Tender For supply of concrete sub base and storm water for volleyball court , roof and shed work for indoor volleyball court , synthetic flooring for indoor volleyball court , all weather suitable tiles for free zone for indoor volleyball court , flood lighting anti glare 200 watt non masked set of 4 , roof top ventilators for indoor volleyball court , outlet of rain water for indoor volleyball court , volleyball poles with net , volleyballs , referee chair with microphone , electronic scoreboard led type
Tender For construction and development (civil work) for construction and demolition waste plant of 100 tpd as per boq of rfp/dpr supplying erection and commissioning of machines/equipment for construction and demolition (c and d) waste plant of 100 tpd 2nd cal - all kinds of soil, "excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers,, loose or soft soil, providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all w, cement concrete grade m-20 (nominal mix) with 20 mm maximum size of stone aggregate., "foundations, footings, bases of columns, etc. for mass concrete.", cement concrete grade m-20 (nominal mix) with 20 mm maximum size of stone aggregate., "columns, pillars, piers, abutments, posts and struts.", "reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 landings, balconies, shelves,, "lintels, beams, plinth beams, girders, bressumers and cantilevers.", "along external wall where the apron is not provided using chemical emulsion @ 7.5 liters / sqm o, "filling by available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exce, thermo-mechanically treated bars. (fe 500 d or more), "aluminum turbo ventilator fan, size: dia 600 mm market rate", "sky light market rate ", 80x1.25mm m.s. laths with 1.25 mm thick top cover., "providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to is: 1868 wit, cement mortar 1:6 (1 cement : 6 coarse sand), 1:6 (1 cement: 6 sand), two or more coats on new work, "structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoist, 0.80mm thick with zinc coating not less than 275gm/m , 0.80mm thick with zinc coating not less than 275gm/m , "35 mm thick including isi marked stainless steel butt hinges withnecessary screws.", 35 mm thick shutters, half brick masonry with of class designation 40 in foundation and plinth in.cement mortar 1:4 (1 cement : 4 coarse san, "providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) nano polished (glossy, providing and laying broken china mosaic flooring for terrace using 12mm to 20mm broken pieces of glazed tiles to be lai, providing and fixing m.s. grills of required pattern to wooden frames of window etc. with m.s. flats at required specin, "construction of embankment/sub grade/ earth shoulders, as per clause 305 & its sub-clauses, where required but with app, "construction of granular sub-base by providing coarse graded material (cbr>30), spreading in uniform layers with motor, "providing, laying, spreading and compacting graded stone aggregate to wet mix macadam including premixing the material, providing and applying primer coat with cationic bitumen emulsion (ss1 grade) on prepared surface of granular base inclu, @ 0.25 kg per sqm (normal bituminous surfaces), for grading ii( 50-75mm thickness ) bitumen content 3.4% (vg-30), "for grading ii ( 30-40 mm thickness ), bitumen content 5.4% (vg-30)", procurement of fully automatic c&d waste processing unit(100 tpd) with dry and wet process inculding feeding & crushin, procurement of table vibrator for paver making unit including table vibrator,colour mixer,colour pigment,tables,concre, procurement of fully automatic fly ash bricks machine (120 ton compress force) with fully sensor based controlled 7 nos, procrement of vehicles articulated front end wheel loader,4-wheel drive,1.4 cum bucket,hydrostatic drive,, procrement of vehicles/tipper truck blazo 28t tipper,9 speed,bogie suspension,11x20-16pr tyres,6.17rar ,nac,16 cum box,4, procurement of pneumatic breaker (quotation), electrification /internal wiring and electrification (market rate)
Tender For providing and fixing of false ceiling, vitrified tiles flooring, painting and aluminium partition in room no 407, 408, 409 on 4th floor for national mission-iia office at gsi dharitri building salt lake, sector-v, kolkata during 2024-25.( sh:- electrical work)(balance work)subwork/packages:electrical work (balance work)
Tender For balance work of landasangvi head works staff quarter building (flooring tiles, painting, electrification, cctvs etc.,) in adilabad municipaliy. (reserved for sc labour cont. co-op societies / individuals), est. cost rs.4.50 lakhs, mgf grant
Tender For dnit name : repairing of plaster work and providing and laying vitrified floor tiles, water proofing, floor mounted, pcc, flush door shutters, paint work, sanitary work in house no.1413, 1414, 1415 and 146 in sector-15 faridabad and all other works contingent thereto. chargeable head - annual maintenance of hsvp staff quarters in sector-15 and 15a, faridabad for the year 2026-27. - [10.1]providing and laying of base course of floors consisting of 100 mm thick cement 1:8:16 and 100 mm sand or stone filling., [10.109]providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of engineer-in-charge., [10.67.1]providing and laying vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to i.s. 15622, of approved make, in all colours and shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement and matching pigments etc. complete. 1. size of tile 500x500 mm, [11.5.3]12 mm cement plaster of mix : 3. 1:4 (1 cement: 4 fine sand), [11.6.2]15 mm cement plaster on the rough side of single or half brick wall of mix : 2. 1:6 (1 cement: 6 fine sand), [11.64.1]distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : 1. new work (two or more coats) over and including water thinnable priming coat with cement primer, [11.96.1]finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade: 1. new work (two or more coats applied @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm), [12.157.1.2]providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate z sections and other sections of approved make conforming to is: 733 and is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / panelling, c.p. brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer-in-charge. (glazing, panelling and dash fasteners to be paid for separately) : 1.2. for fixed portion powder coated aluminium (minimum thickness of powder coating 50 micron), [12.159.2]providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (cost of aluminium snap beading shall be paid in basic item): 2. with float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm), [13.29.1]steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 1. in stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete, [13.44]providing and fixing circular/ hexagonal cast iron or m.s. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick m.s. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ m.s. sheet box by means of