Get complete information related to latest Tie Bar Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Tie Bar Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Tie Bar Tenders.
Tender For repairing of crowd intermediate shaft, crowd motor base plate, tiebar, bearing housing, driven-driving coupling and miscellaneous other repairing jobs in beas hmb555 ekg-5a shovel
Tender For periodical services(internal) including repairs to flooring,sanitary and plumbing items works in otm and md accn at ridge, raulki area under age b/r-i of ge satwari - notes : (1) work will be carried out upto 4th storey of bldgs and quoted rates of items shall be deemed to include the cost of necessary formwok and scaffolding required as per site conditions., taking down shutters of any description exc 1.00 sqm and not exc 2.00 sqm each and removing from the site complete all as specified & directed., taking down chowkats or frames with shutter (without taking off shutter from the frame) n. exc 1.5 sqm each including cutting holes for taking out hold fast or dismantling brick work and removing from site complete all as specified and directed., taking down chowkats or frames with shutter (without taking off shutter from the frame) exc 1.5 sqm & n. exc 4 sqm each including cutting holes for taking out hold fast or dismantling brick work and removing from site complete all as specified and directed., demolition of cement concrete (un-reinforced) in ground floor to 4th floor and pavings n exc 15 cm thickness (below or above ground level ) and removing the rubbish from the work site to out side defence premises complete all as specified and directed., demolition of concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed., taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubing down with water etc and removing unserviceable material outside defence land complete all as specified and directed., dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed, s&f pressed steel frames of size 125mm x 60 mm made out of size 1.25 mm thick ms sheet for doors with one or more rebates including mild steel hinges, 100 mm long , medium weright and 25 mm x 3 mm flat iron as in hold fast , tiebar including necessary fixing lugs, lock strike plate and fixing arrangement and making good the disturbed surfaces in cement mortar 1:3 or cement concete 1:2:4 type b-1 including pcc 1:3:6 type c1 as in back fill to chowkats complete all as specified and directed., s&f pressed steel frames of size 105mm x 60 mm made out of size 1.25 mm thick ms sheet for doors with one or more rebates including mild steel hinges, 100 mm long , medium weright and 25 mm x 3 mm flat iron as in hold fast , tiebar including necessary fixing lugs, lock strike plate and fixing arrangement and making good the disturbed surfaces in cement mortar 1:3 or cement concete 1:2:4 type b-1 including pcc 1:3:6 type c1 as in back fill to chowkats complete all as specified and directed., s&f 35 mm thick factory made 2nd class hard wood, plain, framed, panelled shutters (two panels) with lock rail and panel of 9mm thick bwp commercial plywood .the size of rail and stiles as per is: 1003(part-1), kiln seasoned and chemically pressure treated, fitted to chowkats complete all as specified and directed., s&f factory made 35 mm thick 2nd class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in ssr part i, section 8, clause 8.24 (a); fitted to chowkats complete all as specified and directed, m&l for 30mm thick factory made flush shutters, solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed., s&f in repair solid pvc door frame of size 50mm x47mm made out of 5mm plain colour pvc sheet reinforced with mild steel square tube, supplying and fixing in opening as per specifi
Tender For purchase of spares for wista perfoaring machines. - lower part of the gripper art no. ws 90-054, gripper receiver lower part art no. ws 90-055 upper part of the gripper art no. ws 90-057, gripper receiver upper part art no. ws 90-058 liner unit beta (80 ssn-m2020-800-170-2sa-2en-ak-4bl-mgk-1 art no. 1000997, sealing top dp 06 r55 art no. 112000-055, plate for type 52-140-7167-549 art no. 81-140-8326, clutch boring 60h7-2 nuts as per din 6885/1, 180 degrees (c) art no. 52-140-7167-549, valve ef art no. evf3133-5y>ob-02f, shaft sealing rings art no. wd 32x52x7 basl, shaft sealing rings art no. wd 40x62x6 basl, shaft sealing rings art no. wd 45x62x8 basl, shaft sealing rings art no. wd 60x80x8 ba, shaft sealing rings art no. wd 60x90x 13 ??, shaft sealing rings art no. wd 90x110x10 ??, plum hammer art no. 0715256 w, guide bush of hammers art no. st7411.32x60, cam ot art no. ws 90-007, advance cam art no. ws 90-027, adjusting excentre art no. ws 90-001, cover disc art no. ws 90-002, tiebar (pull rod) art no. ws 90-021
Tender For purchase of spares for wista perforating machines-, lower part of the gripper art no. ws 90-054, , gripper receiver lower part art no. ws 90-055, , upper part of the gripper, , art no. ws 90-057, , gripper receiver upper part art no. ws 90-058, , liner unit beta (80 ssn-m2020-800-170-2sa-2en-ak-4bl-mgk-1) art no. 1000997, , sealing top dp 06 r55 art no. 112000-055, , plate for type 52-140-7167-549 art no. 81-140-8326, , clutch boring 60h7-2 nuts as per din 6885/1, 180 degrees (c) art no. 52-140-7167-549, , valve ef, , art no. evf3133-5y>ob-02f, , shaft sealing rings art no. wd 32x52x7 basl, , shaft sealing rings art no. wd 40x62x6 basl, , shaft sealing rings art no. wd 45x62x8 basl, , shaft sealing rings art no. wd 60x80x8 ba, , shaft sealing rings art no. wd 60x90x 13 ba, , shaft sealing rings art no. wd 90x110x10 ba, , plum hammer art no. 0715256 w, , guide bush of hammers art no. st7411.32x60, , cam ot art no. ws 90-007, , advance cam art no. ws 90-027, , adjusting excentre art no. ws 90-001, , cover disc art no. ws 90-002, , tiebar (pull rod) art no. ws 90-021,
Tender For supply of set of tiebar assembly for wag9-hc locos. set consist of 3 items ( safety items) 1) tiebar a ssembly for axle(t-type) 1&6 as per rdso drg no.skvl 186.ref.1,2,3 qty:2 nos/set. 2) tiebar assembly fo r axle(l-type) 2&5 as per rdso drg.no.skel 4877.ref.1,2,3 &4-qty:02 nos/set. 3)tiebar assembly for axle (s-type) 3&4 as per rdso drg no.skel 4876.ref.1,2,3 &4- qty:2 nos/set. note: clw approved sources sha ll only participate in the tender or supplier offers shall be considered with valid tender specific authorisatio n certificate from clw source shall be submitted along with their offer. [ warranty period: 30 months aft er the date of delivery ]
Tender For supply of hydraulic rail tensor (non-infringing) 70t capacity as per rdso specification no. tm/sm/32 dated 20.12.1991 first revision-01 of 2020. hydraulic non-infringing obstructionless product de scription rail tensor-operated by double acting hydraulic hand pump complete with all att achments and accesssories recommended by rdso, spec. no.tm/sm/32 dt. 20.12.1991) rdso app roved letter no. tm/sm/apl/01 dated 12-07-2019 each quantity of hydraulic rail tensor consi sts of the following: a. 2 nos. hydraulic unit type : vhrt-70/300 capacity: 70 tonnes hydrauli c stroke: 300 mm pull capacity- 35 ton each push capacity- 15 ton each b. 1 no. hydraulic han d pump with rotary directional control valve type : vhhp-2/rdcv oil tank capacity - 6 liters c. 4 nos. extra high pressure flexible rubber hose- 2 metres long with end couplings- m18x1. 5 type : hyhe-2/ehp-7 working pressure: 700 kg;cm2 d. 2 nos. extra high pressure flexible rub ber hose- 1 metre long with end couplings- m18x1.5 type : hyhe- 1/ehp-7 working pressure: 70 0 kg;cm2 e. 1 no. pressure gauge with adaptor type : pg-109+a dial size: 100 mm pressure ran ge: 0-900 kg/cm2 f. yoke- 2 nos. g. lever arms- 4 nos. h. rail grip-4 nos. i. tiebar-2 nos. j. oil dis tributor-2 nos. k. ram clevis-2 nos. l. tiebar male clevis-2 nos. m. tiebar female clevis-2 nos . n. locking pin-6 nos. please note : provided free of cost for the full consignment the foll owing items : 1) maintenance tools - 1 set. 2) spare repair kit of hydraulic unit-1set. 3) spare repair kit of hydraulic pump-1set. 4) 1 set of operation & maintenance manual. [ warranty per iod: 30 months after the date of delivery ]