Latest titanium rod Tenders | Government titanium rod Tenders

Central Government And Public Sector

CTN :45343127

05 Jun, 2026 NA

Raipur - Chhattisgarh

Tender For auction sale of others - released unserviceable wagons components brake cylinder (bc) and bogie end pull rod only.

CTN :45072246

29 May, 2026 55.70 Lacs

Pune - Maharashtra

Tender For corrigendum : supply of neurosurg consumables d510 dglp d d - antibiotic impregnated vp shunt , programmable vp shunt , oxidised regenerated cellulose size 2 x 3 box of 10 , oxidised regenerated cellulose size 4 x 8 box of 10 , surgicel fibrillar size 2 inch x 4 inch, box of 10 , absorbable porcine gelatin sponge, box of 10 , shunt drape adult , lumber spinal pack , philadelphia collar assorted size , taylors brace , soft cervical collar assorted size , lumbo-sacral belt assorted size , craniofix titanium clamp 16 mm , craniofix titanium clamp 20mm , titanium mini plate 4 hole , self drilling mini screw for cranioplasty 1.5 x 5 mm , self drilling mini screw for cranioplasty 1.5by 7mm , cervical disc prosthesis , prebent occipital cervical rod titanium , cross link connectorcervical with clip , occipital cervical plate large , c1 c2 plate18x4 mm set of two , screws for c1 c2 plate 3.5 x 18mm , percutaneus cannulated pedicle mas screw 5.5 by 40 mm , percutaneus cannulated pedicle mas screw 5.5 x 45mm , percutaneus cannulated pedicle mas screw 5.5 by 50mm , percutaneus cannulated pedicle mas screw 6.5 by 45 mm , straight rod 5.5 mm length 120 mm for percutaneus screw , pedical screw contoured titanium rods 5.5 x 500 mm , expandable transverse cross connector with screws , tubing set disposable for ultrasonic aspirator , stylet 2 coil single package , pointer navigation axiem , burr tool f2 bta23 legend 8cm 2.3 mm taper , tool mr8-7ta11mr87cm taper 1.1 mm , tool mr8-14ba20d mr8 14cm ball dmd 2mm , tool mr8-sp 14ba30 mr8 14 cm sp ball 3 mm , cervical titanium expandable carpectomy cage 28- 36 mm , cervical titanium expandable corpectomy cage 20 mm , medicated iodine impregnated incise drape set , cervical peek cage 8 by 11 by 14mm , cervical peek cage 6 by 11 by 14mm , cervical peek cage 7 by 11 by14 mm , cervical plate 18 mm with four self drilling screws , cervical plate single level 12 mm , cervical plate single level 10 mm , cervical plate single level 14 mm , cervical plate single level 16mm , floseal hemostatic matrix , 3d printed customised titanium cranial implant , ommaya reservoir large , fibrin glue 2ml , craniofix titanium clamp 11mm //bid details 2 / 44

CTN :43648866

28 May, 2026 55.67 Lacs

Bangalore - Karnataka

Tender For bid to ras corrigendum : supply of 221201 bone wax box of 12 , 221247 extra ventricular drain , 221323c oxidised regenerated cellulose size 1 x 2 box of 10 , 221323d oxidised regenerated cellulose size 2 x 4 box of 10 , 221323e oxidised regenerated cellulose size 4 x 4 box of 10 , 221323g oxidised regenerated cellulose size 2 x 3 box of 10 , 221323l oxidised regenerated cellulose size 1 x 3. 5 box of 10 , 222317b fibrin glue 2ml containing fibrinogen plasma fibrinectin and calcium chloride solution , 222718 axial screw 5. 5 x 35 mm , 222719 axial screw 5. 5 x 40 mm , 222720 axial screw 5. 5 x 45 mm , 222721 axial screw 6. 5 x 35 mm , 222722 axial screw 6. 5 x 40 mm , 222723 axial screw 6. 5 x 45 mm , 222724 axial screw 7. 5 x 35 mm , 222725 axial screw 7. 5 x 40 mm , 222726 axial screw 7. 5 x 45 mm , 222727 prebent titanium rod 5. 5 x 30 mm , 222728 prebent titanium rod 5. 5 x 35 mm , 222729 prebent titanium rod 5. 5 x 40 mm , 222730 prebent titanium rod 5. 5 x 45 mm , 222731 prebent titanium rod 5. 5 x 50 mm , 222732 prebent titanium rod 5. 5 x 55 mm , 222733 prebent titanium rod 5. 5 x 70 mm , 222734 prebent titanium rod 5. 5 x 80 mm , 222735 prebent titanium rod 5. 5 x 90 mm , 222736 prebent titanium rod 5. 5 x 60 mm , 222739 hydrocephalus shunt system complete set regular size vp medium pressure , 222777 surgical patties assorted size , 222816 jelatin thrombin hemostatic matrix-gelatin matrix thrombin component flowable surgical hemostat 5ml ) /bid number: gem/2026/b/7083342 * /dated: 20-01-2026 & & / bid document1 / 29

CTN :45218555

25 May, 2026 NA

Jamalpur - Bihar

Tender For auction sale of depot ferrous scrap - pl no. 98050448, scrap m.s. consisting of box wagon body cutting, pipe, rod, nut-bolt, slack adjuster, hand wheel, control rod, bogie end pull rod, side bearer, channel, angle, wagon door and other box wagon body cutting parts available on the lot.[excluding steel wagon door & steel plate, knuckle, pivot, adopter if available on the lot.]

Central Government/Public Sector

CTN :45194622

05 Jun, 2026 NA

Perambur - Tamil Nadu

Tender For supply of srphc82364170-titanium polyaxial non fenestrated screws(thoracolumbar screws).used for thoracolumbar fixation and stabilisation in spine trauma, degenerative and tumor surgeries. pedicular screws should have a reverse threaded mechanism and should be compatible with 5.5mm titanium rod. screws should be available in sizes of 4.5, 5.5, 6.5 mm,27.5 mm diameter and 25-55mm in length. system should have break off plug mechanism.screw should have an angle of not more than 28 degree between the head and body. system should be compatible for minimally invasive surgical technique and also be used along with fenestrated or/and hydroxyapatite coated screws. system should be registered with drug controller general of india. system should be iso or bis or fda or ce approved.[quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45174600

20 May, 2026 NA

Multi City - Karnataka

Tender For auction sale of depot ferrous scrap - ap-apd-0112-ms-26-b298050126]scrap cond./released/unserviceable ms scrap such as chequered plates, angles, channels, side frame , cut pieces of water tank, long pull rod, wheel lathe parts, cribs, ms boxes, ms sheets, ms rods, cut pieces of bogie frame, lower spring sheet beam, trough floor sheets, center beams, screw couplings, center beams, cut pieces of pipes & pole, girder, cut off sheets, coach end body, pipe rack, iron rods, bolt & nut and other items coming under ms parts and stresses, etc on as is where is condition available under the custody of cdms 08 ward ap {cutting permitted upto loadable size } (loc:bin no 112 at scrap yard )

Central Government / Public Sector

CTN :45146145

19 May, 2026 NA

Multi City - Telangana

Tender For auction sale of depot ferrous scrap - 12161ms26b, 98050011, quantity- 159.920 mts. scrap condemned unserviceable ms- cs mixed scrap of carriage and wagon and loco items consisting of bolts, nuts, pins, washers, cotters, head blocks, distance blocks screw rods, handle supporting bare plates, ms back locks, mmts racer cover, locking screws, nuts, bmbc components, jigs fixtures and loose spares, safety nuts, jack wheel arms, schaku couplers, coupler spares, tension rods, sheet cut pieces, levers, links, iron skids, anti roll bar with fork link, pins electroplated, cut pieces of angles, pipes, channels, flats, plates, rod cut pieces, sabs, cbc housings, common pipe bracket, pivot caps, buffer plates, cbc coupler handles, coupler rods, barrel bush, silent blocks, shackles, wide jaw adaptor, clamps, compensating ring, wire rope, push pull rods, towing trolley, jack frame, anchor links, lashing chain assembly, destroyed hangers and blocks, cap for fuel inlet pipe assembly, cbc back stopper plates, brackets, gear wheels, sheets, pivots, washers, equalizing stays, dampers, shock absorbers, dmb rings, dashpots, trolley wheels, brake shoes, compressor parts, brake heads, keys, dip lorry wheels, stays rings, chain cut pieces, draw bar spindle rod, draw bar support beam, ferrous scrap of emus, body gear, under gear, spring gear, draw gear, cbc operating handle, cbc supporting device, cbc support plate, air spring suspension bellow, suspension rod, socket, ring retainer, long bolts, mmts rear cover, speedo meter cover, retainer cap, brake cylinder, brake calliper, center pivot, equalizing lever, axle box covers, berth and door frames, filters, lever hangers, ci cylinder bodies, diesel loco items, ci hose cocks, piston, piston trunk, ratchet with screw rods, flanges, destination boards, small dia. springs, hooks, articulated lock lift lever assembly, collars, links, pivots, cylinder body, bp and fp cocks, c.r.tank, locking screw, locking cups, dmb ring, sab end push rod, sand ejectors, adaptors, wearing plate, centre pivot cover, z levers, springs, caliper bolts, reducing bushes, control arms, seaters, center pivot tops, pull rods, punching dies, round rods, bogie under frame cut pieces, ms drilling jig, horizontal bolts, hex bolts with nuts, dividing plates, side bearer guide, lever box, center pivot bottoms, ct rb bearing components, fabricated structures of sorts and sizes, with or without attachments of rubber, fiber, nylon bushes and other similar carriage, wagon, mmts, emu, dmu and loco items including rusted and corroded sheets. location- bin no- 161, left side of road no- 1. hsn code- 72044900. gst- 18 percent. note- delivery on actual weighment basis only. special note: overload of the carrying capacity of the vehicle will not be permitted at the time of taking delivery, as per motor vehicle act 1988.

CTN :45153898

28 May, 2026 NA

Bokaro - Jharkhand

Tender For supply of goods, bogie end pull rod for casnub bogie drawing no.: rdsos drg. no. sk 69597, alt41, item no. 2.material and specification: is: 2062: 2011(rev. 7), amend. no. 1 of nov. 2012, gr. e 250 a [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45087066

13 May, 2026 NA

Rajkot - Gujarat

Tender For auction sale of depot ferrous scrap - old used and u/s signaling items i.e. complete signal units, electronic lifting barrier, signaling pole latice with ci attached, cable termination rack, location box full &half, armed wire, sliding boom complete, operating panel, padestal, ristrictor wearing plate, gi boom for elb, nbt block instrument, point machine chasis with accesaries with minor nf attached, lock lever, stop disc for lb, winch m/c, ground connection, rail attached ms board, ms board with angle, ms rusted bars, rods, fire bucket, electric lifting barrier and other signaling items with minor nf attached, c&w items i.e. various types and sizes broken springs, inner springs, released bogie beams offsized outer springs, broken cbc body, striker casting wear plate, man hole cover, pull rod, push rods, plates, knucle pin, brake beams, cp top, knuckle, draft gear box, adeptor, push rod, safety bracket, brake shoe, pin, nut bolts, top side liners, stricker, primary verticlal damper, yaw damper, vertical shock absorber, vertical sec damper, lateral damper, axel end cover, centric disc, fastners, fire extingyishers offsize & type, beater, pick axe, shovel heat, mechanical jack, hydraulic jack, pad lock, hammer, gi wire, basket, tin case, offsize rack ballast, bucket gi, pan iron, ohe items i.e. offsize and type insulators, ohe high mast cut pieces and other ohe items, ms bond patti, blow lamp, structural clamp, isolator assembly, various boards, retro reflactive number plates, junction box, small chain, anti climbing device, hot rolled steel flat, fuse switch assly, padestal, cantilever assly, da-2, caution board, guy rod with mast & guy attached bolt items of electric and power department i.e. pawrah, el box, switches, etc items of works department i.e. ms angle, plates, ms patra, ms i sections, gi gater, parline, tmt bars, gate post, gate flap and other ms items with some rail pieces attached, items of tele department i.e. cgdb pole, ms boxes, items of p way department i.e. rail dolly, push trolly, self propelled motor trolly, hand cart, gi case, broken tiebars, ms engineering boards, rail cum road trolly, ms clamp for joggle fishplate, rail tongue, st slipper, all types of lc boards, ms pipe, ms fishplate, hs lamp, rail toung, whistel thunder, hand operated cutting m/c, hydraulic jack, office clock, dubber for gate lamp, gi bend, broken bdds rsp tool kit, broken bomb blank vehicle search mirror, lock pad, skv welding set, rusty cst 9 port, ms sheets, chequered plate, cc cribs, may have some ss items (the above items may be with minor nf attached or may not be) (the above items may have rusty and dusty or may not be) ( cuting allow for easy loading before delivery) mode of delivery- by weight location - scrap yard & i/f of godown 6

Central Government/Public Sector

CTN :45049801

21 May, 2026 NA

Perambur - Tamil Nadu

Tender For supply of srphc82364155-rigid poly screw for posterior anterior spinal system. used for thoracolumbar fixation and stabilisation in spine trauma, degenerative and tumor surgeries in both anterior and posterior construct. pedicular screws should have a reverse threaded mechanism and should be compatible with 5.5mm titanium rod. screws should be available in sizes of 4.5, 5.5, 6.5 mm diameter and 25-55mm in length. system should have break off plug mechanism.screw should have an angle of not more than 28 degree between the head and body. system should be compatible for minimally invasive surgical technique and also be used along with fenestrated or/and hydroxyapatite coated screws. system should be registered with drug controller general of india. system should be iso or bis or fda or ce approved.[quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ]

Titanium Rod Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector