Latest time relay Tenders | Government time relay Tenders

Central Government/Public Sector

CTN :45549324

18 Jun, 2026 NA

Multi City - Multi State

Tender For insulation monitoring relay,415 v ,3 phase, neutral isolated, voltagerange 0-500 v ac, insulation measuring range-10 k ohm to 150 k ohm, control supply 24-240 v ac/dc, place of installation - s1a7, used for insulation control 415 v of lhb type ac coaches, confirming to rdso spec. no.rdso/pe/spec/ac-0184-2015 (rev.1), suitable for lhb type ac coaches switch board cabinet (s1a7),accepted make as per s. no.68 of the common bom list issued vide rdso letter no. el/7.1.108/mssbc dated 17.09.2021 or any other rdso approved make. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45548325

02 Jul, 2026 NA

Bangalore - Karnataka

Tender For supply of "control relays 4 no + 4 nc contacts 2 no + 2 nc in main contactor and 2 n0 + 2 nc in add on block. the contacts are rated for 4 amps at 415 volts 50 hz, ac with 110 volts 50 hz ac operating coil. the relay should have din rail mounting facility suitable to mount on 35 mm standard channels." note: make offered shall be indicated." ]

State Government

CTN :45521250

29 Jun, 2026 42.81 Lacs

Jaipur - Rajasthan

Tender For nit 21 work of replacement of submersible pump sets and accessories of tubewell at various locations under uwss chomu under jen section chomu (urban) under sub div chomu in jurisdiction of executive engineer, phed district division ii, jaipur - 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.2 up to 5.5 kw (7.5 hp) & head above 120 mtr., 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.4 7.5 kw (10 hp) & head above 120 mtr., 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.6 9.3 kw (12.5 hp) & head above 120 mtr., 2.18 supply and fixing of electric control feeder panel comprising of suitable rating mccb , fully automatic star-delta starter, over load relay, ampere meter with cts, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. the panel should have space for energy meter ( supplied by discom). all these equipments shall be housed by panel box made out from 18 gauge m.s. sheet with powder coating. panel should be of minimum size 900 x 600 x 450 mm with stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg s length 18 and double door including in built locking system. the legs should be embedded in m-15 cement concrete plat form. the size of cc platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. the panel should have opening of suitable size in front of space for energy meter with glass for meter reading. the operation of panel should be suitable for on 440 volt ac supply.2.18.1 above 5 hp and up to 10 hp, 2.18 supply and fixing of electric control feeder panel comprising of suitable rating mccb , fully automatic star-delta starter, over load relay, ampere meter with cts, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. the panel should have space for energy meter ( supplied by discom). all these equipments shall be housed by panel box made out from 18 gauge m.s. sheet with powder coating. panel should be of minimum size 900 x 600 x 450 mm with stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg s length 18 and double door including in built locking system. the legs should be embedded in m-15 cement concrete plat form. t

Central Government/Public Sector

CTN :45470956

17 Jun, 2026 NA

Delhi - Delhi

Tender For supply of set of spares for maintenance of electrically operated synchronized screw jack, cap. - 25 ton as per attached annexure-"a" for navyug industries (new delhi) make electrically operated synchronized screw jack, cap. - 25 ton- ball bearing for guide roller on girder , oil seal set for gear box (total 03 nos. in a set) , main thrust bearing on top of screw, , 25 a power contactor., , limit switch lim-1 to lim 8 up/down , emergency switch, , omron relay for control 8 pin, , selector switch 6 amp. single pole 3-position , single phase preventer

Central Government/Public Sector

CTN :45547846

07 Jul, 2026 NA

Shakti - Chhattisgarh

Tender For u acting for and on behalf of the president of india invites e-tenders against tender no snt-gsu-ju-2026-27-02 closing date/time 07/07/2026 15:00 hrs. bidders will be able to submit their original/revised bids uptoclosing date and time only. manual o ers are not allowed against this tender, and any such manual o er received shallbe ignored.1. nit headername of works&t works in connection with "proposed new block station along withdevelopment of goods shed at manklav station."bidding typenormal tendertender typeopenbidding systemsingle packet systemtender closing datetime07/07/2026 15:00date time of uploadingtender12/06/2026 13:59pre-bid conferencerequirednopre-bid conference datetimenot applicableadvertised value 47125807.08tendering section gsu/sntbidding style single rate for tender bidding unitabove/below/parearnest money (rs.) 942500.00validity of offer ( days) 60tender doc. cost (rs.)0.00period of completion 12 monthscontract type works - general contract category expenditurebidding start date 23/06/2026are jv allowed to bid nonumber of jv memberallowed0are consortium allowedto bidnonumber of consortiummember allowed0ranking order for bidslowest to highest expenditure typecapital (works)2. schedules.no. itemcodeitem qtyqty unitunit ratebasic value escl.(%) amount biddingunitschedule () a-sor items39263428.66101010200 1.00 station12060441.7212060441.72 at par12060441.72description:- design, manufacture & supply of electronic interlocking (ei) system (with centralizedarrangement) for 4 (four) line stations as per signal interlocking plan in 'hot standby architecture'.ei system shall be provided to operate with dual vdu control terminal as per rdso speci cationno.rdso/spn/ 192/2019 ver. 2 or latest and from rdso approved source only. it mainly consist ofmicroprocessor equipments, interface equipments, ei vendor speci c interfacing relays , in-builtevent logger, in-built power supply equipments, racks (only relay rack/ei rack), indoor cables,wires, fuses , fixtures, mounting arrangements along with all accessories required to makecomplete ei system functional. design of indoor ei system should be compatible as per outdoorinterlocking requirement based on signal interlocking plan & selection table of station/yard. thisitem also includes supply of following :- (a) supply of documents/manuals for ei system as per rdsospecn.no. rdso/spn/192/2019 ver. 2 or latest. (b) supply & provision of protective devices likesurge and lightning protection devices compatible to re standards as recommended by oem / rdso.note: it includes supply of all the material which is required to make complete ei system to befunctional and as recommended by rdso in specn.no.rdso/spn/192/2019 ver. 2 or latest. design ,manufacture & suupply of ei system will be done by oem after following all the guidelines/directivesissued by rdso from time to time.the technical requirements are attached with the tenderdocument. railway will supply rdso approved type of relays with approved contact con gurationonly . in case of requirement of vendor speci c relays/relays with non-rdso approved contactconfiguration being supplied, the same shall be supplied by the tenderer and cost of required relaysshall be included in the cost of ei (electronic interlocking) system and number & type of such relaysshall be indicated separately. inspection: rdso inspection charges: borne by railways paymentterms:100% after supply01010500 1.00 station624714.48 624714.48 at par 624714.48page 1 of 36run date/time: 12/06/2026 13:59:59jodhpur division-gati shakti/north western rlytender documenttender no: snt-gsu-ju-2026-27-02closing date/time: 07/07/2026 15:002description:- installation, wiring, testing and commissioning of ei system with 'hot standby'architecture as supplied upto 6 (six) line station. it includes transportation of material fromconsignee's depot to the site, erection and grouting of ei relay racks, xing and wiring of all theinterfacing relays (vital &

State Government

CTN :45520196

25 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For erection of 01 nos 33kv rewan bay with supply of material, integration and remote gateway work at 220kv ss bangra under etd jhansi - erection of following different type main and auxiliary structur, columns, beams, peaks, masts ets. suitable for placing of kv equipments., main structure & auxiliary structure., erection of following equipments as per instruction manual of various equipments and technical specification including shifting of material / equipments from sture to erection site including all other associated work to complete the job satisfactorily., 36kv v.c.b., 36kv bi, 36kv li, 36kv ct, ct junction box, cutting. strenghtening. bending. laying 700mm. below in side ground and above ground og following size of ms flat for earthing of main and auxiliary structure. equipment structure t/f body and its material etc. including welding with main earth mat and with object to be earthing / excavation of trenches its back filling., 75x10mm ms flat, 50x6mm ms flat, 25x10mm ms flat, provinig, fixing & installation of glow sign board (as per sample) of size 8ft x 6ft for updated substation single line diagram duly checked & verified by concerned ae, to be fixed in control room building of substation with all other associated work to complete the job satisfactorily as per drawing and technical specn. of upptcl, the glow sign board illumminated using led tube light in sufficient quantity. the board shall be made of acrylic sheet of suitable thickness and color and shall be provided with back support frame & fixing arrangement with wall., interconnection of equipments and bus bar including cutting. bending of conductor and jumping, clamping along with all other associated work to complete the job satisfactorily as per drawing and technical specn., equipment jumper with 1xmoose, 10mtr, 33kv, bus bar jumper with 1xmoose, 10mtr, 33 kv, 6m, laying of following sizes of control cable in the cable trench from control relay panel to various equipments / marshalling boxes and jb etc. in switchyard as per cable schedule., 2c x 2.5 sq mm. unarmoured., 4c x 2.5 sq mm. unarmoured., 6c x 2.5 sq mm. unarmoured., termination of 2cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 4cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 6cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., preparation of cable schedule and case interconnection diagram in between relevant panel,cb,ct,pt,etc.., providing and fixing of led street light luminaries, single piece aluminum body suitable for 120 watt having lumen output not less than 10,000 nom on 9 mtr. long stp/substation main structure column with g.1. pipe bracket complete in all respect cat. a philimps bajaj/ crompton/havells or equivalent make including cost of g.1. pipe brackets and all related accessories., supply, supply of single tension fitting suitable for acsr moose as per sample, supply of single suspension fitting suitable for acsr moose as per sample, supply of 33kv ct clamps suitable for acsr moose as per sample, supply of 36kv isolator jaw as per sample, supply of copper bond 16x500mm, supply of 33 kv isolator clamps suitable for acsr moose as per sample, intregration & remote gateway work, supply of required material with installation and intregration of new 33 kv line control & relay panel with iec -61850 compliant ied with existing automation system and addition of bay into remote gateway & data validation work.

State Government

CTN :45520197

25 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For erection of 01 nos 33 kv birdha bay with supply of material, integration and remote gateway work at 220kv ss birdha under etd jhansi - erection of following different type main and auxiliary structur, columns, beams, peaks, masts ets. suitable for placing of kv equipments., main structure & auxiliary structure., erection of following equipments as per instruction manual of various equipments and technical specification including shifting of material / equipments from sture to erection site including all other associated work to complete the job satisfactorily., 36kv v.c.b., 36kv bi, 36kv li, 36kv ct, ct junction box, cutting. strenghtening. bending. laying 700mm. below in side ground and above ground og following size of ms flat for earthing of main and auxiliary structure. equipment structure t/f body and its material etc. including welding with main earth mat and with object to be earthing / excavation of trenches its back filling., 75x10mm ms flat, 50x6mm ms flat, 25x10mm ms flat, provinig, fixing & installation of glow sign board (as per sample) of size 8ft x 6ft for updated substation single line diagram duly checked & verified by concerned ae, to be fixed in control room building of substation with all other associated work to complete the job satisfactorily as per drawing and technical specn. of upptcl, the glow sign board illumminated using led tube light in sufficient quantity. the board shall be made of acrylic sheet of suitable thickness and color and shall be provided with back support frame & fixing arrangement with wall., interconnection of equipments and bus bar including cutting. bending of conductor and jumping, clamping along with all other associated work to complete the job satisfactorily as per drawing and technical specn., equipment jumper with 1xmoose, 10mtr, 33kv, bus bar jumper with 1xmoose, 10mtr, 33 kv, 6m, laying of following sizes of control cable in the cable trench from control relay panel to various equipments / marshalling boxes and jb etc. in switchyard as per cable schedule., 2c x 2.5 sq mm. unarmoured., 4c x 2.5 sq mm. unarmoured., 6c x 2.5 sq mm. unarmoured., termination of 2cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 4cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 6cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., preparation of cable schedule and case interconnection diagram in between relevant panel,cb,ct,pt,etc.., providing and fixing of led street light luminaries, single piece aluminum body suitable for 120 watt having lumen output not less than 10,000 nom on 9 mtr. long stp/substation main structure column with g.1. pipe bracket complete in all respect cat. a philimps bajaj/ crompton/havells or equivalent make including cost of g.1. pipe brackets and all related accessories., supply, supply of single tension fitting suitable for acsr moose as per sample, supply of single suspension fitting suitable for acsr moose as per sample, supply of 33kv ct clamps suitable for acsr moose as per sample, supply of 36kv isolator jaw as per sample, supply of copper bond 16x500mm, supply of 33 kv isolator clamps suitable for acsr moose as per sample, intregration & remote gateway work, supply of required material with installation and intregration of new 33 kv line control & relay panel with iec -61850 compliant ied with existing automation system and addition of bay into remote gateway & data validation work.

Central Government/Public Sector

CTN :45519097

16 Jun, 2026 NA

Vellore - Tamil Nadu

Tender For corrigendum : mandatory spare for patratu esp and sbmcc - acp 4000a, 0-25a, ctr 25/1a, 0-50a, ctr 50/1a, 0-75a, ctr 75/1a, nr_ i/c, dae_b/c_dae o/g, coupling relay _ 220v dc, support insulator _main bb, "support insulator_ vrtical bb", "spring charging mtr(2000a-4000a)", aux. contacts (2000a-4000a), "position ind switch (2000a-4000a)", "spring chrgd ind. switch 2000-4000a", trip ind. switch 2000-4000a, aru chute 4000a, fixed contact set 4000a, moving contact set 4000a, arcing contacts 4000a, charging spring 2000a to 4000a, ct metering 25/1a, ct metering 50/1a, ct metering 75/1a, ct protection 4000/1a, ct ps class 4000/1a, closing coil 2000-4000a, trip coil 2000-4000a, pt 415 3/110 3,50 va, cst 2.0 kva, cst 3.0 kva, cst 250 va, power cntr 25a_240vac, power cntr 16a_110vac, power cntr 32a_110vac, power cntr 115a_110vac, pc coil 25a_240vac, pc coil 16a_110vac, pc coil 32a_110vac, pc coil 115a_110vac, sfu 63a, sfu 125a, mccb 250a, mccb 400a, "double pole on/off switch_220vdc", "2p,2posi,l/r selector switch", "double pole on/off switch_240vac", "sp on/off switch for motor space htr", "4p 2posi,selector switch_240vac", "4p,2posi, a/m selector switch", "4p,2posi,selector switch_110vac", "double pole on/off switch_space htr", sp on/off switch for socket, ammeter selector switch, control fuse 6a, control fuse 10a, control fuse 16a, control fuse 63a, neutral link 20a, neural link 32a-63a, neutral link 200-400a, ind.lamp _red _110vac, ind. lamp _green _110vac, ind lamp _blue _110vac, ind lamp _red _220vdc, ind. lamp _green _220vdc, ind.lamp _red _240vac, ind.lamp _yellow _240vac, ind. lamp _blue _240vac, ind. lamp _green _240vac, ind. lamp _amber _240vac, ind. lamp _red _415vac, vertical bb dropr support insulator, push button, power fuse 6a, power fuse 16a, power fuse 25a, power fuse 32a, power fuse 63a, power fuse 125a, olr1.0-1.6a, olr 2.5-4.0a, "ind. lamp hldr _green_220vdc", ind. lamp hldr _red_220vdc, "ind. lamp hldr _amber_240vac", ind. lamp hldr _red_110vac, "ind. lamp hldr _blue_110vac", "ind. lamp hldr _green_110vac", busbar al flat piece_150x6, busbar angle _4000a, terminal block fixed, 32 pinmale housing tb, 32 pin female housing tb, 40 pinmale housing tb, 40 pin female housing tb, 16 pinmale housing tb, 16 pin female housing tb, spanner set., screw driver set., nose player, insulation tape, wire cutter, tester, ammeter 10/1a, voltmeter 0-500v, nr_ i/c, dae_b/c_dae o/g, support insulator _main bb, support insulator_ vrtical bb, ct metering 10/1a, ct metering 5/5a, pt 415 3/110 3,50 va, cst 2.5 kva, power cntr 16a_110vac, pc coil 16a_110vac, isolator switch 25a, ammeter selector switch, 4p,2posi,selector switch_110vac, double pole on/off switch_space htr, sp on/off switch for socket, voltmeter selector switch, control fuse 6a, control fuse 16a, control fuse 25a, neutral link 20a, ind.lamp _red _110vac, ind lamp _blue _110vac, ind.lamp _yellow _240vac, ind. lamp _blue _240vac, ind. lamp _red _415vac, vertical bb dropr support insulator, olr 0.4-0.63a, olr1.0-1.6a, olr 1.6a-2.5a, olr 0.63-1.0a, ind. lamp hldr _red_415vac, ind. lamp hldr _red_110vac, ind. lamp hldr _blue_110vac, ind. lamp hldr _yellow_240vac, busbar al flat piece_50x6, terminal block fixed, 32 pinmale housing tb, spanner set., screw driver set., nose player, insulation tape, wire cutter, tester

Central Government / Public Sector

CTN :45549001

01 Jul, 2026 NA

Tirupati - Andhra Pradesh

Tender For supply of insulation monitoring relay, 415v ac, 3phase, neutral isolated, rated voltage range 0-500v ac, insulation measuring range : 10 k ohm to 150 k ohm, control voltage : 24-240v ac/dc, and place of installation s1a7, as per rdso spec.no. rdso/pe/spec/ac/0184-2015 (rev.1) or latest & bom lr.no. - el/7.1.108/mssbc dt. -17/09/2021 or latest, suitable for lhb type ac coaches switch board cabinet (s1a7). acceptable makes as per bom: abb cat.no.cm.iws.2s, schneider cat no. vigil ohm/imd-im10, siemens cat no.3ug4581-1aw31, dold cat no. il 5880.12, contrel cat no. ir 470ly-21a,ri-r138, woka and bender only acceptable. [ warranty period: 30 months after the date of delivery][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government / Public Sector

CTN :45546018

17 Jun, 2026 NA

Hyderabad-T - Telangana

Tender For supply and replacement of spares for relay test bench at lgds of make: m/s advance instrumentation n control systems(aics) 1) supply and replacement of single phase variac in relay test bench of make aics- 01 no 2) supply and replacement of diode bridge assembly in relay test bench of make aics- 01 no [ warranty period: 30 months after the date of delivery ] ]

Time Relay Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors