Latest token device Tenders | Government token device Tenders

Central Government/Public Sector

CTN :43213104

29 Jan, 2026 NA

Dahod - Gujarat

Tender For corrigendum : supply of micro processor based electronic speed cum energy monitoring system (esmon) for three phase electric locomotives .

Central Government And Public Sector

CTN :43270366

31 Dec, 2025 NA

Kaiga - Karnataka

Tender For providing of customized amc/cmc for pre-owned products - automated electronic tld management system; senergy intellution; annual maintenance contract (amc); annually; no

CTN :43264904

05 Jan, 2026 3.01 Crore

Srinagar - Jammu And Kashmir

Tender For supply of pesticide residue analysis laboratory equipments : : -electronic analytical balance , electronic open top loading balance , analytical balance micro , hot air oven for both 130 and 80 litres , table top cooling centrifuge mutlispeed centrifuge for quechers , refrigerated centrifuge , laboratory refrigerator temp range 2 to 8 degree c 3 16 degree c of 1000 l and 360 l capacity , micro pipettes one channel fixed micro pipettes , micro pipettes one channel variable electronic micro pipettes , adjustable volume digital multichannel micro pipettes , soxhlet extraction assembly fully automatic , solid phase extraction manifold , laboratory grinder , horizontal deep freezer of 300 500 litres , bath sonicator , vortex mixer shaker , digital ph meter , magnetic stirrer with hot plate , rotatory evaporator with recirculating chiller , microwave digestion system , shakers homogenizer incubator high volume , shakers homogenizer incubator low volume

CTN :43266812

16 Jan, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For providing of repair and overhauling service - scanners; repair stw calibration and tuning of electronic automatic boiler control system onboard in ship; yes; buyer premises

CTN :43290934

06 Jan, 2026 10.20 Lacs

Surat - Gujarat

Tender For supply of sensing and gis , soft computing with matlab programming , gate 2026 civil engineering book , engineering material , highway engineering , airport planning and design , transportation engg , environmental engineering sewage waste disposal and air pollution engineering vol2 , hydrology and water resoureses engg , traffic engineering and transport planning , construction engineering management of projects , transportation engineering , disaster management , modern project management , building materials , basic civil engg , environmental engg1 water supply engg , environmental engineering 2 waste water engg , ground improvement techniques , project planning control with pert cpm , practical construction contract issues which are not commonly understood , infrastructure and contract management 2nd edition 2024 , infrastructure engineering management , iot and smart cities , disaster management act 2005 , project management cpm, pert gertscheduling with linear programming , guide to rera with rera check lists by taxmann gujarat rera manual , law relating to tenders and government contracts , irrigation engineering , indian constitution , surveying vol i , surveying vol ii , surveying vol iii , building planning designing and scheduling , digital principles and applications , a first course in artificial intelligence , integrated electronics , cmos digital integrated circuits analysis and design design of analog cmos integrated circuits , introduction to robotics , engineering circuit analysis , introductory circuit analysis electronic devices and circuit theory 11e , computer networking and the internet computer networks and internets 6e , arm system on chip architecture 2nd edition , basic vlsi design , signals and systems , automation, production systems, and computer integrated manufacturing 5th edition , internet of things an indian adaptation concepts and applications , machine learning with python , communication systems , an introduction to analog and digital communications , linear circuits analysis , electronic devices and circuits , gate 2026 electronics engineering previous year solved papers , isro drdo bsnl previous years solved papers of electronics engineering , a handbook on electronics engineering , an introduction to internet of things connecting devices edge gateway and cloud with applications , industrial automation and robotics 2nd edition , introduction to the constitution of india , the constitution of india , thermodynamics basics and applied thermodynamics , principles of materials science and engineering , fundamentals of finite element analysis , shigleys mechanical engineering design , engineering thermodynamics , manufacturing technology vol1 5th edition , design of machine elements , machine design data book , oil hydraulic systems-principles and maintanance , fluid mechanics 9th edition , engineering fundamentals of the of internal combustion engine , materials science and metallurgy , manufacturing engineering and technology , fluid mechanics an introduction 3rd ed , fluid power with applications , callisters material science and engineering , project management , quality management , fluid mechanics and machinery , fluid mechanics , gate mechanical engineering , welding engineering and technology , industrial safety health and environment management systems by , automobile mechanics , fluid machinery , engineering mechanics , shortcuts in reasoning //bid details2 / 163verbal nonverbal analytical critical for competitive exams , general quantitative aptitude for competitive exams , oil hydraulics and pneumatics , project management cpm pert gert scheduling with linear programming , general knowledge , how to crack test of reasoning , a new approach to reasoning verbal non verbal , mechanical system design , hydraulic and fluid mechanics , fluid mechanics hydraulics and hydraulic machines , environmental engineering fundamentals sustainability design 3rd edition , the mbr book 2nd edition p

CTN :43185676

05 Jan, 2026 NA

Jind - Haryana

Tender For purchase of various apparatus/instruments required for department of chemistry, chaudhary ranbir singh university, jind - stirrer- the stirrer should be made up of ceramic coated aluminium alloy top with digital speed and temperature control. the stirring speed should be 50-1500 rpm or better. the stirrer should be operational up to a temperature range of 300oc with an accuracy of 1.0oc and ip 42 protection class. the input power should be 600 w or above. the stirrer should be supplied with hemispheric bowl (100 ml= 1 no; 250 ml= 1 no) to replace oil baths and mantles in order to perform clean and safe analysis with round bottom flasks.warranty must be one year., electronic balance- the electronic balance should have a maximum weighing capacity of 200 g or more with a resolution and repeatability of 0.1 mg, and a response time of 5 sec or better. the system should have automatic internal calibration with touch screen display. the system should have internal database capacity of 2500 or more with multiuser password protection feature. warranty must be one year., vaccum pump - the pump should be operational at a maximum power of 65 w or more with a max. vaccum of 99 mbar or more. the pump should be fitted withvacuum and filter cartridge., hot air oven- the inner chamber should be made of stainlesssteel and the outer chamber should be m.s powdercoated. the maximum capacity of the oven shouldbe 100 ml or more. the operational temperatureshould be between ambient to 250oc or more witha temperature accuracy of 1o c. pid based digitaltemperature control., double distillation unit- the unit should be pyrogen free with a distillation water output capacity of 1.5 l/h. the minimum cooling water requirement should be 1lt/min. auto-power cut facility in case of halted supply of water., circulating oil bath- the oil bath should be made up of stainless steel with 4 digit 7 segment led display for temperature and time. the bath should have s.s perforated tray for holding flasks. the bath should have a capacity to accommodate flask of 1l. the working temperature range should be +5 to 240oc (0.1oc increment) with a temperature stability of 1oc, water bath- the water bath should have a capacity of 20 l within built water level sensor. the bath should be made up of stainless steel and supplied with 8 concentric rings. the bath should have digital temperature control with pt100 sensor. the system should have stirring capability with ptfe magnetic bars., ph/ condutivity meter - operational between a ph range of -2 to 16.00 with a resolution of 0.01 ph and an accuracy of 0.02 ph. 5 points calibration. the ec range shouldbe in between 0.00 to 29.99 s/cm, uv cabinet- operational at two uv wavelengths (254 and 365 nm). the cabinet should also be equipped with one visible light. the external body should be coated with ms powder/epoxy., flame photometer- application: the flame photometer is used for qualitative and quantitative determination of several cations, especially for metals that are easily excited to higher energy levels at flametemperature. these metals include na+, k+, ca2+, ba2+ and li2+.specification requirementmeasuring range na+: 0 to 99.9 ppm k+:0 to 99.9 ppm ca 2+ :0-99.9 ppmli 2+: 0 to 99.99 ppmsensitivity na+= 0.1 ppmk+ = 0.1 ppmspecificity less than 0.5% interference when concentrations are equal to test sample concentrationsgas control-adjustable with knobsignition system-auto ignition systemflame failure-auto detectiongas cut off-automaticreproducibility-less than 1% coefficient of variation for 20 consecutive samplesusing 10 ppm na set as maximum standardlinearity-less than 1%display led, 12.5 mm (1/2")fuel supply-high-grade propane/butane mixture regulated at approximately30 psiair supply-6 l/min at 12 psi; oil and moisture freerecorder-output 0.05 to 5 v (switchable)operating manuals, service manuals, other manuals should provide user, technical and maintenance manuals in english language list of equipment and procedures required

CTN :42781224

23 Dec, 2025 NA

Jodhpur - Rajasthan

Tender For bid to ras supply of puf panel for wall and roof , overlap hinge door , floor puf slab with single layer tarfelt , installation of puf panel and door , supply of reciprocating condensing unit , supply of evaporator unit with expansion value , installation of refrigeration system with copper tubing with insulation , electronic control panel oblique refrigerated control panel

Central Government/Public Sector

CTN :43252600

09 Jan, 2026 NA

Hisar - Haryana

Tender For tender for supply of video conferencing facilities augmented virtual reality system : : - 4k ptz camera with 20x optical zoom , hybrid conference controller , multichannel all in one digital signal processor aio-dsp 100w , electronic digital podium , conference system- delegate unit wireless , conference system chairman unit wireless , access point ap transmitter , conference system battery charging unit 8 , laptop , projector full hd , 6u rack with three plates , on line ups 5 5kva 1ph 1ph with batteries

corporations/Associations/Others

CTN :43163368

23 Dec, 2025 NA

Sirmaur - Himachal Pradesh

Tender For corrigendum : online electronic bids through electronic tendering system (ets)/ custom bid are inviting e-tender in two bid system for supply of bearing housing with labyringth seal and cover or equivalent

CTN :43206378

26 Dec, 2025 1.89 Lacs

Chandigarh - Chandigarh

Tender For maintenance of e.i in rb at chandigarh.(providing lawn lights in house no. 68 (type-dmh) sector-7, chandigarh. (e.i. wrok). - dsr item no. 1.10 wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed medium class pvc conduit, with modular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm. frls pvc insulated copper conductor single core cable etc as required., group b, dsr item no.1.31 supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 a modular socket outlet and 5/6 a modular switch, connections etc. as required., dsr item no.1.32 supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 a & 15/16 a modular socket outlet and 15/16 a modular switch, connections etc. as required., dsr item no. 1.17 supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required., 3 x 1.5 sq. mm, 3 x 2.5 sq. mm, dsr item no.1.21 supplying and fixing of following sizes of medium class pvc conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required., 20 mm, 25 mm, dsr item no. 1.33 supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required., dsr item no.1.26 supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required., dsr item no.1.25 supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required., dsr item no. 2.16 supplying and fixing dp sheet steel enclosure on surface/ recess along with 25/32 a 240 v "c" curve dp mcb complete with connections, testing and commissioning etc. as required., dsr item no. 8.9.5led batten light (system lumen efficacy 105 120 lm/watt)supplying, installation, testing & commissioning of led surface mounted batten light of following body material and construction as per is : 10322 with driver (replaceable) as per the requirement with driver efficiency >85%, (as per complete item no. 10 of the dnit)., 18- 22 watt, supply and erection of b.l. holder of make anchor panta / havells reo/ gold medal essenza isi marked on existing jn. box / wooden block including making connection etc as required., s/e of led bulk head luminaries weather proof frosted light with pmma / pc reflector and silicon gasket to be installed on surface. the led fitting should have minimum system lumen output minimum 1000 lumen and the driver of the fitting should be workable on 140-260 volt. (as per complete item no. 12 of the dnit)., supply & laying of pvc copper wire 1.5mm sq. 3 core round sheathed wire on existing surface with suitable clamps/ hanger etc. including making connection and petty material etc. as required to complete the job to the entire satisfaction of engineer-in-charge. the copper wire should be of polycab/ l&t/ havells/ finolex/ r.r. kables make only., supply & erection of fresh air fan high speed motor with copper wound 10 sweep with louver and plastic body complete with high speed motor, blades, epoxy powder coated of havells make ventiliar dx white / orient make ventilator / crompton make brisk air/ bajaj make 70049 250mm sweep only. (as per complete item no. 14 of the dnit)., s/e of led 8w/ 9 w. bollard fitting. the bollard should be approximately (800 mm long and 200 mm wide) from the top of the fitting. the bollard should be made out of extruded aluminium profile and die cast aluminium base with pmma/ opal diffuser bollard painted with superior quality of paint. (as per complet

Token Device Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector

corporations/Associations/Others