Latest tig welding Tenders | Government tig welding Tenders

State Government

CTN :45720713

15 Jul, 2026 2.50 Lacs

Satna - Madhya Pradesh

Tender For supply of materials for carpentry industry (volume 01) - paper tape (branded/high quality) (as per sample), welding rod (branded/high quality) (gauge 8, gauge 10), nails – gauge 14, 17, 20 (branded/high quality) (1 to 4 inches), yellow clay, chalk clay (branded/high quality) (1 kg pack), plastic cane (for chair making) (branded/high quality) (as per sample), chandras (good variety/high quality), nc thinner (branded/high quality) (5-liter can), sandpaper, 4-inch (branded/high quality) (grade 80/100), turpentine oil (branded/high quality) (1 kg packet), paint (all colors) (branded/high quality) (1-liter pack), water-based paint (all colors) (branded/high quality), oil-based paint (all colors) (branded/high quality), brush (sizes 0 to 12) (branded/high quality), brush (branded/high quality) (4-inch), handsaw (16-inch) (branded/high quality), triangular file (4-inch) (branded/high quality), plywood 12 mm (branded/high quality) 4x8, plywood 18 mm (branded/high quality) 4x8, plywood 8 mm (branded/high quality) 4x8, plywood 6 mm (branded/high quality) 4x8, sunmica (1 mm) (branded/high quality) 4x8, sunmica (0.8 mm) (branded/high quality) 4x8, iron angle/iron strip (branded/high quality) – as per size, metal cutting blade (branded/high quality) 14-inch, metal cutting blade (branded/high quality) 4-inch, nuts, bolts, and washers – all sizes (branded/high quality) (as per sample), foam 3", 32 density (3x6) (branded/high quality), foam 2", 32 density (3x6) (branded/high quality), foam 1", 32 density (3x6) (branded/high quality), sofa fabric/rexine (branded/high quality), grinder disc/stone (no. 120, 140) (branded/high quality), putty (1 kg pack), wood cutter circular blade (branded/high quality) 10-inch, gi wire (branded/high quality), broom sticks (30-inch) (good/high quality) solution (sr 505) (branded/high quality) (1 kg packet), welding goggles (black/clear) (branded/high quality), measuring tape (branded/high quality), drill bit (good quality/high quality), wooden block (good quality/high quality), teak wood (good quality/high quality), acacia (babool) wood (good quality/high quality), sheesham wood (good quality/high quality), firewood (good quality/high quality), sealer (1 kg packing), wood touch-up/filler (1 kg packing), sandpaper (grit 120, 100) (good quality/high quality), electric planer (size-specific) (branded/high quality), straight edge/siknja (3 feet) (branded/high quality), bench vice (large size) (branded/high quality), hand drill machine (600 watt) (branded/high quality), compressor gun (500g, 200g) (branded/high quality), compressor hose/pipe (branded/high quality), planer machine moulding die (all sizes) (branded company / best quality)

State Government

CTN :45720727

15 Jul, 2026 6.31 Lacs

Satna - Madhya Pradesh

Tender For bunai udhog material - paper tape , welding rod , khila no. 14, no. 17, no. 20 , yellow soil, chalk soil , plastic cane (for weaving chairs) , chandras , thinner n. c , sandpaper (4 inches) , turpentine oil , paint (all colors) , water paint (all colors) , oil paint (all colors) , brush , brush , saw , triangular sand , ply 12 mm. , ply 18 mm. , ply 8 mm. , ply 6 mm , sanamaika (1mm) , sunmaika (0.8 mm) , iron angle iron bar , iron cutter blade , iron cutter blade , all sizes including nutbolt washer , foam 3"inch, 32 dec , foam 2"inch, 32 pcs , foam 1"inch, 32 dec , sofa cloth/raggin , gridder stone , putty , budcutter round blade , yes. i wire , broomstick , solution (sr 505) , welding glasses (black/white) , inch tape , drill brick , wood discount , wood teak , wood acacia , sheesham wood , firewood , siller , woodtouch , wood paper , electric washing machine , singja , breech vise , hand drill machine , compressor gun , compressor pipe , planer machine molding die , sewing machine oil , short button nylon , hand needle , sewing machine needles (10 pieces per packet) , sewing machine footrest swing , tailor chalk , thread ballast , aprila machine bunch , sewing needle plate , kaichi (08 no., 10 no.) , sharpening stone , sewing machine , interlock machine , embroidery threads , kadhai ka frame , macrame cards (cotton, polyester, nylon, jute) , poly master , foot rope , stapler pin , white paper gsm 80 , ledger paper (green) gsm 80 , white paper gsm 68 , white paper gsm 68 , ruled paper gsm 68 (1000 pieces) , ruled paper gsm 68 , white paper gsm 57 , brown paper gsm 80 , cardseat gsm 165 , dapti section 32 no , rin, surf excel laundry soap , coating , favicol , winding thread , weeding cloth , fountain water , brown tape , screen printing ink , decoter , german sponge , reducer , widening paper , synthesizer , yellow envelope paper , stapler gun , widening paper , coloured paper gsm 70 , picking wall faywar , pickers , rate chit ketch (leaf set) , pressing cane lever -lr-101 , wooden steel 29 number , wheel gear 14 t-62 no. , wevel gear , warm wheel steedy , rechit gotan liver , buffer soldering bracket , buffer bands (leather) , stick cape , baring , ratchet wheel , visit weaver , warm , parachute rope , fine belt , picking stick , tariff wheel , handloom pickers , colorfast , powerloom steel comb , yarn in 2/40s cone (coloured/white) , yarn 6s in coloured cones , colored wool , yarn 2/60s in cone (coloured/white) , jute cloth , yarn in 65 cones , hand loom combs (12 nos.) , warping machine brake - belt leather , dari panja (wood) , emery strip , spend frame hookah set , pick weaving rods, weaving rods (handloom) cast iron welding rods , temple rod/cover , swelling filler

Central Government/Public Sector

CTN :45710566

07 Jul, 2026 NA

Medak-T - Telangana

Tender For supply of enquiry for er 70s-2 tig welding rod

CTN :45720703

30 Jul, 2026 2.00 Crore

Chhatarpur - Madhya Pradesh

Tender For inviting rates of different items for construction of diffrent type of work as per demand on cm help line or ward parsad or public - supply of handpump material 2026-27, excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location with all lifts and lead up to 1000 m as per section-300 of the specifications.item no nvi-3.12, construction of embankment/sub-grade/earthen shoulders with material obtained from other sources, as per provisions of section 305 of the specifications, with approved materials/soil confirming to requirements given in table 301-1 of specifications including all lead and lifts, including cost of watering, compaction by vibratory roller/heavy pneumatic type roller etc. confirming to requirements given in table 301 2 of the specifications complete.item no nvi-3.12, construction of granular sub-base, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method at omc and compacting with vibratory roller of 80-100 kn static weight to achieve the desired density, including all lifts and lead complete in all respect as per section-400 of the specifications.by mix in place method item no nvi -4.1.1.1, construction of dry lean cement concrete sub- base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 26.5mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1 of the specifications, cement content not to be less than 150 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with paver with electronic sensor/mechanical paver, compacting with 8-10 tonnes vibratory roller, finishing and curing and as per section 601 of specifications.item no nvi- 6.1.1, providing and laying cement concrete grade m-20 with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate / screed vibrators including form work by strong steel girders fixed by spikes, separation membrane 125 micron thick, including cutting of joints @ 4 to 5 m interval and filling it with hot applied bituminous sealant (without dowel bars) (max. thickness 20 cm).item no nvi-6.4, construction of dowel jointed, plain cement concrete pavement in m-30 grade concrete over a prepared sub base with 43 or higher grade cement, coarse and fine aggregate conforming to is:383 maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver with electronic sensor spreading the concrete by shovels, rakes compacted using needle, screed and plate vibrator and finished in a continuous operation including provision of contraction, expansion, and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, placing of dowel bar, tie rod admixtures as approved, curing compound, finishing to lines and grades as per approved drawings as per irc:15 and as per section-602 of the specifications complete excluding cost of steel in dowel bar and tie rod etc.item no nvi-6.2.1, earth work in excavation for foundation, trenches for pipes / cables or drains etc. by mechanical means / manual means (exceeding 30cm in depth.) including ramming of bottom,dressing of sides,disposal of excavated earth including of all lift and lead upto 50m.disposed earth to be levelled and neatly dressed.all kinds of soil item no nii 2.6.1, demolishing cement concrete manually/by mechanical means including disposal of material with in 50 meters lead as per direction of engineer-in-charge.1:3:6 or richer mixitem no nii

CTN :45726996

09 Jul, 2026 5.00 Lacs

Rajauri - Jammu And Kashmir

Tender For supply of steel wire 20 mtr , insect killer rod , bulb 9 watt , ro pre filter , eme flag , refrigerator filler , key chain

CTN :45715802

20 Jul, 2026 NA

Kamrup - Assam

Tender For supply of electrode e6013 3 15 mm , electrode e6013 2 15 mm , ss filler rod er308l 1 6 mm , brazing rod 1 6 mm , flux , mig wire m s 1 2 mm , mig wire s s 1 2 mm , mig wire m s 0 8 mm , tungsten for tig welding red colour 2 4 mm , tungsten for tig welding gold colour 2 4 mm , cutting wheel 105 mm , rough wheel grinding wheel 105 mm , pipe cutting wheel 355 mm , smooth wheel abrasive wheel 100 mm , welding glass 3mm , welding glass white , carbon brass

CTN :44320009

01 Jul, 2026 NA

Tiruvallur - Tamil Nadu

Tender For bid to ras supply of tig welding torch water cooled 400 model; wc/400 amperes , tig welding torch head tig welding machine; torch head sap wc/400 amps , mig welding torch

CTN :45469219

04 Jul, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of z943 strippex (avl) (n8010-p060879) (25bqec024) , z948 strippex (ajr) ) tape (1 no= 51mmx1.27mmx2.6m) (n8010-p060884) (25bqec024) , z931 (a) (strippex aerosol spray (n8030-p060865) (25bqec024) , al filler wire 5% silican (n3439-000139) (25bqec024) , alluminium filler rod 3.15mm (n3439-000298) (25bqec024) , piping steel galvanised medium 65mm bore x 3.65mm thick (n4710-000032) (25bqec024) , piping, steel, medium, galvanised (welded or seamless) 114.3mm (n4710-000034) (25bqec024) , bolt with nut m6x20mm (n5306-000775) (25bqec024) , bolt m/c hex hd prec coarse pitch phos steel 4.6 m 12x65mm (n5306-003479) (25bqec024) , alu. alloy angle equal sided sizes (mm) 25x25x3 (n9540-000003) (25bqec024) , alliminium alloy angle 40x40x3mm (n9540-000005) (25bqec024) , flux welding silver solder (n3439-000176) (25bqec024) , ms electrodes welding dia 4mm (n3439-000226) (25bqec024) , eye plate, rectangular, id 32 mm (n4030-000829) (25bqec024) , pipe cu ni fe alloy (90/10) ed 21.49-21.41 id 19.05 th 1.22mm (n4710-000378) (25bqec024) , hinge steel 50mm (n5340-000903) (25bqec024)

Central Government/Public Sector

CTN :45628480

10 Jul, 2026 1.79 Lacs

Haridwar - Uttarakhand

Tender For corrigendum : hw7799993065 water cooled tig welding torch , o ring of water cooled tig welding torch , hw7799993120 electrode shield long of water cooled tig welding torch , hw8429988394 back cap short l , hw8429960171 water cooled tig torch

Central Government/Public Sector

CTN :45499214

15 Jul, 2026 NA

Haridwar - Uttarakhand

Tender For corrigendum : supply of 1-hw7799992131-contact tip adaptor of mig torch pmt 52w,part no.w004508 oem spare of kemppi, finland , 2-hw7799992026-wire conduit red,l-4.5 meter of mig torch pmt 52w, part no. 4188582 oem spare of ms kemppi, finland dia 0.9-1.2 mm , 3- hw7799992425-contact tip 1.2 dia m8 dhp for stainless steel of mig torch pmt 52w, part no. 9580124ss oem spare of ms kemppi finland , 4- hw7799992409-dl chili teflon liner for al or ss dia. 1.2-1.6, l-3m of mig torch pmt 52w. part no- w005922. oem spare of ms kemppi, finland , 5-hw7799993936- hose clamp of synergic mig or mag welding machine, model- common for msf 57,fastmig and weldforce,part no-9377123 oem spare of ms kemppi, finland , 6-hw7799997320-gun neck for welding torch gx505w, part no-sp012561, oem spare of kemppi, finland , 7-hw7799997346-gas nozzle, for welding torch gx505w,part no-w013931,oem spare of kemppi, finland , 8-hw7799997370-contact tip adaptor, for welding torch gx505w part no- w013203, oem spare of kemppi finland , 9- hw7799997443-wire liner 1,2 al or ss 5, 0 m dl-chili for welding torch gx 505 w part no-w013611, oem spare of kemppi finland , 10-hw7799997451-hose clamp for welding torch gx 505 w part no- sp9377122 oem spare of kemppi finland , 11- hw7799997354-contact tip 1.4 mm m10 std forwelding torch gx505w part no- ct14c2sd001, oem spare of kemppi, finland , 12-hw7799999012-wire liner 1,2 al or ss 5,0 m dl-chili for welding torch gx 505 w part no-w013611, oem spare of kemppi finland , 13-hw7799999020-hose clamp for welding torch gx 505 w part no-sp9377122 oem spare of kemppi finland , 14-hw7799993090-gas nozzle no 4 of water cooled tig torch model no-ttc 250w 4m, part no. 7990766, size-6.5mm, oem spare of kemmpi, finland , 15-hw7799993103-gas nozzle no 5 of water cooled tig torch model no-ttc 250w 4m, part no. -7990770 size-8.0 mm, oem spare of kemppi, finland , 16- hw7799993111-gas nozzle no 6 of water cooled tig torch model no-ttc 250w 4m, part no- 7990771 size- 9.5 mm, oem spare of kemppi, finland , 17- hw7799993073-tighting bush 2.4 of water cooled tig welding torch modelno-ttc 250w 4m, part no. 9876868 oem spare of kemppi finland , 18- hw7799993081-housing for tightening bush of water cooled tig torch model no-ttc 250w 4m, part no.-7990682, oem spare of kemppi, finland , 19- hw7799993120-electrode shield long of watercooled tig welding torch model no.- tx 355 w4m, part no. 7990741, oem spare of kemppi finland

Tig Welding Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector