Latest tooling spares Tenders | Government tooling spares Tenders

Central Government/Public Sector

CTN :45137990

27 May, 2026 NA

Raigad - Maharashtra

Tender For corrigendum : repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; tender for the job of obtaining consent to establish for hter scheme at rcf thal unit through nipl route; as per scope of work; a) safety violation by contractor employee at work place: 1) working without wearing safety helmet (per person), 2) working without wearing safety shoes (per person), 3) working without wearing safety goggle &/or hand gloves during handling of hazardous chemicals, acid/alkali etc. (per person), 4) working without wearing safety belt (double lanyard full body harness) for height jobs above 2 meters. (per person), 5) working without wearing face shield during cutting, welding, grinding activity and during maintenance work on process lines and equipment. (per person), 6) not using ppe, tools/tackles as mentioned in safety work permit (per person), 7) working without valid test certificate for lifting tools/tackles (per incidence observation), 8) working without appropriate electric plug-pin, elcb/rccb/rcbo (per incidence observation), 9) working without a valid safety work permit (per incidence/ observation), 10) permit not available at site (per incidence/observation), 11) gas cylinder without flash back arrestor (per incidence observation), 12) gas cutting set with damaged hose pressure gauge without valve key (per incidence/observation), 13) gas cylinder without trolley (filled and empty) (per incidence/ observation), 14) unauthorized personal entering into cordon off area (per incidence/observation), 15) faulty wire/cable laying on ground or using snapped cables (per incidence/observation)., 16) improper hand tool or power tools (per incidence observation), 17) smoking at work place area. (per person), 18) found in intoxicated state (per person), 19) violation of road rules (per incidence observation), 20) b) safety violations by transport contractors, 21) faulty hazchem displayed on tanker (per incidence observation), 22) one pvc/tychem suit set if available (per incidence/ observation), 23) both pvc/tychem suit set are not available (per incidence observation), 24) fire extinguisher without hydro test. (per incidence/ observation), 25) trem card not available (per incidence/observation), 26) hazardous chemicals transportation training of driver by authorized agencies. (training card not available with driver) (per person), 27) lying/resting below the vehicle(per incidence/observation), 28) any other deviation found as per checklist for tankers (per incidence/ observation.

Central Government/Public Sector

CTN :44362480

23 May, 2026 NA

Goa - Goa

Tender For bid to ras bid to ras bid to ras supply of m16x60mm long hex. bolt nut washer as per drg no 2097075310 , m16x70mm long hex. bolt nut washer as per drg no 2097075310 , m16x65mm long hex. bolt nut washer as per drg no 2097075310 , m12x55 mm long hex. bolt nut washer as per drg no 2097075310 , m16x90mm long hex. bolt nut washer as per drg no 2097075310 , m20x80mm long hex. bolt nut washer as per drg no 2097075310 , m20x85mm long hex. bolt nut washer as per drg no 2097075310 , m20x90mm long hex. bolt nut washer as per drg no 2097075310 , m20x100mm long hex. bolt nut washer as per drg. no 2097075310 , m24x95mm long hex. bolt nut washer as per drg. no 2097075310 , split pins 2. 5x25 , split pins 3. 2x25 , split pins 5x40 , split pins 6. 3x60 , jubilee clip 1by2 , jubilee clip 1 , jubilee clip 2 , jubilee clip 4 , jubilee clip 5 , o ring of various diameters in storage boxes as per encl , o ring making kit of reputed make as per encl , hand lapping tool set with metal grinding comp as per encl , frame hacksaw , blade hacksaw set , grinding wheel of size 10 x1 x1 typ coarse , grinding wheel of size 10 x1 x1 typ fine , set of drill bits with storage case as per encl , copper gasket 36 od , paper gasket oil proof jointing of diff thk 0. 15 1. 5thk , joint oil 1by8 , joint oil 1by64 , neoprene rubber sheet 0. 4 mm , neoprene rubber sheet 4. 0 mm , neoprene rubber sheet 5. 0 mm , neoprene rubber sheet 12. 5 mm , compound anti seize based on molybdenum disul as per encl , adhesive epoxy resin araldite 180 gms tubes , corrosion preventive compound. rocket wd 40bya , funnel 5 , funnel oil filling metal , hose rubber id 24 mm length 40 mtr , hose rubber id 33 mm length 40 mtr , hose rubber id 50 mm length 40 mtr , flexible plastic hose size 1 dia x 30 ft , can oil lubricating small , packing hemp , packing steam 1by2 , packing graphite , packing mica , gland packing 6mm , gland packing 8mm , gland packing 12mm , gland packing 14mm , industrial bucket 25 ltrs , soap used for general purpose cleaning , brush wire , brush weeping clean as per encl , detergent teepol , emery paper , paper abrasive , cleaning calico cloth , wire jute , cotton rags for cleaning , cocks gm 1by2 straight with sore ever shank and steel wrench , cocks t way sleeve packed as per encl , thermometer range 5 deg c 95 deg c , stainless steel putty of reputed make devcon , titanium putty of reputed make devcon , bronze putty of reputed make devcon , high temp synthetic adhesive compound as per encl , charging adaptors for nitrogen and refrigerant as per encl , teflon rods of diameter 20 mm , teflon rods of diameter 50 mm , teflon rods of diameter 87 mm , teflon tape , whiteboard for training 4 feet x 3 feet , fireproof dustbins for machinery compartments , recordable compact discs , recordable digital versatile discs , battery dry 1. 5v , alkaline battery aa 1. 5v , alkaline batteries aaa 1. 5v , rechargeable batteries aa 1. 5 v , multipurpose rechargeable batteries charger aa aaa 1. 5v , rechargeable batteries aaa 1. 5v , s. s locking wire 1. 5 mm , gauge pipe of copper od 10 x1. 0 o condition seamless //bid details2 / 62o condition seamless

CTN :45261119

30 May, 2026 NA

Parganas - West Bengal

Tender For supply of metallizing wire a gd margace cu coating dia 3.15 mm , boaring tool 20x20 k20 , tap 12x 1.75mm , dia 18x1.5 mm , tap 8x1.25 mm , tap one eighth npt 27 tpi , dia nut one eighth npt 27 tpi , dia seven sixteenth uns 24 tpi , tap one fourth npt 18 tpi , 4 inch cutter disc , 4 inch grinding wheel rough , 4 inch grinding wheel smooth , hss endmill cutter dia 10mm , hss endmill cutter dia 16mm

CTN :45255733

03 Jun, 2026 NA

Parganas - West Bengal

Tender For supply of solid carbide drill to size-10.10mm dia , iscar shred mill cutter dia.100 , circular insert of diameter 16 mm , 7mm solid carbide drill , boring tool holders s20r-sclcl-09 or equivalent , milling insert for cutter dia 12 mm with cr 2 , sq. soulder indexable milling cutter , milling insert for cutter dia 12 mm with cr 0.8 , segmented wheel grinding , boring tool holder s25r pclnr12-32 , holder svjcl 2525 m 16 , holder sir 0020 p 16 , dia 16mm inserted endmill cutter , insert - bdmt 11 t308 er-jt pr 1225 ) /bid number : gem/2026/b/7560851 * /dated: 19-05-2026 & & / bid document 1 / 23

State Government

CTN :45217414

01 Jun, 2026 NA

Faridkot - Punjab

Tender For quotation for purchase of workshop items - vaibhav pillar drill 230v (heavy duty), daptil roughing tool (heavy duty), grinding wheel 8" (heavy duty), metric tap set (6 no. to 32) (heavy duty), wing nut set (6 no. to 32) (heavy duty), adjustable steel tap wrench (13 mm) (heavy duty), face plate (flange) 8" (heavy duty), adjustable bench vice 250 mm (heavy duty), belt & pulley set (6-inch multi-groove) (heavy duty)

Central Government/Public Sector

CTN :45225007

26 May, 2026 NA

Durg - Chhattisgarh

Tender For supply of grinding segment 150 x 80 x 25 mm , grinding segment 150 x 35 x 90 mm , grinding wheel 200 x 13 x 31point75 mm , grinding wheel size 300 x 50point8 x 50 mm green , grinding disc for ag 7 size 180 x 22point23 x6point7 mm , diamond dresser tool drawing number misc 276 , cumi aa60 white wheel size 250 x 25 x 76point2 mm

State Government

CTN :45007460

21 May, 2026 10.00 Lacs

Datia - Madhya Pradesh

Tender For invitation for annual tenders for building construction materials — year 2026-27 steel rebar 12 mm (isi), steel rebar 08 mm (isi), steel rebar 06 mm (isi), steel rebar 10 mm (isi), centering wire, centering nails, grinding disc 04-inch, cutting disc 04-inch, square iron pipe 2"x4", round iron pipe 2-inch, master screw 3-inch, master screw 4-inch, plain sheet 4'x10' (corrugated), profile sheet 3.5'x14', cement bag 50 kg (acc/ambuja/ultratech), medium sand, coarse aggregate (gitti) 12 mm, fine aggregate (gitti) 6 mm, chimney bricks, branded welding rods, white cement 05 kg bag (birla white), m-seal 100 grams, iron angle, seat nut (for 2-inch angle), nut & bolt 1.5-inch, paver blocks, wall putty 40 kg bag (birla/asian/jk), p.o.p. (plaster of paris), mason's daily wage (as required), plastic mortar pan (tassla), shovel with handle, pickaxe with handle, pvc pipe 0.5-inch (isi), pvc pipe 0.75-inch (isi), pvc pipe 1-inch (isi), pvc pipe 1.5-inch (isi), pvc pipe 2-inch (isi), pvc pipe elbow 0.5-inch (isi), pvc pipe elbow 0.75-inch (isi), pvc pipe elbow. 1-inch pvc pipe elbow | 1.5-inch pvc pipe elbow | 2-inch pvc pipe socket | 0.5-inch pvc pipe socket | 3/4-inch pvc pipe socket | 1-inch pvc pipe socket | 1.5-inch pvc pipe socket 2-inch drainage pipeline; 4-inch drainage pipeline; 6-inch drainage pipeline; 2-inch drainage elbow; 4-inch drainage elbow; 6-inch drainage elbow; 2-inch drainage socket; 4-inch drainage socket; 6-inch drainage socket; tiles (1 x 1.5 ft, average quality); tiles (2 x 2 ft, average quality); urinal pot (average quality, including complete fittings); 4-inch waste grate; silicone sealant (200g pack); aluminum sliding window (standard, complete: 4 x 3 ft, including latches and glass); aluminum gate (complete: 3.5 x 6 ft, including plywood panel and glass); steel curtain rods (with 2 supports and 2 holders per 10-foot rod); branded metal primer; branded wood primer; iron gate (complete: weighing 18–20 kg per gate—priced per kilogram); steel mosquito mesh; cement sheet (3.5 x 10 ft); 4-inch tile cutter blade; pliers; tool box (all-in-one); hammer (500g); hammer (1 kg); chisel (6-inch); wedge (6-inch); round chisel/punch (6-inch); carpenter's square (1 x 2 ft); trowel/floater; plastering trowel (model 555); plumb bob (200g); straight edge/leveling batten (6 ft); straight edge/leveling batten (3 ft); wooden batten (2.5 x 4 inches); wooden batten (6 x 4 inches); water level tube (50 ft); waterproof plywood (6 x 4 ft). 6-foot folding rule, 4-inch folding rule, 5-meter measuring tape, 10-meter measuring tape, waterproofing chemical, complete plywood door (3.5 x 6 ft), complete fiber door (3.5 x 6 ft), iron window with grille (4 x 3 ft), 10-inch trowel, 6-inch handle, 4-inch hinge, 6-inch hinge, 6-way switchboard, 4x4 switchboard, 8-way switchboard box, light holder, 5-pin socket (6 amp), 5-pin socket (16 amp), switch (6 amp), switch (16 amp), fan regulator, mcb (6 amp), mcb (16 amp), mcb box (8-way), wall plug (gulli), screw (3.5 x 8), power cord, ceiling rose.

Central Government/Public Sector

CTN :45197749

04 Jun, 2026 NA

Koraput - Odisha

Tender For tender for supply of tools from hal provided technology - secondary master reference - pt 2 d , secondary master impeller stage-1 , laby.root measure tool , inspection tool , inspection tool , inspection tool , high frequency pin + equipment , handling box , tightening pedastal , pin , dn12 pipe , multi purpose flange blank , exp extractor , support connectors , blanking plate , immobilizer , blanking cover , flat seal , test fixture , assembly tool , raising device , support of assembly , support , tool circlip fitting , errection support , removal tool , handling tool , immobilizer pin , adaptation link , assembly fitting , balancing tool , milling fixture , rectification tool , flow check tool , fr plr assy tool , base casting , sleeve fitting tool , marking block , inspection fixture , errection tool , seal assembly cone , rotating plate , hydraulic pressure generating tool , variseal setting , measuring tool , measuring tool , measuring tool , assembly spacer , extractor , seal setting tool , test adaptation , test tool (for tm0073g001) , support tool (for tm0073g001) , special tightening tip , checking tool , control tool , control tool , ring removal/installation , assembly tap cylinder , test interference , grinding fixture for pt1 blade , grinding fixture pt stg 2 , plate cutting tool , handling tool , segment clue tool , handling tool , set of guides , det 2 of tm2689 g101 , lifting tool , engine support mount , setting & removal tool , balancing tool , blank , withdrawal tool , rear bearing seal removal tool , errection support , errection support , orientation tool , adaptation without target , adaptation with target , sheath , sheath , protector , removal tool , assembly support , fuel leak drain check tool , wrench & immobilizer , erection support , handling tool , adaptor fitting , adaptor fitting , wedge height , extractor , air intake cover , shuttle box , key , flow check tool , erosion / impact check tool , erosion / impact check tool , graduating rule , boroscope positioning support kit

Central Government/Public Sector

CTN :45197178

20 May, 2026 NA

Rourkela - Odisha

Tender For tools and tackles for plate mill.(16items) comprising of following: - soldering iron,dia:7-10mm,230vac,65w , - drill,pistol,hard plastic body,6mm , - crimping tool,0.5-16mm2 , - plier,crimping,hyd operated,25-400mm2 , - drive socket set,1/4in , - drilling machine,pillar,13mm,1440rpm , - chop/cut off saw,gco 2400j professional , - allen key extra long ball point set , - self adjust wire insul stripper,6mm2 , - grease gun,hand operated,lever type,1kg , - plier,comb side cutting,250mm , - drill bit set,hss,4-6mm,8mm,10mm,masonry , - disc,grinding,size:od:100,id:16,thk:6mm , - cutting wheel/disc,od:105,id:16,th:1.2mm , - tin cutter with spring,size: 10 , - crimping tool,f/cables upto 25mm2 ,

CTN :45197429

29 May, 2026 1.50 Lacs

Kheri - Uttar Pradesh

Tender For supply of blue tube , lead wire , cotton waste yarn , annabond 666 , emery cloth rough carbandam make , emery cloth fine carbandam make , restolien 500 ml , graphite powder 500 gm , steel wire brush , holedite 500 gm , grinding wheel ag 7 carbandam make , hss tool bit iso 5421 grade , carbide tip v shape , s s cutting wheel carbandam make , grinding wheel ag 4 carbandam make

Tooling Spares Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector