Latest tipoy Tenders | Government tipoy Tenders

CTN :45525479

06 Jul, 2026 11.85 Lacs

Kamrup - Assam

Tender For establishment of material testing laboratory under o/o the agm(c) design and projects aegcl kahilipara - civil works, compression testing machine (2000kn) with digital reading, automatic pace control with all attachment for testing concrete cube & bricks conforming to indian standards (is: 516, is: 14858) and can also be supplied as per british standards (bs: 1881), astm c-39 with calibration certificate. it should be typically calibrated to class 1 accuracy ( 1%); featuring a robust, fully welded loading unit and hardened, ground, and polished platens, often with a self-aligning upper platen; with display type as pc-controlled with software. it should have pace rate of full three-term pid feedback control with fully automated data acquisition, storage, and analysis. the operation should be fully automated, stress & strain controlled loading., aggregate impact test, crushing value apparatus with hammer weight of 13.75 kg 0.25 kg (or 14 kg 0.5 kg), height of free fall of 380 mm 5 mm, impact cup (mould) inner diameter of 102 mm 0.25 mm and impact cup depth of 50 mm 0.25 mm as per is 2386 (part iv), bs 812-112. automation grade often semi-automatic with a digital counter. display type digital for the blow counter; sometimes includes a digital gauge for other measurements. overall weight (approx.) should be of 45 kg to 60 kg (total machine mass). standards compliance conforms to international standards like is: 2386 (part iv), bs 812-112, etc. , sieves: (40, 20, 10, 4.75, 2.36, 1. 18) mm with lid and pan and (0.6, 0.3, 0. 15, 0.075) with lid and pan (all 200mm diameter size) metal : gi, weighing balance-30kg (accuracy-1gm)., weighing balance-5kg (accuracy-0.1gm)., hot air oven with double walled design, thick glass wool insulation to prevent heat loss, micro processor based auto tune pid digital temp controller cum indicators and 230 volt 50hz single phase ac supply, heavy duty stainless steel lock, indoor hinge and sample placement trays, temp range should be 50 degree c 250 degree c with temp accuracy 0.5 degree c. it should have digital led display of size 45 cm x 45 cm x 45 cm (inner)., cube mould (cast iron) of size 150mmx150mmx150mm, isi marked as per is:10086. weight of the mould will be about 13.5 kg, strictly as per bis specifications and within required tolerance., slump cone test apparatus-(isi marked)-with tamping rod (complete set ) as per is: 7320 and is: 1199 part 2, consisting of slump cone, base plate and graduated tamping rod - made of stainless steel., proctor test apparatus with all accessories as per is: 2720 part 8 and is: 10074(1982), complete with base plate and collar., measuring cylinder-borosilicate (1 complete set ) glass of sizes 100 ml, 250 ml, 500 ml and 1000 ml., field density test app-core cutter method ( complete set) complete with core cutter of 100 mm dia x 130 mm long with chromium plating, dolly for 100 mm dia core cutter, and rammer with steel rod as per is : 2720, rebound hammer digital (original/silver schmidt type n) with calibration certificate as per is 516 part 5, sec 4 with impact energy of 2.207 nm (1.63 ft-lbf), concrete strength range of 10 100 mpa (1450 14500 psi) and weight of 570 g (1.3 lb) with display as graphic lcd (e.g., 17x71 pixels) or analog/digital and battery life: >5000 impacts., ultrasonic pulse velocity test apparatus (proceq, acoustic control systems, vedantrik technologies) with calibration certificate and frequency range of 24 500 khz (nominal transducer); measurement resolution of 0.1 s (microseconds); pulse voltage ranging from 125 v to 500 v (adjustable); receiver gain of 1x, 10x, 100x, auto, up to 1000x (lab+ model); pulse shape as square wave; measurement modes as pulse velocity, surface velocity, e-modulus, compressive strength correlation, crack depth; memory which stores >500 measured values; display should be 79x21 mm passive matrix oled; connectivity through usb for pc connection; software: pundit link for analysis and export. standards compliance

CTN :45334324

16 Jun, 2026 NA

Bilaspur - Chhattisgarh

Tender For corrigendum : e – tender for the purchase of medical equipment and furniture for state cancer institute, koni, cims bilaspur (c.g.), government of chhattisgarh - secretariat /executive officetable –rectangular - 16 slice c.t. simulator, digital x-ray machine with 10 year warranty & accessories, ultra sound machine with 10 year warranty & accessories, c-arm machine with 10 year warranty & accessories, hdr brachytherapy using at least 20 sources (co-60/ir-192), integrated usg and c-arm imaging system, hdr brachytherapy using co-60/ir-192 source- accessories,, spares, consumables & dosimetry, ot equipment, 1. mayo stand, 2. anaesthesia trolley (complete with ambu bags and other, items), 3. difficult airway trolley - bronchoscope, lmas and, intubating bougie, 4. anaesthesia machine & anaesthesia work station, 5. electrical suction, 6. laryngoscope with 5 blades (led), 7. defibrillator (aed plus manual with ecg), 8. surgical diathermy - bipolar, 9. ecg machine – high end multichannel, 10. bowl sterilizers - different sizes, 11.oxygen cylinder d. type, 12. washer disinfector, 13. blood warmer, 14. glucometer, 15. anaesthetic - laryngoscope magill’s with four blades, 16. endotracheal tubes: different sizes, 17. magill’s forceps (two sizes- adult & paediatrics), 18. e.t.t. and connector set of six, 19. catheter mount for connecting ett, 20. airway male & female - guedel oral airway (to be, provided as per need), 21. airway male & female - nasopharyngeal airway, 22. tongue depressors, 23. n2o cylinder for boyles-d type, 24.co2 cylinder for laparoscope, 25. spirometer, 26. exchange transfusion sets, 27. adult resuscitation kit, 28. neonate resuscitation kit (to be provided as per need), 29. emergency first aid kit (to be provided as per need), 30. multi para monitor (desirable anaesthesia work station, available in ot), 31. infusion pump, 32. syringe pump, 33. pressure bags for pushing blood during massive transfusion, 34. oxygen concentrator, 35. ot ceiling light double combination with centrally, mounted camera (quantity - 01 nos), ward equipment, 1. vital signs monitor (multiparameter), 2. bp apparatus (digital/manual), 3. thermometers (digital/infrared), 4. pulse oximeters, 5. glucometers + strips, 6. thermometers (oral, rectal, digital and ir), 7. stethoscopes, 8. weighing scales (adult, pediatric), 9. infusion pumps, 10.syringe pumps, 11. nebulizer machine, 12. ecg machine-6 channel, ecg roll(50 no), portable ecg, leads, & electrodes, 13. automated external defibrillator (aed), 14. manual defibrillator, 15. suction machine (portable & wall-mounted) with 100 no, suction tubes, 16. tourniquets, 17. ecg machine, 18. cpap/bipap machine, 19. bp apparatus digital, 20. fumigator, 21. needle cutter, 22. drug refrigerator, 23. dressing trolley, 24. crash cart, fully automatic rotary microtome, fully automated immuno histochemistry staining system, paraffin embedded station rt, high throughput robotic stainer, automatic vacuum tissue processor, fully automated slide stainer, digital colposcope, hospital furniture, 1. secretariat / executive office table –rectangular, 2. executive &revolving chair with high back, 3. executive &revolving chair with high back- ergonomic chair, 4. executive office table with side storage-rectangle/l shape, 5. executive &mesh-revolving chair with arms & mid back, 6. revolving chair, 7. special sofa 3 seater- tubular steel, 8. rectangular- modular centre table with glass top, 9. computer table with printer/copier/fax combination desk, 10. wall mounted & over head chamber type wooden, wardrobe, registration desk(01 no) & window display cum, counter rack- customized with all locking system- customized, 11. round wastepaper basket, made of steel, 12. white board(pt notes), 13. notice board, 14. whatnot/corner shelf, 15. clock, 12" diameter. round surface, 16. composite office desk, 17. wall mounted dressing mirror, 18. towel rack/rail, 19. hand drier- a

Central Government/Public Sector

CTN :45548108

23 Jun, 2026 NA

Avadi - Tamil Nadu

Tender For supply, installation and commissioning of digital diameter measuring device assembly for lefthand side and right-hand side to hyt drg.no.50.1009.106 & 50.1009.107 with encoder, display counter andoverall conduits for cable suitable to hyt make new generation under floor wheel lathe model no. nguf 25along with nabl calibration. (warranty:30months) [ warranty period: 30 months after the date of delivery ] ]

CTN :45543646

23 Jun, 2026 50.47 Lacs

Purnia - Bihar

Tender For supply of , frl 1 or 4 inch with pressure guage , quick exhaust valve 1 or 4 festo or norgen , quick exhaust valve 1 or 8 festo or norgen , spray,wd-40 cap- 400ml btl , cassette ss as per kosan carousel , guide rod for kosan introduction unit , 5 or 2 spring return valve , 1 or 2inch -f, ss ball valve , magnetic sensor , tepar strip for 90 deg bend , lock pin,chain conveyor duplex chain , switch,139a714,carousel kosncris - pressure switch , ejection puller arm , ejection pusher arm , needle valve , pneumatic cylinder 12mm or 16mm with fittings , shaft size- 40mm x 280 mm en-8 , shaft size- 40mm x 4000 mm en-8 , nut bolt 1.5inch x 10mm , nut bolt 1inch x10mm , f-mounting , ejection flexible coupling , pneumatic cylinder- 50 or 160- norgen or smc , toggle joint rod- lt-200 mm , pin of non-pneumatic filling gun , bearing no.6206 , bearing no.6304 , gas stop valve lpg 1 or 2inch , steel plate thick 10mm size 0.5mx0.5m , key pad for cuc card steel mk1v , key pad for cuc card mkii , anchor fastener length150mm dia 10mm gi , anchor fastener length150mm dia 12mm gi , anchor fastener length150mm dia 16mm gi , nut bolt length 1inch dia 6 mm , counter bolt 8mm, allenkey type, with lock nut , eye bolt for centering arm , spring,159a533,kosncris pt head , ss rod of gd or pt base , ss block of gd or pt base , linear bearing , optical cable for bar code sensor , automatic hot air sealing head , pneumatic cylinder size 500mmx50 norgan , 50 dia sealkit norgren , 50 dia sealkit janatics , solenoid coil for kosan filling scale- smc make , lpg hose of length 1 m , lpg hose of length 1.5 m , lpg hose of length 0.5 m , pencil sensor , rivet type conveyor chain , rod of kosan filling gun pneumatic type , kosan filling gun cup , dampner or kosan filling gun bush , kosan filling scale leg , lower bell for gd , vibration absorber for gd head , kosan fintec load cell for filling scale 200kg , load cell for jisl adjustment scale 650 kg , manual cvt head,kpot0122 carousel,kosncr , lifter plate for check scale , c channel of conveyor , telescopic boom pipe length 6m dia 1.5inch , drag chain , boom e plate with taflon ss thickness-10mm 1mx1m with taflon 12mm , mark iv display , reflector for kosan carousel , lpg filling gun pneumatic type , pneumatic counter , vacuum or suction indicator

CTN :45446505

22 Jun, 2026 NA

Deoghar - Jharkhand

Tender For corrigendum : rate contract for medicine - stainless steel abdominal hysterectomy set, n.s.v set (s.s), g.v set, self abdominal detractor, m.t.p set., vaccine carrier (small size), x-ray digitalisation with high-end cr system (with installation & 1 yers. warrenty) console software with mulitmodality work station the cr system should have advances workstation provided with 17" high resolution monitor, keyboard & ouse, with the fol., digital ultrasound machine colour dopler (high resolution ) with 4 probe, semi auto analyzer, fully automated bio-chemistry analyzertechnical specificationsthroughput-150t/hr (constant with both mono and double reagent)system function-random access/stat/batchtest method-end point, fix time, kinetic, (single/double reagents chemistry, mono/ bio-chromatic measurements)calculation methods-1 point linear, 2 point linear, exponential, logit log3p, logit log 4 p, logit log 5p, spline, line graph, k factorblank-reagent blank, sample blank, pre sample blank, pre reagent blanksample tray-40 position, sample volume :2-30 ui, 0.1 ul increment, micro cup, & test tube can be used for samplereagent tray-80 position, reagent volume: 20-300 ul, 1 ul incrementmixing system-teflon coated mixersample probe-1 needle with liquid detector, shock sensoroptics-halogen-tungsten lamp, absorbance range: 0-4.0 abs resolution: 0.0001 abs.diffraction photometry with wave length: 340, 405, 450, 505, 546, 578, 630, 700nm & 4 more optionswash station-12 step washing, 4 needle wash station, 1 dry pad, external needle cleaningcalibration-linear and non-linearqc-multi-level qc setup with levy-jennings graph and westgrads multi rules with mean sd, and cvwater consumption-not more than 6l/hrtemperature-reagent: 2-14 c (24 hr refrigeration), reaction cuvette: 37c 0.1 humidity- 80%system interface-usbpower requirement-ac 220v 10%, 50/60 hzdimensions-750 mm*560mm*530mm, hotair oven, binocular microscope (olampus), centri fuge machin (good quality), micropipette (0-50 microliter), micropipette (0-500 microliter), micropipette (0-1000 microliter), microtips (0-50 microliter), microtips (0-1000 microliter), bed side screen with cloth 1"round pipe with wheel, sponge holding (all size), artery forceps 6" curved, artery forceps 6" straight., artery forceps 8" curved, artery forceps 8" straight., artery forceps 4" straight., alliys tissue forcep (all size curved straight), mosquito forcep (all size curved straight), scissor 6 " curved (all size), scissor 6 " straight (all size), scissor mosquito straight. (all size curved, straight), diatheromy (machine), laparoscopic instrument full set (best quality), needle holder 8 "curved, needle holder 8 " straight, needle holder 6 "curved, needle holder 6 " straight, needle holder 4 "curved, needle holder 4 " straight, doner couch (3 motor), blood weighting mechine, blood band refrigerator (300 bag) temp.display outside, elisa reader with washer mechine with printer & ups., doner couch (3 motor), blood weighting mechine, blood band refrigerator (300 bag) temp.display outside ( best quality), fully automated chemiluminescence analyzer(clia) 1. system should be fully automated walk -away with continuous loading facility.2. analyzer should have able to perform thyroid, bone, cardiac, fertility, diabetes and anemia profile test.3. working principle of system should be micron super paramagnetic particles platform with alp labeled reagents and amppd substrate.4. must have 3 phase magnetic separation with precisely controlled temperature.5. analyzer should have photon counting detection mode with photomultiplier photo counter with led reference module.6. the analyzer must have vortex non-touch mixing which can reduce carryover., 7. throughput of the system should be more than 180 tests in a hour.8. system should have 15 reagents onboard with onboard 2 -8 nonstop refrigeration facility 9. system should have at least 50 sample positions and continuous loading facility.10. system should have cont

Central Government/Public Sector

CTN :45270567

17 Jun, 2026 NA

Mysore - Karnataka

Tender For corrigendum : supply of reception counter , storage attached to reception counter , work station with upper cabinet , conference table , display showcase , storage and display cabinets

corporations/Associations/Others

CTN :45498889

10 Jul, 2026 NA

Nashik - Maharashtra

Tender For supply of 42 tray gas rotary rack oven , 50 kg spiral or dought mixer , indian bread and rusk slice single mode , 30 lt imported planetary miixer or cake mix , electric small sandwich griller double mode , electric double tank fryer 6 plus 6 ltr , ss hot display counter 2 feet , vending machine for snacks22 inch touchscreen , 400gm bread mold with cap set of 3 , rusk mold with cap set off 5 , indian baking tray 13 x 18 x 1 , indian baking tray 13 x 18 x 2 , pav mold set of 3

Central Government/Public Sector

CTN :45502023

22 Jun, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot miscellaneous scrap - scrap condemned released wooden materials consisting following items such as- wooden windows, doors, damage wooden table, wooden chair, wooden rack, wooden box, wooden almirah, wooden broken table, wooden block counter, wooden sofa, wooden ladder, complaint box, name board, drawer, wooden benches, pedestal, podium, door panels, plywood, frame, cable drum wheels, wooden box trolley, sun mica, display board, cupboard, name board, wooden cover, stool, wooden tray, fire wood, examination table etc as per online ds-8 notes with m.s. attached if any.

Central Government/Public Sector

CTN :45225471

10 Jun, 2026 NA

Jhunjhunu - Rajasthan

Tender For corrigendum : supply of counter, 6 digit led display programmable counter , timer on delay range , zero speed switch , reed magnetic switch

CTN :45252334

11 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : supply of bed hard double , display show case with glass sliding shutters , sofa 3 seater cushioned , sofa set 5 seater , table dinning 6 persons , table dinning 8 persons , cupboards , hat and coat pegs , information sign board , office table , office chair executive , table computer , office chair , bar counter and cabin , chair pvc

Tipoy Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector