Latest tool carrier Tenders | Government tool carrier Tenders

State Government

CTN :45293777

29 May, 2026 3.54 Lacs

Multi City - Telangana

Tender For procurement of tools and equipment for lascars/helpers towards operation and maintenance activities for irrigation sub division no.1, nizamsagar - supply and transportation of 1 hp single phase self priming mono block ip44 motor pumpset. makes: texmo / cri / ksb / aryenvarsha / lubi / falcon , supply and transportation of 5 hp three phase mono block ip44 motor pumpset. makes: flowell / waterman/ ellen / narayani / sai varsha / sterling / duke / samudra / ajantha , supply of 13 mm fibra fiberglass measuring tape - 30m/100ft with unbreakable abs case, durable curved mechanism handle & steel end hooks, make: freeman as directed by engineer-in charge , supply of 2.00 hp four stroke straight shaft brush grass cutters with 2-teeth blade (14 inches) for cutting, which is 360° inclinable. ideal for tough, sloping, and rugged terrains. make:-honda, agriplus, neptune, green leaf as , supply of 4 sq.mm 3 core pvc / xlpe insulated sheathed multi core bright annealed bare copper conductor heavy duty industrial cables for voltage grade upto 1100 volts as per is: 694:2010 including all transportation charges etc complete. , supply of axe with wooden handle as directed by engineer-in charge , supply of chain saw 22"(petrol) for tree cutting with 58cc powered as directed by engineer-in charge , supply of chains for chain saw machine as directed by engineer in charge , supply of electric shock proof hand gloves as directed by engineer-in-charge , supply of gumboots with steel toe isi mark for men as directed by engineer-in-charge , supply of hammer as directed by engineer-in-charge , supply of hand saw with wooden handle(iron prunning curved saw) for grass, wood, tress cutting as directed by engineer-in charge , supply of heavy duty steel tiller pitchfork with handle as directed by engineer-in-charge , supply of hoe tool (favda) for digging heavy duty as directed by engineer-in-charge , supply of iron digging bar/crow bars as directed by engineer-in charge , supply of nylon rope of 20mm diameter 60 mts in length as directed by engineer-in-charge , supply of plastic multipurpose gamelas (43.8 cm x 39.2 cm x 13.2 cm) as directed by engineer-in charge , supply of rechargeable aluminium body led torch with 120-volt ac/dc charger long range as directed by engineer-in charge , supply of saddle / clamps suitable for fixing 4 to 10 sqmm 2 core cable. , supply of safety helmet hard hat steeplejack climbing work construction worker adjustable headband 2 side venting design cushioning as directed by engineer-in-charge , supply of sickle with wooden handle for weed cutting as directed by engineer-in charge , supply of sluice operating handles as directed by engineer-in-charge , supply of taparia combination spanner set css25 (25 pieces) as directed by engineer-in charge , supply of tool box & screw driver kit as directed by engineer-in-charge , supply of waterproof standard length, high quality polyester fabric double coating reversible rain coat with hood & inner mobile pocket. set of top and bottom as directed by engineer-in charge

Central Government And Public Sector

CTN :45077845

03 Jun, 2026 NA

Guwahati - Assam

Tender For design, manufacturing, supply, installation, testing and commissioning of electric overhead traveling crane, capacity: 25/10t and dsl including spares as per schedule-iv and additional spares and items viz slings/lifting tackles as specified in schedule-i, maintenance tools as per schedule-v and any other accessory treated as concomitant accessory (as per attached leading parameters and detailed technical specifications specified in schedule-i and section-v conforming to specification no. cofmow/ir/eotc-2022, rev-0 or latest). [ warranty period: 24 months after the date of delivery ]

Central Government And Public Sector

CTN :45090913

04 Jun, 2026 NA

Guwahati - Assam

Tender For design, manufacturing, supply, installation, testing and commissioning of electric overhead traveling crane, capacity: 35/10t and dsl along with spares as per schedule-iv and additional spares and items viz slings/lifting tackles as specified in schedule-i, maintenance tools as per schedule-v, any other accessory treated as concomitant accessory and preventive maintenance during 1st and 2nd year of warranty period. [ warranty period: 24 months after the date of delivery ]

Central Government And Public Sector

CTN :45248197

28 May, 2026 NA

Multi City - Chhattisgarh

Tender For auction sale of others - total qty.= 1138 nos., description: - hacksaw frame-1 no., lock(navtal)-1 no., sterup pump-1 no., tools carrier iron-1 no., hand platform trolley roller bearing with angle iron, size-10'x 2'x 1 1/2'-1 no., electronic quartz wall clock - 12''-1 no., ig padlock,50mm-11 nos., ig padlock,40mm-8 nos., tool kit with six items-7 nos., torch light 03 cell capacity(brass & aluminium body)-18 nos., steel piller-2 nos., light weight portable control telephone-116 nos., gas challah-6 nos., driver consisting tools, salson make(tool kit with 9 items)-5 nos., flying insect killer- 1 no., lwp telephone(light weight portable telephone)-65 nos., single position battery charger for gp-328 w/t(tin box type)-56 nos., ig bucket 18 ltr. capacity-5 nos., wedging clamp-50 nos., wall clock-1 no., minor lamp led type with charger(charger-01 no. and minor lamp-03 nos.)-1 set, cloth drying stand steel (folding)size- 2.5 feet-2 nos., table tp food warmer s/s 5 container-1 no., foot massager with supporting stand-1 no., automatic shoe shine machine-2 nos., electric chimney full size model-titan, suction power-1600-2 nos., drinking water cooler,storage capacity-80 ltr. make-usha-1 no., light weight portable control(p.t.phone)-41 nos., drinking water cooler, storage capicity-120 ltr. make-usha-1 no., ig padlock 75 mm galvd-3 nos., ig padlock 65mm(4 lever)-3 nos., tool kit bag with 4 items-1 no., empty gallon (tin) 05 ltr. capacity-3 nos., air pressure gauge-1 no., battery eliminator-1 no., bucket(g.i) 8"-1 no., bucket (g.i (04 gallen capacity)-5 nos., calling bell-1 no., clock office 12"-3 nos., pesto kill fly catcher machine with two florescent tube light-5 nos., room heater-1 no., trolley wheel(iron)-20 nos., clb line box-11 nos., plate half (s/s)-39 nos., plate quarter (s/s)-37 nos., tea stainer-2 nos., thali (s/s)-77 nos., tea spoon (s/s)-48 nos., table spoon (s/s)-8 nos., kettle (s/s)-2 nos., basin wash hand (18 dia) (s/s)-3 nos., desert spoon (s/s)-3 nos., tawa iron-4 nos., fry pan(s/steel)-2 nos., pressure cooker 2 ltr. capacity-1 no., fry pan (aluminium hindolium)-3 nos., jug water (s/steel)-18 nos., katori (s/s) big size (bowel)-33 nos., tea cup (s/s)-30 nos., tumbler (s/s)-96 nos., pan pressure-5 nos., bhati(vegetable cutter)-2 nos., degchi (s/s) 6"-19 nos., karai (handolium) 10"-2 nos., rice pressure cooker-5 nos., steel knife-2 nos., spoon serving (s/s)-24 nos., hawkins pressure cooker (03 ltr. cap.)-6 nos., gunj (s/s) 6"-7 nos., gunj (s/s) 8"-11 nos., gunj (s/s) 10"-5 nos., gunj(s/s) 12"-2 nos., pressure cooker 6.5 ltr.-1 no., frypan steel (copper base)-2 nos., sansi (s/s)-2 nos., kadai (hindolium) 12"-4 nos., panja (rice spoon) s/s-6 nos., dal spoon s/s-6 nos., palta s/s-6 nos., kadahi (s/s) bottom copper base 12"-2 nos., kadahi (s/s) bottom copper base 8"-2 nos., gunj s/s with lid 12"-4 nos., gunj s/s with lid 10"-4 nos., gunj s/s with lid 8"-6 nos., gunj s/s with lid 6"-12 nos., degchi 6 1/2"(s/s)-15 nos., degchi 8"(s/s)-19 nos., degchi 10" (s/s)-10 nos., degchi 6" (s/s)-36 nos., degchi 8" (s/s)-24 nos., degchi 10" (s/s)-14 nos. remarks - material to be sold on as is where is basis and will be delivered in numbers except minor lamp led type with charger(charger-01 no. and minor lamp-03 nos.) in set.

CTN :45281940

30 May, 2026 NA

Leh - Jammu And Kashmir

Tender For supply of cook house dinning hall partly fems dh, supply of constr material, supply of structural material, supply of elect items, supply of misc items - cement , steel (structural , steel & tmt) , pre colour coated , plain galvanized , iron sheet (ppgi) , with zinc coating , 120gm , pre-profiled , polycarbonate , sheet , cgi/pgi sheet 24 , guage , puf /pir panels , glazed ceramic , tiles/non- skid , ceramic tiles/ , vitrified tiles , aluminum sections , for , door/window/fram , es/ , partitions , aluminum extruded , alloy fittings for , aluminum doors/ , windows/ puf , panel doors , m/s builders , hardware , mortice lock , diesel generator , set , (air cooled above , 3.5kva upto 15 , kva) , diesel generator , set , (liquid cooled , above , 15 kva) , generator set , (portable) (below , 3.5 kva) , submersible , pumps/ motor with , starters , motor starters , multi strand copper , wires , lt electrical cable , 1100 volts, xlpe , electrical fittings , mcb/mccb/db/isol , ators/ change over , switch , cfl fittings/ lamp , led fittings/ lamp & , led tube light and , accessories , halogen lamp , led solar lights , led solar lantern , led street light & , accessories , wall mounted heat , blower , electrical exhaust , fan/ extractor , fan/ventilator fan , fire extinguisher , smoke alarm , water heating , device (electric) , (geyser) , steel tubular poles , (swaged) , pvc casing capping , pvc conduit pipe , circular , insulation tape , (electric) , solar panel , solar hybrid wind , turbine , solar hybrid , pcu/invertor , battery lithium- , ion/lithium , phosphate , battery lead acid , voltage stabilizer , cp sanitary fittings/ , bathroom cabinets , vitreous china , sanitary , appliances/fittings , (english wc/ wash , basin etc) , ppr pipes & , accessories , water closet seat , cover , pvc flushing , cistern , hdpe water , storage tank , puf tank , frp septic tank , stainless steel sink , looking mirror , glasses (plain , head / frosted) , toughened glass , pvc pipes including , fittings , standard wide , gauge pipes , stainless steel , western commode , stainless steel , wash basin , mattress , pvc furniture (chair) , office furniture , steel almirah , ply wood/ pre laminated , particle board/ fibre , board (medium density)/ , teak face ply , laminated sheets , adhesive , power tools , hand tools , synthetic enamel , paint/printer , oil bound distemper / , cement based paint , unplasicized polyvinyl , chloride - upvc , windows, doors) , wooden door , ply board /ply wood , false ceiling , quick setting compound , magnetic hinges , turbo vent , bain marie , hamam 1kl with motor , gate valves , chemical earthing , flame proof light fitting , hydraulic door closure , spring , ci manhole cover , frame , steel wire rope , insulation (puf) for pipes , electrical chimmney , sheet metal enclosure , and lt panel , kero heater , bukhari (field heating , device) , loft tank

Central Government / Public Sector

CTN :45282850

15 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of set of removal and insertion tool for day to day three phase electric loco maintenance. each set consisting of (1) removal tool to dmc part/code no. drk16a (ms24256r16) or equivalent astro tools corporation part code at 2016 or equivalent-05nos. (2) insertion tool to dmc part/code no. dak16 (ms24256a16) or equivalent astro tools corporation part code at a 1101 or equivalent-05nos. [ warranty period:12 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45137990

27 May, 2026 NA

Raigad - Maharashtra

Tender For corrigendum : repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; tender for the job of obtaining consent to establish for hter scheme at rcf thal unit through nipl route; as per scope of work; a) safety violation by contractor employee at work place: 1) working without wearing safety helmet (per person), 2) working without wearing safety shoes (per person), 3) working without wearing safety goggle &/or hand gloves during handling of hazardous chemicals, acid/alkali etc. (per person), 4) working without wearing safety belt (double lanyard full body harness) for height jobs above 2 meters. (per person), 5) working without wearing face shield during cutting, welding, grinding activity and during maintenance work on process lines and equipment. (per person), 6) not using ppe, tools/tackles as mentioned in safety work permit (per person), 7) working without valid test certificate for lifting tools/tackles (per incidence observation), 8) working without appropriate electric plug-pin, elcb/rccb/rcbo (per incidence observation), 9) working without a valid safety work permit (per incidence/ observation), 10) permit not available at site (per incidence/observation), 11) gas cylinder without flash back arrestor (per incidence observation), 12) gas cutting set with damaged hose pressure gauge without valve key (per incidence/observation), 13) gas cylinder without trolley (filled and empty) (per incidence/ observation), 14) unauthorized personal entering into cordon off area (per incidence/observation), 15) faulty wire/cable laying on ground or using snapped cables (per incidence/observation)., 16) improper hand tool or power tools (per incidence observation), 17) smoking at work place area. (per person), 18) found in intoxicated state (per person), 19) violation of road rules (per incidence observation), 20) b) safety violations by transport contractors, 21) faulty hazchem displayed on tanker (per incidence observation), 22) one pvc/tychem suit set if available (per incidence/ observation), 23) both pvc/tychem suit set are not available (per incidence observation), 24) fire extinguisher without hydro test. (per incidence/ observation), 25) trem card not available (per incidence/observation), 26) hazardous chemicals transportation training of driver by authorized agencies. (training card not available with driver) (per person), 27) lying/resting below the vehicle(per incidence/observation), 28) any other deviation found as per checklist for tankers (per incidence/ observation.

corporations/Associations/Others

CTN :45276552

01 Jun, 2026 63.50 Lacs

Jaipur - Rajasthan

Tender For supply, installation, testing and commissioning of elv equipment in seminar hall and class room at government ayurved, yoga natural chikitsa integrated college, kekri district ajmer - based on electric bsr 2022, s&f following sizes (dia.) of isi marked virgin material mms ( is:9537 p - iii ) pvc conduit along with isi marked (is:3419-1988) accessories as required in recess including cutting the wall, covering conduit and making good the same as required. for additional technical parameters of product / work refer annexure a attached with this bsr, 25 mm, 32 mm, providing & fixing of iso certified company made virgin material pvc trunking system as per pwd specification for electrical works, with double lock feature for cable management including finishing accessories like corners, tees, adjustable angles, junction etc. as required . the trunking system shall have adaptable system for modular type rj 45 data socket/ wiring accessories/ power sockets and shall be covered with peal off plastic cover. oem shall have submit nabl accrediated /cpet lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., 32mm x 20mm, 100/105mm x 50mm, supply, drawing and testing of 4 pair, 23 awg solid bare copper wire insulated with pvc, utp (unshielded twisted pair), category 6, class e, 100 ohm impedance, indoor cable as per latest ammendments of ansi/tia/eia-568 , the copper conductors should be balanced twisted in pairs, seperated by a cross-member fluted pair divider & protected by pvc jacket. certified performance in a 4-connector configuration upto 100 mtrs channel requirements & transmission frequencies up to 250 mhz. in existing ms/pvc conduits/casing capping including making connections to information outlets and patch panels with jack & ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., supply and installation of unsheilded/360 degree sheilded information outlets made of high impact plastic body with abs, fr grade halogen free material with provision for protection against dust in jack, suitable for cat 6/6a application complying to latest ammendments, according. to cat. 6/6a channel, it should support channel as well as components requirements of cat.6/6a standards at frequencies of up to 250 to 500 mhz. cat 6/6a unshielded/shielded jack should be suitable to terminate 4 pair, 23/24 awg solid/stranded wire diameters, using 100 ohm unshielded/shielded balance twisted pair cable, the jack should have tooless/impact termination on reliable copper tin plated insulation displacement contact, with easy lock mechanism, it supports iec 60603-7-4 and complied with ansi/tia/eia 568 c.2 standard. jack should be rj11,rj12 & rj45 compatible. should support ethernet 1.2 gb/s atm,digital video and broadband/baseband analog video, voice over internet protocal (voip) specifications in existing modular/ms boxes along with necessory connections as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., cat 6, un-sheilded information outlet, supply & fixing of square faceplate for flush / surface mount information outlets single/dual or quad aperture , material should be pc+abs body, suitable for rj45 unshielded/shielded connection modules. should match with i. o. oem. dimensions should be 86mm x 86mm as required complete in all respect. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., single aperture, providing & fixing of wiring accessories oem fabricated f

corporations/Associations/Others

CTN :45278994

01 Jun, 2026 63.50 Lacs

Jaipur - Rajasthan

Tender For sitc of elv equipment in seminar hall and class room at government ayurved, yoga natural chikitsa integrated college, kekri district ajmer -sitc of elv equipment - based on electric bsr 2022, s&f following sizes (dia.) of isi marked virgin material mms ( is:9537 p - iii ) pvc conduit along with isi marked (is:3419-1988) accessories as required in recess including cutting the wall, covering conduit and making good the same as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr, 25 mm, 32 mm, providing & fixing of iso certified company made virgin material pvc trunking system as per pwd specification for electrical works, with double lock feature for cable management including finishing accessories like corners, tees, adjustable angles, junction etc. as required . the trunking system shall have adaptable system for modular type rj 45 data socket/ wiring accessories/ power sockets and shall be covered with peal off plastic cover. oem shall have submit nabl accrediated /cpet lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., 32mm x 20mm, 100/105mm x 50mm, supply, drawing and testing of 4 pair, 23 awg solid bare copper wire insulated with pvc, utp (unshielded twisted pair), category 6, class e, 100 ohm impedance, indoor cable as per latest ammendments of ansi/tia/eia-568 , the copper conductors should be balanced twisted in pairs, seperated by a cross-member fluted pair divider & protected by pvc jacket. certified performance in a 4-connector configuration upto 100 mtrs channel requirements & transmission frequencies up to 250 mhz. in existing ms/pvc conduits/casing capping including making connections to information outlets and patch panels with jack & ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . , supply and installation of unsheilded/360 degree sheilded information outlets made of high impact plastic body with abs, fr grade halogen free material with provision for protection against dust in jack, suitable for cat 6/6a application complying to latest ammendments, according. to cat. 6/6a channel, it should support channel as well as components requirements of cat.6/6a standards at frequencies of up to 250 to 500 mhz. cat 6/6a unshielded/shielded jack should be suitable to terminate 4 pair, 23/24 awg solid/stranded wire diameters, using 100 ohm unshielded/shielded balance twisted pair cable, the jack should have tooless/impact termination on reliable copper tin plated insulation displacement contact, with easy lock mechanism, it supports iec 60603-7-4 and complied with ansi/tia/eia 568 c.2 standard. jack should be rj11,rj12 & rj45 compatible. should support ethernet 1.2 gb/s atm,digital video and broadband/baseband analog video, voice over internet protocal (voip) specifications in existing modular/ms boxes along with necessory connections as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . , cat 6, un-sheilded information outlet, supply & fixing of square faceplate for flush / surface mount information outlets single/dual or quad aperture , material should be pc+abs body, suitable for rj45 unshielded/shielded connection modules. should match with i. o. oem. dimensions should be 86mm x 86mm as required complete in all respect. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . , single aperture, providing & fixing of wiring accessories oem fabricated following size g

CTN :45270914

04 Jun, 2026 NA

Delhi - Delhi

Tender For supply of laser cutting machine (q3) , stock pot stove (q3) , stainless steel worktable with undershelf (q3) , single burner gas deep fryer (q3) , stainless steel bain marie (q3) , (vitreous china) - laboratory sinks-is:2556 (q3) , hot display counter (q3) , dough cutting machines (q3) , drinking water coolers (v4) isi marked to is 1475 (q2) , gi grating ( in number) (q3) , stainless steel shelf rack (q3) , roti making machine (q3) , industrial kitchen chimney (q3) , fire beaters (fire suppression hand tools) (q3) , water boiler (q3) , kitchen storage racks (various type) (q3) , commercial dosa hot plate (q3) , kadhai (q3) , domestic masala trolly (q3) , vegetable cutter (q3) , domestic vegetable grater (q4) , work benches (q3) , platform trolley (v3) (q3) , soiled linen trolley (q3) , chafers (q3) , waste container (v3) (q4) , electric grill (q3) , household refrigerating appliances as per is 17550 (q2) , onion / potato bin (q3) , health faucet (q3) , wall bars (q4) , non carbonated beverage dispenser (v2) (q3) , hair dryer / electric dryer (q4) , steel plate/thali (q4) , spoon (v2) conforming to is 16286 (q4) , domestic cutlery set (v2) (q3) , domestic drinking glasses (defence) (q3) , napkin dispenser (q3) , stainless steel jugs (defence) (q3) , dining plates (v3) (q4) , mugs stainless steel single double walled with double wall moulded handle (q4) , tea set (v2) (q4) , dining bowl (v3) (q4) , domestic vacuum flasks (v2) conforming to is 7708 (q3) , serving tray or platter (v2) (q4) , table (handicraft) (v2) (q3) , chair or bench or stool (handicraft) (v2) (q3) , heated display case - hot case (v2) (q3) , industrial oven (q3) , coffee dispensing machine (v2) (q3) , professional large format display (v2) (q2)

Tool Carrier Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors