Latest tirfor Tenders | Government tirfor Tenders

Central Government/Public Sector

CTN :45715729

09 Jul, 2026 NA

Jhansi - Uttar Pradesh

Tender For tirfor type 8 ton pulling machine

State Government

CTN :45703159

30 Jun, 2026 NA

Ambala - Haryana

Tender For manhole chambers providing and fixing sfrc manhole covers and frames marked with is: 12592 including setting the same to correct lines and levels in 1:3 cement sand mortar over manhole including carriage loading unloading stacking handling re-handling etc. complete in all respects to the satisfaction to the engineer-in-charge. 1. type:- extra heavy duty set (ehd-35) 560mm clear opening, demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. 2. nominal concrete 1:2:4 or leaner mix (i/c equivalent design mix) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 2. 1:2:4 (1 cement : 2 coarse sand (zone-iii) : 4 graded stone aggregate 20 mm nominal size,providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 6. 1:4:8 (1 cement : 4 coarse sand (zone-iii) : 8 graded stone aggregate 40 mm nominal size), providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level : 1. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-iii): 3 graded stone aggregate 20 mm nominal size) , job work for cleaning of sewer lines by bucket type sewer machine including cost of diesel/lubricants complete in all respects. only sewer machines will be provided by the department for the following sizes of sewer: 1. 200 mm i/d

Central Government / Public Sector

CTN :45722690

13 Jul, 2026 NA

Sambalpur - Odisha

Tender For supply of portable hand operated gear less pulling and lifting machine (tirfor) complete set of 5.2ton pulling and 3.2ton lifting capacity (5.2/3.2 t) weight 21 kg, effort at full load 60 kg, rope travel per return stroke 30 mm approx with operating handle and wire rope of 16 mm diameter and 20 meter length with dee shackle at one end and tapered and fused at other end as per rdso specification no. ti/spc/ohe/toolpl/0992 (feb-2022) rev-2 or latest with test certificate and warranty certificate. [ warranty period: 12 months after the date of delivery ] ]

corporations/Associations/Others

CTN :45707236

02 Jul, 2026 50.00 Lacs

Porbandar - Gujarat

Tender For annual rate contract for supply of sanitation materials at, various area of porbandar. - malathion powder 5 percentage isi markmalathion dusting powder 5 percentage isi marked or equivalent approved standard, larvicidal oil (malaria control oil)suitable for anti-larval mosquito control operations in stagnant water bodies, drainsand breeding sites. material shall conform to applicable public health standards andshall be supplied in original sealed containers., fogging machine 6 kgsthermal fogging machine, chemical tank minimum 6 ltr, fuel tank minimum 1.2 ltr, output minimum 40 ltr/hour, complete with accessories.warranty : minimum 12 months, mask3 ply disposable face mask, non-woven fabric, adjustable nose clip, soft elasticear loops, adult size, suitable for sanitation and public health operations., gloves for daily use cotton hand gloves for sanitation workers, heavy duty pvc/rubber gloves for sanitation work, broom (long)technical specificationtype : coconut stick broom (long size)material : good quality dried coconut leaf sticksweight : minimum 500 gramslength : minimum 1200 mmstick length : uniform sizebinding : heavy duty gi wire / nylon cord bindinghandle : without handleconstruction : compact and firmly boundquality : free from rotten, broken, fungus affected or damaged coconut sticksmoisture content : dry and suitable for immediate useapplication : sweeping of roads (also on wet surface), footpaths, public places,open areas and general sanitation workdurability : suitable for regular municipal sanitation operationspacking : as per manufacturer/supplier standard packingacceptance criteriaweight shall not be less than 500 grams.loose binding, broken sticks, rotten material or poor workmanship shall not beaccepted.pmc reserves the right to verify weight and quality at the time of delivery, broom (long)technical specificationtype : coconut stick broom (long size)material : good quality dried indonesian coconut leaf sticksweight : minimum 500 gramslength : minimum 1200 mmstick length : uniform sizebinding : heavy duty gi wire / nylon cord bindinghandle : without handleconstruction : compact and firmly boundquality : free from rotten, broken, fungus affected or damaged indonesiancoconut leaf sticksmoisture content : dry and suitable for immediate useapplication : sweeping of roads (also on wet surface), footpaths, public places,open areas and general sanitation workdurability : suitable for regular municipal sanitation operationspacking : as per manufacturer/supplier standard packingacceptance criteriaweight shall not be less than 500 grams.loose binding, broken sticks, rotten material or poor workmanship shall not be accepted.pmc reserves the right to verify weight and quality at the time of delivery, broom (big)technical specificationtype : coconut stick broom (big size) with handlematerial : good quality dried coconut leaf sticksweight : minimum 300 grams (broom portion only)broom length : minimum 600 mmhandle material : seasoned wooden handle / bamboo handlehandle length : minimum 1200 mm (4 feet)handle fixing : firmly fixed with gi wire / nylon ropebinding : heavy duty gi wire / nylon cord bindinguniform and dense coconut sticksfree from rotten, broken, fungus affected or damaged coconut stickssuitable for main road sweeping, market areas, open grounds and generalsanitation workmunicipal grade qualitydurable and long lasting, safety jacket (universal size) safety green / orange reflective / yellow/ whitewith pmc marking on back side with minimum 6 inch height reflective printing., shovel (pavda) with handletype : heavy duty ms shovel (pavda)blade material : heavy duty msblade thickness : minimum 1.5 mmhandle material : hardwoodhandle length : minimum 900 mmfirmly fixed handlesuitable for garbage handling, silt removal and general sanitation workmunicipal grade quality, trikam with handletype : heavy duty trikam (pickaxe) complete with handlehead material : forged high carbon steel / drop forged steelhead weight : minim

Central Government/Public Sector

CTN :45513751

03 Jul, 2026 99.52 Lacs

Ahmedabad - Gujarat

Tender For corrigendum : supply of tirfor two pint five tor one point five t , tirfor 5t or 3 t , pull lift zero point seven five t or zero point eight t , ladder trolley suitable to move on railway track , earthing discharge rod complete , aluminium straight ladder extendable type , first aid box made of gi or al sheet , stretcher two fold type , set of 4 fire buckets of 10 l capacity , portable fire extinguisher dry chemical powder , portable fire extinguisher dry chemical powder type and suitably mounted on trolley , d shackeles set of alloy steel , set of steel slings with eye on each end , stainless steel digital micro meter , bench vice 6 inch suitably mounted on steel table , canvass tarpaulin 12m by 12m with ropes and spikes of adequate size , portable 5kva silent diesel gen set with battery push button start , binoculars , vernier calipers digital , digital multi-meter , high sensitivity digital multi-meter , aluminium self supporting stool type magjic pole ladder 8 feet long , drop out fuse pull rod made of fibre body extension type and suitable for use on 25 kv ohe , half inch square drive socket set containing 22 sockets with 5 attachments packed in power coated carrying case , transformer oil acidity testing kit with all accessories , portable arc welding machine 250 a capacity , clip on digital tong tester suitable for measuring ac current 600amp , digital breaker time interval meter , insulation megger with voltage selectable range of 250v and 500 v and 1000 v , supply of automatic transformer oil bdv testing kit , transformer oil filtration plant 125 litre per hour capacity , auto transformer which should be close type dimmer , load cell tester suitable for 40 ah and 200 ah battery , spanners set , 52 pieces socket set with storage case , insulation megger with voltage selectable range , supply of digital ground or earth tester , thermal imaging camera with software , fully automatic capacitance and tan delta test set , transformer oil as per is 12463 , ratchet lever hoist three point two ton , ratchet lever hoist one point six ton , universal come along clamp , extension ladder 2 by22 , pillar drill machine , bench grinder , portable welding generator set , industrial safety belts and harnesses , heavy duty contact wire cutter 36 inch suitable to cut copper contact wire 107 sq.mm , supply of dropper wire cutter size 12 inch. , single sheave pulley block wheel size three point five inch by half inch , single sleave pulley of fibre of size three point five by half , single sleave pulley blockof steel of size six by one , polyester slings with 1 tonne , double ply polyester webbing slings , ply polyesterwebbing slings with load capacity 3 tonne , polyester slings of 4 m and 10 m , supply of contact wire splicing jig suitable to splice 107 sqmm contact wire , angle cutter electric 355 , supply of 5 drill bits rotary hammer drill ndrf , fiber ladder of 11m and 8m , atd bearing removal tool , hydraulic crimping tool , spring loaded stabilizer auger type post hole digger , digital spirit level , single point laser class ii handheld digital infrared thermometer , hydraulic dyanamometer 10 ton capacity with steel carrying box , 4 stroke engine telescopic pole , digital camera , hand operated rotary barrel pump , chain pulley block 3 tonne capacity with standard lift 3 meter as per is 3832 , fibre body handheld electric blower , magic pole ladder 8 feet made out of aluminium side section , transformer oil sampling bottles, size 1500 millilitre in box. , contact resistance meters measuring range 100 milli ohm , digital lcr meter 3 one by two digit 1999 counts , supply //bid details 2 / 62 of magnetic drill machine with magnetic stand , rechargebale portable battery operated hand cutter

CTN :45468027

29 Jun, 2026 NA

Jammu - Jammu And Kashmir

Tender For bid to ras supply of floor trap of 75mm dia with grating , pvc swr gully trap of size 110mm dia , pvc pipe 100mm bore 20ft long , pvc swr 110 mm dia pipe with three socket , stainless steel storage racks , stainless steel serving platform , stainless steel vegetable cutting table , preparation table , deep freezer of 200 ltr capacity , grill cage , chula , dining table , dining chair , synthetic enamal paint dark brown 4ltr pack , synthetic enamal paint og 4ltr pack , thinner , painting brush 50mm , painting brush 100mm , painting brush 125 mm , cement base paint weather proof , gi plate 600mm x 600mmx 6mm thick , ci cover of size 290 x 290 x 6 mm , glpipe 40 mm dia medium grade 04 m , gi strip of size 25 x4 mm 08 m , salt , ms funnel with wire mesh 01 no , gi pipe 20mm dia med grade , gi reducer 40 x 20 mm isi marked , ms rod 6 mm dia 2 long , charcoal dust , 5 mm dia 30 mm long gi bolt with nut , air termination single pointed copper rod 12mm dia and 300mm long , gi pipe 100mm dia 2 m lomg medium grade with base plate , back fill compound , ci manhole cover of size 30cm x 30 cm with handles , aluminium strip 25 x 3 mm , gi strip 32 x 6 mm rm 03 , insulator for fixing down conductors as per relevent is 25 nos , vitrified floor coloured tiles , anti skid coloured floor tiles , perforated type gypsum board false ceiling panel , kota stone flooring 25 mm thick , mild steel chromium plated 25 mm dia and 3mm thickness drapery rod , integral water proofing compound , white or coloured cement to match the floor finishes surface , fire extingusher one kg capacity , drill bits 3 mm size , drill bits 6 mm size , drill bits 8 mm size , drill bits 10 mm size , drill machine high speed heavy duty qty , hacksaw frame with 5 bladeboth side teeth , screw driver blade length 300 mm, blade dia 6 mm qty , hammer , magnetic nut setter of size 8mm , parthal wooden planks for shuttering , circular tile cuting machine with 5 blade , panel steel cuting dimond blade , aluminium planer for mason , brick trowel , brick hammer , insulated plair side cutting 250 mm , measuring tape 30 mtr long , water level pipe l equal to 20 mtr qty , bonding adhesive , mild steel material handling trolley

corporations/Associations/Others

CTN :45698831

14 Jul, 2026 NA

Thiruvananthapuram - Kerala

Tender For auction sale of mixed scrap items,aluminium foil and aluminium scrap,copper foil and copper scrap,mixed chips and aluminium, ss and ms,e- waste items,plastic scrap of various sizes,forklift truck,5 ton capacity voltas diesel forklift,8 ton capacity godrej diesel forklift,fabrication waste aluminium,fabrication waste mixed steel (ms, ss, al etc),mixed chips (ferrous and non ferrous,transformer along with terminal connectors (6 nos),vacuum transformer oil conditioning plant,3 ton hot crane,ms barrels of 210 l cap,dismantled parts of single grider 5 ton eot crane,15t old material handling crane (5 pieces),unservicable mechanical items,hmt lathe,cnc edm machine,titanium scrap (mesh, chips and tubes)

Central Government/Public Sector

CTN :45702769

03 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond. and u/s tools scrap such as double end spanner, adjustable spanner, die spanner, monkey spanner, ring spanner, t spanner, box spanner and all types of spanners, allen keys, cutting pliers,handoperated oil pump, screw driver, hacksaw frame & blades,hand cuffs,cash chest,hammer ball,hardness tester,, slege hammer, nose pliers, pipe wrench,ball pen hamer,cutting piler,chisel long/short,torque wrench,electrical tools, instruments, gauges with or without wooden handles,adjustable tie rods,allenkeys.allen bolt bor lhb,double leg chain,flat file,high tensile bolt,hydraulic nut,hallow adopter for dm,hand hoe,shovel,adjustable tie rod,ratchet type torque wrench,single pully block,motor pan iron,fth pipe,carbide tipped tools,steel lettr punch, pulllift,allenkey,allen socket,box spanner tubular and other,foot ruler,measuring tape,open jaw spanner,ring spanner,ratchet box,spirit level,screw driver,screw fixing cgr,vice grip plier,pulley block single sheave, hand operated pulling and lifting machine,grease gun,punches,hand crimping, bi hexagonal socket, water pump pliers, wrench coach double pliers, faring tool, hand barrel pump, hydraulic crippling tools,sledge hammer,pipe wrench, defective damaged iron tools,counter weight, , chisels,manual weighment tripod, pull lift with or without chain, weighing buds, tirfor, come along clamp, scale counter w/o nfs, torque wrench and all types of wrenches, augars, bearing puller,oil can,weight metric, iron plair, beater, crow and claw bars, mamooty,manual tripod weights, manual weighning scale, hydraulic pallet truck,ht vcb panel and lt panel released items, barrel pump, tommy bar,ratchet, tong smith, chiesel,hydraulic jack trolley, jig saw blade, circular saw blade, scissor, hooks, measuring canes, pneumatic riveting gun, drill sleeve, tool holder, inside, outside micrometres, all types of gauges,fire buckets,fire bucket stand, handle tap,platofrm trolley, grease gun adopter, spikes extractor, metric weight with handle, steel letter punch and all types of punches, all types of files, pulley puller , blower, hand driller of sorts and sizes and all other scrap tools received from different departments in ferrous nature with/without attachment of wood/plastic handle. pl.no. 98090616. custodian: cdms-rsf-gsd-per. note: 1) any aluminium/brass items or hss tools(drill bits/saw) found during delivery should be handed over to custodian. 2) empty barrels/boxes/containers, gi/any locks, electronic weighing machine, should be handedover to the custodian. location: (1)entrance of old rsf ward annexe,(2)old rsf ward annexe(rhs)

corporations/Associations/Others

CTN :45626060

29 Jun, 2026 2.38 Crore

Guntur - Andhra Pradesh

Tender For procurement of equipment and machinery for establishment of footwear manufacturing unit at yadavalli (v), racherla (m) of prakasam district and at vellaturu (v), g.konduru (m) of ntr district, estimate cost: rs. 254.20 lakhs - beam clicking machine, swing arm clicking machine, cutting board, high speed single needle stitching machine, high speed double needle stitching machine, zig zag stitching machine, binding machine, string lasting machine, hot melt spray machine double station, eyelet fixing machine, tape cutting machine, pvc air blow injection moulding machine 24 station, slow speed mixer, grinder cutter, string lasting machine, heat setter, chiller 5 ton capacity, abrasion tester, bond testing machine, cooling tower, servo voltage stabilizer 75 kva, air compressor 10 hp, hydraulic oil grade 68, electrical fittings and installation, water fittings and installation, electrical control panel, air fittings and installation, weighing machine, material handling trolley, carton strapping machine, pvc footwear mould, beam clicking machine, swing arm clicking machine, cutting board, high speed single needle stitching machine, high speed double needle stitching machine, zig zag stitching machine, binding machine, string lasting machine, hot melt spray machine double station, eyelet fixing machine, tape cutting machine, pvc air blow injection moulding machine 24 station, slow speed mixer, grinder cutter, string lasting machine, heat setter, chiller 5 ton capacity, abrasion tester, bond testing machine, cooling tower, servo voltage stabilizer 75 kva, air compressor 10 hp, hydraulic oil grade 68, electrical fittings and installation, water fittings and installation, electrical control panel, air fittings and installation, weighing machine, material handling trolley, carton strapping machine, pvc footwear mould

Central Government/Public Sector

CTN :45450535

22 Jun, 2026 25.00 Lacs

Sonbhadra - Uttar Pradesh

Tender For corrigendum : name of the work / . contract no: - scope of work/technical specifications etc.1. up keeping, cleaning work of 88.8 sqm area (22.20 sqm area/day/machine) of machine housing, operator cabin, undercarriage track chain and rollers mud etc. of 04 nos. hydraulic shovels (be700, tata hitachi zx650h sl no.001166 and pc2000-8 sl no.1 & 2) working at khadia project for a period of 365days.2. material handling of lubricants barrels, loading and unloading of 04 nos. hydraulic shovels (be700, tata hitachi zx650h sl no.001166 and pc2000-8 sl no.1 & 2) and 02 nos. surface miners working at khadia project for a period of 365days. 3. assistance in repair and maintenance work in all the three shifts including general shift of 02 nos. surface miners, running under marc. note: maximum deployment of manpower for the above scope of work likely to be 1. semi-skilled for 730 nos. of manshift & un-skilled for 2555 nos. of manshifts.standard terms & conditions- all the safety materials (safety helmet, safety shoes, gloves and other safety equipment s) are to be provided / arranged by the contractor., labour charges for material handling & cleaning works of hydraulic shovels and surface miners as per scope of work including contractor profit., labour charges for assstance in maintenance and repair work of 02 nos surface miners running under marc including contractor profit., total impact of gst for the purpose of ctc

Tirfor Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors