Crore

Multi City - Karnataka

Tender For corrigendum : supply of air suspension parts to the divisions of the nwkrtc. - nw-26-washer 22 mm - shock absorber , nw-26-washer 18 mm - shock absorber , nw-26-volvov air bellows, nw-26-volvo shock absorber-4, nw-26-volvo shock absorber-3, nw-26-volvo shock absorber-2, nw-26-volvo shock absorber-1, nw-26-volvo rubber bushing (shock absorber rubber bush), nw-26-volvo mounting plate air spring upper, nw-26-volvo gas spring side hatch 700n, nw-26-volvo bump stop, nw-26-volvo bellows-3, nw-26-volvo bellows-2, nw-26-volvo bellows-1, nw-26-volvo air spring (front bellow assy), nw-26-volvo air spring, nw-26-volvo air bellows-2, nw-26-volvo air bellows-1, nw-26-ud special nut bolt - engine, nw-26-ud rubber bushing, nw-26-ud bush - rear reaction top rod (75mm bush), nw-26-ud rear reaction rod top (rear v stay), nw-26-ud bush (v bar 85mm bush) - rear reaction rod , nw-26-ud rear reaction rod, nw-26-ud rubber spring - rear anti-roll bar , nw-26-ud reaction rod (front v stay), nw-26-ud reaction rod, nw-26-ud link rod - front (u bar), nw-26-ud front shock absorber assy, nw-26-ud bush (66mm) - front reaction rod , nw-26-ud front reaction rod, nw-26-ud front link rod, nw-26-ud bushing - front anti roll bar, nw-26-ud front and rear shock absorber, nw-26-ud ecas distance sensor, nw-26-ud connecting pin, nw-26-ud clamp (hanging bush), nw-26-ud bumper block, nw-26-ud altitude valve control rod assembly-3, nw-26-ud altitude valve control rod assembly-2, nw-26-ud altitude valve control rod assembly-1, nw-26-ud air spring (bellow) rear, nw-26-ud air spring (bellow) front, nw-26-tata/ley taper pivot bolt , nw-26-tata/ley connecting rod , nw-26-tata spherilastic bush taper lpo 1616, nw-26-tata bs6 shock absorber front, nw-26-tata bs6 bush/cut bush set - rear anti roll bar, nw-26-tata bs6 bush - rear anti roll bar , nw-26-tata bs6 bush - front anti roll bar, nw-26-taper sleeve, nw-26-steel piston 12 inch - single hole, nw-26-steel piston 12 inch - double hole, nw-26-spring washer - m16 , nw-26-split pin 3/16 x 2 1/2, nw-26-ley slf shock absorber-2, nw-26-rubber washer - bump stop, nw-26-rubber connector assly, nw-26-rubber bush - shock absorber , nw-26-rear axle sub compound link tc, nw-26-nylon tube - 8mm , nw-26-nylon tube - 6mm , nw-26-nylock nut - m16x2 , nw-26-nylock nut, nw-26-male elbow m12x1.5mm, nw-26-male connector, nw-26-machined washers - m24 , nw-26-machined washers , nw-26-machined washer ms - m16 , nw-26-m.bolero rear shock absorber, nw-26-m.bolero front shock absorber, nw-26-ley bs4 support bracket lh , nw-26-ley bs4 spherilastic bush, nw-26-ley slf u bolt m24x1.5x378mm, nw-26-ley slf suspension bolt (special bolt half threaded), nw-26-ley slf suspension bolt, nw-26-ley slf spigot , nw-26-ley slf spherilatic bush with pin , nw-26-ley slf shock absorber-1, nw-26-ley slf nyloc nut - m24x1.5 , nw-26-ley slf nut - suspention bolt, nw-26-ley slf anti roll cut bush rear , nw-26-ley slf alien bolt - m16x2x130mm, nw-26-ley bs4 shock absorber front 6.5t, nw-26-ley bs4 shock absorber, nw-26-ley midi bs4 stablizer holder asm, nw-26-ley midi bs4 bush - rubber-2, nw-26-ley midi bs4 bush - rubber-1, nw-26-ley midi bs4 rear shock absorber assy, nw-26-ley midi bs4 pull rod assy with bush , nw-26-ley midi bs4 front shock absorber assy, nw-26-ley midi bs4 bracket - suspension holder, nw-26-ley bs4 front shock absorber, nw-26-ley bs4 dowtee washer m26, nw-26-ley bs4 coller bush, nw-26-ley bs6 solenoid ptfc24v, nw-26-ley bs6 rear shockabsorber plate, nw-26-ley bs6 pallakki bellow air spring, nw-26-ley bs6 front shock absorber bottom-2, nw-26-ley bs6 front shock absorber bottom-1, nw-26-ley bs4 rubber pad assly, nw-26-ley bs4 retaining plate, nw-26-ley bs4 rear rubber air bellow 12 inch, nw-26-ley bs4 m16 spring washer , nw-26-ley bs4 levelling valve repair kit, nw-26-ley bs4 levelling valve assy , nw-26-ley bs4 air leveling valve lever, nw-26-ley bs4 air spring assly , nw-26-tata bs3 hex nut - m16x2, nw-26-tata bs3 hex bolt with nut -m16x2x100, nw-26-tat

State Government

CTN :45273799

30 May, 2026 NA

Idukki - Kerala

Tender For supply of electrical and wiring accessories 50 sqmm 4 core al armoured ug cable- isi , 10 sqmm 4 core al armoured ug cable- isi , 4 way vertical tpn double door db , 6 way tpn double door db , 20 mm pvc wiring pipe - isi medium , 20 mm pvc wiring couple - isi medium , 20 mm pvc 1 way junction box - isi medium , 20 mm pvc 2 way junction box- isi medium , 20 mm pvc 3 way junction box- isi medium , 25 mm pvc wiring pipe- isi medium , 25 mm pvc wiring couple- isi medium , 25 mm pvc 1 way junction box- isi medium , 25 mm pvc 2 way junction box- isi medium , 25 mm pvc 3 way junction box- isi medium , 20 mm pvc bend- isi medium , 25 mm pvc bend- isi medium , cable tie 300 mm , cable tie 450 mm , cable gland for 50 sqmm 4core cable , cable gland for 10 sqmm 4core cable , 4 mm2 electrical wire ( red, yellow, blue, black) , 2.5 mm2 electrical wire( red-2, yellow-2, blue-2, black-2, green 1) , 1.5 mm2 electrical wire (red-2, yellow-2, blue-2, black-1) , ceiling rose isi , combined power box with switch socket (6a & 16 amp)isi , 16a single way modular switch , 6a single way modular switch , 6a modular switch , 4 module surface box with modular plate , 6 module surface box with modular plate , 3 module surface box with modular plate , 63 amps 4 pole isolator , 63 amps 4 pole rccb - 100 mamps , 40 amps 4 pole rccb - 100 mamps , 40 amps 3 pole mcb , 20 amps 3 pole mcb , 20 amps 4 pole mcb , 16 amps 4 pole mcb , 16 amps simple pole mcb , 6 amps simple pole mcb , single door 4 pole mcb box isi , 10 mm2 copper wire , earth pipe 14.2 mm c.b 3 feet , earth chamber pit , earthing compound 8kg , 40mm stainless steel pipe saddle , 32mm stainless steel pipe saddle , 25mm stainless steel pipe saddle , 75mm stainless steel pipe saddle , 6*19 drywall screw , 6*25 drywall screw , 6*38 drywall screw , 6*50 drywall screw , 50mm bolted type socket al , 50mm banana socket al , 25mm banana socket al , 10mm banana socket al , sintex junction box - isi , 32a 4 way terminal strip connector , 1.5 sqmm 3 core wire , 30 watt led flood light isi , 36 watt led street light isi , 2 inch 16gauge street light pole 4 mtr , 1.1/4 inch 16guage pipe , 4 inch steel clamp , 6*50mm nut bolt and washer , insulation tape (red-20, yellow-20, blue-20, black-20, green-20) , mcb dummy , cable root marker (cast iron ) , 3 inch dwc pipe isi , 2 inch dwc pipe isi

State Government

CTN :45304509

18 Jun, 2026 28.00 Lacs

Alappuzha - Kerala

Tender For purchase of 4cti engine spares - 4cti engine spares, interference fit liner-w f9k00122, interference fit liner-x f9k00222, interference fit liner-y f9k00322, interference fit liner-z f9k00422, cylinder head fcn04822, valve seat exhaust x0900116, valve seat intake x0900216, valve seat kit p3118951, valve bush- bushing valve guide intake f0531522, ball steel f4832510, stud-exhaust manifold x3504211, cylinder head cover f1135842(b8254309), oil filler cup f1100160, cylinder head cover gasket f1762100, gasket-cylinder head fct00800, valve guide kit p0991151, thrust washer std p0990951, crank shaft main bearing std p0928851, ring set p0982751, piston set p0982651, con rod bearing kit -std p5104212, bushing con rod f0537930, bolt con rod f3585615(p8100335), twin groove add on pully fc803422, starting ring f0741822, crank shaft rear end oil seal x2705100, o ring-81.2*3.3 f2744200, front and oil seal fe802900, composite valve kit p0951051, valve stem seal x2706400, exhaust manifold x1813022, gasket -emd fff00213, hex nut flunged m10* 1.25 f7f00115, stud m8*1,25-43mm long x3714015, throttle and gear operating unit(twin engine type), mac n hom steering unit, mac n hom actuvator, inter cooler, knr pump, oil pressure sensor fmk00200, temperature sensor x2009400, gear oil pressure guage, rubber packing 3mm, graphite packing 3mm, alied packing 3 mm, diesel filter fhj00700, air filter element(primary and secondary), coolant-72 litre(24can-1 can-3 litre), rubber hose id 1 1/4" marine hose, rubber hose id 1.5" marine hose, rubber hose id 2" marine hose, rubber hose id 3" marine marine flame resistant, glass doom and o ring, bend rubber hose, sea chest brass gate valve 2 inch, non return 1 3/4 inch, coupling bolts5/8* 4, inter cooler, gear cooler, oil cooler 6 plate fp405700, filter element oil(micro flow) p31015410, breether hose with inner spring b7015701, h4 injector hp pipes kit b5h07209(b5h03404), pipe oil b7007801, lube oil feed pipe for fuel injection pump b9723006, s/a injector leak of pipe b9221205, injector for 135 lt bs3 engine f8x00210, gasket nozzle holder f1761300, coolant pump assy (fwp) b8760406, turbo charger a4k09900-alesc43-a, belt 8 pk1250(fenner) x0301650, v belt f0330950(x0300450), pipe-heat exchange to cac-in frr00135, hose assy-feed pump to fuel filter b3j00502, expansion bellow-exhaust 4 hole type f3l02014, banjo bolt m12*1.5 f2804611, banjo bolt m14*1.5 f2804711, heat exchanger f3953600, cable- accelerator remote control f0l01000, charge air cooler marine engine faf07600, pipe-turbo to cac frr42615, adaptor to he connection fot27911, hose f1974150, hosestraight 26 id marine app x0w24658, pipe-he to cac in frr00135, hose f1925250(f8p13358), hose straight x0w23258, hose clamp f0819210, pipe sw out to he in frr39915, pipe f8632610, bracket heat exchanger xjw00714, hose b3j00501, pipe he out to cac in marine frr40215, bracket heat exchanger xjw00414, hose clamp x3901010, pipe radiator fresh water outlet ft723014, pipe radiator to engine air intake ft723414, low oil pressure switch with sensor fmk00200, hose single bend l bow fx216158, silencer f3950614, l-hose f1970750, straight hose for radiator pipe line f1971550

CTN :44959371

10 Jun, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : tender for supply of vibration damper set (motor side) , driving plate , schredder valve , gas equalising valve , protecting cap , spring washer , flange , gasket , gasket , spring washer , retaining ring , pressure ring , spring washer , oil pressure relief valve , connecting flange , vibration damper set , joint ring , gasket , hexagon head screw , hexagon head screw , hexagon head screw , washer , washer , spring washer , vibration damper set (motor side) , hexagon head screw , ref compressor oil bse 170 (10ltr) , cabel connector , bottom plate , thrust washer , shaft seal , hexagon head screw , hexagon nut , washer , give - head key for stator , set screw , thrust coller , spacer sleeve , fixing plate , mounting (crank case side) , gasket , head socket cheese head screw , sealing screw , piston pin , gasket , gasket , pressure relief valve , sealing screw , magnetic screw , gasket , protecting cap , washer , bearing bush (motor side) , thrust washer (motor side) , mounting (motor side) , gas equalising valve , shut off valve , oil filter , pipe connection , sealing plug , o ring , gasket , pressure bush , plate , heaxagon head screw , hexagon head screw , hexagon nut , parallel key , hex socket cheese head screw , parallel pin , gasket , washer , gasket , joint ring , hexagon head screw , hex socket cheese head screw , pipe connection , sight glass , suction gas filter , sealing plug , clamping plate , gasket , gasket , head socket cheese head screw , bearing bush (crank case side) , oil filter , pipe connection , sealing plug , sealing nut , o ring , gasket , hexagon head screw , sealing screw , head socket cheese head screw , joint ring , sealing plug , mounting (motor side) , pressure relief valve , half length taper grooved pin , joint ring

CTN :45302799

06 Jun, 2026 NA

Budgam - Jammu And Kashmir

Tender For procurement of stores for maintenance of tengible assets - m sand free from moisture and organic , brick, common burnt clay building bricks , aggregate 20 mm , aggregate 40 mm , pcc solid blocks 400 mm x 200 mm x 200 mm , load bearing concrete hollow blocks , led bulb 7 w confirming to is 16102 , led bulb 9 w confirming to is 16102 , led bulb 12 w confirming to is 16102 , led bulb 18 w confirming to is 16102 , led tube light fitting 1 x 12 w 2 feet long as per is 10322 , led tube light fitting 1 x 18 or 22 w 4 feet long is 10322 , pvc exhaust fan 250mm sweep confirming to is 2312 , plastic body wall mounting fan 450mm sweep - is 374 , ceiling fan sweep 1400mm as per to is 374 , flexible wire pvc insulated twin core with copper conductor , pvc insulated cable 1.5 sqmm single core copper , cable pvc insulated, unsheathed , single core , cable pvc insulated and unsheathed single core , pvc insulation tape 2 cm wide 10 mtrs long confirming to is 7809 , switch socket combination 3 or 5 pin 6 amp as per is 3854 , switch socket combination 3 or 5 pin 16 amp -is 3854 , socket 3 pin 5 or 6 amps confirming to is 1293 , socket 3 pin 15 or 16 amps confirming to is 1293 , plug top 3 pin 5 or 6 amp confirming to is 1293 , plug top 3 pin 15 or 16 amp confirming to is 1293 , mcb 16 amp sp confirming to is 60898 , mcb 32 amp sp confirming to is 1293 , mcb 16 amp dp confirming to is 1293 , mcb 32 amp dp confirming to is 1293 , mcb 63 amp dp confirming to is 1293 , bed switch on and off switch as per is 3854 , piano switch one way 6 amps as per is 3854 , piano switch one way 15 or 16 amps as per is 3854 , pvc casing capping 25x16 mm , pvc casing capping square box 4 inch x 4 inch , pendent holder confirming to is 1258 colon 2005 , angle holder with skirt confirming to is 1258 , angle holder confirming to is 1258 , residual circuit current breaker 32 amp dp , residual circuit current breaker 63 amp dp , geyser 15 ltrs with complete accessories , heating device kerosene based heating device , kero heater wicks large confirming to is 1109 , led security light 36w or 40w confirming to is 10322 , led security light 60 or 70w confirming to is 10322 , pvc insulated cable 6 sqmm twin core as per is 694 , pvc insulated service cable aluminium conductor 10 sqmm , mcb distribution bd sheet metal 2 way as per is 13032 , mcb distribution bd sheet metal 4 way confirming to is 13032 , mcb distribution bd sheet metal 8 way confirming to is 13032 , change over switch 32 amp 2 pole confirming to is 13947 , change over switch 63 amp 4 pole confirming to is 13947 , change over 100 amp 4 pole confirming to is 13947 , gi pipe 15mm dia, med grade confirming to is 1239 , gi pipe 20mm dia, med grade confirming to is 1239 , gi elbow 15mm confirming to is 1239 , gi tee 15mm confirming to is 1239 , gi socket 15mm confirming to is 1239 , gi union 15mm confirming to is 1239 , gi nipple 15mm 6 inch long confirming to is 1239 , gi end plug 15mm confirming to is 1239 , gi elbow 20mm confirming to is 1239 part 2 , gi tee 20mm confirming to is 1239 part 2 , gi socket 25mm confirming to is 1239 , gi union 20mm confirming to is 1239 , gi nipple 20 mm dia and 10 cm long confirming to is 1239 , gi tee reducer 20 or 15mm confirming to is 1239 , gi socket reducer 20 or 25mm confirming to is 1239 , gi tank nipple 15 or 20mm confirming to is 1239 , ppr pipe 20mm dia 3 mtr long confirming to is 15801 , ppr elbow 20mm confirming to is 15801 , ppr tee 20mm confirming to is 15801 , ppr socket 20mm confirming to is 15801 , ppr elbow reducer 20 or 25mm confirming to is 15801 , ppr tee reducer 20 or 15mm confirming to is 15801 , ppr union 20mm confirming to is 15801 colon 2008 , ppr end plug 20mm confirming to is 15801 colon 2008 , ppr tank connector 20mm with check nut and washer is 15801 , towel rail cp 750mm long confirming to is 8931colon 2021 , towel ring steel confirming to is 8931colon 2021 , ball brass float valve 15mm confirming to is 1703 colon 2000 , ball brass float valve 20mm confi

Thrust Washer Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors