Latest titanium alloy Tenders | Government titanium alloy Tenders

Central Government/Public Sector

CTN :40574190

09 Jun, 2025 NA

Chennai - Tamil Nadu

Tender For supply of one coach set of underframe details (cross member assy,stiffeners etc) for train set mc,ndtc and tc coaches to drg nos. 1) 72711024, alt. "a" - 2 nos, 2) 72711025, alt. "a " - 2 nos, 3) 72711026, alt 'c '- 2 nos, 4) 72711027, alt 'c' - 2 nos, 5) 72711028 - 2 nos, 6) 72711029 - 2 nos, 7) 72711015, alt 'a'- 12 nos, 8) 72711016, alt 'a'- 12 nos, 9) 72711030 - 2 nos, 10) 72711031 - 2 nos, 11) 72711033 - 2 nos, 12) 72711034 - 2 nos, 13) 72711035, alt 'a' - 2 nos, 14) 72711036, alt 'a' - 2 nos, 15) 72711037 - 2 nos, 16) 72711038 - 2 nos, 17) 72711039, alt 'a' - 2 nos, 18) 72711040, alt ' a' - 2 nos, 19) 72711041, alt 'a' - 2 nos, 20) 72711042 - 2 nos, 21) 72711077 - 4 nos, 22) 72711078 - 4 nos, 23) aae11764 - 4 nos, 24) aad11701 alt 'b' - 2 nos, 25) aae11192 - 4 nos, 26) aae11102 - 2 nos , 27) aae11101 alt 'a' - 4 nos, 28) aad11946 - 4 nos, 29) aad11945 - 4 nos, 30) aad11944, alt-'a' 4 nos, 31) aad11951, alt-'b' - 2 nos, 32) aad11950, alt-'b' - 2 nos, 33) aad11964 - 4 nos, 34) aad119 55, alt 'a' - 2 nos, 35) aad11526, alt 'a' - 20 nos. special condition : finished components except s s components shall be thoroughly cleaned and applied with epoxy zinc phosphate prime r as per rdso/spec no.m&c/pcn/100 latest---- to a dft of minimum 60 microns and mdts-094 (latest) shall be followed. for procedure and colour shade excluding the areas as spe cified in detail drawings.---- all the items are to be supplied as coach set only. suitable p acking to be done to prevent damage during transit, unloading and rust prevention du ring storage. [ warranty period: 30 months after the date of delivery ]

CTN :40591689

11 Jun, 2025 NA

Multi City - Multi State

Tender For supply of k- fixator system each containing connecting rod- titanium alloy 2 pcs -k- fixator peducular s crew (4 mm dia) titanium alloy with connector 4 pcs with plif cage. [ warranty period: 24 months after t he date of delivery ]

State Government

CTN :40560629

23 Jun, 2025 NA

Amravati - Maharashtra

Tender For supply of laboratory equipments /laptop/printer - flash chromatography system model a1700x-200ml yamazen carporation, japan make, programmable elution modes: isocratic step, linear & rf gradient, pumping flow rate: 5-200 ml/min, maximum pressure: 1.5 mpa (15 bar/217 psi), no. of solvents: use up to 4 solvents in a gradient, uv detection: dual variable wavelength pda uv vis, detector 200-800 nm,uv detector sensitivity: 0.02-10.24 saufs, fractionation modes: time manual, peak, peak& slope (valley)02, automated densitometer with 4 reading channelsmake- genaxy/thistle/cleaverdensitometer a universal densitometer scanner with software capable of reading 144test per min. is available for band quantitation following post electrophoresis staining ordering information-cell as gel application packages equipped with bridges applicator and clinical test kit, 1x4 -specimen semi micro applicator volume applied sample band with compatible strip size: 5.7x14cm, cell as gel wet membrane bridges and densitometer, 1x8.5 cm bridge for 1x5.7x7x14cm or 2x2.5x14cm cell as gel. strip cat no. cslbg8.55 terbo scan software densitometer (excludes computer and scanner) cat no. csldens flat belt scanner for turbo scan software cat no. csscan, uv transilluminatormake- genaxy/thistle/cleaverresearch model: 312nm single wavelength transilluminator for detection of more than 0.1 ng of dna filter area (cm) uv 20 x 20cm , analytical balance make- aczet/radwag/sartoriuscapacity :220gm readability : 0.1mg repairability: 0.2mg response time: 2-3 sec pan size : 90mm display: lcd backlite calibration : motorized internal calibration, probe sonicator (touch screen) with sound proof enclosure make-labman/aczet/sonic temperature indicator and controller touchscreen display - 4.3 inches tft user password protection available microprocessor controlled and completely programmable. large lcd display with time setting. auto-tuning for convenience and optimal processing efficiency. variable power output control. auto frequency tracking output amplitude 0-100% adjustment. automatic fault alarm. frequency 20-25khz-automatic tracking process capacity 0.5-500ml (approx.) probe dia (titanium alloy) standard 6mm (1/4") display 4.3 inches tft display function temperature, power, time, etc. temperature range( c) 0-99 c timer (selectable) yes overload protection yes user password protection available input method touch screen control, data memory 20 groups output power 6.5-650w (adjustable) power supply : ac 220v/50hz, pulveriser/grinder make-ideal/mac/amccommercial dry grinder are used for grinding different types of products like spices, fresh ginger, salt, sugar, leaves, herbal products, cattle and poultry feeds, icing sugar, custard powder, instant food, food colors and allied food production. 3 hp motor deluxe model camber size: 10 x 5 cm. capacity: 20-25kg./hr., decoction apparatus gas operated decoction making machinemake-ideal/mac/amcvessel capacity: 15 liters for 1 to 5 lit production capacity, motor: /1 hp single phase motor fuel: lpg (fitted with i no. burners) all contact parts in 304 grade stainless steel complete structure in mild steel ready to use with all standard accessories wi s.s. bucket 10 ltr., s.s. mesh, & s.s. round tank, cooling centrifuge make-remi/eppendrof/thermo programable compensation for true sample temperature: yes pre cooling: yes acceleration profiles: 9 deceleration profiles: 9 & coasting fast spin: yes display: lcd control communication: digital parameters setting switches: bi-directional encoder brushless motor with frequency drive: yes inverter fault detection with auto shut down: yes cfc free refrigeration system: yes no. of programs: 99 last set parameters recall: yes choice of rpm/ref setting: rpm/rcf digital countdown timer 0-99 min & continuous run: yes automatic rotor identification: yes emergency lid lock release: yes password protection: yes gas hinge to prevent door falling: yes imbalance detection with centrifugatio

CTN :40561617

16 Jun, 2025 40.00 Lacs

Bikaner - Rajasthan

Tender For ortho implant items supply - ortho implant, cruciate retaining (cr) tkr(with cocr femoral component tibia base plate (titanium/cocr), vitamin e enriched polyethylenee liner (regular cr/ultracongruent) and all poly patella, posterior stabilized (ps) tkr(with cocr femoral component , tibia base plate (titanium/cocr), vitamin e enriched polyethylene stabilized liner and all poly patella button)., revision tkr semi constraint total knee prosthesis including femoral component + constrained poly+ tibia + tibial rod), tibial component with ability to accept various offset and sizes tibial (augmentation blocks), wedges & offset extension,, semi constraint tibial knee inserts -all sizes, metal tibial wages-step, hemi & full of various sizes and thickness, tibial extension stem-various offset & sizes for cemented and uncemented, partially coated, thr (uncemented metal on poly ), primary uncemented partially/fully coated femoral stem (titanium alloy)-12/14 taper, collared and collarless option reduced lateral shoulder taper, wedge type, with a option of variable high offsets and various size. thickness of coating (135mm to 180mm), stem sizes (0 to 9), stem tip rounded. metal head metal femoral head is made from highly polished cobalt chrome alloy (cocr) comes with 28,32,36mm options and has a 12/14 taper, attach to a corresponding tapered femoral stem and articulates with a polyethylene liner with modularity in head size with neck length at least 4. uncementedacetabular cup component titanium porous coated (pore size 200-300 micron) (thickness of coating 140 to 180mm) acetabular hemispherical uncemented component with tapered locking mechanism for liner multiple locking screws options od-38 to 64mm with 2mm of increment acetabular highly crosslinked poly cup highly crosslink polyethylene option of neutral, 10*lpw, lateralized liner. 6.5 mm self tapping cancellous titanium screws for acetabular cup (uncemented cup size 42 to 68 size cup), thr (uncemented ceramic on poly), primary uncemented partially/fully coated femoral stem (titanium alloy)-12/14 taper, collared and collarless option reduced lateral shoulder taper, wedge type, with a option of variable high offsets and various size. thickness of coating (135mm to 180mm), stem sizes (0 to 9), stem tip rounded. ceramic head- comes with 28,32,36mm options and has a 12/14 taper, attach to a corresponding tapered femoral stem and articulates with a polyethylene liner with modularity in head size with neck length at least 4. uncementedacetabular cup component titanium porous coated (pore size 200-300 micron) (thickness of coating 140 to 180mm) acetabular hemispherical uncemented component with tapered locking mechanism for liner multiple locking screws options od-42 to 68mm with 2mm of increment acetabular highly crosslinked poly cup highly crosslink polyethylene option of neutral, 10*lpw, lateralized liner. 6.5 mm self tapping cancellous titanium screws for acetabular cup (uncemented cup size 42 to 68 size cup), thr (cemented metal on poly), cemented femoral stem, double tapered)- 12/14 taper,collarless, reduced lateral shoulder taper, wedge type metal modular head 28mm, 32mm, 36mm, (12/14 taper) with at least 4 variable neck length cemented 10 acetabular cup with lpw various sizes lpw cemented acetabular cup femoral cement restrictor femoral cement centerlizer with disposable cement gun & pulsatile lavage., thr (hybrid metal on poly), cemented femoral stem(titanium alloy, double tapered)- 12/14 taper,collarless, metal modular head 28mm, 32mm, 36mm. (12/14 taper) with at least 4 variable neck length uncementedacetabular cup component titanium porous coated (pore size 200-300 micron) (thickness of coating 140 to 180mm) acetabular hemispherical uncemented component with tapered locking mechanism for liner multiple locking screws options od-38 to 64mm with 2mm of increment acetabular highly crosslink polyethylene cup liner (28/32/36 mm id) with 10 option and various sizes femora

CTN :40539961

20 Jun, 2025 NA

Pithoragarh - Uttarakhand

Tender For supply of complete stores for living shelter 16 men fems - main columns will be made of 100m x 100m x 4mm square section of 3 length , wind breaker columns c1 will be made of 80mmx40x3 point 2 mm rhs 2 x 2 point 70 mtr and 2x2 point 40 mtr , purlin should be made of rhs 80 x 40 x 2 point 9mm of length 2 point 60 mtr and 2 nos purlin of size 80x40x2 point 9mm of length 1 point 5 mtr for wind braker , truss made of rhs main member of 80x40x2 point 9mm , runner of length 2 point 53 mtr and 04 nos gable side runner of length 2 point 40 mtr made of shs 40x40x3 point 2mm , pedestal of height zero point 30 mtr made of shs 150mmx150mmx6mm , wind breaker a cabin of size 1500mm x 1500mm made of 4 nos ms square tube 80mmx40mmx3.2mm and hight 02 nos 2 point 70 and 2 nos 2 point 40 ht with 60mm thick puf panel , double bunks ms of size 1930mm x 930 x 1840 at leg side and 910mm hight with 02 nos mattress with each bunk , ladder shall be provided on kg side in between long rial connecting lower bunk and upper bank , mattress smart ortho mattress ultimate back pain relief of size 1890mm x 800mm , all nuts and bolts used for joining the structural members shall be of high quality and varieties of bolts as per specification , sun shade for door and window openings will be provided with 450mm wide sun shade made out of same material as of roof sheets matching with roof colour as per technical specification documents , suitable flashing with zero point 6mm thick pre coated sheet of matching colour with panels will be provided at all joints between roof and wall corners as per specification , lightning conductor made of copper tube 150cm long x 25 mm dia with five copper prongs of length 15cm each fixed to copper ball of dia 50mm and 4mm thick with securing arrangement , earthing of building provided using 3mm dia gi earth wire connecting to main board to gi earth plate of size 60cm x60cm 6mm thick , lower outer frame rhs 80mm x 40mm 2.9mm thick and having two through holes at each end to enable suitable fitting of u clamp on the bushing system at the columns , lower gable outer frame rhs 80mm x 40mm x 2 point 9mm thick and having two through holes at each end to enable suitable fitting of u clamp on the bushing system at the columns , lower cross tie beam rhs 66x33x2 point 9mm has to be fitted with the columns in the u channel fitted at the lower side of the columns , floor panel 6 mm thick vinyl sheet of approved colour over 18mm thick bwp oblique bwr isi ply board shall be shall be provided for floor , pedestals will be made of 150x150x6mm sections of height 300mm with base plate of size 400x400x 12mm , foundation for all pedestals will be of pcc 1 2 4 type b1 20mm graded stone aggregate of size 450x450x900mm over the sub base 100mm thick pcc 1 4 8 using 40mm graded stone aggregate , field heating device , sleeves for field heating device as per specification , peg sets will be provided stainless steel premium fesue dual edge 8 pin cloth hanger bathroom wall door hooks , curtain rods for all openings of doors and windows of shelter will be provided with drapery rods made of 25mm dia , looking mirror of size zero point 5 x 1 point 65mm with wooden frame , iron foot scrapper for size 600mm x 450mm will be provided for entrance doors , iron foot mat for size 1200mmx900mm comprising of internal wire mesh of gauge 18 swg will be provided for entrance doors , all electric items shall be isi marked as per specification , stainless steel shoe rack and shoe stand and multipurpose stand of 31x24 inch , swing open to top dust bin stainless steel 12x28 inch 50l , supply only transitional end table with open shelvees size 24x22x18 inch , stainless steel heavy duty double pole 3 lalyer foldable and moveable prince jumbo cloth drying stand brc 786 ss grey , ordinary portland cement grade 43 and is 12269 to 1990 and packed in 50 kgs hdpe bags , coarse sand , stone aggregate shall be crushed stone 20mm graded conforming to is 383 1970 , stone aggregate shall be

CTN :40540699

20 Jun, 2025 NA

Pithoragarh - Uttarakhand

Tender For supply of complete stores for living shelter 16 men fems - main columns will be made of 100m x 100m x 4mm square section of 3 length , wind breaker columns c1 will be made of 80mmx40x3 point 2 mm rhs 2 x 2 point 70 mtr and 2x2 point 40 mtr , purlin should be made of rhs 80 x 40 x 2 point 9mm of length 2 point 60 mtr and 2 nos purlin of size 80x40x2 point 9mm of length 1 point 5 mtr for wind braker , truss made of rhs main member of 80x40x2 point 9mm , runner of length 2 point 53 mtr and 04 nos gable side runner of length 2 point 40 mtr made of shs 40x40x3 point 2mm , pedestal of height zero point 30 mtr made of shs 150mmx150mmx6mm , wind breaker a cabin of size 1500mm x 1500mm made of 4 nos ms square tube 80mmx40mmx3.2mm and hight 02 nos 2 point 70 and 2 nos 2 point 40 ht with 60mm thick puf panel , double bunks ms of size 1930mm x 930 x 1840 at leg side and 910mm hight with 02 nos mattress with each bunk , ladder shall be provided on kg side in between long rial connecting lower bunk and upper bank , mattress smart ortho mattress ultimate back pain relief of size 1890mm x 800mm , all nuts and bolts used for joining the structural members shall be of high quality and varieties of bolts as per specification , sun shade for door and window openings will be provided with 450mm wide sun shade made out of same material as of roof sheets matching with roof colour as per technical specification documents , suitable flashing with zero point 6mm thick pre coated sheet of matching colour with panels will be provided at all joints between roof and wall corners as per specification , lightning conductor made of copper tube 150cm long x 25 mm dia with five copper prongs of length 15cm each fixed to copper ball of dia 50mm and 4mm thick with securing arrangement , earthing of building provided using 3mm dia gi earth wire connecting to main board to gi earth plate of size 60cm x60cm 6mm thick , lower outer frame rhs 80mm x 40mm 2.9mm thick and having two through holes at each end to enable suitable fitting of u clamp on the bushing system at the columns , lower gable outer frame rhs 80mm x 40mm x 2 point 9mm thick and having two through holes at each end to enable suitable fitting of u clamp on the bushing system at the columns , lower cross tie beam rhs 66x33x2 point 9mm has to be fitted with the columns in the u channel fitted at the lower side of the columns , floor panel 6 mm thick vinyl sheet of approved colour over 18mm thick bwp oblique bwr isi ply board shall be shall be provided for floor , pedestals will be made of 150x150x6mm sections of height 300mm with base plate of size 400x400x 12mm , foundation for all pedestals will be of pcc 1 2 4 type b1 20mm graded stone aggregate of size 450x450x900mm over the sub base 100mm thick pcc 1 4 8 using 40mm graded stone aggregate , field heating device , sleeves for field heating device as per specification , peg sets will be provided stainless steel premium fesue dual edge 8 pin cloth hanger bathroom wall door hooks , curtain rods for all openings of doors and windows of shelter will be provided with drapery rods made of 25mm dia , looking mirror of size zero point 5 x 1 point 65mm with wooden frame , iron foot scrapper for size 600mm x 450mm will be provided for entrance doors , iron foot mat for size 1200mmx900mm comprising of internal wire mesh of gauge 18 swg will be provided for entrance doors , all electric items shall be isi marked as per specification , stainless steel shoe rack and shoe stand and multipurpose stand of 31x24 inch , swing open to top dust bin stainless steel 12x28 inch 50l , supply only transitional end table with open shelvees size 24x22x18 inch , stainless steel heavy duty double pole 3 lalyer foldable and moveable prince jumbo cloth drying stand brc 786 ss grey , ordinary portland cement grade 43 and is 12269 to 1990 and packed in 50 kgs hdpe bags , coarse sand , stone aggregate shall be crushed stone 20mm graded conforming to is 383 1970 , stone aggregate shall be

CTN :40512961

12 Jun, 2025 20.00 Lacs

Kuchaman - Rajasthan

Tender For orthopedic implant thr tkr trauma - hip replacement set (all thr implants/items should be same make), total knee arthroplasty posterior stabilized (ps) tkr- vitamin e enriched polyethylene option should be there1)femur should be having 7 radii design with thin anterior flange.2) femur should have 6 degree deep trochlear groove with asymmetrical cam & spine mechanism for rotation upto 15 degree.3)cocr alloy tibia with a 5 point locking mechanism.4) ram extruded vitamin-e poly, uhmwpe, gur 1020, cruciate retaining (cr) tkr(with cocr femoral component tibia base plate (cocr), uhmwpe liner (regular cr/ultracongruent) and all poly patella, posterior stabilized (ps) tkr(with cocr femoral component , tibia base plate (cocr), uhmwpe stabilized liner and all poly patella button)., cruciate retaining (cr) tkr, all poly monoblock uhmwpe tibia and all poly patella button) with option of anterior an posterior referencing ., posterior stabilized (ps) tkr(all poly) (with cocr femoral component, all poly monoblock uhmwpe tibia and all poly patella button), revision tkr semi constraint total knee prosthesis including femoral component + constrained poly+ tibia + tibial rod)tibial component with ability to accept various offset and sizes tibial (augmentation blocks), wedges & offset extension,semi constraint tibial knee inserts -all sizes metal tibial wages-step, hemi & full of various sizes and thickness tibial extension stem-various offset & sizes for cemented and uncemented, partially coated, - revision tkr hinged total knee prosthesis, thr (uncemented metal on poly ), primary uncemented partially/fully coated femoral stem (titanium alloy)-12/14 taper, collared and collarless option reduced lateral shoulder taper, wedge type, with a option of variable high offsets and various size. thickness of coating (135mm to 180mm), stem sizes (0 to 9), stem tip rounded. metal head metal femoral head is made from highly polished cobalt chrome alloy (cocr) comes with 28,32,36mm options and has a 12/14 taper, attach to a corresponding tapered femoral stem and articulates with a polyethylene liner with modularity in head size with neck length at least 4. uncementedacetabular cup component titanium porous coated (pore size 200-300 micron) (thickness of coating 140 to 180mm) acetabular hemispherical uncemented component with tapered locking mechanism for liner multiple locking screws options od-38 to 64mm with 2mm of increment acetabular highly crosslinked poly cup highly crosslink polyethylene option of neutral, 10*lpw, lateralized liner. 6.5 mm self tapping cancellous titanium screws for acetabular cup (uncemented cup size 40 to 70 size cup), thr (uncemented ceramic on poly), primary uncemented partially/fully coated femoral stem (titanium alloy)-12/14 taper, collared and collarless option reduced lateral shoulder taper, wedge type, with a option of variable high offsets and various size. thickness of coating (135mm to 180mm), stem sizes (0 to 9), stem tip rounded. ceramic head- comes with 28,32,36mm options and has a 12/14 taper, attach to a corresponding tapered femoral stem and articulates with a polyethylene liner with modularity in head size with neck length at least 4. uncementedacetabular cup component titanium porous coated (pore size 200-300 micron) (thickness of coating 140 to 180mm) acetabular hemispherical uncemented component with tapered locking mechanism for liner multiple locking screws options od-42 to 68mm with 2mm of increment acetabular highly crosslinked poly cup highly crosslink polyethylene option of neutral, 10*lpw, lateralized liner. 6.5 mm self tapping cancellous titanium screws for acetabular cup (uncemented cup size 42 to 68 size cup), thr (cemented metal on poly), cemented femoral stem, double tapered)- 12/14 taper, collarless, reduced lateral shoulder taper, wedge type metal modular head 28mm, 32mm, 36mm, (12/14 taper) with at least 4 variable neck length cemented 10 acetabular cup with lpw various sizes lpw cem

Central Government/Public Sector

CTN :40491705

17 Jun, 2025 NA

Bangalore - Karnataka

Tender For supply of 1.6mm thick titanium alloy sheet , 2.0mm thick titanium alloy sheet

CTN :40473165

23 Jun, 2025 NA

Liluah - West Bengal

Tender For supply of cross member as per drg. no. llh-22/2021, alt.1, item no.-15 (safety item). material specifi cation: irs m-41-97. [ warranty period: 30 months after the date of delivery ]

CTN :40473166

23 Jun, 2025 NA

Liluah - West Bengal

Tender For supply of cross member as per drg no. 2.10113.1.03.100.176, alt.r attached. [ warranty perio d: 30 months after the date of delivery ]

Titanium Alloy Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector